Answer:
The human brain is the body's control center, receiving and sending signals to other organs through the nervous system and through secreted hormones. It is responsible for our thoughts, feelings, memory storage and general perception of the world. The human heart is a responsible for pumping blood throughout our body
what blood vessels and chambers of the heart does a molecule of glucose absorbed through the gut passes on its way to an active muscle in the leg
Answer:
Blood capillaries
Explanation:
The walls of capillaries are just one cell thick. Capillaries therefore allow the exchange of molecules between the blood and the body's cells - molecules can diffuse across their walls. This exchange of molecules is not possible across the walls of other types of blood vessel.
A compound is found to contain 37.32 % phosphorus , 16.88 % nitrogen , and 45.79 % fluorine by
mass.
Question 1: The empirical formula for this compound is :
Question 2: The molar mass for this compound is 82.98 g/mol.
The Molecular formula for this compound is:
Answer: 1. The empirical formula is [tex]PNF_2[/tex]
2. The molecular formula is [tex]PNF_2[/tex]
Explanation:
If percentage are given then we are taking total mass is 100 grams.
So, the mass of each element is equal to the percentage given.
Mass of P = 37.32 g
Mass of N = 16.88 g
Mass of F = 45.79 g
Step 1 : convert given masses into moles.
Moles of P =[tex]\frac{\text{ given mass of P}}{\text{ molar mass of P}}= \frac{37.32g}{31g/mole}=1.20moles[/tex]
Moles of N =[tex]\frac{\text{ given mass of N}}{\text{ molar mass of N}}= \frac{16.88g}{14g/mole}=1.20moles[/tex]
Moles of F =[tex]\frac{\text{ given mass of F}}{\text{ molar mass of F}}= \frac{45.79g}{19g/mole}=2.41moles[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For P = [tex]\frac{1.20}{1.20}=1[/tex]
For N = [tex]\frac{1.20}{1.20}=1[/tex]
For F =[tex]\frac{2.41}{1.20}=2[/tex]
The ratio of P: N: F= 1: 1: 2
Hence the empirical formula is [tex]PNF_2[/tex]
The empirical weight of [tex]PNF_2[/tex]= 1(31)+1(14)+2(19)= 82.98 g.
The molecular weight = 82.98 g/mole
Now we have to calculate the molecular formula.
[tex]n=\frac{\text{Molecular weight}}{\text{Equivalent weight}}=\frac{82.98}{82.98}=1[/tex]
The molecular formula will be=[tex]1\times PNF_2=PNF_2[/tex]
In that question how( b) are enantiomers? I want the steps pleas ?
Answers:
1. firstly Start numbering from that carbon atom which would be nearest to chlorine .
2. then if u observed properly , both chlorine is attached are attached to 2nd carbon atom.
3.but in first one chlorine is on the left side
whereas in the second one chlorine right side.
p.s:
1. well, were u have number carbon three in above pic take it as C1 than C2( if u observed it is were Cl is attached to C2 ) than C3 ,C4.
2. Then similarly in second molecules where u have number C3 in above pic take it as C1 than C2 (if u observed , again Cl is attached to C2 but this time it is one on opposite sides.
now imagine if u kept first molecules on second one.
matching C1 C2 C3 C4 of first molecules with
C1 C2 C3 C4 of second molecule .
u will observed that in both of them Cl is on C2 but they in exactly opposite position
Explanation:
Enantiomers are a pair of molecules that exist in two forms that are mirror images of one another but cannot be superimposed one upon the other.
Help me I'm desperate :( no links or u will be reported
Answer:
Here is the answer from somewhere in the internet
How many mL of 0.715 M HCl is required to neutralize 1.25 grams of sodium carbonate? (producing carbonic acid)
I really couldn't find the answer since molarity and volume for sodium carbonate are not given.
I will mark the correct answer with steps as best answer.
Answer:
34 mL
Explanation:
We'll begin by calculating the number of mole in 1.25 g of sodium carbonate, Na₂CO₃. This can be obtained as follow:
Mass of Na₂CO₃ = 1.25 g
Molar mass of Na₂CO₃ = (23×2) + 12 + (16×3)
= 46 + 12 + 48
= 106 g/mol
Mole of Na₂CO₃ =?
Mole = mass /molar mass
Mole of Na₂CO₃ = 1.25 / 106
Mole of Na₂CO₃ = 0.012 mole
Next, we shall determine the number of mole HCl needed to react with 0.012 mole of Na₂CO₃.
The equation for the reaction is given below:
Na₂CO₃ + 2HCl —> H₂CO₃ + 2NaCl
From the balanced equation above,
1 mole of Na₂CO₃ reacted with 2 moles of HCl.
Therefore, 0.012 mole of Na₂CO₃ will react with = 0.012 × 2 = 0.024 mole of HCl.
Next, we shall determine the volume of HCl required for the reaction. This is illustrated:
Mole of HCl = 0.024 mole
Molarity of HCl = 0.715 M
Volume of HCl =?
Molarity = mole /Volume
0.715 = 0.024 / volume of HCl
Cross multiply
0.715 × volume of HCl = 0.024
Divide both side by 0.715
Volume of HCl = 0.024 / 0.715
Volume of HCl = 0.034 L
Finally, we shall convert 0.034 L to mL
This can be obtained as follow:
1 L = 1000 mL
Therefore,
0.034 L = 0.034 L × 1000 mL / 1 L
0.034 L = 34 mL
Therefore, 34 mL of HCl is needed for the reaction.
The amount of HCl required for counterbalancing 1.25 g of Na2CO3(Sodium Carbonate) would be:
- [tex]34 ml[/tex]
Given that,
Mass of Na2CO3 [tex]= 1.25 g[/tex]
To find the Moles of Na2CO3, we will find the molar mass of Na2CO3,
Molar Mass of or Na2CO3 [tex]= 106 g/mol[/tex]
So,
Moles of Na2CO3 [tex]= mass /molar mass[/tex]
[tex]= 1.25/106[/tex]
[tex]= 0.012 mol[/tex]
To determine the quantity of HCl required to display the reaction with 0.012 mol of Na2CO3
[tex]Na_{2} CO_{2} + 2HCl[/tex] → [tex]H_{2}CO_{3} + 2NaCl[/tex]
While balancing the equation, we know that [tex]0.012[/tex] × [tex]2 = 0.024 mole of HCl[/tex] is necessary to process the reaction.
Now,
As we know,
HCl moles [tex]= 0.024[/tex]
Molarity of HCl [tex]= 0.715 M[/tex]
∵ Quantity of HCl required = Moles/Molarity
[tex]= 0.024 / 0.715[/tex]
[tex]= 0.034 l[/tex] [tex]or 34ml[/tex]
Thus, 34 ml is the correct answer.
Learn more about 'Molarity' here:
brainly.com/question/12127540
When a balloon is blown up then let go air molecules rush out of the balloon and join the air molecules in earths atmosphere what happens to the enthalpy in the balloon?
Answer: It decreases
Answer: It decreases.
Explanation: a p e x :)
Please help meeee, I will brainliest. and
Put it into your own words, if u use from internet.
Answer:
energy is used to break bonds in reactants and energy is released when new bonds form in products.The law of conservation of energy states that matter cannot be created or destroyed. Whether a chemical reaction absorbs or releases energy there is no overall change in the amount of energy during the reaction.
Explanation:
Sorry if im wrong
According to the equation below, if 2.00 g of PCl5 react completely, how many grams of HCl will be produced?
PCl5+4H2O→H3PO4+5HCl
Answer:
1.75 g HCl
Explanation:
PCl₅ + 4H₂O → H₃PO₄ + 5HClFirst we convert 2.00 g of PCl₅ into moles, using its molar mass:
2.00 g ÷ 208.24 g/mol = 0.0096 mol PCl₅Then we convert PCl₅ moles into HCl moles, using the stoichiometric coefficients of the equation:
0.0096 mol PCl₅ * [tex]\frac{5molHCl}{1molPCl_5}[/tex] = 0.048 mol HClFinally we convert HCl moles into grams, using its molar mass:
0.048 mol HCl * 36.45 g/mol = 1.75 g HClWrite a formula and balanced equation for the following: solid copper metal reacts with aqueous silver nitrate to produce solid silver metal and aqueous copper Nitrate. How do I know if it will form copper (I) nitrate CuNO3 or copper (II) nitrate Cu(NO3)2 ?
Explanation:
copper (II) nitrate
Illustrate variety of substances of which an element can be part:
metal --> blue solution --> blue solid --> black solid --> blue solution (again) --> metal (again).When solid copper reacts with aqueous silver nitrate, the products are copper (II) nitrate and solid silver. and carbon monoxide gas produces solid iron and carbon dioxide gas.
Nitric oxide (NO) reacts with oxygen gas to produce nitrogen dioxide. A gaseous mixture contains 0.66 g of nitric oxide and 0.58 g of oxygen gas. After the reaction is complete, what mass of nitrogen dioxide is formed? Which reactant is in excess? How do you know? Suppose you actually recovered 0.91 g of nitrogen dioxide. What is your percent yield?
Answer:
NO is the limiting reagent.
In this reaction 0.886 mole of NO2 is produced
Explanation:
The chemical equation for this reaction is
2NO(g) + O2(g) → 2NO2(g)
In this limiting reagent reaction, 2 moles of NO reacts with one mole of O2 to produce 2 mole of 2NO2
0.886 mole of NO * (2 mole of NO2/2 mole of NO) = 0.886 mole of NO2
0.503 mole of O2 * (1 mole of NO2/1 mole of O2) = 1.01 mole of NO2
Hence, NO is the limiting reagent.
In this reaction 0.886 mole of NO2 is produced
How many moles of sodium sulfate are produced along with 5.86 moles of iron(III)
hydroxide?
Fe2(SO4)3 + 6NaOH → 3Na SO4 + 2Fe(OH)3
Answer:
5.86mol 2Fe(OH)3 * [3 mols Na SO4 / 2 mols Fe(OH)3] = 8.79 mols sodium sulfate
Explanation:
To solve this question you need to look at the ratio of sodium sulfate to iron(III) hydroxide. The ratio is 3 to 2, meaning that for every 3 moles of Na SO4 there are also 2 moles of Fe(OH)3. So, you can multiply 5.86 by (3/2) to find the mols of sodium sulfate.
What is orbit? A. An increase in centripetal motion and mass friction. B. Resistance of an object to avoid friction. C. Gravity causing a curved path as an object tries to go straight. D. How well an object floats.
Answer:
c
Explanation:
A solution contains 1.817 mg of CoSO4 (155.0 grams/mole) per mL. Calculate the volume (in mL) of 0.009795 M Zn2 needed to titrate the excess complexing reagent after the addition of 70.00 mL of 0.009005 M EDTA to a 20.00 mL aliquot of the Co2 solution.
Answer:
85.952 ml [tex]Zn^2^+[/tex] needed to titrate the excess complexing reagent .
Explanation:
Lets calculate
After addition of 80 ml of EDTA the solution becomes = 20 + 70 = 90 ml
As the number of moles of [tex]CoSO_4[/tex] =[tex]\frac{Given mass }{molar mass}[/tex]
=[tex]\frac{1.817}{155}[/tex]
=0.01172
Molarity = [tex]\frac{no. of moles}{volume of solution}[/tex]
=[tex]\frac{0.01172}{20}[/tex]
=0.000586 moles
Excess of EDTA = concentration of EDTA - concentration of CoSO4
= 0.009005 - 0.000586
= 0.008419 M
As M1V1 ( Excess of EDTA ) = M2V2 [tex](Zn^2^+)[/tex]
[tex]0.008419\times100ml=0.009795\times V2[/tex]
[tex]V2=\frac{0.008419\times100}{0.009795}[/tex]
V2 =85.952 ml
Therefore , 85.952 ml [tex]Zn^2^+[/tex] needed to titrate the excess complexing reagent .
A gas has a volume of 10 L at 200 K and a pressure of 1.5 atm . What would the volume of the gas be at 300 K and 2atm of pressure ?
Answer:
jeyjeyjetnetney
Explanation:
thmrhmrhmrum
A flask contains a 1.00 mole of neon gas and 2.00 moles of argon gas. If the total pressure of the gases is 150.0 kPa, then what is the partial pressure of the argon gas in kPa?
Answer:
Partial pressure of Ar = 100.5 KPa
Explanation:
The following data were obtained from the question:
Number of mole of Ne = 1 mole
Number of mole of Ar = 2 moles
Total pressure = 150.0 KPa
Partial pressure of Ar =?
Next, we shall determine the mole fraction of Argon (Ar). This can be obtained as follow:
Number of mole of Ne = 1 mole
Number of mole of Ar = 2 moles
Total mole = 1 + 2 = 3 moles
Mole fraction of Ar = mole of Ar / total mole
Mole fraction of Ar = 2/3
Mole fraction of Ar = 0.67 mole
Finally, we shall determine the partial pressure of argon (Ar). This can be obtained as follow:
Mole fraction of Ar = 0.67 mole
Total pressure = 150.0 KPa
Partial pressure of Ar =?
Partial pressure = mole fraction of gas × total pressure
Partial pressure of Ar = 0.67 × 150
Partial pressure of Ar = 100.5 KPa
A 1.om sample of dry air at
at 25°c at 786mmHg contains 0.925g Nitrogen Plus other gases including oxygen, argon and carbon dioxide. what is the partial pressure of Na with the air sample.
Answer:
Is the question not supposed to be what is the partial pressure of Nitrogen not Sodium
N2 + H2 --> NH3 (unbalanced) How many moles of NH3 are produced when 6.3 moles of H2 gas react with N2 gas?
Answer:
4.2 mol NH3
Explanation:
First, balance your reaction.
N2 + 3H2 --> 2NH3
Multiply 6.3 mol H2 by the mole ratio of 2 mol NH3 for every 3 mol H2 to get moles of NH3 produced.
6.3 mol H2 • (2 mol NH3 / 3 mol H2) = 4.2 mol NH3
why do we need digital technology in school?
Answer: See explanation
Explanation:
Digital technologies refers to the electronic tools, or devices that can be used to generate data, store them or process data. e.g. mobile phones, ebooks etc.
Digital learning makes use of technology. Effective use of digital learning tools can help increase the engagement of students. This csn.aksi be used by the teachers to enhance personalized learning and also improve the lesson plans.
Digital technology can enhance collaboration, and communication with the students. The use of videos, robots, virtual classrooms, augmented reality and other technologies can bring about fun and foster inquisitiveness.
Suppose you have a 1:1:1 by weight mixture of three solid compounds, salicylic acid 4-nitroaniline naphthalene. You dissolve 1 gram of this mixture in diethyl ether, and place a tiny drop of the ether solution on a TLC plate. After developing the TLC plate, you see three spots. Which compound would would you expect to have the largest Rf value
Answer:
The correct answer is - 4-nitroaniline.
Explanation:
It is given that all three solid compounds salicylic acid + 4-nitroaniline + naphthalene are equal in the ratio in the mixture and then 1 gram of this mixture is dissolved in the diethyl ether and run a drop of the solution on TLC plate. This plate shows three spots.
The salicylic acid and naphthalene would stay dissolved in the diethyl ether solution due to the 4-nitroaniline could be extracted by adding aqueous acid and involve in the aqueous layer and thus spot of 4-nitroaniline would be with largest Rf value.
Data Collection
Mass of the original sample of mixture (g) 1.558
Mass of recovered naphthalene (g) 0.483
Mass of recovered 3-nitroaniline (g) 0.499
Mass of recovered benzoic acid (g) 0.467
Calculations:
a. % by mass of naphthalene in original sample.
b. % by mass of 3-nitroaniline in original sample.
c. % by mass of benzoic acid in original sample.
d. total percent recovered.
Answer:
For a): The mass percent of naphthalene in the original sample is 31.00 %.
For b): The mass percent of 3-nitroaniline in the original sample is 32.03 %.
For c): The mass percent of benzoic acid in the original sample is 29.97 %.
For d): The total percent recovered is 93.00 %.
Explanation:
Percentage by mass is defined as the ratio of the mass of a substance to the mass of the solution multiplied by 100. The formula used for this is:
[tex]\text{Percent by mass}=\frac{\text{Mass of substance}}{\text{Mass of a solution}} \times 100[/tex] ......(1)
a):
Mass of naphthalene = 0.483 g
Mass of the sample = 1.558 g
Plugging values in equation 1:
[tex]\%\text{ mass of naphthalene}=\frac{0.483 g}{1.558}\times 100\\\\\%\text{ mass of naphthalene}=31.00 \%[/tex]
b):
Mass of 3-nitroaniline = 0.499 g
Mass of the sample = 1.558 g
Plugging values in equation 1:
[tex]\%\text{ mass of 3-nitroaniline}=\frac{0.499 g}{1.558}\times 100\\\\\%\text{ mass of 3-nitroaniline}=32.03 \%[/tex]
c):
Mass of benzoic acid = 0.467 g
Mass of the sample = 1.558 g
Plugging values in equation 1:
[tex]\%\text{ mass of benzoic acid}=\frac{0.467 g}{1.558}\times 100\\\\\%\text{ mass of benozic acid}=29.97 \%[/tex]
d):
Total mass recovered = [0.483 + 0.499 + 0.467] = 1.449 g
Mass of the sample = 1.558 g
Plugging values in equation 1:
[tex]\text{Total percent recovered}=\frac{1.449 g}{1.558}\times 100\\\\\text{Total percent recovered}=93.00\%[/tex]
In what industry do fertilizers and pesticides wash off and contaminate water supplies?Construction Oil Transportation Agriculture
Answer:
The answer is agriculture.
Explanation:
Answer: Agriculture
Explanation:
I got it right on my exam
The particle in the atom with a negative charge is the...
Answer: electrons
Explanation: An atom consists of a positively charged nucleus, surrounded by one or more negatively charged particles called electrons.
Which of the following is an example of synthesis?
A) HgO + Cl2-->HgCl + O2
B) Na + Br2 --> NaBr
C) KClO3 --> KCl + O2
D) Cl2 + NaBr --> NaCl + Br2
Answer:
B
Explanation:
8. 53.4 mL of a 1.50 M solution of NaCl is on hand, but you need some 0.800 M
solution. How many mL of 0.800 M can you make?
9. A stock solution of 1.00 M NaCl is available. How many milliliters are needed
to make 100.0 mL of 0.750 M
10.2.00 L of 0.800 M NaNO, must be prepared from a solution known to be 1.50
M in concentration. How many mL are required?
PLS answer ASAP!! WILL MARK AS BRAINLYIST!
Atoms of which elements form bonds without satisfying the octet rule?
Answer:
Helium and hydrogen......
Why does a red object appear red?
O A. It reflects light of wavelengths other than red.
OB. It absorbs light of red wavelengths.
O C. It absorbs light of wavelengths other than red.
O D. It reflects infrared radiation.
Right answers only for brainly
Answer:
Objects appear different colours because they absorb some colours (wavelengths) and reflected or transmit other colours. ... For example, a red shirt looks red because the dye molecules in the fabric have absorbed the wavelengths of light from the violet/blue end of the spectrum
A red object appear red because it absorbs light of wavelengths other than red. Therefore, option C is correct.
What is wavelength ?The distance between identical points (adjacent crests) in adjacent cycles of a waveform signal propagated in space or along a wire is defined as the wavelength. This length is typically specified in wireless systems in meters (m), centimeters (cm), or millimeters (mm) (mm).
A transverse wave's wavelength is defined as the distance between two adjacent crests. A longitudinal wave's wavelength can be calculated as the distance between two adjacent compressions.
The wavelengths that are reflected or transmitted are what we see as colors. A red shirt, for example, appears red because the dye molecules in the fabric have absorbed light wavelengths from the violet/blue end of the spectrum. The only light reflected from the shirt is red light.
Thus, option C is correct.
To learn more about the wavelength, follow the link;
https://brainly.com/question/13533093
#SPJ6
Describe the development of the modern periodic table. Include contributions made by Lavoisier, Newlands, Mendeleev, and Moseley.
Answer: Lavoisier organized a list of the known elements of his day as four categories. Newlands was the first to organize the elements and show that properties repeated in a periodic way. Mendeleev and Meyer proposed periodic tables showing a relationship between atomic mass and elemental properties. Moseley organized the elements by atomic number instead of atomic mass.
Explanation:
Arrange the following 0.10 M solutions from most acidic to most basic. Justify your rankings.
KOH
KNO3
KCN
NH4Cl
HCl
assuming fixed shape when heated?
Answer:
Assuming that the atmospheric pressure is standard, the temperature will rise steadily until it reaches 100°C
What is the mass in grams of 3.40 x 10 24 atoms he
Answer:
Avogadro's constant says that
1
mole of any atom contains
6.022
⋅
10
23
atoms. In this case you have
3.40
⋅
10
22
atoms:
3.40
⋅
10
22
atoms
6.022
⋅
10
23
atoms
mol
=
5.65
⋅
10
−
2
m
o
l
Step 2
The atomic mass of helium (He) will give you the weight of one mole of this molecule:
1
mol =
4.00
gram:
4.00
g
mol
⋅
5.65
⋅
10
−
2
mol
=
0.226
g
So the
3.40
⋅
10
22
helium atoms weigh
0.226
gram
.
Explanation:
Mark as brainlyiest