Answer:
even though the particles of a liquid are moving, they are attracted to each other so they don't spread far apart to become a gas.
Explanation:
"but some do when they evaporate"
In liquids, the particles are allowed to move freely rather than the solid. The gaseous particles can move more freely than liquids.
Particles in liquids:In liquids, the particles are placed randomly and thus are allowed to move freely but they do not become a gas as liquids are slightly less compressible than gases. Even though the particles of a liquid are moving, they are attracted to each other so they don't just spread far apart to become a gas.
Find more information about Liquids here:
brainly.com/question/752663
Which of the following is an extensive property of a sample of aluminum?
Answer:
Entropy,mass and volume.... I think
Mass is the extensive property of a sample of aluminum. Therefore, option (A) is correct.
What is the extensive property of matter?The extensive property can be described as a physical property of matter that changes with a change in the size and shape of the matter. Therefore, the extensive property of any substance varies directly with the mass.
Extensive properties are the value of the property of the system that must be equal to the sum of the values of different parts of the system. These properties depend on the amount of matter contained in the system.
Examples of Extensive properties are temperature, pressure, density, boiling point, etc. The ratio of the two extensive properties is an intensive property such as density.
The mass of a sample of aluminum is an example of extensive property as it depends on the amount of aluminum in the given sample. This property of the sample is proportional to the size of the system.
Learn more about the extensive property, here:
https://brainly.com/question/13733851
#SPJ6
Your question is incomplete, most probably the complete question was,
Which of the following is an extensive property of a sample of aluminum?
A) Mass
B) Temperature
C) Pressure
D) Density
What is the formula for nitrogen monoxide?
O N203
O NO
O N₂O,
O None of the answers are correct
what is hard water and what causes hardness of water
Answer:
hard water is ice
Explanation:
ice is formed as the water temperature decreases and then it freezes
Would it be possible for electrons in the 2p orbitals to be inside the 2s orbital?
(Please explain)
Answer:
Yes
Explanation:
You can have 2s and have part of the 2p of the row in the p section.
Which describes how rubbing fur on a rubber rod makes the rod negatively charged. Select one: A. Electrons move from the fur to the rubber rod. B. Electrons move from the rubber rod to the fur. C. Protons move from the rubber rod to the fur.
Answer:
A
Explanation:
Rubbing fur on a rubber rod results in the rod becoming negatively charged as a result of the movement of electrons from the fur to the rubber rod.
The process is called triboelectric charging. When the two substances are rubbed together, their atoms come into close proximity with each other and their electron clouds interact with the fur losing electrons to the rubber due to the fact that the atoms of the rubber have higher affinities for electrons than the atoms of the fur. Hence, the fur becomes positively charged while the rubber becomes negatively charged.
how can animal fossils help us understand the earth
Answer:
Some animals and plant are only known to us as fossils. hope this helps. and have a nice day:)
PLEASE HELP ASAP I EILL GIVE 100 POINTS!!! Kristy is on the track team. She runs the one kilometer race by going four times around the circular track. How does Kristy velocity change.
A. Her velocity changes countinually since her direction constantly changes
B. Her velocity depends on only on how she paces herself during the race
C. Her velocity is the same as her speed
D. Her speed changes at the same rate as velocity
Answer:A
Explanation:
Which of the following best describes the Valence Shell Electron Pair Repulsion Theory (VSEPR)?
Answer:
Electron pairs are arranged as far apart from each other as possible.
Explanation:
Like charges repel therefore, VSEPR theory is the "...repulsions between electron pairs present in the valence shell of the central atom."
Which of the following is TRUE about when two atoms form a bond? a. Repulsion is greater than attraction b. Neither atoms will have a full valence shell c. Potential energy is at a minimum
Answer:
b: Neither atoms will have a full valence shell
Explanation:
I think sooo
Which element is a metal? A. K
B. Kr
C. F
D. He
please help, if you’re right i’ll give brainliest and 35 more points
Answer: A
Explanation: Potassium is a metal.
is aluminum Pure or Impure?
Answer:
The aluminium is impure
5. What do the data in your graphs tell you? Explain in one or two sentences what trend the reader should observe in each of your graphs. (Science Lab Report, if you don't know what the answer is please don't answer-)
Answer:
Graphs are a common method to visually illustrate relationships in the data. The purpose of a graph is to present data that are too numerous or complicated to be described, and If the data shows pronounced trends or reveals relations between variables, a graph should be used.
Explanation:
literally bro i had the same answer for my actual project for edge
Answer: Graphs are a common method to visually illustrate relationships in the data. The purpose of a graph is to present data that are too numerous or complicated to be described, and If the data shows pronounced trends or reveals relations between variables, a graph should be used.
Explanation:
Which statement describes how chemical formulas, such as H2O, represent compounds?
They show the types of molecules that make up an atom.
They show the elements that make up a compound.
They show the three-dimensional shape of a molecule.
They show the types of bonds that exist between elements.
Answer: B. They show the elements that make up a compound
Explanation:
Answer:
B
Explanation:
A sample of which element could have a volume of 1.5 cubic centimeters (cm3) and a mass of 7.5 grams (g)?
Answer:
5 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{7.5}{1.5} \\ [/tex]
We have the final answer as
5 g/cm³Hope this helps you
The independent variable and dependent and constant
Answer:
Explanation:
independent-longer wire
dependent-bulbs being brighter
constants-lamp brand and so on
Use the decoder to get the lock combination
Answer:
u didnt attach an image or anything so this is quite confusing.
Explanation:
??
Answer:
Okay
Explanation:
The repeating subunits that are responsible for the chance of a crystal are know as
unit cells
heavy nuclei
light electrons
amorphous cells
Critical thinking : Place an unmagnetized piece of iron in a magnetic field (eg iron filings near a magnet). Why is it attracted to the magnet?
Magnets attract iron due to the influence of their magnetic field upon the iron. Before a piece of iron enters the magnet, the polarization of the irons atoms is random. When exposed to the magnetic field, the atoms begin to align their electrons with the flow of the magnetic field, which makes the iron magnetized as well. This, in turn, creates an attraction between the two magnetized objects. This is why a piece of iron that is exposed to a magnet becomes magnetic for some time afterward.
How do you determine if you have a covalent bond?
Answer:
If the electronegativity difference (usually called ΔEN) is less than 0.5, then the bond is nonpolar covalent. If the ΔEN is between 0.5 and 1.6, the bond is considered polar covalent. If the ΔEN is greater than 2.0, then the bond is ionic.
Explanation:
Hope this helped :)
Susie cooked sausages on a barbecue. Fat and water in the sausages changed state. which two changes of state occur during this process? a. Fat melted b. Water evaporated
Answer:
The options a and b are correct
Explanation:
This options provided to the question are the answers to the question. But for clarification. When the fat melts, the change of state that occurs here is from solid to liquid (which is called melting) while the change of state that occurs when the water evaporated is from liquid to gas (which is called evaporation).
Which of the following most completely describes a redox reaction?
O A. A chemical decomposition reaction
B. A hydrocarbon combustion reaction
O c. A reaction resulting in electron sharing
D. An oxidation and reduction reaction
Answer:
D.
Explanation:
Because i just copied the person above tbh, and i also got it right in the quiz
To solve such this we must know the concept of redox reaction. Therefore, the correct option is option D that is an oxidation and reduction reaction.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.
Redox reaction is a chemical reaction where oxidation and reduction takes place simultaneously. Oxidation is loss of electrons and reduction is gain of electrons. The electron transfer from oxidant to reductant.
Therefore, the correct option is option D that is an oxidation and reduction reaction.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ2
when an atom loses electrons, what does it become?
method used to separate ethanol from propanol
Which process creates new cells from existing cells?
A. Cell division
B.Cell limitation
C.Cell addition
D.No answer text provided.
Answer:
the answer is cell division
Explanation:
cell division is the process by which a present cell divides into two or more daughter cells.
the process can also be called cell cycle
One litre of hydrogen at STP weight 0.09gm of 2 litre of gas at STP weight 2.880gm. Calculate the vapour density and molecular weight of gas.
Answer:
we know, at STP ( standard temperature and pressure).
we know, volume of 1 mole of gas = 22.4L
weight of 1 Litre of hydrogen gas = 0.09g
so, weight of 22.4 litres of hydrogen gas = 22.4 × 0.09 = 2.016g ≈ 2g = molecular weight of hydrogen gas.
similarly,
weight of 2L of a gas = 2.88gm
so, weight of 22.4 L of the gas = 2.88 × 22.4/2 = 2.88 × 11.2 = 32.256g
hence, molecular weight of the gas = 32.256g
vapor density = molecular weight/2
= 32.256/2 = 16.128g
hence, vapor density of the gas is 16.128g.
Explanation:
What can you infer about particle's size?
Answer:
particle size analysis, particle size measurement, or simply particle sizing is the collective name of the technical procedures, or laboratory techniques which determines the size range, and/or the average, or mean size of the particles in a powder or liquid sample.
Explanation:
HELP!!!!!! WILL MARK BRAINLIEST!!!
Fill in the blank.
Atoms are held together in molecules by _______.
_______ are compounds with the same chemical formula but different molecular structures.
A/An _______ indicates the ratio of atoms in a molecule.
_______ are similar to molecular formulas but show how atoms are bonded together.
When two atoms of the same element combine to form a molecule, this is called a _______ molecule.
The breaking and forming of bonds between atoms in substances results in changes in the _______ contained in the substances.
Respond to the following based on your reading.
Give two purposes for the systematic naming of chemicals.
Name the elements in the molecule H2SO4 and tell how many atoms of each element are present.
How many molecules are represented by 3CO2?
Answer:
1. Covalent Bond
2. Isomers
3. Molecular and Empirical Formula
4. The Structural Formula
5. Diatomic Molecules
1. Hydrogen and Tetraoxosulphate. There are 2 atoms of hydrogen and 4 atoms of tetraoxosulphate.
Explanation:
Sorry, I wrote all I know
The formula for one molecule of sucrose is shown below.
C12H22011
How many atoms in all are in one molecule of sucrose?
Answer:
45
Explanation:
There are 12 Carbons
There are 22 Hydrogens
There are 11 Oxygens.
I think the answer is either 0 or 45. But the wording is very sloppy. It is not really atoms that are present. There are ions.
Go with 45 but hold your nose when writing your answer.
What mass of ethanol will release 410.0 J of heat when it cools
from 32.2°C to 19.1°C?
The specific heat of ethanol is 2.44 J/gºC.
12.8 g
(Don’t have explanation but it is right on CK-12)
calculate the weight of 5 atoms of Mg.
Answer:
2.0179701e-22
Explanation: