Answer:
Element and compounds are the pure substances but mixture is not a pure substance.
Explanation:
Element and compounds are the pure substances in which element comprise of only one atom while compound is formed by the chemical combination of more than one element in a fixed ratio by mass while mixture is also made up of more that one substances but they are combine physically not chemically. Elements, compounds, mixtures are very important because all the materials we used in our daily life are formed from elements, compounds and mixtures.
If you prepare a solution by adding sufficient amount of solute so that after heating and cooling the solution there is a visible amount of solid solute left in the bottom of the beaker, the solution would be considered ________.
Answer:
saturated
Explanation:
Calcium carbonate can break down to form calcium oxide and carbon dioxide.
CaCO3 → CaO + CO2
The oxygen atoms on the product side are
Answer:
balanced because the total number of oxygen atoms is 3.
1. There are how many mol of oxygen in 3.5 mol of caffeine.
Answer:
7 mol
Explanation:
Caffeine molecular formula C8H10N4O2. It has 2 atoms of oxygen.
C8H10N4O2 - 2O
1 mol 2 mol
3.5 mol x mol
x = 3.5*2/1 = 7 mol
Given the equation 2KCIO3(s)=2KCI(s) + 3O2(g). A 3.00-g sample of KCIO3 is decomposed and the oxygen at 24 degrees C and 0.982 atm is collected. What volume of oxygen gas will be collected assuming 100% yield?
Answer:
0.912 L or 912 mL
Explanation:
M(KClO3) = 122.55 g/mol
3.00 g KClO3 * 1 mol/122.55 g = 3.00/122.55 mol =0.02449 mol
2KCIO3(s)=2KCI(s) + 3O2(g)
from reaction 2 mol 3 mol
given 0.02449 mol x
x = 0.02449*3/2 =0.03673 mol O2
T = 24 + 273.15 = 297.15 K
PV = nRT
V= nRT/P = (0.03673 mol*0.082057 L*atm/K*mol*297.15 K)/0.982 atm =
= 0.912 L or 912 mL
2. Points
Which of the following is not a characteristic of a transverse mechanical
wave?
A. It travels at less than the speed of light.
B. It involves displacing the medium perpendicular to the motion of
the wave
C. It looks a little bit like a snake.
D. It is also known as a compression wave.
Answer:
D
Explanation:
Logitudinal waves also known as compression waves.
It involves displacing the medium perpendicular to the motion of the wave is not a characteristic of a transverse mechanical wave. Option B is correct.
What are transverse mechanical waves?A transverse mechanical wave is a disturbance created by it to transfer energy from one point to another. while the proposition happens the particle present within the medium get vibrates.
in a transverse wave, the particle present will vibrate up and down and are perpendicular to the wave's propagation direction. The particles shake in a directional wave in the longitudinal wave propagation.
Therefore, is not a characteristic of a transverse mechanical wave. Option B is correct. It involves displacing the medium perpendicular to the motion of the wave.
Learn more about transverse mechanical waves, here:
https://brainly.com/question/23374194
#SPJ6
The equilibrium constant for the reaction NO2(g)+NO3(g)→N2O5(g) is 2.1x10-20 , therefore: a. At equilibrium, the concentration of products and reactants is about the same. b. At equilibrium, the concentration of products is greater than the reactants. c. At equilibrium, the concentration of reactants is greater than the products
Answer: c. At equilibrium, the concentration of reactants is greater than the products
Explanation:
Equilibrium constant for a reaction is the ratio of concentration of products to the concentration of reactants each raised to the power its stoichiometric coefficients.
For the reaction:
[tex]NO_2(g)+NO_3(g)\rightleftharpoons N_2O_5(g)[/tex]
Equilibrium constant is given as:
[tex]K_{eq}=\frac{[N_2O_5]}{[NO_2]\times [NO_3]}[/tex]
[tex]2.1\times 10^{-20}=\frac{[N_2O_5]}{[NO_2]\times [NO_3]}[/tex]
When
a) K > 1, the concentration of products is greater than the concentration of reactants
b) K < 1, the concentration of reactants is greater than the concentration of products
c) K= 1, the reaction is at equilibrium, the concentration of reactants is equal to the concentration of products
Thus as [tex]K_{eq}[/tex] is [tex]2.1\times 10^{-20}[/tex] which is less than 1,
the concentration of reactants is greater than the concentration of products
Coefficient of balanced equation: __Fe + ___020) — _Fe_036)
Answer:
- Four for iron, three for oxygen and 2 for iron (III) oxide:
[tex]4Fe+3O_2\rightarrow 2Fe_2O_3[/tex]
Explanation:
Hello,
In this case, the oxidation of iron is a widely acknowledged reaction occurring in ships and other machines exposed to the air or highly oxidizing medias. Thus, by the effect of oxygen, iron undergoes oxidation typically to iron (III) oxide:
[tex]Fe+O_2\rightarrow Fe_2O_3[/tex]
Nonetheless, the law of conservation of mass must be respected, therefore the coefficients balancing the reaction are four for iron, three for oxygen and 2 for iron (III) oxide:
[tex]4Fe+3O_2\rightarrow 2Fe_2O_3[/tex]
Best regards.
if 196L of air at 1 atm is compressed to 2600mL,what is the new temperature?
Answer:
Around 3.62 degrees kelvin
Explanation:
Assuming this is at STP:
The first step is to convert 2600mL to liters. There are 1000 milliliters in a liter, meaning that this is equal to 2.6L.
Now:
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\\\\\dfrac{196(1)}{273}=\dfrac{2.6(1)}{T_2} \\\\\\T_2\approx 3.62K[/tex]
Hope this helps!
a) A molecule of DNA contains 140 A bases, how many T bases will it contain? Plz help ❤️
Answer:
140 T or thymine base
Explanation:
Adenine pairs with Thymine in DNA thus the number of adenine will always equal number of thymine (unless some sort of mutation), therefore in this problem you have 140 A so you have 140 T as well. Remember: Adenine (A) and Thymine(T) is equal, & Cytosine (C) and Guanine (G) is equal
How many moles of PC15 can be produced from 51.0 g of Cl2 (and excess P4)?
Express your answer to three significant figures and include the appropriate units.
LIT....ITS NOT .227 or .228!!!!
Answer:
0.287 mole of PCl5.
Explanation:
We'll begin by calculating the number of mole in 51g of Cl2. This is illustrated below:
Molar mass of Cl2 = 2 x 35.5 = 71g/mol
Mass of Cl2 = 51g
Number of mole of Cl2 =..?
Mole = Mass /Molar Mass
Number of mole of Cl2 = 51/71 = 0.718 mole
Next, we shall write the balanced equation for the reaction. This is given below:
P4 + 10Cl2 → 4PCl5
Finally, we determine the number of mole of PCl5 produced from the reaction as follow:
From the balanced equation above,
10 moles of Cl2 reacted to produce 4 moles of PCl5.
Therefore, 0.718 mole of Cl2 will react to produce = (0.718 x 4)/10 = 0.287 mole of PCl5.
Therefore, 0.287 mole of PCl5 is produced from the reaction.
Enter your answer in the provided box. To make use of an ionic hydrate for storing solar energy, you place 409.0 kg of sodium sulfate decahydrate on your house roof. Assuming complete reaction and 100% efficiency of heat transfer, how much heat (in kJ) is released to your house at night
Answer:
409.0 kg of sodium sulfate decahydrate will produce 4.49×10⁵ kJ
of heat energy.
Explanation:
CHECK THE COMPLETE QUESTION BELOW
To make use of an ionic hydrate for storing solar energy, you place 409.0 kg of sodium sulfate decahydrate on your house roof. Assuming complete reaction and 100% efficiency of heat transfer, how much heat (in kJ) is released to your house at night? Note that sodium sulfate decahydrate will transfer 354 kJ/mol
EXPLANATION
Here we were asked to calculate the amount of heat will be generated by 409.0 kg of sodium sulfate decahydrate at night assuming there Isa complete reaction and 100% efficiency of heat transfer in the process
The molecular weight of sodium sulfate decahydrate (H₂₀Na₂O₁₄S) is needed here, so it must be firstly calculated.
The molecular weight of sodium sulfate decahydrate (H₂₀Na₂O₁₄S)
( 1*20) + (22.98*2) + (16*14)+ (32*14)= 322.186 g/mol.
Thus 409.0 kg of H₂₀Na₂O₁₄S will have a value which is equivalent to = (409000g)/(322.186 g/mol.)
=1269.453mol of H₂₀Na₂O₁₄S.
But it was stated in the the question that per mole of H₂₀Na₂O₁₄S will transfer 354 kJ heat.
Therefore, 1269.453mol will transfer 1269.453× 354 kJ = 4.49×10⁵ kJ of heat.
Hence, 409.0 kg of sodium sulfate decahydrate will produce
4.49×10⁵ kJ of heat energy.
A stock solution will be prepared by mixing the following chemicals together:
3.0 mL of 0.00200 M KSCN
10.0 mL of 0.200 M Fe(NO3)3
17.0 mL of 0.5 M HNO3
Determine the molar concentration of Fe(NO3)3 in the stock solution.
Answer:
0.067M Fe(NO3)3
Explanation:
A stock solution is a concentrated solution that is diluted to prepare the solutions that you will use.
The volume of the stock solution is 3.0mL + 10.0mL + 17.0mL= 30.0mL.
The ratio between volume of the aliquot (10.0mL) and total volume (30.0mL) is called dilution factor, that is: 30.0mL / 10.0mL = 3
That means the Fe(NO3)3 is diluted 3 times. That means the molar concentration of the stock solution is:
0.200M / 3 =
0.067M Fe(NO3)3Calculate the osmotic pressure of a solution prepared by dissolving 65.0 g of Na2SO4 in enough water to make 500 mL of solution at 20°C. (Assume no ion pairing – in other words, assume that the electrolyte completely dissociates into its constituent ions.)
Answer:
66.0 atm
Explanation:
We can calculate the osmotic pressure (π) using the following expression.
[tex]\pi = i \times M \times R \times T[/tex]
where,
i: van 't Hoff indexM: molarityR: ideal gas constantT: absolute temperatureStep 1: Calculate i
Sodium sulfate completely dissociates according to the following equation.
Na₂SO₄ ⇒ 2 Na⁺ + SO₄²⁻
Since it produces 3 ions, i = 3.
Step 2: Calculate M
We can calculate the molarity of Na₂SO₄ using the following expression.
[tex]M = \frac{mass\ of\ solute }{molar\ mass\ of\ solute\ \times liters\ of\ solution} = \frac{65.0g}{142.04g/mol \times 0.500L} =0.915M[/tex]
Step 3: Calculate T
We will use the following expression.
K = °C + 273.15
K = 20°C + 273.15 = 293 K
Step 4: Calculate π
[tex]\pi = 3 \times 0.915M \times \frac{0.08206atm.L}{mol.K} \times 293K =66.0 atm[/tex]
Calculate the standard entropy of reaction at 298 K for the reaction Hg(liq) + Cl2(g) → HgCl2(s) The standard molar entropies of the species at that temperature are: Sºm (Hg,liq) = 76.02 J / (K mol) ; Sºm (Cl2,g) = 223.07 J / (K mol) ; Sºm (HgCl2,s) = 146.0 J / (K mol)
Answer:
−153.1 J / (K mol)
Explanation:
Calculate the standard entropy of reaction at 298 K for the reaction Hg(liq) + Cl2(g) → HgCl2(s) The standard molar entropies of the species at that temperature are: Sºm (Hg,liq) = 76.02 J / (K mol) ; Sºm (Cl2,g) = 223.07 J / (K mol) ; Sºm (HgCl2,s) = 146.0 J / (K mol)
Hg(liq) + Cl2(g) → HgCl2(s)
Given that;
The standard molar entropies of the species at that temperature are:
Sºm (Hg,liq) = 76.02 J / (K mol) ;
Sºm (Cl2,g) = 223.07 J / (K mol) ;
Sºm (HgCl2,s) = 146.0 J / (K mol)
The standard molar entropies of reaction = Sºm[products] - Sºm [ reactants]
= 146.0 J / (K mol) – [76.02 J / (K mol) +223.07 J / (K mol) ]
= -153.09 J / (K mol)
= or -153.1 J / (K mol)
Hence the answer is −153.1 J / (K mol)
The substances nitrogen monoxide and hydrogen gas react to form nitrogen gas and water. Unbalanced equation: NO (g) + H2 (g) N2 (g) + H2O (l) In one reaction, 76.2 g of H2O is produced. What amount (in mol) of H2 was consumed? What mass (in grams) of N2 is produced?
Answer:
H2 consumed 4.22 mol
N2 produced 59.107 g
Explanation:
Balanced equation:
2NO (g) + 2H2 (g) N2 (g) + 2H2O (l)
To perform the calculations, the molecular weights of the following compounds must be known:H2O MW = 18.02 g/mol
N2 MW = 28.01 g/mol
To determine the moles of H2O produced, the following formula should be used:
[tex]MW=\frac{mass}{mol}[/tex]
The value of moles is cleared:
[tex]mol=\frac{mass}{MW} =\frac{76.2g}{18.02\frac{g}{mol} } =4.22 mol[/tex]
Now, to calculate the grams of N2 consumed, we look at the balanced equation and note that 2 moles of H2 produce 1 mole of N2. Therefore, through said observation, the amount of moles of H2 consumed can be determined.2 mol H2 ⇒ 1 mol N2
4.22 mol H2 ⇒ X
[tex]X=\frac{4.22mol*1 mol}{2 mol} =2.11 mol[/tex]
To calculate the mass of H2 consumed, the molecular weight equation is used again:
[tex]mass=MW*mol=28.013\frac{g}{mol}*2.11mol=59.107g[/tex]
A thermometer is placed in water in order to measure the water’s temperature. What would cause the liquid in the thermometer to rise? The molecules in the water move closer together. The molecules in the thermometer’s liquid spread apart. The kinetic energy of the water molecules decreases. The kinetic energy of the thermometer’s liquid molecules decreases.
Answer: The molecules in the thermometer's liquid spread apart.
Explanation:
Mercury is the only metal that remains liquid at room temperature. It has a high coefficient of expansion therefore the its level rises when exposed to a temperature range. It can detect a slight change in temperature. It has a high boiling point.
When the thermometer is placed in the water to measure the temperature, the molecules of thermometer liquid that is mercury only will spread due to high coefficient of expansion. This can be seen as rise in temperature.
Answer:
B
Explanation:
Just did the test
When 8.1 g of an unknown non-electrolyte is dissolved in 50.0 g of carbon tetrachloride, the boiling point increased by 3.67 degrees C. If the Kbp of the solvent is 4.95 K/m, calculate the molar mass of the unknown solute.
Answer:
218.3 g/mol
Explanation:
Boiling point elevation occurs when a solute is added to a solvent increasing the boiling point of the solution with regard to the pure solvent.
The law is:
ΔT = Kb×m×i
Where ΔT is change in temperature (3.67°C), Kb is the boiling point constant of the solvent (4.95°C/m), m is molality of the solution and i is Van't Hoff factor (1 for a non-electrolyte).
3.67°C = 4.95°C/m×m×i
0.7414m = molality of the solution (Moles solute / kg solvent).
As the mass of the solvent is 50.0g = 0.0500kg:
0.7414m = Moles solute / 0.0500kg
0.0371 = moles of solute
As the mass of the solute is 8.1g, molar mass of the solute (Ratio between mass in g and moles) is:
8.1g / 0.0371mol =
218.3 g/molWhat is the oxidation number of nitrogen in N20?
00
O+1
O +2
O +4
A gas occupies a volume of 180 mL at 35 °C and 95.9 kPa. What is the volume of the gas at conditions of STP?
Answer:
the volume of the gas at conditions of STP = 151.04998 ml
Explanation:
Data given:
V1 = 180 ml
T1 = 35°C or 273.15 + 35 = 308.15 K
P1 = 95.9 KPa
V2 =?
We know that at STP
P2 = 1 atm or 101.3 KPa
T2 = 273.15 K
At STP the pressure is 1 atm and the temperature is 273.15 K
applying Gas Law:
[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]
putting the values in the equation of Gas Law:
[tex]V_2=\frac{P_1V_1T_2}{T_1P_2}[/tex]
V_2 =[tex]\frac{95.9\times180\times273.15}{308.15\times101.3}[/tex]
V2 = 151.04998
therefore, V2 = 151.04998 ml
Answer:
151 mL is the correct answer to the given question .
Explanation:
We know that
[tex]PV =n RT[/tex]
Where P =pressure ,V=volume and T=Temperature
Given
P=95.9 kPa.
V=[tex]180 * 10 ^{-3}[/tex]
R=25/3
T=273 + 35 =308k
Putting these value into the equation we get
[tex]95.9\ * 180\ *\ 10^{-3} \ =\ n * \frac{25}{3} * 308[/tex]
n=[tex]6.72 * 10^{-3}[/tex]
Now using the equation
[tex]n= \ \frac{V}{22.4}[/tex]
[tex]6.72 * 10^{-3} =\frac{V}{22.4}\\ V\ =\ 150.6mL[/tex]
This can be written as 151mL
Which of the following aqueous solutions are good buffer systems? . 0.24 M hydrochloric acid + 0.23 M sodium chloride 0.28 M ammonia + 0.35 M ammonium nitrate 0.16 M barium hydroxide + 0.28 M barium bromide 0.15 M nitrous acid + 0.14 M potassium nitrite 0.35 M calcium nitrate + 0.21 M calcium iodide
Answer: 0.28 M ammonia + 0.35 M ammonium nitrate and 0.15 M nitrous acid + 0.14 M potassium nitrite
Explanation:
Buffer solution is the solution which resists the change in the magnitude of the pH when small additions of either acid or base is added.
Acidic Buffer solutions consist of weak acid and its conjugate base usually mixed in relatively equal and large quantities.
Basic Buffer solutions consist of weak base and its conjugate acid usually mixed in relatively equal and large quantities.
Thus 0.28 M ammonia + 0.35 M ammonium nitrate ( weak base + conjugate acid) and 0.15 M nitrous acid + 0.14 M potassium nitrite (weak acid + conjugate base) are good buffer systems
The aqueous solutions that are good buffer systems are:
0.28 M ammonia + 0.35 M ammonium nitrate. 0.15 M nitrous acid + 0.14 M potassium nitrite.We want to determine which of the given solutions would make a good buffer.
What is a buffer?A buffer is a solution used to resist abrupt changes in pH when an acid or a base is added.
What kinds of buffers exist?Acidic buffer: formed by a weak acid and its conjugate base.Basic buffer: formed by a weak base and its conjugate acid.Which of the following aqueous solutions are good buffer systems?
0.24 M hydrochloric acid + 0.23 M sodium chloride. No, since HCl is a strong acid.0.28 M ammonia + 0.35 M ammonium nitrate. Yes, it would be a good basic buffer.0.16 M barium hydroxide + 0.28 M barium bromide. No, since Ba(OH)₂ is a strong base. 0.15 M nitrous acid + 0.14 M potassium nitrite. Yes, it would be a good acidic buffer.0.35 M calcium nitrate + 0.21 M calcium iodide. No, since no acids nor bases are present.The aqueous solutions that are good buffer systems are:
0.28 M ammonia + 0.35 M ammonium nitrate. 0.15 M nitrous acid + 0.14 M potassium nitrite.Learn more about buffers here: brainly.com/question/24188850
1 Ammonia, NH3, reacts with incredibly strong bases to produce the amide ion, NH2 -. Ammonia can also react with acids to produce the ammonium ion, NH4 +. (a) Which species (amide ion, ammonia, or ammonium ion) has the largest H ¬ N ¬ H bond angle? (b) Which species has the smallest H¬N¬H bond angle?
Answer:
a) ammonium ion
b) amide ion
Explanation:
The order of decreasing bond angles of the three nitrogen species; ammonium ion, ammonia and amide ion is NH4+ >NH3> NH2-. Next we need to rationalize this order of decreasing bond angles from the valence shell electron pair repulsion (VSEPR) theory perspective.
First we must realize that all three nitrogen species contain a central sp3 hybridized carbon atom. This means that a tetrahedral geometry is ideally expected. Recall that the presence of lone pairs distorts molecular structures from the expected geometry based on VSEPR theory.
The amide ion contains two lone pairs of electrons. Remember that the presence of lone pairs causes greater repulsion than bond pairs on the outermost shell of the central atom. Hence, the amide ion has the least H-N-H bond angle of about 105°.
The ammonia molecule contains one lone pair, the repulsion caused by one lone pair is definitely bless than that caused by two lone pairs of electrons hence the bond angle of the H-N-H bond in ammonia is 107°.
The ammonium ion contains four bond pairs and no lone pair of electrons on the outermost nitrogen atom. Hence we expect a perfect tetrahedron with bond angle of 109°.
Ammonia will decompose into nitrogen and hydrogen at high temperature. An industrial chemist studying this reaction fills a tank with of ammonia gas, and when the mixture has come to equilibrium measures the amount of nitrogen gas to be 13. mol. Calculate the concentration equilibrium constant for the decomposition of ammonia at the final temperature of the mixture.
Complete Question
The complete question is shown on the first uploaded image
Answer:
The concentration equilibrium constant is [tex]K_c = 14.39[/tex]
Explanation:
The chemical equation for this decomposition of ammonia is
[tex]2 NH_3[/tex] ↔ [tex]N_2 + 3 H_2[/tex]
The initial concentration of ammonia is mathematically represented a
[tex][NH_3] = \frac{n_1}{V_1} = \frac{29}{75}[/tex]
[tex][NH_3] = 0.387 \ M[/tex]
The initial concentration of nitrogen gas is mathematically represented a
[tex][N_2] = \frac{n_2}{V_2}[/tex]
[tex][N_2] = 0.173 \ M[/tex]
So looking at the equation
Initially (Before reaction)
[tex]NH_3 = 0.387 \ M[/tex]
[tex]N_2 = 0 \ M[/tex]
[tex]H_2 = 0 \ M[/tex]
During reaction(this is gotten from the reaction equation )
[tex]NH_3 = -2 x[/tex](this implies that it losses two moles of concentration )
[tex]N_2 = + x[/tex] (this implies that it gains 1 moles)
[tex]H_2 = +3 x[/tex](this implies that it gains 3 moles)
Note : x denotes concentration
At equilibrium
[tex]NH_3 = 0.387 -2x[/tex]
[tex]N_2 = x[/tex]
[tex]H_2 = 3 x[/tex]
Now since
[tex][NH_3] = 0.387 \ M[/tex]
[tex]x= 0.387 \ M[/tex]
[tex]H_2 = 3 * 0.173[/tex]
[tex]H_2 = 0.519 \ M[/tex]
[tex]NH_3 = 0.387 -2(0.173)[/tex]
[tex]NH_3 = 0.041 \ M[/tex]
Now the equilibrium constant is
[tex]K_c = \frac{[N_2][H_2]^3}{[NH_3]^2}[/tex]
substituting values
[tex]K_c = \frac{(0.173) (0.519)^3}{(0.041)^2}[/tex]
[tex]K_c = 14.39[/tex]
The cryosphere is part of which sphere of the Earth system?
atmosphere
biosphere
geosphere
hydrosphere
Answer:
Ice (frozen water) is part of the hydrosphere, but it's given its own name, the cryosphere.
The cryosphere is part of the hydrosphere of the Earth system. The correct option is D.
What is the cryosphere?The cryosphere contains all the frozen parts of the earth. The term is made up of the Greek word “krios” which means cold. All the frozen water of the oceans and snow comes under the cryosphere.
The atmosphere contains all spheres, it is an envelope of gases. The geosphere is the land part of the earth, and the biosphere is the part where the living part is present.
The cryosphere is h habitat of many living creatures, and the climate of the earth is highly dependent on this sphere. The warmth of the earth is increasing and the cryosphere part is decreasing day by day, which is having problems for many animals.
Thus, the correct option is D, hydrosphere.
To learn more about the cryosphere, refer to the link:
https://brainly.com/question/16912577
#SPJ6
Which table represents a relation that is not function?
Please
Answer:
1
Explanation:
Any relation with a repeated input value is not a function.
Table 1 has the input value 2 listed twice, so does not represent a function.
If 25.8 mL of an AgNO3 solution is needed to precipitate all Cl- ions in a 1570 mg of KCl (forming AgCl), what is the molarity of the AgNO3nsolution?
Answer:
M=0.816M
Explanation:
Hello,
In this case, we should consider the following reaction:
[tex]AgNO_3+KCl\rightarrow KNO_3+AgCl[/tex]
Thus, by knowing the 1:1 molar ratio of silver nitrate and potassium chloride, we can easily compute the moles of silver nitrate precipitating the 1570 mg of potassium chloride considering its molar mass of 74.5513 g/mol:
[tex]n_{AgNO_3}=1570mgKCl*\frac{1gKCl}{1000mgKCl} *\frac{1molKCl}{74.5513gKCl}*\frac{1molAgNO_3}{1molKCl} \\\\n_{AgNO_3}=0.021molAgNO_3[/tex]
Then, by using the volume of silver nitrate in liters (0.0258 L), we can directly compute the molarity:
[tex]M=\frac{0.021molAgNO_3}{0.0258L}\\ \\M=0.816M[/tex]
Regards.
When nitrogen dioxide (NO2) gas from car exhaust combines with water in the air, it forms nitrogen oxide and nitric acid (HNO3), which causes acid rain, and nitrogen oxide. Balanced eqjation:
(NO); 3NO2(g) + H20(l) --> 2HNO3(aq) + NO(g).
A) How many molecules of NO2 are needed to react with 0.250 mol of H2O?
B) How many grams of HNO3 are produced when 60.0 g of NO2 completly reacts?
C) How many grams of HNO3 can be produced if 225 g of NO2 is mixed with 55.2 g of H2O?
Answer:
A. 0.75 moles NO2 are required
B. 82.2 gnof HNO3 are produced
C. 205.3 g of HNO3 are produced
Explanation:
Check attachment below for explanation and calculations
A thermometer is placed in water in order to measure the water’s temperature. What would cause the liquid in the thermometer to rise? The molecules in the water move closer together. The molecules in the thermometer’s liquid spread apart. The kinetic energy of the water molecules decreases. The kinetic energy of the thermometer’s liquid molecules decreases.
Answer:
The molecules in the thermometer’s liquid spread apart
Explanation:
The molecules in the thermometer’s liquid spread apart.
What is thermometer?A thermometer is a device that measures temperature or a temperature gradient.
What causes the liquid in the thermometer to rise?The liquid (water) in thermometer exhibits convex meniscus, as a result of this meniscus, the water molecules in the thermometer will spread apart when temperature is measured.
Learn more about thermometer here: https://brainly.com/question/21720093
Change the bond between the two carbon atoms in each molecule to a double or triple bond as needed to complete the structure. If the bond should remain a single bond, then you do not need to do anything to the bond. Do not change any other bonds in the molecules.
Answer:
Your question is complex, because I think you wrote it wrong.
Although in front of this what I can help you is that the carbons are associated between a single, double or triple union.
This depends on whether they are attached to more or less carbons or hydrogens, the carbons have the possibility of joining 4 radicals, both other carbons and hydrogens.
Simple junctions talks about compound organisms called ALKANS.
The double unions, in organic these compounds are called as ALQUENOS.
And as for the tertiary unions, the organic chemistry names them as ALQUINOS.
These compounds that we write, a simple union, the less energy, the less this union, that is why the triple bond is the one that contains the most energy when breaking or destroying it in a reaction.
Explanation:
In a chemical compound the change of these unions if we modified them we would generate changes even in the classifications naming them as well as different compounds and not only that until they change their properties
Answer:
Answer:
The first should be left asis because carbon already has 4 bonds/8 electrons
The second needs to have a double bond to give carbon 4 bonds/8 electrons
The third must have a triple bong between the carbons to give them both 4 bonds/8 electrons
Explanation:
Make sure Hydrogen only has 1 bond/2 electrons at all times. Carbon needs a total of 4 bonds/8 electrons
Classify the following as Arrhenius, Bronsted-Lowry, or Lewis acid-base reactions. A reaction may fit all, two, one, or none of the categories:I. Cu2+ + 4 Cl− CuCl42−II. Al(OH)3 + 3HNO3 Al3+ + 3H2O + 3 NO3−III. N2 + 3 H2 2NH3IV. CN− + H2O HCN + OH
Answer:
I. Lewis acid-base reaction
II. Arrhenius, Brønsted-Lowry, and Lewis' acid-base reaction
III. Brønsted-Lowry and Lewis'acid-base reaction
IV. Lewis acid-base reaction
Explanation:
According to Arrhenius, an acid is a substance that dissolves in water to produce H+ ions, and a base is a substance that dissolves in water to produce hydroxide (OH−) ions.
In the reaction below, AH is an avid, BOH is a base reacting together to form a salt(A-B+) and water only.
AH + BOH ---> A-B+ + H2O
According to Brønsted-Lowry definition, an acid is any substance that can donate a proton, and a base is any substance that can accept a proton.
In the reaction below, AH is an acid while B is a base, reacting together to form an acid-base conjugate pair.
AH + B <-----> BH+ + A-
According to Lewis' definition, an acid is a species that accepts an electron pair while a base donates an electron pair resulting in a coordinate covalently bonded compound, also known as an adduct. In the reaction below, A+ is an acid, B- is a base, reacting together to form product A-B.
A+ + B- ------> A-B
Considering the above definitions;
I. Cu²+ + 4 Cl− ---> CuCl4²− is a Lewis acid-base reaction because it involves electron sharing only.
II. Al(OH)3 + 3HNO3 ---> Al3+ + 3H2O + 3 NO3− is an Arrhenius, Brønsted-Lowry, and a Lewis acid-base reaction because it involves protons, electrons and hydroxide ions.
III. N2 + 3 H2 ---> 2NH3 is a Lewis acid-base reaction because it involves sharing of electrons only.
IV. CN− + H2O ---> HCN + OH is both a Lewis and Brønsted-Lowry acid-base reaction because both protons and electrons sharing is involved.
In a Bronsted-Lowry acid-base reaction reaction, an acid donates protons which is accepted by the base.
The following are useful definitions of acids and bases;
An Arrhenius acid produces hydrogen ion as its only positive ion in solution while an Arrhenius base produces hydroxide ion as its only negative ion in solution.A Bronsted-Lowry acid donates hydrogen ions while a Bronsted-Lowry base accepts hydrogen ionsA Lewis acid accepts lone pairs of electrons while a Lewis base donates lone pairs of electrons.Based on these, we can now classify the reactions accordingly;
Cu^2+ + 4Cl− ------>[CuCl4[^2− Lewis acid-base reaction Al(OH)3 + 3HNO3 -----> Al^3+ + 3H2O + 3NO3^− Arrhenius acid-base reactionN2 + 3H2 ----> 2NH3 NoneCN− + H2O ------> HCN + OH^- Bronsted-Lowry acid-base reactionLearn more: https://brainly.com/question/9352088
Given a K value of 0.43 for the following aqueous equilibrium, suppose sample Z is placed into water such that it’s original concentration is 0.033 M. Assume there was zero initial concentration of either A(aq) or B(aq). Once equilibrium has occurred, what will be the equilibrium concentration of Z?
2A(aq) + B(aq) <> 2Z (aq)
Answer:
[Z] = 0.00248M
Explanation:
Based in the reaction:
2A(aq) + B(aq) ⇄ 2Z (aq)
K of the reaction is defined as:
K = [Z]² / [A]²[B] = 0.43
If you add, in the first, just 0.033M of Z, concentrations in equilibrium are:
[Z] = 0.033M - 2X
[A] = 2X
[B] = X
Replacing in K equation:
0.43 = [0.033M - 2X]² / [2X]² [X]
0.43 = [0.033M - 2X]² / [2X]² [X]
0.43 = 4X² -0.132X + 0.001089 / 4X³
1.72X³ - 4X² + 0.132X - 0.001089 = 0
Solving for X:
X = 0.01526M
Replacing, concentration in equilibrium of Z is:
[Z] = 0.033M - 2*0.01526M = 0.00248M
Answer:
Less than 0.033 M
Explanation:
Hello,
In this case, given the equilibrium:
[tex]2A(aq) + B(aq) \rightleftharpoons 2Z (aq)[/tex]
Thus, the law of mass action is:
[tex]K=\frac{[Z]^2}{[A]^2[B]}[/tex]
Nevertheless, given the initial concentration of Z that is 0.033 M, we should invert the equilibrium since the reaction will move leftwards:
[tex]\frac{1}{K} =\frac{[A]^2[B]}{[Z]^2}=2.33[/tex]
Know, by introducing the change due to the reaction extent, we can write:
[tex]2.33=\frac{(2x)^2*x}{(0.033M-2x)^2}[/tex]
Which has the following solution:
[tex]x_1=2.29M\\x_2=0.0181M\\x_3= 0.0153M[/tex]
But the correct solution is [tex]x=0.0153M[/tex] since the other solutions make the equilibrium concentration of Z negative which is not possible. In such a way, its concentration at equilibrium is:
[tex][Z]_{eq}=0.033M-2*0.0153M=0.0024M[/tex]
Which is of course less than 0.033 M since the addition of a product shift the reaction leftwards in order to reestablish equilibrium (Le Chatelier's principle).
Regards.