4. Which form of asexual reproduction describes the process of a cell dividing to
produce a copy?

The question is incomplete, the complete question is; Describe the preparation of 2.00 L of 0.108 M BaCl2 from BaCl2.2H2O

Answer:

See explanation

Explanation:

First we must know the molar mass of the compound = 244.3 g/mol

Now we must calculate the number of moles of BaCl2.2H2O in the solution.

number of moles = concentration * volume = 0.108 M * 2.00 L = 0.216 moles

Now the mass of solid that we need to take can be obtained from;

number of moles = mass/molar mass

mass = number of moles * molar mass

mass = 0.216 moles * 244.3 g/mol

Mass = 52.8 g

Hence, we must weigh 52.8 g of BaCl2.2H2O accurately in a balance and dissolve it in 2 L of water to give 0.108 M solution of BaCl2.2H2O.

Answer:

Cesium (Cs)

Explanation:

This eliment has an ionization energy of 3,8939

Answer:

b. Gas particles are far apart so they are easy to compress together.

Explanation:

Answer:

Indicates the writer's stance on the main idea of a paragraph. The controlling idea appears in the paragraph's topic sentence. ... The final sentence of a paragraph that summarizes the topic sentence using different words. Words and phrases that show how the ideas in sentences and paragraphs are related.

Explanation:

HOPE THIS HELP

PICK ME AS THE BRAINLIEST

Answer:

he last paragraph relates to the main topic because the main topic is about cells and the last paragraph is saying how scientist are still discovering cells but the author says that the new cells are not listed in the article

Explanation:

i had a bad day i hope you have a good one -me    ;

Answer: here lol

Explanation:

hope it helps just read very carefully

Answer:

Mass = 141.6 g

Explanation:

Given data:

Mass of Kr in gram =  ?

Volume in L = 9.59 L

Temperature = 46.0°C

Pressure = 4.62 atm

Solution:

The given problem will be solve by using general gas equation,

PV = nRT

P= Pressure

V = volume

n = number of moles

R = general gas constant = 0.0821 atm.L/ mol.K  

T = temperature in kelvin

Now we will convert the temperature.

46.0+273 = 319 K

4.62 atm × 9.59 L = n× 0.0821 atm.L/ mol.K  ×319 K

44.3 atm.L = n×26.19 atm.L/ mol

n = 44.3 atm.L / 26.19 atm.L/ mol

n = 1.69 mol

Mass in gram:

Mass = number of moles × molar mass

Mass = 1.69 mol × 83.79 g/mol

Mass = 141.6 g

Answer: Electrophilic addition reaction

Explanation:

Alkenes are compounds which have at least one double bond between the carbon atoms in the molecule. This is an indication of a shortage of hydrogen atoms. The compound is said to be unsaturated. As an unsaturated compound alkene undergoes the following reaction:

-- Combustion reaction

-- Hydrogenation reaction

-- Addition reaction.

The addition reaction of alkenes occur due to the presence of pi electrons in which an electrophile attacks the carbon-carbon double bond to form the addition products. An electrophile is a molecule that has the affinity to react with other molecules containing a donatable pair of electrons.

A typical example of reaction between alkene and acid is in the decolourisation of acidified potassium tetraoxomanganate(VII) with ethene. The oxygen supplied to the reaction breaks the double bond to yield ethane 1,2 diol ( an alcohol).

The reaction of an alkene with the acid has been performed with the carbocation intermediate formation, followed by the nucleophilic substitution reaction.

The alkenes have been the hydrocarbons with the presence of one double bond in the structure. The double bond has been consisted of the pi electrons.

The alkene has been bonded with the pi-electron, thus in the chemical reaction the pi bond-breaking results in the partial negative and positive charge to the carbon atoms. The negative OH group has been the nucleophile that is attracted by the negatively charged carbon atom, and the bond formation results in the alcohol.

The reaction for an alkene with acid has been given in the image attached.

Thus, the reaction of an alkene with the acid has been performed with the carbocation intermediate formation, followed by the nucleophilic substitution reaction.

For more information about the reaction mechanism, refer to the link:

https://brainly.com/question/24924720

The intermolecular forces or the strength of C is more than that of B.

What are intermolecular forces?

Here, we can see that C has dipole-dipole interaction while B has none.

Therefore, it states that the intermolecular forces present in C are much more than that in B.

To learn more about intermolecular forces, visit: https://brainly.com/question/9007693

#SPJ9

Explanation:

There are ten d electrons in the outermost d subshell for Zn2+.

Answer:

69.09 g

Explanation:

First we calculate the mass of the sample of concentrated H₂SO₄, using the given volume and density:

There are 70.288 grams of solution, of which 98.3% is H₂SO₄. Thus the H₂SO₄ mass is:

Taking into account the definition of density and percentage by mass, the mass of H₂SO₄ in a 38.2 cm³ sample of concentrated sulfuric acid is 69.09 grams.

But first you must know the definition of density. Density is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space.

In other words, density is a quantity that allows us to measure the amount of mass in a certain volume of a substance. Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:

[tex]density=\frac{mass}{volume}[/tex]

In this case, you know that:

Density= 1.84 [tex]\frac{g}{cm^{3} }[/tex]

Volume= 38.2 cm³

Replacing in the definition of density:

[tex]1.84 \frac{g}{cm^{3} }=\frac{mass}{38.2 cm^{3} }[/tex]

Solving:

mass= 1.84 [tex]\frac{g}{cm^{3} }[/tex]×38.2 cm³

mass= 70.288 g

So, the mass of the solution is 70.288 grams.

The percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.

In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.

The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:

[tex]percentage by mass=\frac{mass of solute}{mass of solution}x100[/tex]

In this case, you know:

percentage by mass=98.3%

mass of solute= ?

mass of solution= 70.288 grams

Replacing in the definition of percentage by mass:

[tex]98.3=\frac{mass of solute}{70.288 grams}x100[/tex]

Solving:

[tex]\frac{98.3}{100} =\frac{mass of solute}{70.288 grams}[/tex]

[tex]0.983=\frac{mass of solute}{70.288 grams}[/tex]

0.983× 70.288 grams= mass of solute

69.09 grams= mass of solute

The mass of H₂SO₄ in a 38.2 cm³ sample of concentrated sulfuric acid is 69.09 grams.

Learn more about

density:

brainly.com/question/952755?referrer=searchResults

brainly.com/question/1462554?referrer=searchResults

percentage by mass:

brainly.com/question/18646836?referrer=searchResults

The answer is 1) Plant roots take in water through their roots.

Explanation:The biosphere is made up of all the lifeforms present on the Earth. The hydrosphere is constituted of all the water bodies and sources of water.

When a certain lifeforms from the biosphere reaches out to another sphere, preferably to fetch what if requires to survive, it is said that there is an interaction between two spheres of the larger environment.

These spheres are all interdependent on each other. (i did this before)

Answer:

Plant roots take in water through their roots.

Explanation:

EDGE 2021

Answer:

The equation is balanced

Explanation:

There are 3Mg,2N,12H,6O and on the other side its the same amount on the other side

Answer:

B) tetrahedral

Explanation:

From the information:

The given complex is [tex]\Big [Zn (NH_3)_2Cl_2 \Big ]^{2+}[/tex]. In this complex, the number of ligands attached to the central metal atom Zn is 4. This, in turn, affects the coordination number of the complex to be 4. For a coordination number with 4, the likely geometry can either be tetrahedral or square planar, and cis-trans isomerism only occurs in a square planar geometry.

But, from the question, we are informed that the complex does not exhibit cis-trans isomerism, therefore the complex must be tetrahedral.

Answer:

D - Flash Disk

Explanation:

Answer:

a. BH₃

Explanation:

According to the octet rules, atoms reach stability when are surrounded by eight electrons in their valence shell when they combine to form a chemical compound.

From the options, the only compound in which the central atom does not meet the octet rules is BH₃. The central atom is boron (B), which has 3 electrons in its valence shell. When B is combined with hydrogen (H), 3 electrons from the 3 atoms of H are added. The total amount of electrons is 6, fewer than 8 electrons needed to meet the rule.

The compound which is showing exception to the octet rules is BH₃.

According to the octet rule in the outermost valence shell of any compound, eight electrons should present.

Among the given compounds only BH₃ will not satisfy the octet rule, as in the outermost shell of boron atom 3 electron are present following the electronic configuration 1s²,2s²2p¹ because its atomic number is 5. Now this boron atom will form bond with 3 hydrogen atoms and these hydrogen atoms will share 3 electrons to boron atom.

So, total electrons in the outer most shell of BH₃ compound is 3+3=6.

Hence, BH₃ is an exception of octet rule.

To know more about octet rule, visit the below link:

https://brainly.com/question/7620705

Answer:

the answer should be A ! hope this helps :)

Explanation:

Answer:

1.76 x 10²²molecucles

Explanation:

Given parameters:

Mass of the sugar  C₁₂H₂₂O₁₁  = 10g

Unknown:

Number of molecules  = ?

Solution:

The number of molecules can be determined if we find the number of moles first.

  Number of moles  = [tex]\frac{mass}{molar mass}[/tex]  

  Molar mass of C₁₂H₂₂O₁₁ = 12(12) + 22(1) + 11(16) = 342g/mol

 Number of moles  = [tex]\frac{10}{342}[/tex]   = 0.029mole

1 mole of C₁₂H₂₂O₁₁ will contain 6.02 x 10²³

  0.029 mole of C₁₂H₂₂O₁₁ will be made up of 0.029 x 6.02 x 10²³

                         = 1.76 x 10²²molecucles

The concentration in ppm = 125,000 ppm

The concentration of a substance can be expressed in several quantities such as moles, percent (%) weight / volume,), molarity, molality, parts per million (ppm) or mole fraction. The concentration shows the amount of solute in a unit of the amount of solvent.

ppm or parts per million (ppm) :

For water solvent = 1 ppm ⇒ 1 mg/L(1 kg=1 L,ρ water=1 kg/L)

In percent mass = 1 ppm ⇒ 1 mg/ 1 kg

Solution contains 0.25 kg of lead in 2 kg of water :

Solvent = water = 2 kg = 2 L

Solute= lead=0.25 kg=250000 mg

So the concentration in ppm :

[tex]\tt ppm=\dfrac{250,000~mg}{2~L}=\boxed{\bold{125,000~ppm}}[/tex]

Answer:

The concentration in ppm = 125,000 ppm

Explanation:

that is why chemistry is chemistry.

Glycogenolysis and Gluconeogenesis occur in the liver due to the action of Cortisol.

It is the process of storing excess glucose for body which can be used at later time. the glycogen stored by the liver is broken down to glucose and dispersed in the body.

Cortisol helps to decrease insulin and increase glucagon. glucagon is type of peptide hormone secreted by pancreatic cells to increase the process of gycogenolysis or gluconeogenis.   it is the primary stress harmone which increases glucose(sugar) in blood.

Gluconeogesis ia that process which tansform non carbohydrate substrate like amino acid ,gycerol into glucose.

Thus, Glycogenolysis and Gluconeogenesis occur in the liver due to the action of Cortisol.

To learn more about Glycogenolysis here

https://brainly.com/question/27587913

#SPJ1

Answer:

6

Explanation:

The coordination number of a particular crystal structure arrangement is defined as the number of nearest neighbor atoms or ions surrounding an atom or ion.

We must note that in salts of the type MX, the coordination number of each ion must be equal. The structure of LiCl is built by placing each unit cell next to another such that ions residing in the corner, edge or face sites are shared between adjacent unit cells. The LiCl is in FCC arrangement.

Hence in LiCl, each Li+ ion is surrounded by 6 chloride ions.

Answer:

The bond in a homonuclear diatomic molecule is non-polar due to the electronegativity difference of zero

Explanation:

Answer:

180

Explanation:

just multiply and round to whole number

Answer:

They work by increasing activity in the brain, particularly in areas that help control attention and behaviour. Methylphenidate is used to treat children with attention deficit hyperactivity disorder (ADHD). It helps with hyperactivity and impulsive behaviour, and allows them to concentrate better.

Explanation:

The given question is incomplete. The complete question is:

Butane [tex](C_4H_{10}(g)[/tex], Hf = –125.6 kJ/mol) reacts with oxygen to produce carbon dioxide ([tex]CO_2[/tex] , Hf = –393.5 kJ/mol ) and water [tex](H_2O[/tex], Hf = –241.82 kJ/mol) according to the equation below. What is the enthalpy of combustion (per mole) of [tex]C_4H_{10} (g)[/tex]?

Answer: -2657.5 kJ

Explanation:

The balanced chemical reaction is,

[tex]C_4H_{10}(g)+\frac{13}{2}O_2(g)\rightarrow 4CO_2(g)+5H_2O(g)[/tex]

The expression for enthalpy change is,

[tex]\Delta H=\sum [n\times \Delta H_f(product)]-\sum [n\times \Delta H_f(reactant)][/tex]

[tex]\Delta H=[(n_{CO_2}\times \Delta H_{CO_2})+(n_{H_2O}\times \Delta H_{H_2O})]-[(n_{O_2}\times \Delta H_{O_2})+(n_{C_4H_{10}}\times \Delta H_{C_4H_{10})][/tex]

where,

n = number of moles

[tex]\Delta H_{O_2}=0[/tex] (as heat of formation of substances in their standard state is zero

Now put all the given values in this expression, we get

[tex]\Delta H=[(4\times -393.5)+(5\times -241.82)]-[(\frac{13}{2}\times 0)+(1\times -125.6)][/tex]

[tex]Delta H=-2657.5kJ[/tex]

Therefore, the enthalpy of combustion per mole of butane is -2657.5 kJ

Answer:

All of the above

Explanation:

Answer:

A. When a piece of copper is heated, it combines with oxygen to form copper oxide. The chemical reaction for the same is as follows:

              2 Cu (s) + O2(g) => 2CuO

B. The mass of the piece of copper will remain same and there will be no change in its mass. However, its volume will increase, so its density will decrease.

C. This is so because heating copper in its elemental form is a physical change and there is no change in mass during a physical change. Hence, the mass of copper remain same.

Answer:

It would produce ethane (CH₃CH₃)

Explanation:

Ethylmagnesium bromide (CH₃CH₂MgBr) is a Grignard's reagent.

It is a highly reactive substance, and as any alkylmagnesium bromide

(R-CH₂MgBr) it reacts with water to produce an alkane (R-CH₃). R stands for any carbon structure bonded to that functional group.

Answer:

n = 3.77 mol

Explanation:

Given data:

Number of moles = ?

Volume of gas = 10.0 L

Pressure = 8.91 atm

Temperature = 287.4 K

Solution:

Formula:

PV = nRT

R = general gas constant = 0.0821 atm.L/ mol.K

by putting values,

8.91 atm × 10.0 L = n × 0.0821 atm.L/ mol.K ×287.4 K

89.1 atm.L = n × 23.60 atm.L/ mol

n =89.1 atm.L / 23.60 atm.L/ mol

n = 3.77 mol

Answer:

b) Glucitol

Explanation:

The glucose loses the carbonyl group and its transformed to CH2OH