Answer: A) Team should not have to make personal sacrifices for the success of the team.
Explanation:
A 6.47 micro-coloumb particle moves through a region of space where an electric field of magnitude 1300 N/C points in the positive x direction, and a magnetic field of magnitude 1.33 T points in the positive z direction. If the net force acting on the particle is 6.27E^-3 N in the positive x direction>
Required:
Calculate the magnitude of the particle's velocity. Assume the particle's velocity is in the xy plane.
Answer:
v = 248.8 m/s
Explanation:
Given that,
Charge, q = [tex]6.47\ \mu C[/tex]
Electric field, E = 1300 N/C
Magnetic field, B =1.33 T
The force acting on the particle, [tex]F=6.27\times 10^{-3}\ N[/tex]
We need to find the magnitude of the particle's velocity. The net force on the particle is given by :
[tex]F=qE+qvB\\\\6.27\times 10^{-3}=6.47\times 10^{-6}\times 1300+6.47\times 10^{-6}\times 1.33v\\\\6.27\times 10^{-3}-6.47\times 10^{-6}\times 1300=6.47\times 10^{-6}\times 1.33v\\\\-0.002141=6.47\times 10^{-6}\times 1.33v\\\\v=\dfrac{0.002141}{6.47\times 10^{-6}\times 1.33}\\\\v=248.8\ m/s[/tex]
So, the magnitude of the particle's velocity is 248.8 m/s.
A spring has a spring constant of 450 N/m. How much must this spring be stretched to store 49 J of potential energy?
Answer:
W = 1/2 K x^2
x^2 = 2 * W / K = 2 * 49 J / (N/m) = .218 / m^2
x = .467 m
A bullet of mass 4.00 g is fired horizontally into a wooden block of mass 1.30 kg resting on a horizontal surface. The coefficient of kinetic friction between block and surface is 0.170. The bullet remains embedded in the block, which is observed to slide a distance 0.240 m along the surface before stopping. Part A What was the initial speed of the bullet
Answer:
[tex]291.67\ \text{m/s}[/tex]
Explanation:
[tex]m_1[/tex] = Mass of bullet = 4 g
[tex]m_2[/tex] = Mass of block = 1.3 kg
[tex]\mu[/tex] = Coefficient of friction = 0.17
[tex]s[/tex] = Displacement of block = 0.24 m
[tex]v_1[/tex] = Velocity of bullet
[tex]v[/tex] = Velocity of combined mass
[tex]g[/tex] = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
The energy balance of the system is given by
[tex]\dfrac{1}{2}(m_1+m_2)v^2=\mu(m_1+m_2)gs\\\Rightarrow v=\sqrt{2\mu gs}[/tex]
As the momentum is conserved in the system we have
[tex]m_1v_1=(m_1+m_2)v\\\Rightarrow m_1v_1=(m_1+m_2)\sqrt{2\mu gs}\\\Rightarrow v_1=\dfrac{(m_1+m_2)\sqrt{2\mu gs}}{m_1}\\\Rightarrow v_1=\dfrac{(4\times 10^{-3}+1.3)\times \sqrt{2\times 0.17\times 9.81\times 0.24}}{4\times 10^{-3}}\\\Rightarrow v_1=291.67\ \text{m/s}[/tex]
The initial speed of the bullet is [tex]291.67\ \text{m/s}[/tex].
Hand pushes on a table with a force of 35n forward.reaction force
Answer:
como ías
Explanation:
Why is it harder to breathe on a
mountain?
A. The air pressure is so high the lungs can't expand.
B. The air is denser and oxygen can't flow easily into the
lungs.
C. The denser oxygen molecules sink below the
surrounding air.
D. The air is less dense so there are fewer oxygen
molecules.
Which particle needs to be added to this equation to show that the total numbers of neutrons and protons are not changed by the reaction? MARKLING BRAINLIEST 70 points must be correct!
Answer:
C.
Explanation:
Answer:A
Explanation:ap3x
Fill in the blanks using the following words: Solid, Liquids, Gasses, More, Less, Gas, Fluids, Higher, Lower, Sun, Radiation, Conductors
● Radiation transfers heat best through _________ because there is _______ space between the particles.
● Conduction transfers heat best through _______ because there is space between the particles.
● Convection transfers heat best through _______ which includes _______ and ______.
● Heat always moves from _________ temperature to _________ temperature.
● Heat from ______ travels to earth by ___________.
● Solids that transfer heat well ate known as _____________.
Answer:
Blank 1: Gasses
Blank 2: More
Blank 3: Solids
Blank 4: Fluids
Blank 5: Liquid
Blank 6: Gas
Blank 7: Higher
Blank 8: Lower
Blank 9: Sun
Blank 10: Radiation
Blank 11: Conductors
P.S. order of answers does not matter between Blank 5 and 6.
What is the importance of using locally available resources in creating art?
Answer:
please give me brainlist and follow
Explanation:
Using locally available resources for art help in the preservation of environment. A significant and practical aspects of art is material significance. The items used by artists while making an art piece affects both the form and the material. Every material delivers something special in the creative process.
Help please. Question about a potential energy.
When jeremiah stands in a swimming pool and looks at hid feet, his legs appear to be bent. Which is the term for this phenomenon?
A. Diffraction
B. Dispersion
C. Reflection
D. Refraction
Which energy source can be found on the electromagnetic spectrum? A) sound energy B) chemical energy UV light energy D mechanical energy
What is the unit of measurement of mass and weight?
Answer:
kilogram
In the International System of Units (SI), the kilogram is the basic unit of mass, and the newton is the basic unit of force. The non-SI kilogram-force is also a unit of force typically used in the measure of weight.
The moment of inertia of the club head is a design consideration for a driver in golf. A larger moment of inertia about the vertical axis parallel to the club face provides more resistance to twisting of the club face for off-center hits. The mass of one club head is 200 g and its moment of inertia is 5000 g cm2 . What is the radius of gyration of this club head
Answer:
Explanation:
Moment of inertia I = M k² , where M is mass and k is radius of gyration .
Putting the given values in the equation
5000 = 200 x k²
k² = 25
k = 5 cm .
Radius of gyration is 5 cm .
A 20 ft ladder leans against a wall. The bottom of the ladder is 3 ft from the wall at time t=0 and slides away from the wall at a rate of 2ft/sec. Find the velocity of the top of the ladder at time t=1.
Answer: 0.516 ft/s
Explanation:
Given
Length of ladder L=20 ft
The speed at which the ladder moving away is v=2 ft/s
after 1 sec, the ladder is 5 ft away from the wall
So, the other end of the ladder is at
[tex]\Rightarrow y=\sqrt{20^2-5^2}=19.36\ ft[/tex]
Also, at any instant t
[tex]\Rightarrow l^2=x^2+y^2[/tex]
differentiate w.r.t.
[tex]\Rightarrow 0=2xv+2yv_y\\\\\Rightarrow v_y=-\dfrac{x}{y}\times v\\\\\Rightarrow v_y=-\dfrac{5}{19.36}\times 2=0.516\ ft/s[/tex]
PLEASE HELP!! :)
Which of the following options would increase the electric force the most?
a. tripling the charge on one particle
b. changing the sign of one of the particles.
c. doubling the charge on one particle
d. doubling the charge on both particles
I beg you plz help me asap!!!
Q. How does new planet change our understanding about the universe?
Answer:
a.
Explanation:
there would be a new planet is our solar system which could cause different gravitation pull on all the planets also there could be possible be new life form or other valuable metals that haven't been discovered on this planet. hope this helps somewhat
16. Two electric bulbs marked 100W 220V and 200W 200V have tungsten
filament of same length. Which of the two bulbs will have thicker
filament?
Answer:
The second bulb will have thicker filament
Explanation:
Given;
First electric bulb: Power, P₁ = 100 W and Voltage, V₁ = 220 V
Second electric bulb: Power, P₂ = 200 W and Voltage, V₂ = 200 V
Resistivity of tungsten, ρ = 4.9 x 10⁻⁸ ohm. m
Resistance of the first bulb:
[tex]P = IV = \frac{V}{R} .V = \frac{V^2}{R} \\\\R = \frac{V^2}{P} \\\\R_1 = \frac{V_1^2}{P_1} = \frac{(220)^2}{100} = 484 \ ohms[/tex]
Resistance of the second bulb:
[tex]R_2 = \frac{V_2^2}{P_2} = \frac{(200)^2}{200} = 200 \ ohms[/tex]
Resistivity of the tungsten filament is given by the following equation;
[tex]\rho = \frac{RA}{L}[/tex]
where;
L is the length of the filament
R is resistance of each filament
A is area of each filament
[tex]A = \pi r^2[/tex]
where;
r is the thickness of each filament
[tex]\rho = \frac{R (\pi r^2)}{L} \\\\\frac{\rho L}{\pi} = Rr^2 \\\\Recall ,\ \frac{\rho L}{\pi} \ is \ constant \ for \ both \ filaments\\\\R_1r_1^2 = R_2r_2^2\\\\(\frac{r_1}{r_2} )^2 = \frac{R_2}{R_1} \\\\\frac{r_1}{r_2} = \sqrt{\frac{R_2}{R_1} } \\\\\frac{r_1}{r_2} = \sqrt{\frac{200}{484} } \\\\\frac{r_1}{r_2} = 0.64\\\\r_1 = 0.64 \ r_2\\\\r_2 = 1.56 \ r_1[/tex]
Therefore, the second bulb will have thicker filament
A mass weighing 24 pounds, attached to the end of a spring, stretches it 4 inches. Initially, the mass is released from rest from a point 4 inches above the equilibrium position. Find the equation of motion. (Use g
Answer:
The equation of motion is [tex]x(t)=-[/tex][tex]\frac{1}{3} cos4\sqrt{6t}[/tex]
Explanation:
Lets calculate
The weight attached to the spring is 24 pounds
Acceleration due to gravity is [tex]32ft/s^2[/tex]
Assume x , is spring stretched length is ,4 inches
Converting the length inches into feet [tex]x=\frac{4}{12} =\frac{1}{3}feet[/tex]
The weight (W=mg) is balanced by restoring force ks at equilibrium position
mg=kx
[tex]W=kx[/tex] ⇒ [tex]k=\frac{W}{x}[/tex]
The spring constant , [tex]k=\frac{24}{1/3}[/tex]
= 72
If the mass is displaced from its equilibrium position by an amount x, then the differential equation is
[tex]m\frac{d^2x}{dt} +kx=0[/tex]
[tex]\frac{3}{4} \frac{d^2x}{dt} +72x=0[/tex]
[tex]\frac{d^2x}{dt} +96x=0[/tex]
Auxiliary equation is, [tex]m^2+96=0[/tex]
[tex]m=\sqrt{-96}[/tex]
=[tex]\frac{+}{} i4\sqrt{6}[/tex]
Thus , the solution is [tex]x(t)=c_1cos4\sqrt{6t}+c_2sin4\sqrt{6t}[/tex]
[tex]x'(t)=-4\sqrt{6c_1} sin4\sqrt{6t}+c_2[/tex] [tex]4\sqrt{6}[/tex] [tex]cos4\sqrt{6t}[/tex]
The mass is released from the rest x'(0) = 0
[tex]=-4\sqrt{6c_1} sin4\sqrt{6(0)}+c_2[/tex] [tex]4\sqrt{6}[/tex] [tex]cos4\sqrt{6(0)}[/tex] =0
[tex]c_2[/tex] [tex]4\sqrt{6} =0[/tex]
[tex]c_2=0[/tex]
Therefore , [tex]x(t)=c_1[/tex] [tex]cos 4\sqrt{6t}[/tex]
Since , the mass is released from the rest from 4 inches
[tex]x(0)= -4[/tex] inches
[tex]c_1 cos 4\sqrt{6(0)} =-\frac{4}{12}[/tex] feet
[tex]c_1=-\frac{1}{3}[/tex] feet
Therefore , the equation of motion is [tex]-\frac{1}{3} cos4\sqrt{6t}[/tex]
If 10 Coulombs flow through a circuit every 2 seconds, what is the current?
A. Not enough info
B. 5 A
C. 10 A
D. 1 A
Answer:
not enought info
Explanation:
tbh I just know it's not 5 10 or 1
Answer:
B. 5 A
Explanation:
10/2= 5
Educere
Two identical copper blocks are connected by a weightless, unstretchable cord through a frictionless pulley at the top of a thin wedge. One edge of the wedge is vertical, and the tip makes an angle of 33. The block that hangs vertically weighs 2.85 kg, and the block on the incline weighs 2.94 kg. If the two blocks do not move, what is magnitude of the force of friction on the second second block
Answer:
13.6 N
Explanation:
Since one side of the wedge is vertical and the wedge makes and angle of 33 with the horizontal, the angle between the weight of the copper block on the incline and the incline is thus 90 - 33 = 57.
Let M be the mass of the block that hangs, m be the mass of the block on the incline and T be the tension in the weightless unstretchable cord.
We assume the motion is downwards in the direction of the hanging block, M.
We now write equations of motion for each block.
So
Mg - T = Ma (1) and T - mgcos57 - F = ma where F is the frictional force on the block on the incline and a is their acceleration.
Now, since both blocks do not move, a = 0.
So, Mg - T = M(0) = 0 and T - mgcos57 - F = m(0) = 0
Mg - T = 0 (3) and T - mgcos57 - F = 0 (4)
From (3), T = Mg
Substituting T into (4), we have
T - mgcos57 - F = 0
Mg - mgcos57 - F = 0
So, Mg - mgcos57 = F
F = Mg - mgcos57
F = (M - mcos57)g
Since g = acceleration due to gravity = 9.8 m/s², and M = 2.94 kg and m = 2.85 kg.
We find F, thus
F = (2.94 kg - 2.85 kgcos57)9.8 m/s²
F = (2.94 kg - 2.85 kg × 0.5446)9.8 m/s²
F = (2.94 kg - 1.552 kg)9.8 m/s²
F = (1.388 kg)9.8 m/s²
F = 13.6024 kgm/s²
F ≅ 13.6 N
1- charging by touch occurs when electrons are transmitted by direct contact.
(Right)
(wrong)
2- Electric charges are preserved, they are not created or destroyed.
(Right)
(wrong)
Answer:
#1 - True (touch) charging when electric conductors actually touch one another.
#2. True - electrical charges are conserved (not destroyed)
Grade 10 My smart Physics people help me with this review question please
Answer:
sorry I am not confident you the answer
Which of the following would NOT be
considered a pollutant?
A. carbon monoxide
B. sulfur dioxide
C. oxygen
D. smoke
Answer:
Answer: Oxygen
Explanation:
Oxygen would not be considered as a pollutant
Answer:
Hey there the answer is C. Oxygen
Explanation:
Oxygen is the chemical element with the symbol O and atomic number 8. It is a member of the chalcogen group in the periodic table, a highly reactive nonmetal, and an oxidizing agent that readily forms oxides with most elements as well as with other compounds. After hydrogen and helium, oxygen is the third-most abundant element in the universe by mass. At standard temperature and pressure, two atoms of the element bind to form dioxygen, a colorless and odorless diatomic gas with the formula O 2. Diatomic oxygen gas constitutes 20.95% of the Earth's atmosphere. Oxygen makes up almost half of the Earth's crust in the form of oxides. Hope this helps! Have a great day!
describe what will happen to our sun in the future
Answer: After fusing helium in its core to carbon, the Sun will begin to collapse again, evolving into a compact white dwarf star after ejecting its outer atmosphere as a planetary nebula. The predicted final mass is 54.1% of the present value, most likely consisting primarily of carbon and oxygen.
Answer: the Sun will begin to collapse
Explanation: "After fusing helium in its core to carbon, the Sun will begin to collapse again, evolving into a compact white dwarf star after ejecting its outer atmosphere as a planetary nebula. The predicted final mass is 54.1% of the present value, most likely consisting primarily of carbon and oxygen."
volcano has both useful and harmful effects give reason
Answer:
harmful effects
1. that will cause air pollution
2. that will destroy our earth
Answer:
useful effects of volcano are :-
it makes soil fertile it provides valuable nutrients for the soilharmful effects of volcano are:-
it makes air polluted it destroy the environment .hope it is helpful to you ☺️
The photosphere refers to the Sun's:
core
atmosphere
surface
magnetic field
Answer:
The photosphere is the visible "surface" of the sun. So your answer would be C.
Explanation: its right
should scientist be allowed to do anything that they can?
No, because some scientist are bad and they must have a scientific attitude like honesty, curiosity, open-mindedness, optimistic and more. And they should follow others sometimes because for their own good.
Answer:
No
Explanation:
Science operates in the context of national and international laws, agreements and conventions. It requires scientists to conduct and communicate scientific work for the benefit of society, with excellence, integrity, respect, fairness, trustworthiness, clarity, and transparency.
A loop of wire carrying a current of 2.0 A is in the shape of a right triangle with two equal sides, each 15 cm long. A 0.7 T uniform magnetic field is parallel to the hypotenuse. The total magnetic force on the two equal sides has a magnitude of:Group of answer choices0.30 N0 N0.51 N0.41 N
Answer:
the total magnetic force on the 2 sides of the wire is 0.30 N
Option a) 0.30 N is the correct answer
Explanation:
Given the data in the question;
both the sides of the right angled triangle is the same and the magnetic is in the plane of the triangle and is perpendicular to the hypotenuse.
hence, angle between the magnetic field and both the sides of the triangle is 45 degrees.
∅ = 45°
I = 2.0 A
L = 15 cm = 0.15 m
B = 0.7 T
Total magnetic force on the 2 sides of the wire will be;
F = 2BILsin∅
we substitute
F = 2 × 0.7 × 2.0 × 0.15 × sin(45°)
F = 0.42 × 0.70710678
F = 0.2970 ≈ 0.30 N
Therefore, the total magnetic force on the 2 sides of the wire is 0.30 N
Option a) 0.30 N is the correct answer
Can someone tell me How many wavelength is in the picture
Hi please zoom in to see it clearly, uh you don’t have to answer them all but it would be nice !!! (no links please) :D