5. 75.0 g of 4.0°C water is heated until its temperature is 37°C. If the specific heat of water is 4.18 J/g°C, calculate the energy needed to cause this rise in temperature. SHOW YOUR WORK​

Theoretically, if 20 grams of hydrogen reacts then 112.5 grams of ammonia is produced.

The balanced chemical equation can be given as:

N₂+3H₂→ 2NH₃

From stoichiometry, 2 mol of NH₃is produced from 3 mol of H₂

5 mol of NH₃ will be produced from = 3/2×5 = 7.5 mol of H₂

∴mass of H₂=7.5×2= 15gm of H₂.

Excess reagents are those reactants in a chemical reaction that are not exhausted at the end of the reaction. A completely exhausted or reacted reagent is called a limiting reagent because its amount limits the number of products formed. In this reaction, the excess reagent is Nitrogen as 35 grams of nitrogen and 15 grams of hydrogen react to produce 34 grams of ammonia.

To learn more about ammonia, refer to the link:

https://brainly.com/question/29519032

#SPJ1

24. To calculate the molarity of a solution, we must first find out how many moles of [tex]BaI_2[/tex] are in the solution.

Molar mass of BaI2 = (1 x atomic mass of Ba) + (2 x atomic mass of I)

= (1 x 137.33 g/mol) + (2 x 126.90 g/mol)

= 137.33 g/mol + 253.80 g/mol

= 391.13 g/mol

Number of moles of BaI2 = mass of BaI2 / molar mass of BaI2

= 413 g / 391.13 g/mol

= 1.056 mol

the molarity of the solution using the formula:

Molarity (M) = moles of solute / volume of solution (in liters)

Volume of solution = 750 ml = 750 ml / 1000 ml/L = 0.750 L

Molarity = 1.056 mol / 0.750 L

= 1.408 M

Therefore, the molarity of the solution is 1.408 M.

25. a. [tex]P_20_7[/tex] - Ionic compound (Phosphorus(V) oxide)

b. [tex]SnBr_2[/tex] - Ionic compound (Tin(II) bromide)

c. [tex]Fe(OH)_2[/tex]-  Ionic compound (Iron(II) hydroxide)

d. [tex]Cl_30_8[/tex] - Not a valid chemical formula

26.

A. (NH4)2CO3 is soluble in water (NH4) in an ionic substance called 2CO3 containing the ions carbonate and ammonium.

B. Fe(OH)2 is insoluble in water. Iron(II) hydroxide is only sparingly soluble.

C. CaOH is not soluble in water. Only very little calcium hydroxide is soluble.

D. PbCl2 is insoluble in water. The chloride of lead(II) is sparingly soluble.

27. FeS + 2KCl = FeCl2 + K2S

FeS is an insoluble precipitate.

2KCl dissolves in aqueous solution.

ZnCl2 + SrSO4 = ZnSO4 + SrCl2

SrSO4 is an insoluble precipitate.

ZnCl2 dissolves in aqueous solution.

28. In salt water, the solute is the salt (sodium chloride, or NaCl), and the solvent is water. The element which dissolves in the solvent to form a solution is called solute.

29. Charles's law states that, if the pressure and volume of a gas remain constant, the volume of a gas falls as the temperature increases. As a result, the capacity of the balloon will decrease as it ascends to altitudes where the temperature is -15 °C.

30. The average kinetic energy of the particles of a substance increases with increase in its temperature. This is because temperature is a gauge for the specific kinetic energy of the constituent particles of a substance. On the other hand, the average kinetic energy falls as the temperature increases.

31. When the volume of a gas decreases, its pressure increases. Boyle's law, which states that at a given temperature, the pressure of a gas is inversely proportional to its volume, describes this relationship. On the other hand, pressure falls when volume increases.

32. The pressure of a gas increases along with its temperature. Gay–Lussac's law, which states that the pressure of a gas is directly proportional to its temperature, given the volume and volume of the gas is constant, describes this relationship.

33. The volume of a syringe is reduced as a marshmallow is pressed and the plunger is depressed. As a result the pressure inside the syringe increases. This is because Boyle's law states that the volume and pressure of a gas are inversely proportional. The decrease in volume causes the air inside the syringe to contract, exerting more pressure on the marshmallow, which is then crushed.

Learn more about Charles's law, here:

https://brainly.com/question/12835309

#SPJ1

The volume the gas will occupy at pressure of 138.7 KPa, given that the temperature remains the same is 136 mL

The new volume of the gas, given that the new pressure is 138.7 KPa can be obtained as follow:

P₁V₁ = P₂V₂

Inputting the given parameters, we have:

135.5 × 139.3 = 138.7 × V₂

18875.17 = 138.7 × V₂

Divide both side by 138.7

V₂ = 18875.17 / 138.7

V₂ = 136 mL

Thus, we can conclude that the volume of the gas will be 136 mL

Learn more about volume:

https://brainly.com/question/14560487

#SPJ1

Answer:

Question 1:

1: a metal and a nonmetal

3: a metal and a polyatomic anion

4: a polyatomic cation and a metal

Question 2:

Cations give away electrons and anions accept those electrons

The dissociation of sodium chloride in water allows it to act as an electrolyte, conducting electricity through the movement of ions.

The bonding between sodium and chlorine is classified as ionic bonding. In this type of bonding, electrons are transferred from one atom to another, resulting in the formation of ions. Sodium (Na) readily donates one electron from its outermost shell to achieve a stable electron configuration, while chlorine (Cl) accepts this electron to fill its outermost shell. As a result, sodium forms a positively charged ion (Na+), known as a cation, while chlorine forms a negatively charged ion (Cl-), known as an anion. The electrostatic attraction between these oppositely charged ions creates a strong bond between sodium and chlorine, forming sodium chloride (NaCl) as the resulting compound.

When sodium chloride is dissolved in water, the compound dissociates into separate sodium cations and chloride anions. Water molecules, which have a polar nature, surround the individual ions due to their attraction to opposite charges. This process is called hydration or solvation. The water molecules effectively separate the sodium and chloride ions, leading to the compound's dissolution. This is because water molecules have a higher affinity for the charged ions compared to the ionic bond holding the compound together.

For more such questions on chloride

https://brainly.com/question/28106660

#SPJ8

We can use the following formula to determine how many grams of AgNO3 are needed to make a 0.30 M solution with a volume of 750 ml:

moles = volume (L) x concentration (M)

The volume provided must first be converted from milliliters to liters:

Volume = 750 ml ÷ 1000 ml/L = 0.75 L

Now we can find the molarity of AgNO3:

moles = 0.30 M × 0.75 L = 0.225 moles

To find the grams of AgNO3, we need to use the molar mass of AgNO3, which is calculated as follows:

Ag: 1 atom × 107.87 g/mol = 107.87 g/mol

N: 1 atom × 14.01 g/mol = 14.01 g/mol

O: 3 atoms × 16.00 g/mol = 48.00 g/mol

Total molar mass of AgNO3:

107.87 g/mol + 14.01 g/mol + 48.00 g/mol = 169.88 g/mol

Now, we can calculate the grams of AgNO3 needed:

grams = moles × molar mass

grams = 0.225 moles × 169.88 g/mol = 38.22 grams

Therefore, approximately 38.22 grams of AgNO3 are needed to prepare 750 ml of a 0.30 M solution.

Learn more about molar mass, here:

https://brainly.com/question/31545539

#SPJ1

Answer:

Particulate matter pollution decreases the amount of sunlight plants can absorb for photosynthesis.

Explanation:

An impact of the specific heat of the water on the planet is that islands and coastal places have moderately pleasant climates. Therefore, option A is correct.

The specific heat of water is relatively high compared to other substances. This means that water requires a significant amount of heat energy to increase its temperature. As a result, water has a stabilizing effect on the climate of coastal and island regions.

The high specific heat of the water helps to moderate temperature changes, resulting in milder and more pleasant climates in these areas.

Learn more about specific heat, here:

https://brainly.com/question/31608647

#SPJ1

7.54 *[tex]10^8[/tex] meters is  75.4 nanometers.

To convert 7.54 *  [tex]10^8[/tex] meters to nanometers, you can multiply the value by [tex]10^9[/tex]

as,  [tex]10^9[/tex]nanometers = 1  meter.

7.54 * [tex]10^8[/tex] m * [tex]10^9[/tex] =  7.54 x [tex]10^1[/tex] nm

Therefore, 7.54 *[tex]10^8[/tex] meters is equal to 75.4 nanometers.

learn more about conversion:

https://brainly.com/question/13076223

To convert 7.54 x 10^-8 meters to nanometers, you multiply 7.54 x 10^-8 by 1 x 10^9 to get 75.4 nanometers.

To convert meters to nanometers, you need to know that 1 meter is equivalent to 1 x 109 nanometers. Therefore, if you were to convert 7.54 x 10-8 m to nanometers, you would multiply 7.54 x 10-8 by 1 x 109.

Here's how you'd do it: 7.54 x 10-8 m * 1 x 109 nm/m = 75.4 nm. So, 7.54 x 10-8 meters is equivalent to 75.4 nanometers.

https://brainly.com/question/32030244

#SPJ2

To determine the molal concentration of a solution, we need to know the amount of solute (ethanol) in moles and the mass of the solvent (usually water) in kilograms.

Given that the solution is 30% ethanol, it means that there are 30 grams of ethanol in 100 grams of the solution. Let's assume we have 100 grams of the solution.

To find the amount of ethanol in moles, we need to convert grams to moles using the molar mass of ethanol (C2H5OH).

The molar mass of C2H5OH:

2 * atomic mass of carbon (C) = 2 * 12.01 g/mol = 24.02 g/mol

6 * atomic mass of hydrogen (H) = 6 * 1.01 g/mol = 6.06 g/mol

1 * atomic mass of oxygen (O) = 1 * 16.00 g/mol = 16.00 g/mol

1 * atomic mass of hydrogen (H) = 1 * 1.01 g/mol = 1.01 g/mol

Total molar mass of C2H5OH = 24.02 + 6.06 + 16.00 + 1.01 = 47.09 g/mol

Now, let's calculate the amount of ethanol in moles:

30 grams ethanol * (1 mol / 47.09 g) = 0.637 moles ethanol

Next, we need to determine the mass of the solvent (water) in kilograms. Let's assume we have 100 grams of the solution, so the mass of water would be 100 - 30 = 70 grams.

Converting the mass of water to kilograms:

70 grams * (1 kg / 1000 grams) = 0.07 kg

Finally, we can calculate the molal concentration (m) using the formula:

molal concentration (m) = moles of solute/mass of solvent in kilograms

m = 0.637 moles / 0.07 kg ≈ 9.10 mol/kg

Therefore, the molal concentration of the 30% ethanol solution (C2H5OH) is approximately 9.10 mol/kg.

For more details regarding molal concentration, visit:

https://brainly.com/question/11716136

#SPJ1

At the usual working conditions of 101.5 kPa and 21°C, the chemical oxygen generator system would generate roughly 220.84 litres of oxygen using 500 g of LiClO4.

We may use the ideal gas law and stoichiometry to calculate how many litres of oxygen are created by the chemical oxygen generator system employing 500 g of LiClO4.

We must first determine the moles of LiClO4. LiClO4 has a molar mass of approximately 106.39 g/mol. As a result, 4.704 mol of LiClO4 are produced from 500 g of LiClO4 using the formula: 500 g / 106.39 g/mol

We can see from the chemical equation that 1 mole of LiClO4 results in 2 moles of O2. 4.704 mol of LiClO4 will therefore result in:

2 mol O2 / 1 mol LiClO4 4.704 mol LiClO4 = 9.408 mol O2

The moles of O2 under the specified conditions must then be converted to volume. The ideal gas law, which goes as follows:

PV = nRT

Where:

P = pressure = 101.5 kPa

V = volume (in liters)

n = moles of gas = 9.408 mol

R = ideal gas constant = 8.314 J/(mol·K)

T = temperature = 21°C = 294 K (converted to Kelvin)

Rearranging the equation to solve for V:

V = (nRT) / P

V = (9.408 mol × 8.314 J/(mol·K) × 294 K) / (101.5 kPa × 1000 Pa/kPa)

Simplifying the units:

V = (9.408 × 8.314 × 294) / 101.5

V ≈ 220.84 liters

For more such questions on oxygen

https://brainly.com/question/15457775

#SPJ8

Answer:

the water arrives on the earth in the form of water rich objects(planetesimals)

The name for H2SO4(aq) is Sulfuric acid.

Sulfuric acid (H2SO4) is a highly corrosive and strong acid. It is one of the most important industrial chemicals produced worldwide. Sulfuric acid is commonly used in various industries for a wide range of applications. It is used in the production of fertilizers, detergents, dyes, pharmaceuticals, and various chemical processes.

Sulfuric acid is also utilized in laboratories for its acidic properties and as a dehydrating agent due to its strong affinity for water. It is a dense, oily liquid that is colorless when pure but can appear yellowish or brownish due to impurities. When handling sulfuric acid, caution must be exercised as it can cause severe burns and is harmful if ingested or inhaled.

Learn more about Sulfuric acid on:

https://brainly.com/question/1107054

#SPJ1

Some examples of chemical compounds that are formed by swapping the valencies are:

In chemistry, one can analyze an element's combining capacity with other atoms through its valency, crucial for creating chemical compounds or molecules.

Recently, an article featured a comparable description detailing atomic valence as "the electrons utilized by the atom during bonding." There are also two distinct formulas available to determine the element's level of valence.

Learn about valency electron here https://brainly.com/question/28896521

From the uncompleted equation, we have:

LiOH + HBr ->

Since we have two ionic substance reacting, we can conclude that the type of reaction is double displacement reaction as the reaction will involve exchange of ions between the reacting species.

The products of the reaction can be obtained by balancing the equation. This is shown below:

LiOH + HBr ->

By exchange of ion, we have

LiOH + HBr -> LiBr + H₂O

Now, observing the equation, we can see that the equation is balanced.

Thus, the products of the reaction are LiBr and H₂O

Learn more about balancing equation:

https://brainly.com/question/12192253

#SPJ1

Answer:

The limiting reactant is BF3 because there is less of it than Li2SO4.

Explanation:

Answer:

a. P2O7 - This is a covalent compound. P and O have similar electronegativities and they form a covalent bond between them, rather than an ionic bond.

b. SnBr2 - This is a covalent compound. Sn and Br have different electronegativities, but they still form a covalent bond due to their relatively small difference in electronegativity.

c. Fe(OH)2 - This is an ionic compound. Fe has a higher electronegativity than O and H, so it tends to donate its electrons and become positively charged. This results in the formation of ionic bonds between Fe and OH.

d. Cl3O8 - This is a covalent compound. Cl and O have similar electronegativities, so they form covalent bonds rather than ionic bonds.

Answer:

[tex]\huge\boxed{\sf 1.869\ L}[/tex]

Explanation:

Given that,

Mass = m = 2.67 g

Molar mass (O₂) = 16 × 2 = 32 g/mol

We know that,

No. of moles = 2.67 / 32

No. of moles = 0.08 moles

Also, we know that:

1 × 0.08 moles of O₂ at STP = 22.4 × 0.08 L

So, the volume of 0.08 moles of oxygen gas at STP will be 1.869 L.

[tex]\rule[225]{225}{2}[/tex]

The following chemical equations must be balanced:

1. N2 + 3 H2 → 2 NH3

Type: Synthesis reaction

2. 2 KClO3 → 2 KCl + 3 O2

Type: Single Replacement reaction

3. 2 NaF + ZnCl2 → ZnF2 + 2 NaCl

Type- Decomposition reaction

4. 2 AlBr3 + 3 Ca(OH)2 → Al2(OH)6 + 6 CaBr2

Type- Double Replacement reaction

5. 2 H2 + O2 → 2 H2O

Type: Combustion reaction

6. 2 AgNO3 + MgCl2 → 2 AgCl + Mg(NO3)2

Type: Synthesis reaction

7. 2 Al + 6 HCl → 2 AlCl3 + 3 H2

Type: Decomposition reaction

8. C3H8 + 5 O2 → 3 CO2 + 4 H2O

Type: Combustion reaction

9. 2 FeCl3 + 6 NaOH → Fe2O3 + 6 NaCl + 3 H2O

Type: Double Replacement reaction

10. 4 P + 5 O2 → 2 P2O5

Type: Synthesis reaction

11. 2 Na + 2 H2O → 2 NaOH + H2

Type: Single Replacement reaction

12. 2 Ag2O → 4 Ag + O2

Type: Decomposition reaction

13. C6H12O6 + 6 O2 → 6 CO2 + 6 H2O

Type: Combustion reaction

14. 2 KBr + MgCl2 → 2 KCl + MgBr2

Type: Double Replacement reaction

15. 2 HNO3 + Ba(OH)2 → Ba(NO3)2 + 2 H2O

Type: Double Replacement reaction

16. C5H12 + 8 O2 → 5 CO2 + 6 H2O

Type: Combustion reaction

17. 4 Al + 3 O2 → 2 Al2O3

Type: Synthesis reaction

18. Fe2O3 + 2 Al → 2 Fe + Al2O3

Type: Single Replacement reaction

Learn more about Chemical reactions, here:

https://brainly.com/question/14929452

#SPJ1

The amount of time it will take for the reaction to consume 6.02 x 10²³ molecules of reactant is 3.67 × 10² seconds.

The amount of time it will take for a molecule to react can be calculated by dividing the number of molecules in the substance by the rate of time as follows;

Time taken = no of molecules ÷ no of molecules/seconds

According to this question, if a chemical reaction consumes reactants at a steady rate of 1.64 x 10²¹ molecules per second, the amount of time it will take for the reaction to consume 6.02 x 10²³ molecules of reactant is as follows!

Time = 6.02 x 10²³ molecules ÷ 1.64 x 10²¹ molecules per second

Time = 3.67 × 10² seconds

Learn more about molecules at: https://brainly.com/question/30465503

#SPJ1

The boiling point of a solution is influenced by the presence of solute particles, which can cause a change in the boiling point compared to the pure solvent. This phenomenon is known as boiling point elevation.

The magnitude of boiling point elevation depends on the concentration of the solute and the nature of the solute particles. In general, the greater the concentration of solute particles, the greater the boiling point elevation.

Comparing a 0.5m sodium chloride (NaCl) solution to a 0.3m aluminum sulfate ([tex]Al_2(SO_4)_3[/tex]) solution, we can determine the relative boiling point elevation.

Sodium chloride (NaCl) dissociates into two ions in solution (Na+ and Cl-), while aluminum sulfate ([tex]Al_2(SO_4)_3[/tex])dissociates into three ions (2[tex]Al_3[/tex]+ and 3[tex]SO_4[/tex]2-). This means that the aluminum sulfate solution will have a greater concentration of solute particles per mole than the sodium chloride solution.

Therefore, the boiling point of the 0.5m sodium chloride solution will be lower than the boiling point of the 0.3m aluminum sulfate solution.

For more details regarding boiling point, visit:

https://brainly.com/question/2153588

#SPJ1

There are approximately 2.8939 x[tex]10^2^4[/tex] carbon atoms in 0.37 mol of procaine.  The molecular formula of procaine (C₁₃H₂₀N₂₀₂), one can see that there are 13 carbon atoms (C13) in one molecule of procaine.

Avogadro's number (6.022 x [tex]10^2^3[/tex]) represents the number of particles (atoms, molecules, or formula units) in one mole of a substance

The number of molecules of procaine in 0.37 mol:

Number of molecules = 0.37 mol x (6.022 x[tex]10^2^3[/tex] molecules/mol)

Number of carbon atoms = Number of molecules x 13 carbon atoms/molecule

Number of molecules = 0.37 mol x (6.022 x [tex]10^2^3[/tex]molecules/mol)

= 2.22614 x [tex]10^2^3[/tex]molecules

Number of carbon atoms = 2.22614 x [tex]10^2^3[/tex] molecules x 13 carbon atoms/molecule

= 2.8939 x [tex]10^2^4[/tex]carbon atoms

Learn more about the atoms here

https://brainly.com/question/10847297

#SPJ1

The underlying foundation of all these emissions can be traced back to the burning of fossil fuels, making it the dominant and pervasive cause of human-induced greenhouse gas emissions.

The human activity that is intricately connected to every piece of the pie chart representing greenhouse gas emissions is the burning of fossil fuels. Fossil fuel combustion, including coal, oil, and natural gas, is the primary contributor to the rise in greenhouse gas concentrations over the past 150 years. When these fuels are burned for energy generation, transportation, industrial processes, and residential use, carbon dioxide (CO2) is released into the atmosphere. CO2 is the most significant greenhouse gas, accounting for approximately 75% of total emissions. The other greenhouse gases, such as methane (CH4) and nitrous oxide (N2O), are also released as byproducts of certain human activities, such as agriculture, deforestation, and waste management.

For more such questions on fuels

https://brainly.com/question/29429802

#SPJ8

The conjugate acid-base pairs in the reaction between ammonia and hydrofluoric acid in aqueous solution are NH3/NH4+ and HF/F-.

In the reaction between ammonia (NH3) and hydrofluoric acid (HF) in aqueous solution, the following conjugate acid-base pairs can be identified:

NH3 (ammonia) and NH4+ (ammonium ion):

Ammonia (NH3) acts as a base by accepting a proton (H+) from hydrofluoric acid (HF) to form the ammonium ion (NH4+). In this reaction, ammonia acts as a Lewis base by donating an electron pair to the proton, resulting in the formation of the ammonium ion as the conjugate acid.

HF (hydrofluoric acid) and F- (fluoride ion):

Hydrofluoric acid (HF) acts as an acid by donating a proton (H+) to ammonia (NH3) to form the fluoride ion (F-).

In this reaction, hydrofluoric acid acts as a Lewis acid by accepting an electron pair from ammonia, resulting in the formation of the fluoride ion as the conjugate base.

To summarize, in the reaction NH3 (aq) + HF (aq) = NH4+ (aq) + F- (aq), the conjugate acid-base pairs are NH3/NH4+ and HF/F-. Ammonia (NH3) is the base that forms its conjugate acid, the ammonium ion (NH4+), while hydrofluoric acid (HF) is the acid that forms its conjugate base, the fluoride ion (F-).

It is important to note that in an aqueous solution, ammonia is present as NH3 molecules, and hydrofluoric acid dissociates into H+ and F- ions. The resulting ammonium ion (NH4+) and fluoride ion (F-) remain in the solution.

For more question on aqueous visit:

https://brainly.com/question/19587902

#SPJ8

Answer:

Thermal Conduction

Explanation:

Option B of 1 is correct, option B of 2 is correct, option B of 3 is correct, and option A of 4 is correct. 1. Since the current energy level (200 J) is less than the minimum energy required (240 J), the reaction will not proceed.

2. Increasing the temperature by 20 degrees Celsius adds 50 J of energy. However, even with this additional energy, the total energy level (200 J + 50 J = 250 J) is still less than the minimum energy required (240 J). Therefore, the reaction will not proceed.

3. Increasing the concentration by 1.5 M adds 30 J of energy. However, the energy level contribution from concentration is usually negligible compared to temperature. Therefore, even with this additional energy, the total energy level will still be less than the minimum energy required. The reaction will not proceed.

4. Increasing the temperature by 20 degrees Celsius adds 50 J of energy, and increasing the concentration by 1.5 M adds 30 J of energy. The total energy added is 50 J + 30 J = 80 J. The current energy level (200 J + 80 J = 280 J) is now higher than the minimum energy required (240 J). Therefore, with these additional changes, the reaction will proceed.

Learn more about energy levels, here:

https://brainly.com/question/30546209

#SPJ1

Answer:

Overall, energy is released in exothermic and absorbed in endothermic reactions. Therefore, "a" is the correct statement. The other statements are all incorrect.

Explanation:

u suck