Answer:
Limited Genetic Variability
Explanation:
its 3
Balancing chemical equation
_CoBr3 + _CaSO4 -> _CaBr2 + _Co2 (SO4)2
- solution please
Answer:
2 CoBr3 + 3 CaSO4 = 3 CaBr2 + Co2(SO4)2
Explanation:
Given the diagram to the right what is true about the missing volume?
Answer:
C
Explanation:
Boyle's law states that "the volume of a given mass of gas is inversely proportional to its pressure at constant temperature."
Inverse proportionality means that as one quantity is increasing, the other quantity is decreasing and vice versa.
Hence, as the pressure was increased, the volume decreases accordingly in obedience to Boyle's law.
Answer:
What is TRUE about the missing volume is option C.
C. The volume will decrease due to inverse relationship of V & P
Explanation:
The given parameters of the gas are;
The initial pressure of the gas, P₁ = 2 atm
The initial volume of the gas, V₁ = 1.5 L
The final pressure of the gas, P₂ = 2 atm
Boyle's law states that, at constant temperature, the volume, 'V', of a given mass is inversely proportional to its pressure, 'P';
Mathematically, Boyle's law can be expressed as follows;
P ∝ 1/V
From which we have;
P·V = Constant
∴ P₁·V₁ = P₂·V₂
For the given gas, we get;
2 atm × 1.5 L = 6 atm × V₂
∴ V₂ = 2 atm × 1.5 L/(6 atm) = 0.5 L
Therefore, the volume decreases from 1.5 L to 0.5 L.
b) If 35 grams of copper (II) chloride react with 20 grams of sodium nitrate, how much sodium chloride can be formed? what is the limiting reactant ? what is the excessive reactant ?
Answer:
CuCl₂ is the excessive reactant and NaNO₃ the limiting reactant, 13.7g of NaCl can be formed.
Explanation:
Based on the reaction:
CuCl₂ + 2NaNO₃ → 2NaCl + Cu(NO₃)₂
To solve the problem we must convert the mass of each reactant in order to find limiting reactant as follows:
Moles CuCl₂ -Molar mass: 134.45g/mol-:
35g * (1mol / 134.45g) = 0.26 moles
Moles NaNO₃ -Molar mass: 84.99g/mol-:
20g * (1mol / 84.99g) = 0.235 moles
For a complete reaction of 0.235 moles of NaNO₃ there are required:
0.235 moles NaNO₃ * (1 mol CuCl₂ / 2 mol NaNO₃) = 0.118 moles CuCl₂
As there are 0.26 moles CuCl₂,
CuCl₂ is the excessive reactant and NaNO₃ the limiting reactantAs 2 moles of NaNO₃ produce 2 moles of NaCl, he moles of NaCl produced are: 0.235 moles NaCl. The mass is:
Mass NaCl -Molar mass: 58.44g/mol-:
0.235 moles NaCl * (58.44g / mol) =
13.7g of NaCl can be formed2. Which of these helps to avoid muscle injuries while exercising?
A:exercising vigorously when muscles are stiff to warm them up
B:slowly and gently stretching muscles before hard exercise
C.pushing through exercise with hurt muscles
D;bursting into hard activity after being still for a while
Answer:
B
Explanation:
It is important to stretch your muslces as a warm up prior to any exercise.
Answer:
B
Explanation:
um can someone help balance this...id.k how
CH4 + 2 O2 = CO2 + 2 H2O
i believe it's this :p
hello my BEANS i want to know if u r a girl or a boy so if i call u a boy and u r a girl i am not a bad person i am 13 and i am good and not a robot pls dont repot me pls
Answer:
okie
Explanation:
imma girl
a sample of gas at 25.0 c has a volume of 11.0 L and exerts a pressure of 660.0 mmHg. how many moles of gas are in the sample
Answer: 0.391
Explanation:
Ideal gas law is valid only for ideal gas not for vanderwaal gas. Therefore, 0.38moles of gas are in the sample. Ideal gas is a hypothetical gas.
What is ideal gas equation?Ideal gas equation is the mathematical expression that relates pressure volume and temperature. There is no force of attraction between the particles.
Mathematically the relation between Pressure, volume and temperature can be given as
PV=nRT
where,
P = pressure of gas sample = 660.0mmHg=0.86atm
V= volume of gas sample =11.0 L
n =number of moles of gas sample=?
T =temperature of gas =298K
R = Gas constant = 0.0821 L.atm/K.mol
Substituting all the given values, we get
0.86atm×11.0 L =n× 0.0821×298
On calculation we get
9.46=n×24.4
number of moles of sample=0.38moles
Therefore, 0.38moles of gas are in the sample.
To learn more about ideal gas equation, here:
https://brainly.com/question/14826347
#SPJ2
What is the most important factor that determines Earth’s temperature?
Answer:
sunlight
Explanation:
the greatest factor affecting Earth is sunlight. Sun provides energy for living organisms, and it drives our planet's weather and climate by creating temperature gradients in the atmosphere and oceans.
Help me plz I’m like slow
Answer:
probably A that's my best guess
Answer:
Hello There!!
Explanation:
The answer is A.H20.This is water which isn't an ionic compound.
hope this helps,have a great day!!
~Pinky~
Can someone please help me with 1,2,3 please
Which substance cannot be separated or broken down into simpler substances by chemical means?
table salt
gold wire
candle wax
water vapor
Answer: Gold Wire
Explanation:
Out of all of these options only gold wire is an element, elements are pure and cannot be broken down by any chemical means
hope it helped, good luck :)
When H+ forms a Bond with H2O to form the Hydronium ion H3 plus this bond is called a coordinate covalent bond because
Answer:
Because both the bonding electrons come from the oxygen atom. Explanation: A coordinate covalent bond is formed when both the bonding electrons are coming from the same atom
Explanation:
how many moles are 2.54×10^29 molecules of H20
Answer:
Explanation: The number of atoms is an exact number, the number of mole is an exact number; they do not affect the number of significant figures. The average mass of one mole of H2O is 18.02 grams. This is stated: the molar mass of water is 18.02 g/mol.
What does dalton mean
Answer:
Meaning:from the valley town; the settlement in the valley. Sounding like the proper English surname it was derived from, Dalton is all about being smart and trendy with equal parts cool and nerdy. Dalton, which comes from “dael” or “valley,” and “tun,” or “settlement,” may have peaked in the 1990s, but that's okay.
Explanation:
a unit used in expressing the molecular weight of proteins, equivalent to atomic mass unit.
Answer:
A unit used in expressing the molecular weight of proteins, equivalent to atomic mass unit.
Or in simpler terms a unit of measure.
Explanation:
Hope this helps and have a great say!!!!
Of the following elements aluminum, magnesium, aluminum, silicon, and sodium which has the smallest atomic radius? Explain your answer.
Answer:
Sodium
Explanation:
Radius grows as you go down and to the right on the ptable.
Which part of the nervous system analyzes the information and initiates a response
Answer:
CNS (central nervous system)
Explanation:
The central nervous system is responsible for integrating sensory information and responding accordingly.
Neurons (specialized cells of the nervous system ) send signals along thin fibers called axons and communicate with other cells by releasing chemicals called neurotransmitters at cell-cell junctions called synapses.
Find [H+] of a 0.056 M hydrofluoric acid solution. Ka = 1.45 x 10-7
Answer: [tex][H^+][/tex] of 0.056 M HF solution is [tex]8.96\times 10^{-5}[/tex]
Explanation:
[tex]HF\rightarrow H^+F^-[/tex]
cM 0 0
[tex]c-c\alpha[/tex] [tex]c\alpha[/tex] [tex]c\alpha[/tex]
So dissociation constant will be:
[tex]K_a=\frac{(c\alpha)^{2}}{c-c\alpha}[/tex]
Give c= 0.056 M and [tex]\alpha[/tex] = ?
[tex]K_a=1.45\times 10^{-7}[/tex]
Putting in the values we get:
[tex]1.45\times 10^{-7}=\frac{(0.056\times \alpha)^2}{(0.056-0.056\times \alpha)}[/tex]
[tex](\alpha)=0.0016[/tex]
[tex][H^+]=c\times \alpha[/tex]
[tex][H^+]=0.056\times 0.0016=8.96\times 10^{-5}[/tex]
Thus [tex][H^+][/tex] of 0.056 M HF solution is [tex]8.96\times 10^{-5}[/tex]
write any two equations to illustrate that hydrogen gas is a reducing agent
What is the pH and pOH of a 2.2 x 10^-3 HBr solution?
Answer:
The pH and pOH of a 2.2*10⁻³ HBr solution is 2.66 and 11.34 respectively.
Explanation:
pH - short for hydrogen potential - is a measure of the acidity or alkalinity of a solution. So the pH is a parameter that indicates the concentration of hydrogen ions [H]⁺ that exist in a solution.
The pH is expressed as the negative base 10 logarithm of the hydrogen ion concentration. This is represented by:
pH= - log [H⁺]
pH is measured on a scale of 0 to 14. On this scale, a pH value of 7 is neutral, which means that the substance or solution is neither acidic nor alkaline. A pH value of less than 7 means that it is more acidic, and a pH value of more than 7 means that it is more alkaline.
HBr is a strong acid. Then, in aqueous solution it will be totally dissociated. So the proton concentration is equal to the initial concentration of acid:
[H⁺]= [HBr]= 2.2*10⁻³ M
So:
pH= - log (2.2*10⁻³)
pH= 2.66
On the other hand, pOH is a measure of the concentration of hydroxyl ions in a solution. The sum of pH and pOH equals 14:
pH + pOH= 14
2.66 + pOH= 14
pOH= 14 - 2.66
pOH= 11.34
The pH and pOH of a 2.2*10⁻³ HBr solution is 2.66 and 11.34 respectively.
WILL GIVE BRANLIEST!! EASY BUT I WAS TO LAZY TO LEARN!! WILL FOREVER BE GREATFUL!!! WILL GIVE BRANLIEST!! EASY BUT I WAS TO LAZY TO LEARN!! WILL FOREVER BE GREATFUL!!!
WILL GIVE BRANLIEST!! EASY BUT I WAS TO LAZY TO LEARN!! WILL FOREVER BE GREATFUL!!!
5. What type of reaction would the heat calculation in previous question be classified as?
A) Natural
B) Chemical
C) Endothermic
D) Exothermic
7. What causes the volume to change in gases? (Choose all that apply)
A) Density
B) Temperature
C) Shape of container
D) Pressure
Answer:
for the first one we need the previous question to be able to answer it. for the second one density and temperature
Explanation:
Would glucose be considered a natural resource of synthetic product?
H2SO4 + 2NaOH → Na2SO4 + 2H2O what volume of water vapor will be produced if you start with 71.5 g of sulfuric acid and excess of sodium hydroxide
Answer:
Explanation:
Find the molar mass of H2SO4
2H = 2 * 1 = 2
S = 1 * 32 =32
O4 = 4*16 = 64
total 98
Find the number of mols in 71.5 grams
mols = given mass / molar mass.
given mass = 71.5
molar mass = 98
mols = 71.5/98
mols = 0.7296 mols of H2SO4
Find the moles of H2O
From the Balanced equation, every mol of H2SO4 produces 2 moles of H2O
mols water = 2 * 0.7296
mols water = 1.4592
That's as far as I can take you. I have to know a great deal more to get the volume of H2O
Gerald's science teacher mixed liquid X and liquid Y, both at room-temperature, in a large beaker. two beakers of clear solutions to the left of a right-pointed arrow, and a large beaker with a clear solution to the right of the arrow The mixture in the large beaker still looked clear like water, but when the students, one at a time, carefully touched the outside of the large beaker, it felt warm to the touch. Why did the large beaker most likely feel warm? A. The two liquids were not soluble in water. B. The release of a gas heated the solution. C. A chemical reaction produced a new substance. D. The energy of mixing warmed the liquids.
Answer:
c
Explanation:
A chemical reaction produced a new substance. In a chemical reaction, the atoms that make up the reactants are rearranged to produce various products.
What is chemical reaction?chemical reaction, the transformation of one or more chemicals (the reactants) into one or more distinct compounds (the products). Chemical elements or chemical compounds make up substances.
A chemical reaction is one in which two or more reactants will react to form a new substance. When new substance will form it will produce heat. Therefore, when science teacher was mixing two liquids it was generating heat.
Heating a substance allow molecules to move faster. When heat is given to the object it will move fast. When heat will apply to a solid it will turn into liquid. When heat is supplied to the liquid it will turn into gas.
Therefore, A chemical reaction produced a new substance. In a chemical reaction, the atoms that make up the reactants are rearranged to produce various products.
To learn more about chemical reaction, refer to the link:
https://brainly.com/question/22817140
#SPJ5
NEED ANSWER ASAP
You are asked to make 500. mL of a 0.250 M NaCl solution. How many moles of NaCl would you need?
The moles of sodium chloride we need to make 500mL solution is 0.125 mole.
What is molarity?Molarity of any solution tells about the concentration and it is define as the no. of moles of solute present in per liter of solution, and it is represented as:
M = n/V, where
M = molarity of given NaCl solution = 0.250M
V = volume of NaCl solution = 500mL = 0.5L
No we put these values on the above equation and calculate for n, we get:
n = (0.250M)(0.5L) = 0.125 mole
Hence, required moles of NaCl is 0.125 mole.
To know more about molarity, visit the below link:
https://brainly.com/question/489225
How do i design a controlled experiment to appropriately test a hypothesis?
Answer:
you need only one independent variable because if not, you wont know what factors have changed your experiment.
Explanation:
Please help help help help
Answer:
50000 dollars or 5 e5
Explanation:
Mr. Garibay has [tex]5.0 * 10^4[/tex] dollars in his bank.
Scientific notation represents the data in the format of expanded number or with e character.
For instance, 5.0 * 10^4 dollars = 50000 dollars or 5 e5
how do you think petals protect the internal structures of a plant?
Answer:
hmm that is a very tricky question. probably from over flooding with water
Both the appearance and cooking times of food items are affected by the way a piece of food is:
Select one:
a. examined.
b. tenderized.
c. purchased.
d. cut.
Answer:
D.
cut.
Explanation:
Both the appearance and cooking times of food items are affected by the way a piece of food is cut. Thus option D is correct.
what are the types of food ?
Food has an important role in both culture and cuisine of every country, Different types of food combine to form culinary delights which can bring people together
Food is obtained from both plants and animals where Plants are the primary producers in the food pyramid and all organism directly or indirectly obtain food from plants.
Herbivorous animals get their food from their plant ecosystem where Some animals, obtain food by hunting other animals while others depend on decaying matter of plants and animals which are called decomposers like bacteria, fungi.
Food offers variety forms depend upon climatic conditions and availability and depend on the different factors like Physical determinants ,Biological determinants, Economical determinants.
Thus option D is correct.
Learn more about food, here:
https://brainly.com/question/24177594
#SPJ2
2.0 L of a gas is at STP. What is the new pressure in kPa if the volume changes to 10.5 L and the temperature and # of molecules remain constant?
Answer:
What is the new volume if the temperature is constant? V=2.50L. P = lookPa. P2=40k Pa. V2 = x. PV = P2 ... If a sample of gas occupies 6.8 L at 327°C
What are three main ocean currents?