Answer:
132 N
Explanation:
Given that a 1.1 kg hammer strikes a nail. Before the impact, the hammer is moving at 4.5 m/s; after the impact it is moving at 1.5 m/s in the opposite direction. If the hammer is in contact with the nail for 0.025 s, what is the magnitude of the average force exerted by the hammer on the nail
From Newton 2nd law of motion,
Change in momentum = impulse.
Change in momentum = m( V - U )
Substitute all the parameters into the formula
Change in momentum = 1.1 ( 4.5 - 1.5 )
Change in momentum = 1.1 × 3
Change in momentum = 3.3 kgm/s
Impulse = Ft
That is,
Ft = 3.3
Substitute time t into the formula above
F × 0.025 = 3.3
F = 3.3 / 0.025
F = 132 N
Therefore, the magnitude of the average force exerted by the hammer on the nail is 132 N.
An object starts from rest and undergoes uniform acceleration. From 3.44s to 9.49s it travels 2.9m. What is the average velocity of the object during the time interval 18.6s to 22.92s (in m/s )?
First, see that in the time interval 3.44 to 9.49, the average velocity is [tex]2.9\text{m} / (9.49\text{s} - 3.44\text{s})=2.9\text{m}/6.05\text{s} \approx 0.479\text{m/s}[/tex]. So, as we have uniform acceleration, the velocity must be linearly increasing over this entire interval, so for the average to be 0.479 m/s over this interval, the velocity must be 0.479 m/s in the exact middle of this interval, or at 5.465s.
We now note that the object starts from rest, which means that at 0s, the velocity is 0 m/s. So, in 5.465 seconds, the velocity increases by 0.479 m/s. We again have that the object undergoes uniform acceleration, meaning that the acceleration over this interval is a constant [tex]\frac{0.479\text{m/s}}{5.465\text{s}} \approx 0.0876 \text{m/s}^2[/tex].
Finally, note again that as we are looking at uniform acceleration, by the same principle at the beginning, the average velocity of the object during the time interval from 18.6s to 22.92s is the same as the velocity at the exact middle of this interval, or at 20.76s. We have that acceleration is constant and 0.0876 m/s^2, and initial velocity is 0 at 0s. So, in 20.76 seconds, the object will have accelerated [tex]0.0876\text{m/s}^2 \cdot 20.76\text{s} \approx 1.82 \text{m/s}[/tex].
So, average velocity will be 1.82 m/s over the time interval 18.6s to 22.92s.
If f(x) = 2x - 8 and g(x) = x4, what is (g°f)(5)?
080
Clear all
Enter the correct answer.
I
+00
DONE
6 of 15
Exit
The correct answer is 16.
The conventional way to express function is F(x).
You may alternatively describe it as a machine that has input, output, and some other ways they are connected.
You must first evaluate the first function in order to get the value of a composite function like this one. We placed the value for x in parentheses first in that equation because f is on the right side.
f (x) = 2x - 8
f (5) = 2 × 5 - 8
f (5) = 10 - 8
f (5) = 2
Once the first portion of a composite function has an answer, we insert that response into the second part. We insert our response (2) into g because it is on the left side.
g(x) = x^4
g(2) = 2^4
g(2) = 16
To learn more about functions refer link:
https://brainly.com/question/12431044
#SPJ9
Determine the upward applied force, in lbf, required to accelerate a 4.5-lb model rocket vertically upward, with an acceleration of 3 g’s. The only other significant force acting on the rocket is gravity, and 1 g 5 32.2 ft/s2.
The upward applied force will be 579.249 lbf.
Mass of the rocket, m = 4.5 lb
Acceleration, a = 3g
as we know g = 32.2 ft/s²
therefore acceleration, a = 3 * 32.174 = 96.522 ft/s²
According to the Newton's second law of motion, which states that the magnitude of the force acting on an object is equal to the product of the object's mass and the acceleration with which it is moving.
Mathematically, it is F = [tex]\frac{mass}{acceleration}[/tex] ;
Upward force (F₀) for the rocket will be the sum of Force applied by the weight (Fₓ) and the force by the acceleration(Fₐ).
i.e. gₙ *F₀ = Fₓ + Fₐ
Fₓ = mg
Fₐ = ma
F₀ = ma + mg
F₀ = m (a + g)
F₀ = 4.5 (96.522 + 32.2)
F₀ = 4.5 * 128.722
F₀ = 579.249 lbf.
The upward applied force, required to accelerate a 4.5-lb model rocket vertically upward will be 579.249 lbf.
To know more about Newton's second law of motion,
https://brainly.com/question/14595597
#SPJ1
An engineer in a locomotive Sees a car stuck
on the track at a railroad crossing in front of
the train. When the engineer first sees the
car, the locomotive is 190 m from the crossing
and its spood is 18 m/s.
If the engineer's reaction time is 0.54 m.
what should be the magnitude of the mini-
mum deceleration to avoid an accident?
Answer in units of m/s
The magnitude of the minimum deceleration needed to avoid the accident is –0.89 m/s²
The solution of the question can be obtained by first approaching the relation between Speed, Distance and Time which is given by:
Speed = Distance/Time
Now according to question;
Speed = 18 m/s
Time = 0.54 s
Therefore, Distance = Speed×Time
Distance = 18 × 0.54
Distance = 9.72 m
Thus, the engineer travelled a distance of 9.72 m during the reaction time.
Now, there is a need to find distance between the engineer and the car. This can be obtained by:
Distance between the engineer and the car = Total distance - Distance during the reaction time
Distance between the engineer and the car = 190 – 9.72
Distance between the engineer and the car = 180.28 m
Finally, we need to determine the magnitude of the deceleration needed to avoid the accident. This can be obtained by using newton's third equation of motion, which is represented as:
v² = u² + 2as; where u is the initial velocity, v is the final velocity, a is the acceleration/deceleration and S is the distance.
According to the question;
Initial velocity (u) = 18 m/s
Final velocity (v) = 0 m/s
Distance (s) = 180.28 m
Deceleration (a) =?
Thus, using Newton's third equation of motion
0² = 18² + (2 × a × 180.28)
0 = 324 + 360.56a
=> –324 = 360.56a
=> a = –324 / 360.56
=> a = –0.89 m/s²
Therefore, the magnitude of the deceleration needed to avoid the accident is –0.89 m/s.
Learn more about Deceleration at:
brainly.com/question/13218365
#SPJ4
WILL GIVE BRAINLIEST!!!!!!!
why would astronomers make the planets line up in a straight line on a model?
ou throw a rock from the upper edge of a 87.0 m vertical dam with a speed of 21.0 m/s at 58.0∘ above the horizon. Neglect any effects due to air resistance. How much time 1 after throwing the rock will it return to its initial height?
You throw a rock from the upper edge of a 75.0 -m vertical dam with a speed of 25.0 m/s at 65.0∘ above the horizon.
What is horizon?The horizon is the line that, when seen from a position on or near the surface of a celestial body, appears to separate the surface from the sky of that body. All viewing directions are split according to whether it crosses the surface of the relevant body or not.
Since the true horizon is an imaginary line, it can only be seen with any degree of accuracy when it is situated along a generally flat surface, such as the oceans of the Earth. On Earth, the geography may also cause biological objects like trees and/or man-made objects like buildings to obstruct this line in some locations. The location where these obstructions overlap the sky is known as the visible horizon.
To learn more about horizon from the given link;
https://brainly.com/question/26241814
#SPJ4
Two ropes are attached to a heavy object. The ropes are given to two strong physics students (is there any other kind?) with instructions for each to pull with 1000 N of force. Determine the resultant force if the two students pull: a) in the same direction east.
A model shows that the moon has grown to twice its size yet has remained in the same place and one or two sentences explain how this would impact the gravity between earth and the moon?
The attractive force of Earth on the moon will be said to be double when there is a doubling of the mass of the moon.
Since the moon has an attracting force, it is one that will remain the same on Earth. In gravitational forces, the two concerned objects always feel the same force.
What would occur to the gravitational pull between Earth and moon if the moon were twice as large?The explanation of how this would affect the gravity between earth and the moon is that this can result to the earth tilt a little bit harder to change, which could imply that there will be a more stable climate and ice ages may not occur as often.
Therefore, The attractive force of Earth on the moon will be said to be double when there is a doubling of the mass of the moon. Since the moon has an attracting force, it is one that will remain the same on Earth. In gravitational forces, the two concerned objects always feel the same force.
Learn more about gravity from
https://brainly.com/question/28660865
#SPJ1
You drop a 20 Ton object and a
10 Ton object at the same time.
How does the acceleration
compare through the fall
assuming minimal air resistance.
Explanation:
it dosent depend on the weights of the items. I'll reach the ground at same time taking as no air friction or restrictions.
i.e
v = u + gt
whte v is final velocity of the object
u is initial velocity of the object
g is acceleration due to gravity and
t is time. thanks
please if found helpful rate brainliest
Assuming there is little air resistance, the acceleration felt by both objects when one drops a 20-ton object and a 10-ton object at the same time will be the same.
Even though both objects accelerate at the same rate, the forces acting on them will be different because of their different masses. Newton's second law of motion states that an object's force is inversely proportional to its mass (F = ma). The 20-ton object will therefore encounter twice as much force as the 10-ton object, but their rates of acceleration will remain constant.
In conclusion, both the 20-ton and 10-ton objects will accelerate to about 9.8 meters per second squared when dropped simultaneously with little air resistance.
Learn more about acceleration here:
https://brainly.com/question/2303856
#SPJ7
A car traveling 83.0 km/h on a straight road is 1900 m behind a truck traveling at 61.0 km/h . How much time will it take the car to catch up with the truck?
A car traveling 83.0 km/h on a straight road is 1900 m behind a truck traveling at 61.0 km/h. The required voltage is 10 Volts.
What is Electric Current ?Electric current is defined as the rate at which charge passes a fixed unit cross sectional area.
What is Voltage ?Voltage is defined as the physical quantity required to move charge from one end to other.
What is Resistance ?Resistance is defined as the the factor which opposed the electric current.
It states that voltage is directly proportional to electric current
V=IR
Given:
current (I) = 0.1 A
resistance (R) = 100 Ω
Now from definition of voltage we have:
V = I × R
V = 100 × 0.1
V = 10 volts
Thus from the above conclusion we can say that therefore the required voltage is 10 volts.
Learn more about Voltage here:
https://brainly.com/question/1249935
#SPJ9
An astronaut has left the space shuttle on a tether to test a new personal maneuvering device. She moves
along a straight line directly away from the shuttle. Her onboard partner measures her velocity before and
after certain maneuvers, and obtains the following results:
A. VL = 0.8 m/s,
B. U 1.6 m/s,
C. U = -0.4 m/s,
U2x = 1.2 m/s; (speeding up)
U2x = 1.2 m/s; (slowing down)
v₂x = -1.0 m/s; (speeding up)
D. U-1.6 m/s,. U2x = -0.8 m/s. (slowing down)
If t₁ = 2 s and t₂ = 4s in each case, find the average acceleration for each set of data.
(a) The acceleration is 0.2 m /s²
(b) The acceleration is - 0.2 m /s²
(c) The acceleration is - 0.3 m /s²
(d) The acceleration is 0.4 m /s²
Acceleration is outlined as The rate of amendment of rate with relevancy time.Acceleration could be a vector amount because it has each magnitude and direction. it's additionally the second by-product of position with relevancy time or it's the primary by-product of rate with relevancy time which is given by a = v₂ₓ - v₁ₓ / t₂ - t₁ .......(1) equation (1)(a) Putting v₁ₓ = 0.8 m/s , v₂ₓ = 1.2 m/s , t₁ = 2 s and t₂ = 4s in equation (1)
, we get a = 1.2 - 0.8 / 4 -2
a = 0.4 / 2
a = 0.2 m /s²
(b) Putting v₁ₓ = 1.6 m/s, v₂ₓ = 1.2 m/s , t₁ = 2 s and t₂ = 4s in equation (1) , we get a = 1.2 - 1.6 / 4 -2
a = - 0.4 / 2
a = - 0.2 m /s²
(c) Putting v₁ₓ = - 0.4 m/s, v₂ₓ = - 1.0 m/s, t₁ = 2 s and t₂ = 4s in equation (1) , we get a = -1.0 - (-0.4) / 4 -2
a = - 0.6 / 2
a = - 0.3 m /s²
(d) Putting v₁ₓ = -1.6 m/s, v₂ₓ = -0.8 m/s, t₁ = 2 s and t₂ = 4s in equation (1) , we get a = -0.8 - (-1.6) / 4 -2
a = 0.8 / 2
a = 0.4 m /s²
The traveller races in cases (a) and (c) and slows down in (b) and (d), however the common acceleration is positive in (a) and (d) and negative in (b) and (c). In alternative words, negative acceleration doesn't essentially indicate a deceleration down.
Learn more about accerelation here :
https://brainly.com/question/14344386
#SPJ9
The complete question is given below :
An astronaut has left the space shuttle on a tether to test a new personal maneuvering device. She moves along a straight line directly away from the shuttle. Her onboard partner measures her velocity before and after certain maneuvers, and obtains the following results:
(a) v₁ₓ = 0.8 m/s, v₂ₓ = 1.2 m/s; (speeding up)
(b)v₁ₓ = 1.6 m/s, v₂ₓ = 1.2 m/s; (slowing down)
(c) v₁ₓ = - 0.4 m/s, v₂ₓ = - 1.0 m/s; (speeding up)
(d) v₁ₓ = -1.6 m/s, v₂ₓ = -0.8 m/s; (slowing down)
If t₁ = 2 s and t₂ = 4s in each case, find the average acceleration for each set of data.
A bowling ball results in ______ friction compared to a sliding bowling ball.
A bowling ball results in kinetic friction compared to a sliding bowling ball.
What is the Conservation of momentum?According to Conservation of momentum, if a bowling ball hits some pins, the momentum that lost by the bowling ball is known to be equal to the momentum obtained by the pins.
The friction that is used in bowling is kinetic friction because the more oil that is placed down, the lower the friction that is found between the ball and that of the lane surface. The little friction, the stronger it is for the bowler to be able to send the ball in a curved path and thus the formula to find the kinetic friction is know to be : µk=F k/mg.
Therefore, A bowling ball results in kinetic friction compared to a sliding bowling ball.
Learn more about kinetic friction from
https://brainly.com/question/14111192
#SPJ1
Which of the following best describes a position versus time graph foran accelerating object?
Answer: I don't really see the answer choices.
Explanation:
A stone of mass 6.74kg is dropped from rest at a height of 6.02m. What impulse does gravity impart to this stone from the instant is dropped until it hits the ground, assuming negligible air resistance?
The impulse the gravity imparts on the stone from the instant it was dropped until it hits the ground is 72.66 Ns
What is impulse?
This is defined as the change in momentum of an object.
Impulse = change in momentum
Impulse = final moment – Initial momentum
Impulse = force × time
How to determine the timeInitial velocity (u) = 0 m/sAcceleration due to gravity (g) = 9.8 m/s²Height (h) = 6.02 mTime (t) =?h = ½gt²
6.02 = ½ × 9.8 × t²
6.02 = 4.9 × t²
Divide both side by 4.9
t² = 6.02 / 4.9
Take the square root of both side
t = √(6.02 / 4.9)
t = 1.1 s
How to determine the impulseTime (t) = 1.1 sMass (m) = 6.74 kgAcceleration due to gravity (g) = 9.8 m/s²Force (F) = mg = 6.74 × 9.8 = 66.052 NImpulse =?Impulse = Force × time
Impulse = 66.052 × 1.1
Impulse = 72.66 Ns
Learn more about impulse:
https://brainly.com/question/19407716
#SPJ1
a half meter ruler is pivoted at its midpoint and balances whaen a weight of 20N is placed at the 10 cm mark and a weight W is placed at the 45 cm mark on the ruleer. Calculate the weight W
Answer:
35
Explanation:
In this circuit diagram, the resistance is 100 ohms, and the current is 0.1 amperes. The voltage is
The required voltage is 10 Volt for 100 ohms of resistance and 0.1 ampere of current.
electric current is defined as the rate at which charge passes a fixed unit cross sectional area.
voltage is defined as the physical quantity required to move charge from one end to other.
Resistance is defined as the the factor opposing electric current.
Ohms law states that voltage is directly proportional to electric current
V=IR
given:
current (I) = 0.1 A
resistance (R)=100 ohms
now from definition of voltage we have:
V=I.R
V=100×0.1
V=10volts
therefore the required voltage is 10 volts.
learn more about voltage here:
brainly.com/question/12644900
#SPJ9
What is the condition for block b to move downwards
A) mb/ma > sin theta - mew cos theta
B) mb/ma > cos theta + mew sin theta
C) mb/ma > sin theta + mew cos theta
D) mb/ma > cos theta - mew sin theta
And what would the condition for the block to move upwards
A) mb/ma < sin theta - mew cos theta
B) mb/ma < cos theta + mew sin theta
C) mb/ma < sin theta + mew cos theta
D) mb/ma < cos theta - mew sin theta
Answer:
Solution in Photo
Explanation:
To solve this question, draw the Free Body Diagram (FBD) for the whole system such that
theta < 90, it will be more clearer that way.
If a balloon with a weight of 3000 N (306kg) is lifted by an air force of 3300 N, in what will be its acceleration?
Answer:
See below
Explanation:
F = ma net force is 300 N upward
300 = 306 * a a = .980 m/s^2
What kinds of materials can be involved in static electric effects?
All types of materials, both metals and non metals
Only metals but not non-metals
Only non metals but not metals
Only certain metals but not all metals and not non-metals
Only certain metals and certain non-metals
The kinds of materials can be involved in static electric effects is All types of materials, both metals and non metals.
What is static electric effects?The static electric effects can be described as the effect that bring about the changes to the body as a result of the changes in the distribution that is been imposed on the electric charges that is found on the surface of the body.
It should be noted that sufficiently large surface charge density could be discovered as a result of the effect, however in the case above option A is correct.
Learn more about electric effects on:
https://brainly.com/question/11314884
#SPJ1
What is the speed over the ground mosquito flying 2 m/s relative to the ar caught in a 2 m/s right angle crosswind
The speed over the ground is 0 m/s.
The speed of an object or body is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time; it is thus a scalar quantity.
As it is given that the mosquito is flying at 2 m/s relatives to the air caught in a 2 m/s right angle crosswind.
As we know that speed over the ground is the difference between the flight speed and resistance speed.
So, the general equation for the speed over the ground is :
v = Flight Speed of the mosquito - Resistance Speed of the crosswind
This implies, [tex]v= 2 {~}m / s - 2{~} m / s[/tex]
[tex]v = 0 {~}m / s[/tex]
Hence, the speed over the ground is 0 m/s.
Learn more about relative speed / Relative Velocity here:
brainly.com/question/17228388
#SPJ9
What are the reasons Flat Earther's use to prove their claim?
Answer:
The ground we walk on is flat, not round. Gravity doesn't exist. Objects don't fall down, the flat earth(disk) goes up with a force called dark energy. There is a 45 ft tall ice wall to prevent people from falling off the Earth.
Explanation:
2. Link walks 5 miles east, then 7 miles north, than 2 miles south.
a) What distance did he travel? What is his displacement?
b) Suppose Link made the whole journey in 4 hours. What was his average speed and
average velocity during his journey?
Link walks 5 miles east, then 7 miles north then 2 miles south
If you draw a simple diagram you’ll see that your displacement from the start is 5 miles East and 7 miles North and then 2 miles south
These distances are the sides of a right-angled triangle. The displacement you are looking for is the hypotenuse of the triangle. Use the Pythagorean theorem to calculate it.
Displacement
= √ (5+2)^2 + 7^2)
= 9.899 miles
Distance
= 5+7+2
= 14 miles
Time to complete his whole journey = 4 hours
Average Speed= Distance travelled / Time
= 14÷4
= 3.5 miles/hour
Average velocity= Displacement / Time
= 9.899÷4
= 2.47475 miles/hour
The distance is 14 miles and the displacement is 9.899 miles, the Average Speed is 3.5 miles/hour and the Average Velocity is 2.47475 miles/hour
Learn more about Speed, Distance and Time here
https://brainly.ph/question/13274784
#SPJ9
During weather that may produce freezing temperatures, Florida orange growers often spray water on their orchards to protect them. Which of the following best explains why this helps protect orange trees and fruit from freezing?
The statement that best explains why this helps protect orange trees and fruit from freezing is that the transfer of thermal energy in water as it freezes protects the orange trees by transferring heat energy from the orange trees and fruit. That is option A.
What is freezing?Freezing is the phase transition that involves the change of a liquid substance into a solid form as it's temperature becomes lower.
During winter seasons which is a weather that can freez the orange fruits, the orange grower sprays water on their orange trees to prevent it from freezing.
The mechanism that prevents the orange from freezing is the transfer of the thermal energy between the water and the orange fruits.
Learn more about thermal energy here:
https://brainly.com/question/19666326
#SPJ1
please help look the pictures
The angular momentum can be indicated by formula mvr. The correct option is A.
What is angular momentum?The property of any rotating object given by moment of inertia times angular velocity is defined as angular momentum.
It is the property of a rotating body determined by the product of the rotating object's moment of inertia and angular velocity.
The rotational equivalent of linear momentum is the angular momentum formula. Both concepts are concerned with the rate at which anything moves.
It can be represented by symbol L.
L = mvr.
Thus, the correct option is A.
For more details regarding angular momentum, visit:
https://brainly.com/question/15104254
#SPJ1
How large is a neutrino?
1 picometer
1 gigameter
1 yoctometer
1 nanometer
PLEASE help me with this problem??!!
Giving Brainliest!
Temperature is a vector quantity because it can go down as well as up. True or false?
Answer:
Explanation:
temperature is a scalar quantity
2. A radiographic technique calls for a 400 mA, 1/30s exposure. What is
the mAs?
Answer:
13.33 mA s
Explanation:
400 mA * 1/30 s = 13.33 mA s
What can develop when the temperature of the ocean is 80°F. A. Tornado B. Tsunami C. Thunder Storm D. Hurricane
When the temperature of the ocean is 80°F what is likely to develop is Hurricane. That is option D.
What is Hurricane?Hurricane is a natural disaster that occurs over the tropical large water bodie such as the oceans which is characterized by low-pressure storm.
The factors that can cause the occurrence of hurricane include the following;
Increase in Ocean temperature: waters above 80 degrees Fahrenheit provide energy for a hurricane to form.Water movement: spinning in low-pressure areas of water creates a wave.Low wind shear : low wind shear allows a storm to grow large and strong.Therefore, when the temperature of the ocean is 80°F what is likely to develop is Hurricane.
Learn more about temperature here:
https://brainly.com/question/24746268
#SPJ1
Answer: thunderstorm
Explanation:
When the sea surface is at least 80° Fahrenheit (27° Celsius), it can supercharge a thunderstorm. The storm sucks up that heat and water, which make the storm bigger. As it grows, air pressure at the center of the storm continues to drop, which causes the vacuum in the middle to grow stronger.
A fugitive tries to hop on a freight train traveling at a constant speed of 5.2 m/s. Just as an empty box car passes him,the fugitive starts from rest and accelerates at a =1.2 m/s^2 to his maximum speed of 5.8 m/s, which he then maintains. How long does it take him to catch up to the empty box car?
It will take the fugitive 4.83 s to catch the empty box car
What is acceleration?This is defined as the rate of change of velocity which time. It is expressed as
a = (v – u) / t
Where
a is the acceleration v is the final velocity u is the initial velocity t is the time How to determine the timeThe time taken for the fugitive to catch the car if he maintains his maximum speed can be obtained as follow:
Initial velocity (u) = 0 m/sAcceleration (a) = 1.2 m/s² Final velocity (v) = 5.8 m/sTime (t) =?a = (v – u) / t
Thus,
t = (v – u) / a
t = (5.8 – 0) / 1.2
t = 5.8 / 1.2
t = 4.83 s
Learn more about acceleration:
https://brainly.com/question/491732
#SPJ1