Answer:
The final temperature of the mixture is 44.9°C
Explanation:
Mass of the substance (gold) = 2.575g
Specific heat capacity of gold = 0.129J/g°C
Initial temperature (T1) = 75°C
Final temperature (T2) = ?
Energy lost = 10J
Heat energy(Q) = MC∇T
Q = heat energy (in this case lost)
M = mass of the substance
C = specific heat capacity of the substance
∇T = change in temperature of the substance = (T2 - T1)
Q = MC∇T
Q = MC(T2 - T1)
-10 = 2.575 × 0.129 × (T2 - 75) energy is -ve because it was energy lost.
-10 = 0.3321 × (T2 - 75)
-10 = 0.3321T2 - 24.9075
Collect like terms
0.3321T2 = 24.9075 - 10
0.3321T2 = 14.9075
T2 = 14.9075 / 0.3321
T2 = 44.88
T2 = 44.9°C
The final temperature of the mixture is 44.9°C
which of the following causes tornadoes?
Answer:
Tornadoes form when warm, humid air collides with cold, dry air.
Explanation:
The denser cold air is pushed over the warm air, usually producing thunderstorms. The warm air rises through the colder air, causing an updraft. The updraft will begin to rotate if winds vary sharply in speed or direction.
// have a great day //
Answer:
your question says of the following but their isn't any of the following ):
Explanation:
But other than than that person right up above
Balance the equation.
SiO2 +
CaC2 →
Si +
CaO +
CO2
Answer:
5SiO[tex]_{2}[/tex] + 2CaC[tex]_{2}[/tex] → 5Si + 2CaO + 4CO[tex]_{2}[/tex]
5 2 5 2 4 are your answers.
Write Fe salts (divalent Fe)?
Pleasee help.... I will mark the answer with brainlist.
Answer:
Graphitic carbon nitride (g-C3N4) is a rising two-dimensional material possessing intrinsic semiconducting property with unique geometric configuration featuring superimposed heterocyclic sp2 carbon and nitrogen network, nonplanar layer chain structure, and alternating buckling. The inherent porous structure of heptazine-based g-C3N4 features electron-rich sp2 nitrogen, which can be exploited as a stable transition metal coordination site. Multiple metal-functionalized g-C3N4 systems have been reported for versatile applications, but local coordination as well as its electronic structure variation upon incoming metal species is not well understood. Here we present detailed bond coordination of divalent iron (Fe2+) through micropore sites of graphitic carbon nitride and provide both experimental and computational evidence supporting the aforementioned proposition.
What is the mole ratio between NH3 and H2O in the following reaction:
4NH3(g)+ 6NO(g)----->5N2(g) +6H2O(l)
Answer:
1 mole of nitrogen (N2) reacts with 3 moles of hydrogen (H2) to form 2 moles of ammonia (NH3) ... 4 NH3 (g) + 5 O2 (g) --> 4 NO (g) + 6 H2O (g) ... Example: What is the molar ratio between Li and N2 in the following reaction
Explanation:
1 mole of nitrogen (N2) reacts with 3 moles of hydrogen (H2) to form 2 moles of ammonia (NH3) ... 4 NH3 (g) + 5 O2 (g) --> 4 NO (g) + 6 H2O (g) ... Example: What is the molar ratio between Li and N2 in the following reaction
to well
Which of the
of the following is a way to use
water economically
a construction of bewris
b Rainwater harvesting
c Drup irrigation
d Infitration
Answer:
c Drup irrigation
Explanation:
Hope it helps you.
Plz mark as brainliest plz.
Which of the following is not sublimable? * 1 point Dry ice Calcium chloride Ammonium chloride
fasttttt
Answer:
Calcium chloride
Explanation:
Sublimation is the process whereby a solid substance is converted to gas when heat is applied or when exposed to an environment with a higher temperature.
Solid normally gets converted to the liquid phase before reaching the gaseous phase but these substances gets converted from solid straight to gas
Solid—> Gas
Dry ice( solid CO2) and Ammonium chloride undergo sublimation while Calcium chloride doesn't.
an 80kg skateboard moving at 3m/s pushes off with her back foot to move faster. If her velocity increases to 5 m/s, what is her change in kinetic energy as a result
The compound represented by this formula can be classified as an
Answer:
It depends what formula you are talking about.
Explanation:
please further explain so I can be sure.
How did Robert Whitaker change dassification?
Answer:
created an organizational hierarchy
Explanation:
What is h2OO??????????
Which of the following statements are true? Significant figures in a measurement are all measured digits, and one estimated digit None of the above Significant figures communicate the level of precision in measurements Significant figures are an indicator of the certainty in measurements
Answer: Significant figures in a measurement are all measured digits, and one estimated digit
Significant figures communicate the level of precision in measurements Significant figures are an indicator of the certainty in measurements.
Explanation:
Significant figures : The figures in a number which express the value or the magnitude of a quantity to a specific degree of accuracy or precision is known as significant digits.
The significant figures of a measured quantity are defined as all the digits known with certainty and the first uncertain or estimated digit.
Rules for significant figures:
1. Digits from 1 to 9 are always significant and have infinite number of significant figures.
2. All non-zero numbers are always significant.
3. All zero’s between integers are always significant.
4. All zero’s preceding the first integers are never significant.
5. All zero’s after the decimal point are always significant.
The true statements are
Significant figures in measurement are all measured digits, and one estimated digit
Significant figures communicate the level of precision in measurements Significant figures are an indicator of the certainty in measurements.
The following information should be considered:
The figures in a number that express the value or the magnitude of a quantity is known as significant digits.The significant figures of a measured quantity refers to all the digits known with certainty.Learn more: https://brainly.com/question/1979431?referrer=searchResults
In which state of matter does heat travel fastest and slowest?
Answer:
Heat travels faster in solids.
Heat travels slower in gases.
Explanation:
The state of matter in which heat travels in fastest way is solid and in gaseous state heat travels in slowest way.
What is heat transfer?Heat transfer is a process in which heat can travel from one body to another body or from high temperature to low temperature.
In solid state heat will travel in the fastest way because molecules are arranged very close to each other and heat will travel through conduction process. And in gaseous state heat will travel with slowest way as molecules are arranged in very distance.
Hence in solid, heat travels in fastest way and in gases heat travels in slowest way.
To know more about heat conduction, visit the below link:
https://brainly.com/question/1121702
The lifting force on an airplane's wing does which of the following?
O A. Increases gravity
O B. Increases with speed
O C. Decreases with speed
D. Overcomes drag
The lifting force on an airplane's wing Increases with speed.
What is lifting force?The lifting pressure, lifting force, or virtually lift is the sum of all of the forces on a body that forces it to transport perpendicular to the route of flow.
Drag and Thrust are all “mechanical forces.” A mechanical force is generated through the interplay between an item and a fluid (liquid or gas). Weight is a “field force.” A subject's pressure no longer has to be in physical contact with the item to have an impact on the object.
The lift equation states that carry L is identical to the carry coefficient Cl times the density r times half of the velocity V squared instances the wing region A. For given air conditions, form, and inclination of the item, we have to decide a value for Cl to determine the raise.
Learn more about lifting force here:-https://brainly.com/question/2538403
#SPJ2
Given the formula representing a compound: What is the IUPAC name of this compound?
Answer:
2,2- dichloro-heptane
Explanation:
The IUPAC name of the compound is 2,2-dichloro-heptane
What is sodium bicarbonate an example of? a buffer an acid a liquid a base
Answer:
base
Explanation:
carbonic acid - H2CO3 - is a weak acid. Therefore, HCO3 itself is its conjugate base. The Na(sodium) ion is neutral.
This means that NaHCO3 is a base. (a weak one)
HELP!!!!!!!!!!!!!!!! PRETTY PLEASE !!!!!!!!!!!!!!!!
Answer:
B. 75.0 kPa
Explanation:
P1V1/T1=P2V2/T2
(x * 100 L)/(300 K)=(100 kPa * 50.0 L)/(200 K)
x=75.0 kPa
Answer:
24rq3r54
Explanation:
3t5q6tq6tq
Which of the following elements have the same number of valence electrons?
I. Nitrogen (N)
II. Oxygen (O)
III. Fluorine (F)
IV. Sulfur (S)
V. Selenium (Se)
Which if the following matters occupies more space, assuming similar number of molecules? A.(Solid) B.(Liquid) C.(Gas) D. (Solid and gas)
Can a compound have more than one carbon-carbon double bond in it?
Answer:
yes, a compound can have more than one carbon-carbon double bond
Four landing sites are proposed for a lander. Data about the
sites are listed in the table.
At which landing site would the lander have the greatest
amount of gravitational potential energy?
Landing Site
w
W
х
Y
Z
Height above
Surface (m)
32
16
35
Acceleration Due to
Gravity (m/s)
1.6
3.7
1.6
3.7
ОХ
OY
12
N
Answer:
The site at which the lander would have the greatest amount of gravitational potential energy is X
Explanation:
The formula for gravitational potential is given as follows;
[tex]PE_G = m \times g \times \Delta H[/tex]
Where:
g = Acceleration due to gravity
m = Mass of the lander
ΔH = Height above surface
Landing site --- Height above surface --- Acceleration due to gravity
W 32 1.6
x 16 3.7
Y 35 1.6
Z 12 3.7
Therefore, we have;
For site W
[tex]PE_G = m \times 1.6 \times 32 = 51.2 \cdot m[/tex]
For site X
[tex]PE_G = m \times 3.7 \times 16= 59.2 \cdot m[/tex]
For site Y
[tex]PE_G = m \times 1.6 \times 35 = 56 \cdot m[/tex]
For site Z
[tex]PE_G = m \times 3.7 \times 12 = 44.4 \cdot m[/tex]
Hence the site at which the lander would have the greatest amount of gravitational potential energy is X with [tex]PE_G[/tex] = 59.2·m.
Gravitational energy is the power stored in an object due to the intensity of gravity or because the article is located vertically.
The correct answer is:
The site at which the lander would have the greatest amount of gravitational potential energy is X.
The correct explanation for site X is:
The gravitational energy can be calculated as the product of mass, gravitational field and height.
[tex]{\text{PE}_{\text G}&= \text{m}\; \times\text g\times \Delta\text H[/tex]
Where,
g = acceleration due to gravitym = mass
h = height
Given,
Landing site Height above surface Gravity
W 32 1.6
X 16 3.7
Y 35 1.6
Z 12 3.7
We can calculate Gravitational energy for all the sites as follows:
Site W:[tex]{\text{PE}_{\text G}&= \text{m}\; \times\ 1.6\times 32 = 51.2 \text \; \times \text {m}[/tex]
Site X:[tex]{\text{PE}_{\text G}&= \text{m}\; \times\ 3.7\times 16 = 59.2 \text \; \times \text {m}[/tex]
Site Y:[tex]{\text{PE}_{\text G}&= \text{m}\; \times\ 1.6\times 35 = 56 \text \; \times \text {m}[/tex]
Site Z:[tex]{\text{PE}_{\text G}&= \text{m}\; \times\ 3.7 \times 12= 44.4 \text \; \times \text {m}[/tex]
Therefore, the greatest amount of gravitational energy 59.2m is present on-site X.
To learn more about gravitational potential energy follow the given link:
https://brainly.com/question/19768887
Balance the reaction. A coefficient of "1" is understood. Choose option "blank" for the correct answer if the coefficient is "1." 2AgNO₃ + MgCl₂ 2AgCl + Mg(NO₃)₂
Answer:
The balanced equation is: 2AgNO₃ + MgCl₂ ------> 2AgCl + Mg(NO₃)₂
Explanation:
The law of conservation of mass states that in a normal chemical reaction, matter is neither created nor destroyed.
According to the law of conservation of mass, therefore, when a chemical reaction occurs, the mass of the products should be equal to the mass of the reactants. This implies that the amount of the atoms in each element in the chemical reaction remains the same before and after the reaction. A balanced chemical equation therefore, is one that shows that the number of the atoms involved in the reactants side is equal to the number of atoms in the products side.
Considering the given reaction:
2AgNO₃ + MgCl₂ ------> 2AgCl + Mg(NO₃)₂
The amount in moles of each atom in the reaction is as follows;
Ag = 2 moles of atom on each side
N = 2 moles of atoms on each side
O = 6 moles of atoms on each side
Mg = 1 mole of atoms on each side
Cl = 2 moles of atoms on each side
Therefore, the above chemical equation is balanced.
Answer:
The equation is already balanced.
Explanation:
PLSSS HELPPP MEEE WITH THIS QUESTIONNNNN NO GUESSING PLSSSS
Which process is shown in the plant cell below?
A= cell growth
B= cell reproduction
C= metamorphosis
D= photosynthesis
Answer:
B
Explanation:
Well, the cells are going through mitosis, which means that when the divide, they are going to be identical sister cells. Anyways, they are
-pls help will mark brainliest-
Answer:
Explanation: d
Formamide decomposes at high temperature. If 0.186 mol of formamide (HCONH2) dissociates in a 2.16 L flask at 400 K, what are the concentrations of all species present at equilibrium at 400 K? (hint: calculate concentrations first) (b) What is the total pressure in the container at equilibrium?
Answer:
a) [COHNH₂] = 0.001 mol/L, [NH₃] = [CO] = 0.085 mol/L
b) 5.59 atm
Explanation:
a) The decomposition reaction of formamide is the following:
COHNH₂(d) ⇆ NH₃(g) + CO(g)
The equilibrium constant of the reaction above is:
[tex]K_{c} = \frac{[NH_{3}][CO]}{[COHNH_{2}]} = 4.84 (400 K)[/tex]
The initial concentration of formamide is:
[tex] C_{COHNH_{2}} = \frac{\eta}{V} = \frac{0.186 moles}{2.16 L} = 0.086 mol/L [/tex]
Where: η is the number of moles and V is the volume
Now, in the equilibrium the concentration of all species is:
COHNH₂(d) ⇆ NH₃(g) + CO(g)
0.086 - x x x
[tex] K_{c} = \frac{[NH_{3}][CO]}{[COHNH_{2}]} = \frac{x*x}{0.086 - x} [/tex]
[tex] 4.84*(0.086 - x) -x^{2} = 0 [/tex]
By solving the above equation for x we have:
x = 0.085 mol/L = [NH₃] = [CO]
[COHNH₂] = 0.086 - 0.085 = 0.001 mol/L
Therefore, the concentrations of all species present at equilibrium at 400 K is [NH₃] = [CO] = 0.085 mol/L and [COHNH₂] = 0.001 mol/L.
b) To find the total pressure in the container we need to find first the constant Kp as follows:
[tex] K_{p} = K_{c}*RT^{\Delta n} [/tex]
Where R is the gas constant = 0.082 Latm/(Kmol), T is the temperature = 400 K and Δn = 1
[tex] K_{p} = K_{c}*RT^{\Delta n} = 4.84*(0.082*400)^{1} = 158.8 [/tex]
Now, the total pressure is:
[tex] p_{T} = p_{COHNH_{2}} + p_{NH_{3}} + p_{CO} [/tex]
The pressure of COHNH₂ can be found using Ideal Gas Law:
[tex] P = \frac{nRT}{V} = \frac{0.186 moles*0.082 L*atm/(K*mol)*400 K}{2.16 L} = 2.82 atm [/tex]
Using the equilibrium constant we can find the pressure of NH₃ and CO:
COHNH₂(d) ⇆ NH₃(g) + CO(g)
2.82 - x x x
[tex] K_{p} = \frac{P_{NH_{3}}*P_{CO}}{P_{COHNH_{2}}} [/tex]
[tex] 158.8*(2.82 - x) - x^{2} = 0 [/tex]
By solving the above equation for x we have:
[tex] x = P_{NH_{3}} = P_{CO} = 2.77 atm [/tex]
[tex] P_{COHNH_{2}} = 2.82 - 2.77 = 0.05 atm [/tex]
Thus, the total pressure is:
[tex] p_{T} = p_{COHNH_{2}} + p_{NH_{3}} + p_{CO} = (0.05 + 2.77 + 2.77) atm = 5.59 atm [/tex]
Hence, the total pressure in the container at equilibrium is 5.59 atm.
I hope it helps you!
Can something be an acid and a base? Why and why not
Tyler measured the force of his grip. Which is the most likely reading?
A.
190kg
B.
190N
C.
1 lb
D.
20,000 N
E.
5 seconds
F.
18mg
Answer:
190n
Explanation:
190 190 and because it is easy to understand if you didn't understand my answer ask any man
where are people mostly exposed to chemicals?
Answer:
people are mostly exposed to chemicals through their nose, mouth, eyes, and ears
Explanation:
they are the easiest way for anything, bad or good, to enter the body because people touch their face alot.
This might not answer what you were looking for but the other answer covered it pretty well so I thought I'd give you another angle to the question!
Hope this helps!!
During chemical reactions the bonds between atoms break and new bonds form.
Energy must be absorbed to break a bond, so breaking bonds is endothermic.
Making new bonds is exothermic because energy is released.
a) When green copper carbonate decomposes, the equation is:
CuCO3 CuO CO2
copper carbonate copper oxide carbon dioxide
Is the reaction exothermic or endothermic? Use ideas about bonds to explain why.
Answer:
The equation is CuCO₃ ⇆ CuO + CO₂. So it's a decomposition reaction, so a solid broke down into two other substances. This means that bonds were broken, so the reaction must be endothermic.
Can the pH scale be utilized for all acids (Arrhenius, Bronsted-Lowry, and Lewis)? Give examples of substances from each definition category that can/cannot use the pH scale and explain your reasoning.
PLEASE ANSWER
Answer:
No
Explanation:
The pH scale is a scale graduated from 0-14 which shows the degree of acidity of alkalinity of a substance. The pH scale is graduated in such a way that 0-6.9 indicates acidity, 7.0 indicate a neutral substance, while a pH of 8-14 indicates alkalinity respectively.
There are three main definitions of acids/bases
- Arrhenius definition
-Brownstead-Lowry definition
-Lewis definition
Arrhenius explains acids as any substance that produces hydrogen ions as its only positive ion in solution while a base produces hydroxide ions as its only negative ion in solution. The pH scale is based on corresponding values of pH derived from aqueous solutions of these substances.
However, not all acids/bases produces hydrogen or hydroxide ions in solution. Brownstead-Lowry definition of acids and Lewis definition of acids could be extended to nonaqueous media where the pH can not be measured as there are no hydrogen or hydroxide ions present in the solution.
This implies that pH measurement may not apply to acids/bases in the all the categories of acids/bases hence it can not be utilized for all acids and bases.
Arrhenius - sodium carbonate
Brownstead-Lowry - concentrated HF
Lewis acid - AlCl3
calculate the ph and poh of a 0.0032 M solution of nitric acid NHO3
Answer:
HNO3 ->NO3²- + H+
Concentration of H+ ions= 0.0032M
pH = - log[ H+]
= - log (0.0032)
= 2.49
pH + pOH = 14
pOH = 14 - pH
= 14 - 2.49
= 11.51
pH = 2.49 and pOH = 11.51
Hope this helps.