Answer:
31.25 meters in a time of 2.5 seconds.
Explanation:
Because your question gives a number that is a multiple of 5, that is just begging for us to set a = -g = -10 m/s^2. This is acceleration due to gravity. Then, we have an equation vf = v0 + at where v0 = 25 m/s. Plugging in the earlier known values and letting vf = 0 (when final velocity is zero there is maximum height), we get t = 2.5 s. Then, Delta y = vot - 1/2 gt^2. This gives 62.5 - 31.25 = 31.25 m.
Thus, our answer is 31.25 meters in a time of 2.5 seconds.
*Note: g is more precisely 9.806 m/s^2, but that would lead to more annoying sig figs in our answer so I chose to round to 10 m/s^2 which is common.
a crude approximation of voice production is to consider the breathing passages and mouth to be a resonating tube closed at one end. what is the fundamental frequency ????1 if the tube is 0.240 m long, by taking air temperature to be 37.0∘c? ????1
The fundamental frequency of the tube is 0.240 m long, by taking air temperature to be [tex]37^o[/tex]C is 367.42 Hz.
A standing wave is basically a superposition of two waves propagating opposite to each other having equal amplitude. This is the propagation in a tube.
The fundamental frequency in the tube is given by
[tex]f=\frac{v_T}{4L}[/tex]
where, [tex]v_T=v\sqrt{\frac{T}{273} }[/tex]
Since, T=37+273 K = 310 K
v = 331 m/s
[tex]\therefore v_T=331\sqrt{\frac{310}{273} } = 352.72 \ m/s[/tex]
Using this, we get:
[tex]f=\frac{352.72}{4(0.240)} \\f=367.42 \ Hz[/tex]
Hence, the fundamental frequency is 367.42 Hz.
To learn more about Attention here:
https://brainly.com/question/14673613
#SPJ4
Something that causes significant personal stress, appears strange to others,
and
is a psychologícal disorder.
O A. is a split from reality
OB. impairs one's ability to function
OC. includes hallucinations
OD. happens across cultures
Answer:
Impairs one's ability to function
Explanation:
Answer:
Impairs one's ability to functionExplanation:
I just took the test
water flows through a 4.0-cm-diameter horizontal pipe at a speed of 1.3 m/s. the pipe then narrows down to a diameter of 2.0 cm.
The pipe's large and narrow sections have different water pressures of "12.78 KPa."
The ideas of Bernoulli's Theorem and the continuity equation are involved in this query. Finding the pressure difference requires substituting the appropriate values.
What is Bernoulli's theorem explain?
Therefore, Bernoulli's theorem states that a drop in fluid pressure is connected with an increase in fluid velocity if the fluid flows horizontally so that there is no change in gravitational potential energy.
Bernoulli's theorem states that as long as an ideal liquid is incompressible, viscous, and flows in a streamline, the total amount of energy it possesses at any given place remains constant. Kinetic, potential, and pressure energy all add up to a constant. P+21pv2+pgh=Constant.
learn more about Bernoulli's Theorem refer
https://brainly.com/question/15396422
#SPJ4
Science: PLEASE HELP DUE IN 5 minutes!
Answer:
It is the process in which animals eat each other in the food chain. From producers (like grass) to the top of the food chain (which depends on the climate and habitat)
Explanation:
PLZ HELP ITS A TIMED TEST!!!!!!!!!!!!!!!!
Which of the following construction tools relies on a lever to reduce the amount of effort needed to complete a task?
Question 12 options:
Image #1 the Crane
Image #2 Crow bar
Image #3 Nail
Long ding dong what it do?
Answer:
nun wbu
Explanation:
Answer:
long very very
I’ll give brainliest if it’s correct ;-;z
Someone help!!!
3 different earthquakes that were measured with broadband seismographs, 3 earthquakes long period, and 3 earthquakes measured with short period instruments.
Explanation:
what is the question? could you pls provide it
A 250 kg cart is at the top of a hill that is 32 m high, what is its potential energy?
Answer:
80,000 JExplanation:
The potential energy of a body can be found by using the formula
PE = mgh
where
m is the mass
h is the height
g is the acceleration due to gravity which is 10 m/s²
From the question we have
PE = 250 × 10 × 32
We have the final answer as
80,000 JHope this helps you
A certain superconducting magnet in the form of a solenoid of length 0.500m can generate a magnetic field of 9.00T in its core when its coils carry a current of 75.0A . Find the number of turns in the solenoid.
The number of turns in the solenoid is [tex]4.78\times 10^4 \ turns[/tex].
Solenoids are essentially coils of cord. These generate a magnetic subject which strives a pressure over a steel element.A solenoid is a fundamental time period for a coil of cord that we use as an electromagnet.We additionally consult with the tool which could convert electric power into mechanical power as a solenoid.Actually it generates a magnetic subject for developing linear movement from the electrical cutting-edge. With using a magnetic subject.Magnetic field at the centre of a solenoid of length 'L' having 'N' number of turns with a current 'I' is given by [tex]B=\frac{u_0NI}{L}[/tex] ...(1) where [tex]u_0[/tex] is the permittivity of free space whose value is [tex]4\pi \times10^{-7}Tm/A[/tex] .It is given that superconducting magnet in the form of a solenoid of length 0.500m can generate a magnetic field of 9.00T in its core when its coils carry a current of 75.0A .
Putting above values in equation (1) , we get
[tex]9.00=\frac{4\pi \times10^{-7}\times N \times75.0}{0.500} \\\\N=\frac{9.00\times0.500}{4\pi \times10^{-7}\times75.0} \\\\N=4.78\times10^4 \ turns[/tex]
Learn about solenoid more here :
brainly.com/question/15218721
#SPJ4
1. If you throw a ball into the air, the Earth's gravity will cause the ball to
Explanation:
fall at a faster velocity than what it was thrown! Hope this helps!
A Scientist was studying cockroach movement through a small passage. The scientist attached sandpaper to the inside surfaces of the passage. Which variable was the scientist most likely trying to investigate?
A. weight
B. friction
C. temperature
D. energy transfer
Answer:
b
Explanation:
the cockroach was rubbing up against something
Which statement compares the attractive forces that hold particles together?
Which component of a galaxy consists of tiny particles that look smoky or cloudy and
can be found in the space between stars?
Cosmic Dust.
Why? When stars explode, or die, they releases dust and gas.
To solve this we must be knowing each and every concept related to galaxy. Therefore, cosmic dust of a galaxy consists of tiny particles that look smoky or cloudy and can be found in the space between stars.
What is galaxy?Galaxies are collections of stars as well as other celestial objects that are gravitationally bound. The cosmos contains and over 100 billion galaxies, each of which has stunning formations seen in photographs captured by telescopes of the far sky.
According to Samuel, a galaxy's shape is the result of continual interactions between its many components. The majority of the mass is provided by the dark matter, which uses gravity to hold everything together. Cosmic dust of a galaxy consists of tiny particles that look smoky or cloudy and can be found in the space between stars.
Therefore, cosmic dust of a galaxy consists of tiny particles that look smoky or cloudy and can be found in the space between stars.
To know more about galaxy, here:
https://brainly.com/question/2516215
#SPJ5
Nuclear fusion requires high temperatures and pressures in order to bring the nuclei close to each other.
This is because all nuclei have a __________ charge. What word completes the sentence?
Answer:
The answer is positive.
Explanation:
In a middle of an atom, nucleus, contain neutrons (neutral charge) and protons (positive charge) so it will become positively charge nucleus.
A student jumps off of a cliff into a river 25.9 m below. If the student landed 20.7 m horizontally away from where they jumped how much time was the student airborne?
PLEASE HELP ME
Which modes of heat transfer require a medium? Which does not? Explain why a medium is/is not
needed for each response.
Answer:
Conduction and convection requires Modes of transfer of heat ! Radiation doesn't require any medium !!
In terms of heat transfer, radiation is the emission of thermal energy in the form of infrared waves. ... Since heat is carried by electromagnetic waves, it does not need a physical medium to transfer it. Instead it radiates through space - this is how the Earth is heated by the Sun despite space being a vacuum
to know more about conduction and convection you can take the help of internet search
Question 7 (2 points)
Which statement accurately describes the charge of the nucleus of an atom? (2 points)
O a The nucleus can be either positively charged or neutral.
Ob
The nucleus never has an electrical charge.
O c
The nucleus always has a positive charge.
Od
The charge of a nucleus can change from positive to negative.
The nucleus of an atom will have a positive charge due to the existence of protons, which are positively charged subatomic particles.
Protons and neutrons are present in an atom's nucleus. We are aware that a proton has a charge of + 1 and a neutron has a charge of 0 (or no charge). As a result, the atom's nucleus will always be positively charged. A nucleus is a name for the dense area in the middle of an atom. Because there are positively charged subatomic particles present, the nucleus usually has a positive charge. The subatomic particles, which are present in atoms but far smaller than atoms, are there. Protons, neutrons, and electrons are the three primary subatomic particles found in matter. An atom's nucleus contains protons and neutrons, while its outermost nucleus contains electrons. Neutrons are subatomic particles with a charge of zero, whereas protons are positively charged.
Therefore, the nucleus of an atom will always have a positive charge. Consequently, an atom's nucleus has a positive charge because of the presence of protons.
Learn more about the Nucleus of an atom here
https://brainly.com/question/3940764
#SPJ9
A 500N car is pulled up to 20m plant to a flat from 5m above the ground by an effort of 150N parallel to the plank what is the VR??who can answer!!!!
Answer:
4Explanation:
VR = Velocity ratio = Distance moved by effort/Distance moved by load
Given:
Distance moved by effort = 20m
Distance moved by Load = 5m
VR = 20/5
VR = 4
Hence the velocity ratio of the car is 4
Two pulses move in opposite directions on a string and are identical in shape except that one has positive displacements of the elements of the string and the other has negative displacements. At the moment the two pulses completely overlap on the string, what happens? (a) The energy associated with the pulses has disappeared. (b) The string is not moving. (c) The string forms a straight line. (d) The pulses have vanished and will not reappear.
(c) When the two pulses completely overlap on the string forms a straight line.
A single disturbance that travels via a transmission medium is referred to as a pulse. This medium might be formed of stuff or a vacuum, and it might be endlessly large or finite in size.
Consider two pulses that are identical in shape and proceed in opposite directions along a string, with the exception that one has positive displacements of the string's elements while the other has negative displacements.
On the string, the two pulses blend together completely.
The pulses completely balance one another out in terms of removing string elements from equilibrium, yet the string still moves. Shortly after the string is once again shifted, the pulses will have passed each other.
The correct option is (c)
Learn more about pulse here:
https://brainly.com/question/14885673
#SPJ4
What does this tell you about the direction and magnitude of the acceleration acting on the cannonball throughout its duration of flight?
Answer:
Direction remains the same but velocity changes.
Explanation:
This tell us about the direction and magnitude of the acceleration acting on the cannonball throughout its duration of flight that its direction remains the same but its magnitude of the acceleration is continuously changing. The cannonball moves in the direction in which the cannon was fired while the velocity is highest after the fire but decreases when goes higher and when it comes back to the ground so its velocity increases against so we can say that both positive and negative acceleration occurs. Positive acceleration means increase in the magnitude of velocity whereas negative acceleration means decrease in velocity.
what vehicle component transfers engine torque to the axles allowing the wheels on the same axle to turn at different speeds
Differentials are the components of a car that transfer engine torque to the axles allowing the wheels on the same axle to turn at different speeds.
There are two differentials in a car. The first one is located on the rare wheels and the second one is located on the front wheels.
The purpose of differentials is to allow the wheels to turn at different speeds required when the car is making a turn. The differentials send the torque from the transmission to the drive wheels.
During the turn, the differentials allow the front and rare wheels to turn at different speeds.
If you need to learn more about the components of a car, click here
https://brainly.com/question/3379105?referrer=searchResults
#SPJ4
which is a possible sequence in the life cycle of a massive star?(1 point) planetary nebula, super red giant, protostar, supernova, star, black hole planetary nebula, super red giant, protostar, supernova, star, black hole nebula, protostar, star, super red giant, supernova, neutron star nebula, protostar, star, super red giant, supernova, neutron star super red giant, protostar, nebula, star, neutron star, supernova super red giant, protostar, nebula, star, neutron star, supernova supernova, star, black hole, planetary nebula, super red giant, protostar
The possible sequence in the life cycle of a massive star is protostar, star, super red giant, planetary nebula, supernova, black hole.
What is supernova?A supernova is the enormous, dazzling explosion of a star. Supernovae or supernovas are the plural forms of its abbreviation, SN or SNe. This brief astronomical event occurs either in the latter stages of the formation of a large star or when a white dwarf is set off into uncontrolled nuclear fusion. The original object, referred to as the progenitor, either falls into a neutron star or a black hole, or entirely disintegrates. Before fading over the course of several weeks or months, the optical luminosity of a supernova can reach a peak that is similar to the luminosity of an entire galaxy. The latest supernova in the Milky Way to be directly observed was Kepler's Supernova in 1604, however more recent supernova remnants have been found.
To learn more about supernova,visit:
https://brainly.com/question/12702138
#SPJ4
What does resistance refer to in a circuit?
Answer:
Resistance is a measure of the opposite to current flow in an electrical circuit. Resistance is measured in ohms.
Hope this helps
Plucking on a tight metal wire causes it to vibrate. What type of energy would that produce?
A. Light
B. Chemical
C. Sound
D. Thermal
Question 2: A burning candle exhibits what types of energy?
A Light and Thermal Energy
B Light Energy only
C Sound and Light Energy
DTheraml Energy only
When you slide a box across the floor what force must you push to be stronger than
A) support force
B) friction force
C) gravity
D) air resistance
Answer:
B) Friction force
Explanation:
if the object is heavy then it will need more force to move it unlike a tennis ball for example.
How fast would a girl who rides her bike at 18 m/s for 15 s. Have been traveling if she had covered the same distance in 10 s?
Answer:
From first equation of motion:
[tex]{ \rm{v = u + at}} \\ { \rm{18 = 0 + (a \times 15)}} \\ { \rm{18 = 15a}} \\ \\ { \boxed{ \rm{ \: a = \frac{18}{15} \: m {s}^{ - 2} }}}[/tex]
For the second case:
[tex]{ \rm{v = u + at}} \\ { \rm{v = 0 + ( \frac{18}{15} \times 10)}} \\ \\ { \rm{v = 12 \: {ms}^{ - 1} }}[/tex]
A spaceship of mass 2.40x10⁶kg is to be accelerated to a speed of 0.700 c. (a) What minimum amount of energy does this acceleration require from the spaceship's fuel, assuming perfect efficiency?
The minimum energy required is 3.02 x 10²³ joule.
We need to know about relativistic energy to solve this problem. The rest energy of the object can be determined by
Eo = m₀ . c²
where Eo is rest energy, m₀ is rest mass and c is the speed of light (3 x 10⁸ m/s).
The total energy of object can be described as
E = Eo / √(1 - v²/c²)
where E is total energy, v is the object speed.
From the question above, we know that :
m₀ = 2.4 x 10⁶ kg
c = 3 x 10⁸ m/s
v = 0.7c
Find the rest energy
Eo = m₀ . c²
Eo = 2.4 x 10⁶ . (3 x 10⁸)²
Eo = 2.16 x 10²³ joule
Determine the total energy
E = Eo / √(1 - v²/c²)
E = 2.16 x 10²³ / √(1 - (0.7c)²/c²)
E = 2.16 x 10²³ / 0.71
E = 3.02 x 10²³ joule
Find more on relativistic energy at: https://brainly.com/question/23920189
#SPJ4
What is the relationship between magnetism and the movement of electrical charges in generators ( the device).
Answer:
Electricity and magnetism are two related phenomena produced by the electromagnetic force. Together, they form electromagnetism. A moving electric charge generates a magnetic field. A magnetic field induces electric charge movement, producing an electric current.
Explanation:
PLEASE HELP MEEE!!!
A car traveling on a straight road at 10 meters per second accelerates uniformly to a speed of 21.0 meters per second in 12.0 seconds. The total distance traveled by the car in this 12.0-second time interval is?
Answer:
185.3m
Explanation:
Given parameters:
Initial velocity = 10m/s
Final velocity = 21m/s
Time = 12s
Unknown:
Total distance traveled by the car = ?
Solution:
To solve this problem, we use that appropriate motion equation:
v² = u² + 2as
v is the final velocity
u is the initial velocity
a is the acceleration
s is the unknown distance
t is the time taken;
acceleration = [tex]\frac{v - u}{t}[/tex]
a = [tex]\frac{21 - 10}{12}[/tex] = 0.92m/s²
now;
v² = u² + 2as
21² = 10² + 2(0.92)(s)
441 = 100 + 1.84s
441 - 100 = 1.84s
s = 185.3m
Every form of matter has two kinds of properties - What are they?
What is the difference between chemical and physical properties?
Why is melting point a physical property?
this is urgent
Answer:
1-physical properties, and chemical properties.
2-The physical properties of matter are those characteristics that can be measured without altering the atomic structure, while the chemical properties of matter are those.
3-For the change of state to occur, the temperature must be constant. The melting point is an intensive physical property of matter; this means that it is not linked to the amount of substance or the size of the body.