Answer:
2000 millimoles of AlCl₃
Explanation:
From the question given above, the following data were obtained:
Volume of solution = 1.8 L
Molarity of solution = 1.1 mol /L
Millmole of AlCl₃ =?
Next, we shall determine the number of mole of AlCl₃ in the solution.
This can be obtained as follow:
Volume of solution = 1.8 L
Molarity of AlCl₃ solution = 1.1 mol /L
Number of mole of AlCl₃ =?
Molarity = mole /Volume
1.1 = Number of mole of AlCl₃ / 1.8
Cross multiply
Number of mole of AlCl₃ = 1.1 × 1.8
Number of mole of AlCl₃ = 1.98 moles
Finally, we shall convert 1.98 moles to millimoles. This can be obtained as follow:
1 mole = 1000 millimoles
Therefore,
1.98 mole = 1.98 mole × 1000 millimoles / 1 mole
1.98 mole = 1980 millimoles
1.98 mole ≈ 2000 millimoles
Thus, the chemist added 2000 millimoles of AlCl₃
This data was collected after conducting an experiment about the amount, in liters, of water a specific plant needs per month. An accepted value for the measurement is 6 liters. These are the collected experimental values.
Which values in the collected data are precise? Check all that apply.
1.1 liters
1.2 liters
1.5 liters
6.0 liters
8.1 liters
Answer:
1.1 liters
1.2 liters
1.5 liters
Explanation:
Precision in data refers to how close the experimental values of an experiment are to one another irrespective of the true or accepted value. In other words, a set of values are said to be PRECISE if they are close to one another.
In this case, data was collected after conducting an experiment about the amount, in liters, of water a specific plant needs per month. However, according to the set of experimental values provided, only 1.1 litres, 1.2litres and 1.5litres are close to one another and, hence, are said to be PRECISE even if they are not close to the accepted value of 6litres.
Answer:
1.1 liters
1.2 liters
1.5 liters
Explanation:hope you do good in edge
Ben observes how quickly some dry wood is burning in a campfire. Which term best relates to Ben’s observation?
Answer:
Reaction rate
Explanation:
We are told that Ben observes how quickly some dry wood is burning in a campfire.
This is an example of reaction rate because it tells us the speed i.e. how fast the dry wood is reacting with the camp fire.
Where does photosynthesis occur in a plant cell, specifically what
organelle?
2 points
Your answer
During the chemical reaction of photosynthesis. Light energy is converted 2 points
into what type of energy?*
Your answer
2 points
Look at this image, which numbers represent the PRODUCTS of
photosynthesis?
Sun's energy
Answer:
1) chloroplast
A chloroplast is an organelle within the cells of plants and certain algae that is the site of photosynthesis, which is the process by which energy from the Sun is converted into chemical energy for growth.
2)Photosynthesis is the process in which light energy is converted to chemical energy in the form of sugars. In a process driven by light energy, glucose molecules (or other sugars) are constructed from water and carbon dioxide, and oxygen is released as a byproduct.
3)i need the photo to answer
Explanation:
PLEASE MARK ME AS BRAINLIEST
A precipitate is a solid that sometimes forms when two liquids combine.
A true
B False
A precipitate is a solid that sometimes forms when two liquids combine.
Answer:A. True
Explanation:Because the Precipitate it's forms solid when two liquids combine to precipitate. #CARRYONLEARNING #STUDYWELLA precipitate is a solid that sometimes forms when two liquids combine.
Choosing:A. True
B. False
Answer:A. True
#READINGHELPSWITHLEARNING #CARRYONLEARNING #STUDYWELLChoose one region on the world map. How does the climate there differ during El Niño and La Niña?
United States
The jet stream is oriented from west to east across the southern portion of the United States, during El Niño. Although El Niño's strongest impacts are felt around the equatorial Pacific, they can affect weather around the world by influencing high and low pressure systems, winds and precipitation. And as the warmer ocean waters release excess energy (heat) into the atmosphere, global temperatures rise.
During La Niña, the jet stream and severe weather are likely to be farther north. It refers to the periodic cooling of sea-surface temperatures across the east-central equatorial Pacific.
El Niño and La Niña result from interaction between the surface of the ocean and the atmosphere in the tropical Pacific. Changes in the ocean impact the atmosphere and climate patterns around the globe. In turn, changes in the atmosphere impact the ocean temperatures and currents.
The region chosen is United States and the southern tier of Alaska and the U.S. Pacific Northwest tends to be warmer than average during El Niño and La Niña.
What is Climate?This is defined as the average weather condition of a place over a given period of time.
The U.S.southern tier of state also tends to be cooler during this period which makes it the most appropriate choice.
Read more about Climate here https://brainly.com/question/17922964
#SPJ2
Newbie Here pls.. HELP me
Answer:
1. Litres
2. minutes
3. Kelvin (K)
4. Kilometer/hour
5. hours
6. Litre
7. metre
8. metre
9. Litres
10. milliliters
Explanation:
1. Coca-Cola is a liquid substance, hence, its volume must be measured in LITRES.
2. This question is related to time I.e. being early, hence, the unit of measurement is MINUTES.
3. The unit of temperature is Kelvin (K). Therefore, water boils at 373K
4. This question is related to speed, whose unit of measurement is kilometer/hour (km/hr).
5. A movie runs with time, which is measured in HOURS.
6. Mineral water is a liquid, which can only be bought per volume. Hence, the appropriate unit is LITRE.
7. Height is measured in metres (m). Therefore, one can say that " the height of your younger brother is 10metres"
8. The length of a substance is also measured in metres.
9. Volume is measured in LITRES
10. Cough syrup is a drug whose volume is quantified by millilitres i.e. a thousandth litre
classify the chemical equation CaCO3 → CaO + CO2
This is displacement reaction.
i hope y’all understand lolz
Answer:
protons are red neutrons are green electrons are yellow
Explanation:
TIE FIGHTERS GO ZOOOOOM
What is the mass of 5 moles of Fe2O?
Explanation:
1 miole of Fe2O is 6.22 × 10^-23
5mole of Fe2O = 5×6.22×10^-23
=31.1×10^-23
Mass of 5 moles of [tex]Fe_2O[/tex] is 636 g.
Formula for the calculation of mass is as follows:-
[tex]Number\ of\ mole=Mass/Molar mass[/tex].......(1)
The molar mass of [tex]Fe_2O[/tex]is [tex]2\times55.6\ g+16\ g=127.2 \g[/tex]
So ,the mass of 5 moles of [tex]Fe_2O[/tex]is as follows:-
[tex]5\ mol=Mass/127.2\ g/mol\\5\ mol/times127.2\ g/mol=Mass\\636\ g=Mass[/tex]
Hence, the mass of 5 moles of [tex]Fe_2O[/tex] is 636 g.
To know more about:-
brainly.com/question/24057836
examples of acidic and basic oxides that can prepared by the thermal decomposition of nitrates and carbonates
Answer:
Explanation:
Silicon, phosphorus, sulphur, and chlorine oxides are acidic
Sodium oxide, which reacts with water to produce sodium hydroxide. Magnesium oxide, which reacts with hydrochloric acid to form magnesium chloride. Copper(II) oxide, which reacts with nitric acid to form copper nitrate are basic.
What element is in 3rd period and the 1st group?
Answer:
That is sodium
Explanation:
Sodium is found there
Solid calcium hydroxide is dissolved in water until the pH of the solution is 10.44. Determine the concentration of the calcium hydroxide in the solution.
Answer:
1.38x10⁻⁴ M
Explanation:
First, we calculate the pOH of the solution, using the given pH:
pOH = 14 - pHpOH = 14 - 10.44pOH = 3.56Now we calculate the concentration of OH⁻, using the pOH:
pOH = -log[OH⁻][OH⁻] = [tex]10^{-pOH}[/tex] = 2.75x10⁻⁴ MFollowing the reaction Ca(OH)₂ → Ca⁺² + 2OH⁻, we divide [OH⁻] by 2 to calculate [Ca(OH)₂]:
[Ca(OH)₂] = 2.75x10⁻⁴ M / 2 [Ca(OH)₂] = 1.38x10⁻⁴ MThe concentration of the calcium hydroxide in the solution is 1.38 * 10⁻⁴ M
pH:pH is calculated using the expression:
[tex]pH = - log [H_3O^+][/tex]
Given:
pH of the solution = 10.44
Calculation of pOH of the solution, using the given pH:[tex]pOH = 14 - pH\\\\pOH = 14 - 10.44\\\\pOH = 3.56[/tex]
Calculation for concentration of OH⁻, using the pOH:[tex]pOH = -log[OH^-]\\\\[OH^-] = 2.75* 10^{-4} M[/tex]
From the reaction:Ca(OH)₂ → Ca⁺² + 2OH⁻
The concentration of OH⁻ is then divided by 2 according to the given reaction.
[tex][Ca(OH)_2] = \frac{2.75*10^{-4}M}{2}\\\\[Ca(OH)_2] = 1.38*10^{-4}M[/tex]
Thus, the concentration of the calcium hydroxide in the solution is 1.38 * 10⁻⁴ M.
Find more information about pH here:
brainly.com/question/13557815
What is the male reproductive part of the plant that produces pollen
Answer:
Stamen
Explanation:
Answer:
stamen
Explanation:
The stamen is the male reproductive organ. It consists of a pollen sac (anther) and a long supporting filament.
NEED HELP ON 7,8,9 PLEASE
Answer:
number 7 is GROWTH
number 8 is TARGET CELLS
number 9 is pituitary gland
In any chemical reaction, the atoms of any substance that you begin with, you must end with follows the ___
Law of Definite Proportions
Law of Conservation of Mass
Rule of Zero
Law of Multiple Reactions
Answer:
IAM at exam sorry that's why I can't answer
Which natural forces can weather and erode rock? Check all that apply.
clouds
ice
heat
water
wind
u don't have to rush but help please
Answer:
The answer would be ice, heat, water, and wind. (Hope this helps).
Answer:
the last four options
ice
heat
water
wind
Explanation:
edg2020
How might you think it is possible to convert from moles to particles or grams to particles?
Explanation:
To convert moles to particles or grams to particles, let us have a firm understanding of what a mole is.
A mole is the unit of measuring quantity of particles.
It is the amount of substance that contains the Avogadro's number of particles.
The particle can be atoms, molecules, formula units, electrons, protons, neutrons, etc.
So, to convert from moles to particles;
1 mole of a substance contains 6.02 x 10²³ particles
To convert from grams to particles;
First convert to moles;
number of moles = [tex]\frac{mass}{molar mass}[/tex]
So, 1 mole of a substance contains 6.02 x 10²³ particles
Please help
What is the formula for pentaboron nonahydride?
An insulated cup contains 66.0g of water at 22.00oC. A 28.50g sample of metal at 95.25oC is added. The final temperature of the water and metal is 27.84oC. What is the specific heat of the metal
Answer:
Specific heat of metal of the metal is 0.8394J/g°C
Explanation:
The heat the water gain is the same losing for the metal. The equation is:
m(Metal)*ΔT(Metal)*S(Metal) = m(Water)*ΔT(Water)*S(Water)
Where m is mass: 66.0g water and 28.5g Metal
ΔT is change in temperature: (95.25°C-27.84°C) = 67.41°C for the metal and (27.84°C - 22.00°C) = 5.84°C for the water
And S is specific heat of water (4.184J/g°C) and the metal
Replacing:
28.5g*67.41°C*S(Metal) = 66.0g*5.84°C*4.184J/g°C
S(Metal) = 0.8394J/g°C
Specific heat of metal of the metal is 0.8394J/g°C
Which of the following elements belong to the same group/family?
A. H and He
B. Li and Be
C. C and Pb
D. Ni and Ra
Answer:
C. C and Pb
Both are in group IV elements.
Heat energy can be transferred from a source to a receiver by
I. radiation.
II. convection.
III. conduction.
A.
I, II, and III
B.
II only
C.
I only
D.
III only
Answer:
It's I, II, and III
Explanation:
Trust me.
A 2-lb sample of an unknown liquid occupies a volume of 62.6 in.3 For the liquid determine (a) the specific volume, in ft3 /lb, and (b) the density, in lb/ft3 .
Answer:
a) 0.018 ft^3
b) 55.55 lb/ft^3
Explanation:
given that mass m = 2 lb
volume = 62.6 in^3
= 0.036 ft^3
now, specific volume = volume/mass [specific volume is the reciprocal of density]
=0.036/2 = 0.018 ft^3.
b) density = mass/ volume = 2/0.036 = 55.55 lb/ft^3
Please help!!! I’ll mark brainlist
Explanation:
they are closer and made of gas
10. Identify the products in the combustion of methane.
(1 Point)
a. CO2 and H20
O b. CH4 and 02
O c. O2 and H20
O d. CH4 and CO2
Answer:
a. CO2 and H20
Explanation:
Chemically, this combustion process consists of a reaction between methane and oxygen in the air. When this reaction takes place, the result is carbon dioxide (CO2), water (H2O), and a great deal of energy. The following reaction represents the combustion of methane:
CH4[g] + 2 O2[g] -> CO2[g] + 2 H2O[g] + energy
One molecule of methane, (the [g] referred to above means it is gaseous form), combined with two oxygen molecules, react to form a carbon dioxide molecule, and two water molecules usually given off as steam or water vapor during the reaction and energy.
The enthalpy of vaporization for water is 40.67 kJ/mol and the enthalpy of fusion for water is
6.01 kJ/mol. What is the enthalpy of deposition?
Answer:
[tex]\Delta H_{dep}=-46.68kJ/mol[/tex]
Explanation:
Hello!
In this case, since vaporization is the processes by which a liquid goes to the gas phase, fusion by which a solid goes to liquid and deposition by which a gas goes to solid; we infer that the following set up relates the enthalpies associated to each process:
[tex]\Delta H_{fus}+\Delta H_{vap}=-\Delta H_{dep}[/tex]
Because deposition goes from a state with more energy to a state with less energy, therefore it is negative; in such a way, by plugging in we obtain:
[tex]\Delta H_{dep}=-(\Delta H_{fus}+\Delta H_{vap})\\\\\Delta H_{dep}=-(6.01kJ/mol+40.67kJ/mol)\\\\\Delta H_{dep}=-46.68kJ/mol[/tex]
Best regards!
What is the ionic equation for the following
2FeCl(aq)
3Mg(s)
3MgCl(aq)
2Fe(s)
Answer : The net ionic equation will be,
[tex]2Fe^{3+}(aq)+3Mg(s)\rightarrow 3Mg^{2+}(aq)+2Fe(s)[/tex]
Explanation :
In the net ionic equations, we are not include the spectator ions in the equations.
Spectator ions : The ions present on reactant and product side which do not participate in a reactions. The same ions present on both the sides.
The given balanced ionic equation will be,
[tex]2FeCl_3(aq)+3Mg(s)\rightarrow 3MgCl_2(aq)+2Fe(s)[/tex]
The ionic equation in separated aqueous solution will be,
[tex]2Fe^{3+}(aq)+6Cl^{-}(aq)+3Mg(s)\rightarrow 3Mg^{2+}(aq)+6Cl^{-}(aq)+2Fe(s)[/tex]
In this equation, [tex]Cl^{-}[/tex] is the spectator ion.
By removing the spectator ions from the balanced ionic equation, we get the net ionic equation.
The net ionic equation will be,
[tex]2Fe^{3+}(aq)+3Mg(s)\rightarrow 3Mg^{2+}(aq)+2Fe(s)[/tex]
What is the molarity of a solution of 10% by mass cadmium sulfate, CdSO4 (molar mass = 208.46 g/mol) by mass? The density of the solution is 1.10 g/mL.
a) 0.528 M
b) 0.436 M
c) 0.479 M
d) 0.048 M
e) 22.9 M
Answer:
a. 0.528 M ..
Explanation:
Hello!
In this case, since the given by-mass percent can be written as:
[tex]\frac{10gCdSO_4}{100g\ sol}[/tex]
By using the density and molar mass of the solute, cadmium sulfate, we can compute the molarity, by also making sure we convert from mL to L of solution:
[tex]M=\frac{10gCdSO_4}{100g\ sol}*\frac{1molCdSO_4}{208.46gCdSO_4} *\frac{1.10g\ sol}{1mL\ sol} *\frac{1000mL\ sol}{1L\ sol} \\\\M=0.528M[/tex]
Thereby, the answer is a. 0.528 M .
Best regards.
Please help!!! I’ll give brainlist
If closer means that it is inner, then it would be they are closer and made of rocks.
PLEASE GIVE BRAINLIEST!!!!
The table below shows the dimensions of two colored cubes.
Dimensions of Cubes
Cube Side (cm) Mass
(g)
Blue 5 250
White 4 320
Which cube is denser?
Blue, because the ratio of its mass and side is higher.
White, because the ratio of its mass and side is lower.
Blue, because it has more volume and less amount of matter.
White, because it has less volume, but a lot more matter.
i think it's d white one cause it's has less volume but more matter making its mass volume ratio high than that of the blue one
The white cube is denser, because it has less volume, but a lot more matter. So option D is correct.
What is matter ?A material called matter is made up of several kinds of particles, occupies space, and has inertia. The many sorts of particles each have a unique mass and size according to the fundamentals of current physics. The electron, proton, and neutron are three examples of material particles that are most well-known.
A material with a given mass and a certain volume in space is referred to as a matter. Examples of matters are pens, pencils, toothbrushes, water, and milk, as well as vehicles like cars, buses, and bicycles.
According to its physical and chemical makeup, "matter" can be defined as being composed of atoms. Ordinary matter is another name for such atomic stuff. For instance, since DNA molecules are composed of atoms, they fall under the notion of matter.
Thus, option D is correct.
To learn more about matter, follow the link;
https://brainly.com/question/3764450
#SPJ2
Please someone help me