Answer: Around 0:35 Pm or 12:35 Am
Explanation:
The equation that describes the cooling of objects can be written as:
T(t) = Ta + (Ti - Ta)*e^(k*t)
Where Ta is the ambient temperature, here Ta = 25°C.
Ti is the initial temperature of the body, we have Ti = 37°C.
t is the time.
k is a constant.
So our equation is:
T(t) = 25°C +12°C*e^(k*t)
at 2pm, the temperature was 33°C
at 3pm, the temperature was 31°C.
we want to find the hour where we have our t = 0, suppose this hour is X.
then we can write our times as:
2pm ---> 2 - X
3pm ----> 3 - X
and our equations are:
33°C = 25°C + 12°C*e^(k2 - k*X)
31° = 25°C + 12°C*e^(k3 - k*X)
So we have two equations and two variables, let's solve the system.
first, simplify it a bit, for the first eq:
33 - 25 = 12*e^(k2 - k*X)
8/12 = e^(k2 - k*X)
ln(8/12) = k*2 - k*X
for the second equation we have:
31 - 25 = 12*e^(k3 - k*X)
6/12 = e^(k3 - k*X)
ln(6/12) = k*3 - k*X
So our equations are:
1) ln(2/3) = 2*k - X*k
2) ln(1/2) = 3*k - X*k
First, let's isolate one of the variables in one of the equations. let's isolate k in the first equation.
ln(2/3)/(2-X) = k
now we can replace it in the second equation:
ln(1/2) = 3*ln(2/3)/(2 - X) - X*ln(2/3)/(2-X)
now let's solve it for X, i will take a = ln(1/2) and b = ln(2/3) so it is easier to read.
a = 3*b/(2 - X) - X*b/(2 - X)
a*(2 - X) = 3*b - X*b
2a - aX = 3b - Xb
X(a - b) = 2a - 3b
X = (2*ln(1/2) - 3*ln(2/3))/(ln(1/2) - ln(2/3)) = 0.590
now, knowing that one hour has 60 minutes, then this is:
0.59*60m = 35 minutes
So the hour of death is 0:35 Pm or 12:35 Am
Part A The potential energy for a certain mass moving in one dimension is given by U(x) = (2.0 J/m3)x3 - (15 J/m2)x2 + (36 J/m)x - 23 J. Find the location(s) where the force on the mass is zero. The potential energy for a certain mass moving in one dimension is given by U(x) = (2.0 J/m3)x3 - (15 J/m2)x2 + (36 J/m)x - 23 J. Find the location(s) where the force on the mass is zero. 3.0 m, 5.0 m 4.0 m, 5.0 m 2.0 m, 3.0 m 1.0 m
Answer:
The location are [tex]x_1 = 2 \ and \ x_2 = 3[/tex]
Explanation:
From the question we are told that
The potential energy is [tex]U(x) = (2.0 \ J/m^3) * x^3 - (15 \ J/m) * x^2 + (36 \ J/m) * x - 23 \ J[/tex]
The force on the mass can be mathematically evaluated as
[tex]F = - \frac{d U(x)}{d x } = -( 6 x^2 - 30x +36)[/tex]
The negative sign shows that the force is moving in the opposite direction of the potential energy
[tex]F = - 6 x^2 + 30x - 36[/tex]
At critical point
[tex]\frac{d U(x)}{dx} = 0[/tex]
So
[tex]- 6 x^2 + 30x - 36 = 0[/tex]
[tex]- x^2 + 5x - 6 = 0[/tex]
Using quadratic equation formula to solve this we have that
[tex]x_1 = 2 \ and \ x_2 = 3[/tex]
Crystalline germanium (Z=32, rho=5.323 g/cm3) has a band gap of 0.66 eV. Assume the Fermi energy is half way between the valence and conduction bands. Estimate the ratio of electrons in the conduction band to those in the valence band at T = 300 K. (See eq. 10-11) Assume the width of the valence band is ΔΕV ~ 10 eV.
Answer:
= 8.2*10⁻¹²
Explanation:
Probability of finding an electron to occupy a state of energy, can be expressed by using Boltzmann distribution function
[tex]f(E) = exp(-\frac{E-E_f}{K_BT} )[/tex]
From the given data, fermi energy lies half way between valence and conduction bands, that is half of band gap energy
[tex]E_f = \frac{E_g}{2}[/tex]
Therefore,
[tex]f(E) = exp(-\frac{E-\frac{E_g}{2} }{K_BT} )[/tex]
Using boltzman distribution function to calculate the ratio of number of electrons in the conduction bands of those electrons in the valence bond is
[tex]\frac{n_{con}}{n_{val}} =\frac{exp(-\frac{[E_c-E_g/2]}{K_BT} )}{exp(-\frac{[E_v-E_fg/2}{K_BT} )}[/tex]
[tex]= exp(\frac{-(E_c-E_v}{K_BT} )\\\\=exp(\frac{-(0.66eV)}{(8.617\times10^-^5eV/K)(300K)} )\\\\=8.166\times10^-^1^2\approx8.2\times10^{-12}[/tex]
a) Write the names of the materials used in the ohm law according to the Figure 1?
b) If the voltage of a circuit is 12 V and the resistance is 40 , What is the generated power?
Answer:
a. i. conducting wire
ii high-pass and low-pass filters
iii. Cobra-4 Xpert-link
iii. voltage source
b. Power generated is 3.6 W.
Explanation:
Ohm's law state that the current passing through a metallic conductor, e.g wire is directly proportional to the potential difference across its ends, provided temperature is constant.
i.e V = IR
i. conducting wire
ii high-pass and low-pass filters
iii. Cobra-4 Xpert-link
iii. voltage source
b. Given that; V = 12 V and R = 40 Ohm's.
P = IV
From Ohm's law, I = [tex]\frac{V}{R}[/tex]
So that;
P = [tex]\frac{V^{2} }{R}[/tex]
= [tex]\frac{12^{2} }{40}[/tex]
= [tex]\frac{144}{40}[/tex]
= 3.6 W
The power is 3.6 W.
An arrow is shot from a height of 1.55 m toward a cliff of height H. It is shot with a velocity of 26 m/s at an angle of 60° above the horizontal. It lands on the top edge of the cliff 3.99 s later.
(a) Draw a sketch of the given example. Include the x-y coordinate system.
(b) What is the height of the cliff?
(c) What is the maximum height reached by the arrow along its trajectory?
(d) What is the arrow's impact speed just before hitting the cliff?
Answer:
Explanation:
vertical component of the velocity of arrow
= 26 sin 60 = 22.516 m
height reached by it after 3.99 s
h = ut - 1/2 g t²
= 22.516 x 3.99 - .5 x 9.8 x 3.99²
= 89.83 - 78
11.83 m
Total height of cliff = 1.55 + 11.83
= 13.38 m
c ) maximum height covered s
v² = u² - 2gs
0 = u² - 2gs
s = u² / 2g
= 22.516² / 2 x 9.8
= 25.86
maximum height reached
= 25.86 + 1.55
= 27.41 m
d )
vertical speed after 3.99 s
v = u - gt
= 22.516 - 9.8 x 3.99
= -16.586
Horizontal component will remain unchanged
Horizontal component = 26 cos 60
= 13 m /s
Resultant of two velocities
= √ 13²+ 16.568²
= 21 m /s
what is the speed of light in quartz
Answer:
1.95 x 10^8 m/s.
Explanation:
Answer:
the answer is 1.95 x 10^8 m/s
Explanation:
You are watching an object that is moving in SHM. When the object is displaced 0.560 m to the right of its equilibrium position, it has a velocity of 2.45 m/s to the right and an acceleration of 8.60 m/s2 to the left. Part A How much farther from this point will the object move before it stops momentarily and then starts to move back to the left
Answer:
2.95m
Explanation:
The farthest distance the object can move is the radius of the circle of which the Simple harmonic motion is assumed to be a part
But V = w× r; where V is velocity,
w is angular velocity and r is radius.
Also,
a= w2r; where a is linear acceleration
but a = v× r ; by comparing both equations
Hence r = a/v =8.6/2.45 =3.51m
But the horizontal distance of the motion is given by:
X = rcosx ; where x is the angle
X is the distance covered.
We know that the maximum value of cos x is 1 which is 0°
When the object moves in a fashion directly parallel to an horizontal distance, maximum distance would be reached and hence:
X = r=3.51m
Meaning the object needs to travel 3.51-0.56=2.95m further.
Note: the acceleration of the motion is constant whether it is swinging towards the left or right.
When the object is displaced 0.560 m to the right of its equilibrium position, it has a velocity of 2.45 m/s to the right and an acceleration of 8.60 m/s2 to the left and the amplitude of motion A = 0.732 m.
What is Amplitude of motion?
The distance between the central and extreme points for a moving particle is known as the amplitude of motion.
The given data to find the amplitude of motion,
Object displaced = 0.560 m
Velocity = 2.45 m/s
Acceleration = 8.60 m/s²
Starting with sine:
x(t) = Asin(ωt)
so that t = 0, x = 0
x(t) = 0.56 m = Asin(ωt)
v(t) = x(t)'= 2.45 m/s = Aωcos(ωt)
a(t) = v(t)'= -8.60 m/s² = -Aω²sin(ωt)
x(t) / a(t) = Asin(ωt) / -Aω²sin(ωt)
0.56m / -8.60 m/s² = -1 / ω²
ω² = 15.3571 rad^2/s^2
ω = 3.91881 rad/s
x(t) / v(t) = Asin(ωt) / Aωcos(ωt)
0.560m / 2.45m/s = tan(3.91t) / 3.91rad/s
0.8937= tan(3.91t)
t = 0.176 s
x(0.176) = Asin(3.59×0.176)
0.65 m= Asin(0.631)
A = 0.732 m is the amplitude of motion.
To know more about Amplitude of motion,
https://brainly.com/question/12967589
#SPJ2
Calculate the energy released by the electron-capture decay of 5727Co. Consider only the energy of the nuclei (ignore the energy of the surrounding electrons). The following masses are given:
5727Co: 56.936296u
5726Fe: 56.935399u
Express your answer in millions of electron volts (1u=931.5MeV/c2) to three significant figures.
A negligible amount of this energy goes to the resulting 5726Fe atom as kinetic energy. About 90 percent of the time, after the electron-capture process, the 5726Fe nucleus emits two successive gamma-ray photons of energies 0.140MeV and 1.70 102MeV in decaying to its ground state. The electron-capture process itself emits a massless neutrino, which also carries off kinetic energy. What is the energy of the neutrino emitted in this case?
Express your answer in millions of electron volts.
Answer:
Explanation:
⁵⁷Co₂₇ + e⁻¹ = ²⁷Fe₂₆
mass defect = 56.936296 + .00055 - 56.935399
= .001447 u
equivalent energy
= 931.5 x .001447 MeV
= 1.3479 MeV .
= 1.35 MeV
energy of gamma ray photons = .14 + .017
= .157 MeV .
Rest of the energy goes to neutrino .
energy going to neutrino .
= 1.35 - .157
= 1.193 MeV.
You are helping your friend prepare for the next skateboard exhibition by determining if the planned program will work. Your friend will take a running start and then jump onto a heavy-duty 13-lb stationary skateboard. The skateboard will glide in a straight line along a short, level section of track, then up a curved concrete wall. The goal is to reach a height of at least 10 feet above the starting point before coming back down the slope. Your friend's maximum running speed to safely jump on the skateboard is 24 feet/second. Your friend weighs 155-lbs. What is the height hf that your friend will reach according to his plan?
Answer:
8.3 feet
Explanation:
The kinetic energy of the system on the ground is ...
KE = Σ(1/2)(mv^2) = (1/2)(155)(24^2) +(1/2)(13)(0^2) = 44640 lb·ft²/s²
The potential energy at the highest point is the same:
PE = mgh
44640 = (155 +13)(32)h
h = 44640/5376 = 8.30 . . . . feet
_____
We haven't worried too much about the conversion between pounds mass and pounds force. Whatever factor may be involved will divide out when computing the maximum height. We have used g=32 ft/s².
__
To achieve a 10 ft height, the running speed would need to be 26.34 ft/s, about 10% higher.
Scenario 2: Use the following information to answer questions 3 and 4:
Your client, Jim, is interested in weight control. He weighs 75kg.
3. If Jim walks 3.3 mph (0% grade), how long must he walk to expend 300 kcal total?
A. 52 min
B. 42 min
C. 65 min
D. 99 min
4. If Jim exercises at an intensity of 6 kcal/min, what is the leg ergometer work rate?
A. 47 watts
B. 90 watts
C. 61 watts
D. 71 watts
Answer:
A. 52 min
.A. 47 watts
Explanation:
Given that;
jim weighs 75 kg
and he walks 3.3 mph; the objective here is to determine how long must he walk to expend 300 kcal.
Using the following relation to determine the amount of calories burned per minute while walking; we have:
[tex]\dfrac{MET*weight (kg)*3.5}{200}[/tex]
here;
MET = energy cost of a physical activity for a period of time
Obtaining the data for walking with a speed of 3.3 mph From the standard chart for MET, At 3.3 mph; we have our desired value to be 4.3
However;
the calories burned in a minute = [tex]\dfrac{4.3*75 (kg)*3.5}{200}[/tex]
= 5.644
Therefore, for walking for 52 mins; Jim burns approximately 293.475 kcal which is nearest to 300 kcal.
4.
Given that:
mass m = 75 kg
intensity = 6 kcal/min
The eg ergometer work rate = ??
Applying the formula:
[tex]V_O_2 ( intensity ) = ( \dfrac{W}{m}*1.8)+7[/tex]
where ;
[tex]V_O_2 ( intensity ) = \dfrac{1 \ kcal min^{-1}*10^{-3}}{5}[/tex]
[tex]V_O_2 ( intensity ) = \dfrac{6*1 \ kcal min^{-1}*10^{-3}}{5}[/tex]
[tex]V_O_2 ( intensity ) = 0.0012[/tex]
∴[tex]0.0012 = (\dfrac{W}{75}*1.8)+7 \\ \\ W = \dfrac{0.0012-7}{1.8}*75 \\ \\ W = \dfrac{7*75}{1.8} \\ \\ W = 291.66 \ kg m /min[/tex]
Converting to watts;
Since; 6.118kg-m/min is = 1 watt
Then 291.66 kgm /min will be equal to 47.67 watts
≅ 47 watts
A trap-jaw ant snaps its mandibles shut at very high speed, good for catching small prey. But these ants also slam their mandibles into the ground; the resulting force can launch the ant into the air for a quick escape. If a 12 mg ant hits the ground with an average force of 47 mN for a time of 0.13 ms, at what speed will it leave the ground?
Answer:
FInal speed (v) = 0.509 m/s (Approx)
Explanation:
Given:
Mass of ant (m) = 12 mg
Force (f) = 47 N
Time taken (t) = 0.13 ms
Find:
FInal speed (v) = ?
Computation:
Initial velocity (u) = 0
Impulse = change in momentum
Force × TIme = change in momentum
47 × 0.13 = mv - mu
6.11 = 12 (V)
FInal speed (v) = 0.509 m/s (Approx)
assume that the initial speed is 25 m/s and the angle of projection is 53 degree above the hroizontal. the cannon ball leaves the uzzel of the cannon at a highet of 200 m.( the cannon is at the edge of the cliff) A: find the horizontal distance the cannon travles. B: when does the cannon ball reach the ground? C: find the maximum highet the cannon ball reaches.
Answer:
A. xmax = 131.49 m
B. t = 8.74 s
C. ymax = 220.33 m
Explanation:
A. In order to find the horizontal distance which cannon travels you first calculate the flight time. The flight time can be calculated by using the following formula:
[tex]y=y_o+v_osin\theta-\frac{1}{2}gt^2[/tex] (1)
yo: height from the projectile is fired = 200m
vo: initial velocity of the projectile = 25m/s
g: gravitational acceleration = 9.8 m/s^2
θ: angle between the direction of the initial motion of the ball and the horizontal = 53°
t: time
You need the value of t when the projectile hits the ground. Then, in th equation (1) you make y = 0m.
When you replace the values of all parameters in the equation (1), you obtain the following quadratic formula:
[tex]0=200+(25)sin53\°t-\frac{1}{2}(9.8)t^2\\\\0=200+19.96t-4.9t^2[/tex] (2)
You use the quadratic formula to obtain the value of t:
[tex]t_{1,2}=\frac{-19.96\pm\sqrt{(19.96)^2-4(-4.9)(200)}}{2(-4.9)}\\\\t_{1,2}=\frac{-19.96\pm65.71}{-9.8}\\\\t_1=8.74s\\\\t_2=-4.66s[/tex]
You use the positive value because it has physical meaning.
Now, you can calculate the horizontal range of the projectile by using the following formula:
[tex]x_{max}=v_ocos\theta t[/tex]
[tex]x_{max}=(25m/s)(cos53\°)(8.74s)=131.49m[/tex]
The cannon ball travels a horizontal distance of 131.49 m
B. The cannon ball reaches the canon for t = 8.74s
C. The maximum height is obtained by using the following formula:
[tex]y_{max}=y_o+\frac{v_o^2sin^2\theta}{2g}[/tex] (3)
By replacing in the equation (3) the values of all parameters you obtain:
[tex]y_{max}=200m+\frac{(25m/s)^2(sin53\°)^2}{2(9.8m/s^2)}\\\\y_{mac}=200m+20.33m=220.33m[/tex]
The maximum height reached by the cannon ball is 220.33m
g A 4 cm diameter "bobber" with a mass of 3 grams floats on a pond. A thin, light fishing line is tied to the bottom of the bobber, and from the bottom hangs a 10 gram lead weight. The density of lead is 11.3 g/cm3. What fraction of the bobber's volume is submerged, as a percent of the total volume
Answer:
Explanation:
total weight acting downwards
= 3g + 10g
13 g
volume of lead = 10 / 11.3 = .885 cm³
Let the volume of bobber submerged in water be v in floating position . buoyant force on bobber = v x 1 x g
Buoyant force on lead = .885 x 1 x g
total buoyant force = vg + .885 g
For floating
vg + .885 g = 13 g
v = 12.115 cm³
total volume of bobber
= 4/3 x 3.14 x 2³
= 33.5 cm³
fraction of volume submerged
= 12.115 / 33.5
= .36
= 36 %
The fraction of the bobber's volume submerged as a percent of the total volume is 36.2 %.
The given parameters;
diameter of the bobber, d = 4 cmmass of the bobber, m = 3 gmass of the lead, m = 10 gdensity of the lead, ρ = 11.3 g/cm³The volume of the bobber is calculated as follows;
[tex]V = \frac{4}{3} \pi \times r^3\\\\V = \frac{4}{3} \pi \times (2)^3\\\\V = 33.52 \ cm^3[/tex]
The buoyant force experienced by the bobber due to the volume submerged is calculated as follows;
[tex]F _b= \rho Vg\\\\F_b = 1 \times V \times g\\\\F_b = Vg[/tex]
The volume of the lead is calculated as follows;
[tex]V = \frac{mass}{density} \\\\V = \frac{10}{11.3} \\\\V = 0.885 \ cm^3[/tex]
The buoyant force experienced by the lead due to the volume submerged is calculated as follows
[tex]F_b = \rho Vg\\\\F_b = 0.885 g[/tex]
The total buoyant force is calculated as;
[tex]Vg + 0.885g = (3+ 10)g\\\\g(V + 0.885) = 13g\\\\V+ 0.885 = 13\\\\V = 13 -0.885\\\\V = 12.12 \ cm^3[/tex]
The fraction of the bobber's volume submerged as a percent of the total volume is calculated as follows;
[tex]= \frac{12.12}{33.52} \times 100\%\\\\= 36.2 \ \%[/tex]
Learn more here:https://brainly.com/question/17009786
The brakes of a car are applied to give it an acceleration of -2m/s^2. The car comes to a stop in 3s. What was its speed when the brakes were applied?
Answer:
So if its acceleration is -2m/s^2 that means every second the initial velocity would be subtracted by 2. So since it took 3 seconds 2*3=6. The initial velocity was 6 m/s
Why do some nucleus emit electrons?
Answer:
In beta-minus decay, a neutron breaks down to a proton and an electron, and the electron is emitted from the nucleus. In beta-plus decay, a proton breaks down to a neutron and a positron, and the positron is emitted from the nucleus.
Explanation:
Hope this helps!
EASY HELP
As a space shuttle climbs, _____.
its mass increases
its mass decreases
its weight increases
its weight decreases
Answer: it's weight decreases
Explanation:
g The potential energy of a pair of hydrogen atoms separated by a large distance x is given by U(x)=−C6/x6, where C6 is a positive constant. Part A What is the force that one atom exerts on the other? Express your answer in terms of C6 and x. Fx = nothing Request Answer Part B Is this force attractive or repulsive? Is this force attractive or repulsive? attractive repulsive
Answer:
[tex]F_x = -\frac{6 C_6}{2^7}[/tex]
Attractive
Explanation:
Data provided in the question
The potential energy of a pair of hydrogen atoms given by [tex]\frac{C_6}{X_6}[/tex]
Based on the given information, the force that one atom exerts on the other is
Potential energy μ = [tex]\frac{C_6}{X_6}[/tex]
Force exerted by one atom upon another
[tex]F_x = \frac{\partial U}{\partial X} = \frac{\partial}{\partial X} (-\frac{C_6}{X^6})[/tex]
or
[tex]F_x = \frac{\partial}{\partial X} (\frac{C_6}{X^6})[/tex]
or
[tex]F_x = -\frac{6 C_6}{2^7}[/tex]
As we can see that the [tex]C_6[/tex] comes in positive and constant which represents that the force is negative that means the force is attractive in nature
A spring is hung from the ceiling. A 0.573-kg block is then attached to the free end of the spring. When released from rest, the block drops 0.198 m before momentarily coming to rest, after which it moves back upward. (a) What is the spring constant of the spring
Answer:
a) The spring constant of the spring is [tex]28.381\,\frac{N}{m}[/tex], b) The angular frequency of the block is [tex]7.038\,\frac{rad}{s}[/tex].
Explanation:
This question is incomplete and complete version will be presented herein:
A spring is hung from the ceiling. A 0.573-kg block is then attached to the free end of the spring. When released from rest, the block drops 0.198 m before momentarily coming to rest, after which it moves back upward. (a) What is the spring constant of the spring (b) Find the angular frequency of the block 's vibrations.
a) Since spring is hung from the ceiling and is stretched by action of gravity on 0.573 kilogram block. According to the Hooke's Law, force experimented by the spring is directly proportional to elongation. An expression describing the phenomenon is presented and described below: (System at equilibrium - Newton's Second Law)
[tex]m\cdot g = k\cdot \Delta x[/tex]
Where:
[tex]m[/tex] - Mass, measured in kilograms.
[tex]g[/tex] - Gravitational constant, measured in meters per square second.
[tex]k[/tex] - Spring constant, measured in newtons per meter.
[tex]\Delta x[/tex] - Spring linear deformation, measured in meters.
Now, the spring constant is cleared in this equation and outcome is computed: ([tex]m = 0.573\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]\Delta x = 0.198\,m[/tex])
[tex]k = \frac{m\cdot g}{\Delta x}[/tex]
[tex]k = \frac{(0.573\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)}{0.198\,m}[/tex]
[tex]k = 28.381\,\frac{N}{m}[/tex]
The spring constant of the spring is [tex]28.381\,\frac{N}{m}[/tex].
b) Let suppose that mass-spring system is experimenting a simple harmonic motion, so that angular frequency is equal to:
[tex]\omega = \sqrt{\frac{k}{m} }[/tex]
Given that [tex]k = 28.381\,\frac{N}{m}[/tex] and [tex]m = 0.573\,kg[/tex], the angular frequency, measured in radians per second, of the block is:
[tex]\omega = \sqrt{\frac{28.381\,\frac{N}{m} }{0.573\,kg} }[/tex]
[tex]\omega = 7.038\,\frac{rad}{s}[/tex]
The angular frequency of the block is [tex]7.038\,\frac{rad}{s}[/tex].
Use the Bohr model to address this question. When a hydrogen atom makes a transition from the 5 th energy level to the 2nd, counting the ground level as the first,
A. What is the energy E of the emitted photon in electron volts?、
B. What is the wavelength in nanometers of the emitted photon?
C. What is the radius of the hydrogen atom in nanometers in its initial 5th energy level?
Answer:
A. 2.82 eV
B. 439nm
C. 59.5 angstroms
Explanation:
A. To calculate the energy of the photon emitted you use the following formula:
[tex]E_{n1,n2}=-13.4(\frac{1}{n_2^2}-\frac{1}{n_1^2})[/tex] (1)
n1: final state = 5
n2: initial state = 2
Where the energy is electron volts. You replace the values of n1 and n2 in the equation (1):
[tex]E_{5,2}=-13.6(\frac{1}{5^2}-\frac{1}{2^2})=2.82eV[/tex]
B. The energy of the emitted photon is given by the following formula:
[tex]E=h\frac{c}{\lambda}[/tex] (2)
h: Planck's constant = 6.62*10^{-34} kgm^2/s
c: speed of light = 3*10^8 m/s
λ: wavelength of the photon
You first convert the energy from eV to J:
[tex]2.82eV*\frac{1J}{6.242*10^{18}eV}=4.517*10^{-19}J[/tex]
Next, you use the equation (2) and solve for λ:
[tex]\lambda=\frac{hc}{E}=\frac{(6.62*10^{-34} kg m^2/s)(3*10^8m/s)}{4.517*10^{-19}J}=4.39*10^{-7}m=439*10^{-9}m=439nm[/tex]
C. The radius of the orbit is given by:
[tex]r_n=n^2a_o[/tex] (3)
where ao is the Bohr's radius = 2.380 Angstroms
You use the equation (3) with n=5:
[tex]r_5=5^2(2.380)=59.5[/tex]
hence, the radius of the atom in its 5-th state is 59.5 anstrongs
A) The energy E of the emitted photon in electron volts is; E = 2.856 eV
B) The wavelength in nanometers of the emitted photon is; λ = 434.4nm
C) The radius of the hydrogen atom in nanometers in its initial 5th energy level is; rₙ = 1.323 nm
A) Formula for the energy E of the emitted photons is;
E = -13.6([tex]\frac{1}{n_{2}^2} - \frac{1}{n_{1}^2}[/tex])
We are given;
n₂ = 5
n₁ = 2
Thus;
E = -13.6([tex]\frac{1}{5^2} - \frac{1}{2^2}[/tex])
E = 2.856 eV
B) The formula for the wavelength is;
λ = hc/E
where;
h is Planck's constant = 6.626 × 10⁻³⁴ m².kg/s
c is speed of light = 3 × 10⁸ m/s
E is energy of photon
λ is wavelength of the photon
Earlier we saw that E = 2.856 eV. Converting to Joules gives;
E = 4.5758 × 10⁻¹⁹ J
Thus;
λ = (6.626 × 10⁻³⁴ × 3 × 10⁸)/(4.5758 × 10⁻¹⁹)
λ = 4.344 × 10⁻⁷ m
Converting to nm gives;
λ = 434.4nm
C) Formula for the radius of the hydrogen atom is;
rₙ = n²a₀
where;
a₀ is bohr's radius = 5.292 × 10⁻¹¹ m
n = 5
Thus;
rₙ = 5² × 5.292 × 10⁻¹¹
rₙ = 1.323 × 10⁻⁹
rₙ = 1.323 nm
Read more at; https://brainly.com/question/17227537
How can I show that the sphere of radius R performs a simple harmonic movement. how can i set its reference point and make the free body diagram.
I have the torque sum equation which is equal to the moment of inertia by angular acceleration
Explanation:
Draw a free body diagram of the pendulum (the combination of the sphere and the massless rod). There are three forces on the pendulum:
Weight force mg at the center of the sphere,
Reaction force in the x direction at the pivot,
Reaction force in the y direction at the pivot.
Sum the torques about the pivot O.
∑τ = I d²θ/dt²
mg (L sin θ) = I d²θ/dt²
For small θ, sin θ ≈ θ.
mg L θ = I d²θ/dt²
Since d²θ/dt² is directly proportional to θ, this fits the definition of simple harmonic motion.
If you wish, you can use parallel axis theorem to find the moment of inertia about O:
I = Icm + md²
I = ⅖ mr² + mL²
mg L θ = (⅖ mr² + mL²) d²θ/dt²
gL θ = (⅖ r² + L²) d²θ/dt²
A CD is spinning on a CD player. In 220 radians, the cd has reached an angular speed of 92 r a d s by accelerating with a constant acceleration of 14 r a d s 2 . What was the initial angular speed of the CD
Answer:
The initial angular speed is [tex]w_i = 48 \ rad/s[/tex]
Explanation:
From the question we are told that
The angular displacement is [tex]\theta = 220 \ rad[/tex]
The angular speed is [tex]w_f = 92 \ rad/s[/tex]
The acceleration is [tex]\alpha = 14 \ rad/s^2[/tex]
Generally the initial angular speed can be evaluated as
[tex]w_f ^2 = w_i ^2 + 2 * \alpha * \theta[/tex]
=> [tex]w_i ^2 = w_f ^2 - 2 * \alpha * \theta[/tex]
substituting values
=> [tex]w_i ^2 = 92 ^2 - 2 * 14 * 220[/tex]
=> [tex]w_i ^2 = 2304[/tex]
=> [tex]w_i = 48 \ rad/s[/tex]
A single loop of wire with an area of 0.0820 m2 is in a uniform magnetic field that has an initial value of 3.80 T, is perpendicular to the plane of the loop, and is decreasing at a constant rate of 0.220 T/s .
Required:
a. What emf is induced in this loop?
b. If the loop has a resistance of 0.600Ω, find the current induced in the loop.
Answer:
a) emf = 0.01804 V
b) I = 0.03 A
Explanation:
a) The emf is calculated by using the following formula:
[tex]|emf|=|\frac{d\Phi_B}{dt}|=|\frac{d(A\cdot B)}{dt}|[/tex] [tex]=A|\frac{dB}{dt}|[/tex]
A: area of the loop = 0.0820m^2
B: magnitude of the magnetic field
dB/dt: change of the magnetic field, in time: 0.220 T/s
Where ФB is the magnetic flux, the surface vector and magnetic vector are perpendicular between them, and the area A is constant.
You replace the values of A and dB/dt in the equation (1):
[tex]|emf|=(0.082m^2)(0.220T/s)=0.01804V[/tex]
b) The current in the loop is:
[tex]I=\frac{emf}{R}[/tex]
R: resistance of the loop = 0.600Ω
[tex]I=\frac{0.01804V}{0.600\Omega}=0.03A=30mA[/tex]
a. The emf induced in this loop is 18.04mV.
b. The current induced in the loop is 30.06mA.
a. We know that,
[tex]flux(\phi)=B*A[/tex]
Where B is magnetic field and A is the area.
[tex]emf=\frac{d\phi}{dt}=A*\frac{dB}{dt}[/tex]
Given that, Area , [tex]A=0.0820m^{2},B=3.80T,\frac{dB}{dt}=0.220T/s[/tex]
Substituting all values in above equation.
[tex]emf=0.0820*0.220=0.01804V=18.04mV[/tex]
b. Resistance, [tex]R=0.600ohm[/tex]
Current induced in the loop is,
[tex]I=\frac{emf}{R}=18.04/0.6=30.06mA[/tex]
Hence, the emf induced in this loop is 18.04mV.
The current induced in the loop is 30.06mA.
Learn more:
https://brainly.com/question/15477464
At a time when mining asteroids has become feasible, astronauts have connected a line between their 3220-kg space tug and a 6240-kg asteroid. They pull on the asteroid with a force of 362 N. Initially the tug and the asteroid are at rest, 311 m apart. How much time does it take for the ship and the asteroid to meet
-- F = m a ... ==> a = F/m
-- The tension in the rope is 362 N. That same force acts on the asteroid and on the tug, pulling them together.
-- The asteroid's acceleration is 362N / 6240 kg = 0.058 m/s², headed for a point on the rope somewhere between the asteroid and the tug.
-- The tug's acceleration is 362 N / 3220 kg = 0.112 m/s², also headed for a point on the rope somewhere between the tug and the asteroid.
-- So now we have a gap between them, initially 311 m long, closing with a speed that starts at zero and accelerates at 0.170 m/s² .
-- D = (1/2) a T²
311 m = (1/2) (0.170 m/s²) (T²)
T² = 311 m / 0.085 m/s²
T = √(311/0.085) seconds
T = 60.41 seconds
The answer I get is so durn near 60 seconds (1 minute) that it suggests two things to me: ==> That's where the weird numbers of 362N and 311m came from, and ==> there's a good chance that my answer is correct.
Note: It's important to me that you know that 5 points for this one is really cheap and chintzy, and the reason I decided to try it was only to see whether I could.
If you secure a refrigerator magnet about 2mmfrom the metallic surface of a refrigerator door and then move the magnet sideways, you can feel a resistive force, indicating the presence of eddy currents in the surface.
A)Estimate the magnetic field strength Bof the magnet to be 5 mTand assume the magnet is rectangular with dimensions 4 cmwide by 2 cmhigh, so its area A is 8 cm2. Now estimate the magnetic flux ΦB into the refrigerator door behind the magnet.
Express your answer with the appropriate units.
B)If you move the magnet sideways at a speed of 2 cm/s, what is a corresponding estimate of the time rate at which the magnetic flux through an area A fixed on the refrigerator is changing as the magnet passes over? Use this estimate to estimate the emf induced under the rectangle on the door's surface.
Express your answer with the appropriate units.
Answer:
(A) 4* 6 ^ ⁻6 T m² (B) 2 * 10 ^ ⁻6 v
Explanation:
Solution
Given that:
A refrigerator magnet about = 2 mm
The estimated magnetic field strength of the magnet is = 5 m T
The Area = 8 cm²
Now,
(A) The magnetic flux ΦB = BA
Thus,
ΦB = (5 * 10^⁻ 3) ( 4 * 10 ^⁻2) * ( 2 * 10^ ⁻2) Tm²
So,
ΦB = 4* 6 ^ ⁻6 T m²
(B)By applying Faraday's Law we have the following formula given below:
Ε = Bℓυ
Here,
ℓ = 2 cm the same as 2 * 10 ^⁻2 m
B = 5 m T = 5 * 10 ^ ⁻3 T
υ = 2 cm/s = 2 * 10 ^ ⁻2 m/s
Thus,
Ε = (5 * 10 ^ ⁻3 T) * (2 * 10 ^ ⁻2) (2 * 10 ^ ⁻2) v
E =2 * 10 ^ ⁻6 v
A) The magnetic flux ΦB into the refrigerator door behind the magnet :
4 * 6⁻⁶ Tm²B) The estimated emf induced under the rectangle on the door's surface ;
2 * 10⁻⁶ vGiven data :
magnetic field strength of magnet ( B ) = 5 mT
size of refrigerator magnet = 2 mm
Area of magnet ( A ) = 4 * 2 = 8 cm²
A) Determine the magnetic flux ΦBwhere ; ΦB = BA
ΦB = ( 5 * 10⁻³ ) * ( 4 * 10⁻² ) * ( 2 * 10⁻² ) Tm²
= 4 * 6⁻⁶ Tm²
B) Determine estimated emf inducedTo determine the estimated emf we will apply Faraday's law
Ε = Bℓυ ---- ( 2 )
where : B = 5 * 10⁻³ T, ℓ = 2 * 10⁻² m, υ = 2 * 10⁻² m/s
insert values into equation 2
E = ( 5 * 10⁻³ ) * ( 2 * 10⁻² ) * ( 2 * 10⁻² )
= 2 * 10⁻⁶ v
Hence we can conclude that The magnetic flux ΦB is 4 * 6⁻⁶ Tm² and The estimated emf induced is 2 * 10⁻⁶ v
Learn more about magnet flux : https://brainly.com/question/4721624
A uniform thin spherical shell of mass M=2kg and radius R=0.23m is given an initial angular speed w=18.3rad/s when it is at the bottom of an inclined plane of height h=3.5m, as shown in the figure. The spherical shell rolls without slipping. Find wif the shell comes to rest at the top of the inclined plane. (Take g-9.81 m/s2, Ispherical shell = 2/3 MR2 ).Express your answer using one decimal place.
Answer:
47.8rad/s
Explanation:
For energy to be conserved.
The potential energy sustain by the object would be equal to K.E
P.E = m× g× h = 2 × 9.81× 3.5= 68.67J
Now K.E = 1/2 × I × (w1^2 - w0^2)
I = 2/3 × M × R2
= 2/3 × 2 × (0.23)^2= 0.0705
Hence
W1 = final angular velocity
Wo = initial angular velocity
From P.E = K.E we have;
68.67J = 1/2 × 0.0705 × (w1^2 - w0^2)
(w1^2 - w0^2) = 1948.09
W1^2 = 1948.09 + (18.3^2)
W1^2=2282.98
W1 = √2282.98
=47.78rad/s
= 47.8rad/s to 1 decimal place.
A swimmer heading directly through a 200m wide river reaches the opposite shore in 6 min 40s. She is washed downstream 480 m. How fast can you swim in calm water?
Answer :v=480m400s=1.2ms
2002+4802=H2
The hypotenuse H=520m
A quicker way to get the length of the hypotenuse is to recognize that this is a simple 5–12–13 triangle where the sides are multiples of 5, 12, and 13:
5(40) = 200m, 12(40)= 480m, 13(40)= 520m
We know that the swimmer travelled 520 m in 400 seconds, so her average speed was:
VR=520m400sec= 1.3ms
hope i got it right!! xx
Explanation:
The frequency of the applied RF signal used to excite spins is directly proportional to the magnitude of the static magnetic field used to align the spins, with proportionality constant 5 hz/T. If the strength of the applied field is known to be 20 T plus or minus 3 T, which of the following correctly describes the uncertainty in the INVERSE frequency (1/frequency)?
A. 3/2000s
B. 3/5s
C. 1/15s
D. 1/4
Complete Question
The complete question is shown on the first uploaded image
Answer:
The uncertainty in inverse frequency is [tex]\Delta [\frac{1}{w} ]= \frac{3}{2000} \ s[/tex]
Explanation:
From the question we are told that
The value of the proportionality constant is [tex]k = 5 \frac{Hz }{T}[/tex]
The strength of the magnetic field is [tex]B = 20 \ T[/tex]
The change in this strength of magnetic field is [tex]\Delta B = 3 \ T[/tex]
The magnetic field is given as
[tex]B = \frac{k}{\frac{1}{w} }[/tex]
Where [tex]w[/tex] is frequency
The uncertainty or error of the field is given as
[tex]\Delta B = \frac{k }{[\frac{1}{w}^]^2 } \Delta [\frac{1}{w} ][/tex]
The uncertainty in inverse frequency is given as
[tex]\Delta [\frac{1}{w} ] = \frac{\Delta B}{k [\frac{1}{w^2} ]}[/tex]
[tex]\Delta [\frac{1}{w} ]= \frac{\Delta B}{k (B)^2 }[/tex]
substituting values
[tex]\Delta [\frac{1}{w} ]= \frac{3}{5 (20)^2 }[/tex]
[tex]\Delta [\frac{1}{w} ]= \frac{3}{2000} \ s[/tex]
An object with a mass of 1500 g (grams) accelerates 10.0 m/s2 when an
unknown force is applied to it. What is the amount of the force
Answer:
15N
Explanation:
F=ma
m=1500g = 1.5kg
a=10m/s2
1.5×10=15 N
Answer:15000gms^-2
Explanation:
F=m×a
m=1500g, a=10ms^-2
F=(1500×10)gms^-2
F=15000gms^-2
A worker with spikes on his shoes pulls on rope that is attached to a box that is resting on a flat, frictionless frozen lake. The box has mass m, and the worker pulls with a constant tension T at an angle θ = 40 ∘ above the horizontal. There is a strong headwind on the lake, which produces a horizontal force Fw that is pointed in the opposite direction than the box is being pulled. Draw a free-body diagram for this system. Assume that the worker pulls the box to the right. If the wind force has a magnitude of 30 N, with what tension must the worker pull in order to move the box at a constant velocity?
Answer:
a
The free body diagram is shown on the first uploaded image
b
The tension on the rope is [tex]T=39.16 \ N[/tex]
Explanation:
From the question we are told that
The mass of the box is m
The tension on the box is T
The angle at which it is pulled is [tex]\theta = 40^o[/tex]
The force produced by the strong head wind is [tex]Fw = 30 \ N[/tex]
At equilibrium the net force acting on the block along the horizontal axis is zero i.e
[tex]Tcos \theta -F_w = 0[/tex]
substituting values
[tex]Tcos (40) -30 = 0[/tex]
[tex]Tcos (40) = 30[/tex]
[tex]T(0.76604)) = 30[/tex]
[tex]T=39.16 \ N[/tex]
Which statement best describes one way that the molecules differ from atoms? a. A molecule can contain a nucleus about which its electrons orbit b. A molecule can contain two atoms of the same element. C. Only a molecule can be the smallest particle of a certain element. d. Only a molecule can be broken down into two or more different elements.
B and D are both true statements. I'm not comfortable saying that either one is better than the other one.
The statement that best describes one way that molecules differ from atoms is a molecule can contain two atoms of the same element, and only a molecule can be broken down into two or more different elements. The correct options are b and d.
What are atoms and molecules?According to science, an atom is the smallest component of an element that can exist freely or not. A molecule, on the other hand, is the smallest component of a chemical and is made up of a group of atoms linked together by a bond.
A molecule is the smallest component of a substance that has the chemical properties of the compound.
The term "independent molecule" is not commonly used to refer to atoms and complexes linked by non-covalent interactions such as hydrogen or ionic bonds. Molecules are common constituents of matter.
Therefore, the correct options are b and d.
To learn more about atoms, refer to the link:
https://brainly.com/question/25617532
#SPJ2
A flat coil of wire is used with an LC-tuned circuit as a receiving antenna. The coil has a radius of 0.30 m and consists of 420 turns. The transmitted radio wave has a frequency of 1.3 MHz. The magnetic field of the wave is parallel to the normal of the coil and has a maximum value of 1.7 x 10-13 T. Using Faraday's Law of electromagnetic induction and the fact that the magnetic field changes from zero to its maximum value in one-quarter of a wave period, find the magnitude of the average emf induced in the antenna in this time.
Answer:
The average emf induce is [tex]V = 2.625 * 10^{-5} \ V[/tex]
Explanation:
From the question we are told that
The radius of the coil is [tex]r = 0.30 \ m[/tex]
The number of turns is [tex]N = 420 \ turns[/tex]
The frequency of the transition radio wave is [tex]f = 1.3\ MHz = 1.3 *10^{6} Hz[/tex]
The magnetic field is [tex]B_,{max} = 1.7 * 10^{-13} \ T[/tex]
The time taken for the magnetic field to go from zero to maximum is [tex]\Delta T = \frac{T}{4}[/tex]
The period of the transmitted radio wave is [tex]T = \frac{1}{f}[/tex]
So
[tex]\Delta T = \frac{T}{4} = \frac{1}{4 f}[/tex]
The potential difference can be mathematically represented as
[tex]V = NA (\frac{\Delta B}{\Delta T} )[/tex]
[tex]V = NA ([B_{max} - B_{min} ] * 4f)[/tex]
Where [tex]B_{min} = 0T[/tex]
substituting values
[tex]V = 420 * (\pi *(0.30)^2) * (1.7 *10^{-13} * 4 * 1.3 *10^{6})[/tex]
[tex]V = 2.625 * 10^{-5} \ V[/tex]