To determine the degree 10 Taylor Polynomial of p(x) approximated near x = 1, we need to find the derivatives of p(x) at x = 1 up to the tenth derivative.
Let's assume the function p(x) is given. We'll calculate the derivatives up to the tenth derivative, evaluating them at x = 1, and construct the Taylor Polynomial.
b) Once we have the Taylor Polynomial, we can find p(1) by substituting x = 1 into the polynomial. To find p^(10)(1), the tenth derivative evaluated at x = 1, we differentiate the function p(x) ten times and then substitute x = 1 into the resulting expression.
c) To determine the 30-degree Taylor Polynomial of p(x) at x = 1, we need to follow the same process as in part (a) but calculate the derivatives up to the thirtieth derivative. Then we construct the Taylor Polynomial using these derivatives.
Keep in mind that the specific function p(x) is not provided, so we cannot provide the actual calculations. However, you can apply the process described above using the given function p(x) to determine the desired Taylor Polynomials, p(1), and p^(10)(1).
Visit here to learn more about Polynomial:
brainly.com/question/11536910
#SPJ11
how many bit strings of length 10 either begin with three 0s or end with two 0s?
There are 352 bit strings of length 10 that either begin with three 0s or end with two 0s. To count the number of bit strings of length 10 that either begin with three 0s or end with two 0s, we can use the principle of inclusion-exclusion.
We count the number of strings that satisfy each condition separately, and then subtract the number of strings that satisfy both conditions to avoid double-counting.
To count the number of bit strings that begin with three 0s, we fix the first three positions as 0s, and the remaining seven positions can be either 0s or 1s. Therefore, there are [tex]2^7[/tex] = 128 bit strings that satisfy this condition.
To count the number of bit strings that end with two 0s, we fix the last two positions as 0s, and the remaining eight positions can be either 0s or 1s. Therefore, there are [tex]2^8[/tex] = 256 bit strings that satisfy this condition.
However, if we simply add these two counts, we would be double-counting the bit strings that satisfy both conditions (i.e., those that begin with three 0s and end with two 0s). To avoid this, we need to subtract the number of bit strings that satisfy both conditions.
To count the number of bit strings that satisfy both conditions, we fix the first three and the last two positions as 0s, and the remaining five positions can be either 0s or 1s. Therefore, there are [tex]2^5[/tex] = 32 bit strings that satisfy both conditions.
Finally, we can calculate the total number of bit strings that either begin with three 0s or end with two 0s by using the principle of inclusion-exclusion:
Total count = Count(begin with three 0s) + Count(end with two 0s) - Count(satisfy both conditions)
= 128 + 256 - 32
= 352
To learn more about bit strings, refer:-
https://brainly.com/question/31168016
#SPJ11
Question 16: Given r = 2 sin 20, find the following. (8 points) A) Sketch the graph of r. B) Find the area enclosed by one loop of the given polar curve. C) Find the exact area enclosed by the entire
The exact area enclosed by the entire curve is A = 2π (area enclosed by one loop is 4π^2 square units.The area enclosed by one loop of the given polar curve is 2π square units.
A) To sketch the graph of r = 2 sin θ, we can plot points for various values of θ and connect them to form the curve. Here is a rough sketch of the graph:
```
|
/ | \
/ | \
/ | \
/ | \
/_________|_________\
θ
```
The curve starts at the origin (0, 0) and extends outward in a wave-like pattern.
B) To find the area enclosed by one loop of the polar curve, we can use the formula for the area of a polar region, which is given by:
A = (1/2) ∫[θ1, θ2] r^2 dθ
Since we want to find the area enclosed by one loop, we need to determine the values of θ1 and θ2 that correspond to one complete loop. In this case, the curve completes one full loop from θ = 0 to θ = 2π.
Therefore, the area enclosed by one loop is:
A = (1/2) ∫[0, 2π] (2 sin θ)^2 dθ
= (1/2) ∫[0, 2π] 4 sin^2 θ dθ
= 2 ∫[0, 2π] (1 - cos(2θ))/2 dθ
= ∫[0, 2π] (1 - cos(2θ)) dθ
= [θ - (1/2)sin(2θ)] [0, 2π]
= 2π
Therefore, the area enclosed by one loop of the given polar curve is 2π square units.
C) To find the exact area enclosed by the entire curve, we need to determine the number of loops it completes. Since the given equation is r = 2 sin θ, it completes two full loops from θ = 0 to θ = 4π.
Thus, the exact area enclosed by the entire curve is:
A = 2π (area enclosed by one loop)
= 2π (2π)
= 4π^2 square units.
To learn more about curve click here:
brainly.com/question/15573662
#SPJ11
Evaluate the following indefinite and definite integrals. Give exact answers, i.e. VTT, not 1.77..., etc. To receive full credit you must state explicitly any substitutions used. 7.[10][(x2 – Vx + 4) dx
The indefinite integral of[tex]7x^2 – √x + 4 is (7/3)x^3 – (2/3)x^(3/2) + 4x + C[/tex]
To evaluate the indefinite integral, we can use the power rule of integration. For the term[tex]7x^2[/tex], we raise the power by 1 and divide by the new power, giving us [tex](7/3)x^3[/tex]. For the term -√x, we increase the power by 1/2 and divide by the new power, resulting in [tex]-(2/3)x^(3/2)[/tex]. The constant term 4x integrates to [tex]4x^2/2 = 2x^2.[/tex] Adding all these terms together, we get[tex](7/3)x^3 – (2/3)x^(3/2) + 4x + C,[/tex]where C is the constant of integration.
In the definite integral case, we would need to specify the limits of integration to obtain a numeric value.
Learn more about integration here
brainly.com/question/5028068
#SPJ11
I NEED HELP ASAP!!!!!! Coins are made at U.S. mints in Philadelphia, Denver, and San Francisco. The markings on a coin tell where it was made. Callie has a large jar full of hundreds of pennies. She looked at a random sample of 40 pennies and recorded where they were made, as shown in the table. What can Callie infer about the pennies in her jar?
A. One-third of the pennies were made in each city.
B.The least amount of pennies came from Philadelphia
C.There are seven more pennies from Denver than Philadelphia.
D. More than half of her pennies are from Denver."/>
U.S Mint Philadelphia Denver San Francisco
number of ||||| ||||| ||||| ||||| ||||| ||||| ||||| || |||
pennies
The information provided in the table, none of the options can be inferred about the overall Distribution of pennies in Callie's jar.
The information provided in the table, Callie can make the following inferences about the pennies in her jar:
A. One-third of the pennies were made in each city: This cannot be inferred from the given data. The table only shows the counts of pennies from each city in the sample of 40 pennies, and it does not provide information about the overall distribution of pennies in the jar.
B. The least amount of pennies came from Philadelphia: This cannot be inferred from the given data. The table shows equal counts of pennies from each city in the sample, so it does not indicate which city has the least amount of pennies in the jar as a whole.
C. There are seven more pennies from Denver than Philadelphia: This cannot be inferred from the given data. The table only provides the counts of pennies from each city in the sample, and it does not give the specific counts for Denver and Philadelphia. Therefore, we cannot determine if there is a difference of seven pennies between the two cities.
D. More than half of her pennies are from Denver: This cannot be inferred from the given data. The table only provides the counts of pennies from each city in the sample, and it does not give the total number of pennies in the jar. Therefore, we cannot determine if more than half of the pennies are from Denver.
In summary, based on the information provided in the table, none of the options can be inferred about the overall distribution of pennies in Callie's jar.
To know more about Distribution .
https://brainly.com/question/30331609
#SPJ8
Note the full question may be :
Based on the provided data, Callie can infer the following:
A. One-third of the pennies were made in each city:
Based on the table, we cannot determine the exact distribution of pennies from each city. The number of pennies recorded in the sample is not evenly divided among the three mints, so we cannot conclude that one-third of the pennies were made in each city.
B. The least amount of pennies came from Philadelphia:
Based on the table, Philadelphia has the fewest number of recorded pennies compared to Denver and San Francisco. Therefore, Callie can infer that the least amount of pennies in her jar came from Philadelphia.
C. There are seven more pennies from Denver than Philadelphia:
Since the exact numbers of pennies from each city are not provided in the table, we cannot determine if there are seven more pennies from Denver than Philadelphia.
D. More than half of her pennies are from Denver:
Without knowing the total number of pennies in the jar or the exact numbers from each city, we cannot infer whether more than half of the pennies are from Denver.
eric wrote down his mileage when he filled the gas tank. he wrote it down again when he filled up again, along with the amount of gas it took to fill the tank. if the two odometer readings were 48,592 and 48,892, and the amount of gas was 8.5 gallons, what are his miles per gallon? round your answer to the nearest whole number. responses 34 34 35 35 68 68 69 69
If the two odometer readings were 48,592 and 48,892, and the amount of gas was 8.5 gallons then his miles per gallon will be 35.
To calculate Eric's miles per gallon (MPG), we need to determine the number of miles he traveled on 8.5 gallons of gas.
Given that the odometer readings were 48,592 and 48,892, we can find the total number of miles traveled by subtracting the initial reading from the final reading:
Total miles traveled = Final odometer reading - Initial odometer reading
= 48,892 - 48,592
= 300 miles
To calculate MPG, we divide the total miles traveled by the amount of gas used:
MPG = Total miles traveled / Amount of gas used
= 300 miles / 8.5 gallons
Performing the division gives us:
MPG = 35.2941176...
Rounding the MPG to the nearest whole number, we get:
MPG ≈ 35
Therefore, Eric's miles per gallon is approximately 35.
To know more about fuel consumption refer here: https://brainly.com/question/29412403?#
#SPJ11
Starting from the point (4,-4,-5), reparametrize the curve r(t) = (4+3t, -4-2t, -5 + 1t) in terms of arclength. r(t(s)) = ( 4)
Starting from the point (4,-4,-5), the reparametrized curve r(t) = (4+3t, -4-2t, -5 + t) in terms of arclength is given by r(t(s)) = (4 + 3s/√14, -4 - 2s/√14, -5 + s/√14).
How can the curve r(t) be reparametrized in terms of arclength from the point (4,-4,-5)?In the process of reparametrization, we aim to express the curve in terms of arclength rather than the original parameter t. To achieve this, we need to find a new parameter s that corresponds to the arclength along the curve.
To reparametrize r(t) in terms of arclength, we first need to calculate the derivative dr/dt. Taking the magnitude of this derivative gives us the speed or the rate at which the curve is traversed.
The magnitude of dr/dt is √(9+4+1) = √14. Now, we can integrate this speed over the interval [0,t] to obtain the arclength. Since we are starting from the point (4,-4,-5), the arclength s is given by s = √14 * t.
To express the curve in terms of arclength, we can solve for t in terms of s: t = s / √14. Substituting this expression back into r(t), we obtain the reparametrized curve r(t(s)) = (4 + 3s/√14, -4 - 2s/√14, -5 + s/√14).
Reparametrization of curves in terms of arclength to simplify calculations and gain a geometric understanding of the curve's behavior.
Learn more about reparametrization
brainly.com/question/31954616
#SPJ11
Even though the following limit can be found using the theorem for limits of rational functions at infinity, use L'Hopital's rule to find the limit. 2x² + 5x+1 lim *-+ 3x? -7x+1 Select the correct ch
The limit can be found using L'Hopital's rule. The result of applying L'Hopital's rule to the given limit is 6/7.
L'Hopital's rule is a method for evaluating limits of indeterminate forms, such as 0/0 or ∞/∞. In this case, we have an indeterminate form of 0/0 when we substitute x for ±∞ in the given expression.
To apply L'Hopital's rule, we differentiate the numerator and the denominator separately and take the limit of the resulting expression. Taking the derivatives of the numerator and denominator gives 4x + 5 and -7, respectively. Then we substitute x for ±∞ in the derivative expression and find the limit.
Evaluating the limit, we get (4 * ∞ + 5) / -7, which simplifies to ∞ / -7. Since we have a division by a negative constant, the result is -∞.
Therefore, the limit using L'Hopital's rule is -∞, which is equivalent to 6/7 when considering the sign of the limit.
Learn more about L'Hopital's rule
https://brainly.com/question/24331899
#SPJ11
11
use L'Hospital to determine the following limit. Use exact values. lim (1 + sin 6x)= 20+
Using L'Hospital's rule, the limit of (1 + sin 6x) as x approaches infinity is equal to 20.
L'Hospital's rule is used when taking the limit of a function that results in an indeterminate form, such as 0/0 or infinity/infinity. In this case, we have an indeterminate form of 1 + sin(6x) as x approaches infinity.
To use L'Hospital's rule, we take the derivative of both the numerator and denominator of the function and take the limit again. We repeat this process until we have a non-indeterminate form.
Taking the first derivative of 1 + sin(6x) results in 6cos(6x). The denominator remains the same, which is 1. Taking the limit of this new function as x approaches infinity gives us 6(cos infinity), which oscillates between -6 and 6.
Taking the second derivative of the original function yields -36sin(6x). The denominator remains 1. Taking the limit of this new function as x approaches infinity gives us -36(sin infinity), which is zero.
Since we have a non-indeterminate form of (-6/1), we have reached our answer, which is equal to -6. However, since the original expression had a limit of 20, we need to subtract 6 from 20 to get our final answer of 14. Therefore, the limit of (1 + sin(6x)) as x approaches infinity is equal to 14.
Learn more about oscillates here.
https://brainly.com/questions/30111348
#SPJ11
in a particular calendar year, 10% of the registered voters in a small city are called for jury duty. in this city, people are selected for jury duty at random from all registered voters in the city, and the same individual cannot be called more than once during the calendar year.
If 10% of the registered voters in a small city are called for jury duty in a particular calendar year, then the probability of any one registered voter being called is 0.1 or 10%.
Since people are selected for jury duty at random, the selection process does not favor any one individual over another. Furthermore, the rule that the same individual cannot be called more than once during the calendar year ensures that everyone has an equal chance of being selected.
Suppose there are 1000 registered voters in the city. Then, 100 of them will be called for jury duty in that calendar year. If a person is not called in a given year, they still have a chance of being called in subsequent years.
Overall, the selection process for jury duty in this city is fair and ensures that all registered voters have an equal opportunity to serve on a jury.
Learn more about probability here,
https://brainly.com/question/10734660
#SPJ11
Let z denote a random variable that has a standard normal distribution. Determine each of the probabilities below. (Round all answers to four decimal places.) (a) P(z < 2.36) = (b) P(z 2.36) = (c) P(z < -1.22) = (d) P(1.13 < z < 3.35) = (e) P(-0.77 z -0.55) = (f) P(z > 3) = (g) P(z -3.28) = (h) P(z < 4.98) =
To determine the probabilities, we can use a standard normal distribution table or a statistical software. Here are the probabilities for each scenario:
(a) P(z < 2.36) = 0.9900
(b) P(z > 2.36) = 1 - P(z < 2.36) = 1 - 0.9900 = 0.0100
(c) P(z < -1.22) = 0.1112
(d) P(1.13 < z < 3.35) = P(z < 3.35) - P(z < 1.13) = 0.9992 - 0.8708 = 0.1284
(e) P(-0.77 < z < -0.55) = P(z < -0.55) - P(z < -0.77) = 0.2912 - 0.2815 = 0.0097
(f) P(z > 3) = 1 - P(z < 3) = 1 - 0.9987 = 0.0013
(g) P(z < -3.28) = 0.0005
(h) P(z < 4.98) = 1 (since the standard normal distribution extends to positive and negative infinity)
The probabilities listed above are determined using the standard normal distribution. The standard normal distribution is a specific case of the normal distribution with a mean of 0 and a standard deviation of 1.
In the standard normal distribution, probabilities are calculated based on the area under the curve. The values in the standard normal distribution table represent the cumulative probabilities up to a certain z-score (standard deviation value).
To calculate the probabilities:
For (a), P(z < 2.36), we look up the z-score 2.36 in the standard normal distribution table and find the corresponding cumulative probability, which is 0.9900.
For (b), P(z > 2.36), we subtract the cumulative probability P(z < 2.36) from 1, as the total area under the curve is equal to 1. Thus, we get 1 - 0.9900 = 0.0100.
For (c), P(z < -1.22), we find the cumulative probability for the z-score -1.22 in the standard normal distribution table, which is 0.1112.
For (d), P(1.13 < z < 3.35), we calculate the cumulative probability for z = 3.35 and subtract the cumulative probability for z = 1.13 from it. This gives us 0.9992 - 0.8708 = 0.1284.
For (e), P(-0.77 < z < -0.55), we find the cumulative probability for z = -0.55 and subtract the cumulative probability for z = -0.77 from it. This yields 0.2912 - 0.2815 = 0.0097.
For (f), P(z > 3), we subtract the cumulative probability P(z < 3) from 1, which results in 1 - 0.9987 = 0.0013.
For (g), P(z < -3.28), we find the cumulative probability for z = -3.28 in the standard normal distribution table, which is 0.0005.
For (h), P(z < 4.98), since the standard normal distribution extends to positive and negative infinity, the probability of any value being less than 4.98 is equal to 1.
The probabilities listed are rounded to four decimal places for simplicity and clarity.
To know more about probabilities,
https://brainly.com/question/29319403
#SPJ11
For what values of k does the function y = cos(kt) satisfy the differential equation 64y" = -81y? k= X (smaller value) k= (larger value)
The values of k that satisfy the differential equation 64y" = -81y for the function y = cos(kt) are k = -4/3 and k = 4/3.
To determine the values of k that satisfy the given differential equation, we need to substitute the function y = cos(kt) into the equation and solve for k.
First, we find the second derivative of y with respect to t. Taking the derivative of y = cos(kt) twice, we obtain y" = -k^2 * cos(kt).
Next, we substitute the expressions for y" and y into the differential equation 64y" = -81y:
64(-k^2 * cos(kt)) = -81*cos(kt).
Simplifying the equation, we get -64k^2 * cos(kt) = -81*cos(kt).
We can divide both sides of the equation by cos(kt) since it is nonzero for all values of t. This gives us -64k^2 = -81.
Finally, solving for k, we find two possible values: k = -4/3 and k = 4/3.
Therefore, the smaller value of k is -4/3 and the larger value of k is 4/3, which satisfy the given differential equation for the function y = cos(kt).
Learn more about differential equation here:
https://brainly.com/question/25731911
#SPJ11
Alebra, pick all the equations that represent the graph below, there is 3 answers
There are a few ways to work this one.
The first thing to know is that if (1,0) is an x-intercept, then (x-1) will be a factor in the factored version. So this makes the first answer correct and the second one not:
Yes: y = 3(x-1)(x-3)
No: y = 3(x+1)(x+3)
The second thing to know is that if (h,k) is the vertex, then equation in vertex form will be y = a (x-h)^2 + k.
Since (2,-3) is the vertex, then the equation would be y = a (x-2)^2 -3.
This makes the third answer correct and the fourth not:
Yes: y = 3(x-2)^2 - 3
No: y = 3(x+2)^2 + 3
By default, this means that the last answer must work, since you said there are 3 answers.
We can confirm it is correct (and not a trick question) by factoring the last answer:
y = 3x^2 - 12x +9
= 3 (x^2 -4x +3)
= 3 (x-3)(x-1)
And this matches our first answer.
Please give an example of the velocity field in terms of f(x,y,z) Give an example of a C1 velocity field F from R3 to R3 satisfying the following conditions:
a) For every (x,y,z) ∈R3, if (u,v,w) := F(x,y,z), then F(−x,y,z) = (−u,v,w).
b) For every (x,y,z) ∈R3, if (u,v,w) := F(x,y,z), then F(y,z,x) = (v,w,u).
c) (curl F)(√1/2,√1/2,0)= (0,0,2).
One example of a velocity field in terms of f(x, y, z) is:
F(x, y, z) = (f(x, y, z), f(x, y, z), f(x, y, z))
This means that the velocity field F has the same value for each component, which is determined by the function f(x, y, z).
Now, let's construct a C1 velocity field F satisfying the given conditions:
a) For every (x, y, z) ∈ R^3, if (u, v, w) := F(x, y, z), then F(-x, y, z) = (-u, v, w).
To satisfy this condition, we can choose f(x, y, z) = -x. Then, the velocity field becomes:
F(x, y, z) = (-x, -x, -x)
b) For every (x, y, z) ∈ R^3, if (u, v, w) := F(x, y, z), then F(y, z, x) = (v, w, u).
To satisfy this condition, we can choose f(x, y, z) = y. Then, the velocity field becomes:
F(x, y, z) = (y, y, y)
c) (curl F)(√1/2, √1/2, 0) = (0, 0, 2)
To satisfy this condition, we can choose f(x, y, z) = -2z. Then, the velocity field becomes:
F(x, y, z) = (-2z, -2z, -2z)
To learn more about velocity, refer below:
https://brainly.com/question/18084516
#SPJ11
a constant force f 5, 3, 1 (in newtons) moves an object from (1, 2, 3) to (5, 6, 7) (measured in cm). find the work required for this to happen
The work required to move the object from point A to point B under the influence of the given constant force is 36 Joules.
To find the work required to move an object from point A to point B under the influence of a constant force, use the formula:
Work = Force * Displacement * cos(theta)
where:
- Force is the magnitude and direction of the constant force vector,
- Displacement is the vector representing the displacement of the object from point A to point B, and
- theta is the angle between the force vector and the displacement vector.
Given:
Force (F) = 5i + 3j + k (in Newtons)
Displacement (d) = (5 - 1)i + (6 - 2)j + (7 - 3)k = 4i + 4j + 4k (in cm)
First, let's calculate the dot product of the force vector and the displacement vector:
F · d = (5)(4) + (3)(4) + (1)(4) = 20 + 12 + 4 = 36
Since the force and displacement are in the same direction, the angle theta between them is 0 degrees. Therefore, cos(theta) = cos(0) = 1.
Now calculate the work:
Work = Force * Displacement * cos(theta)
= (5i + 3j + k) · (4i + 4j + 4k) · 1
= 36
The work required to move the object from point A to point B under the influence of the given constant force is 36 Joules.
Learn more about constant force here:
https://brainly.com/question/29598403
#SPJ11
Use the given sample data to find the p-value for the hypotheses, and interpret the p-value. Assume all conditions for inference are met, and use the hypotheses given here:
H_0\:\:p_1=p_2H0p1=p2
H_A\:\:p_1\ne p_2HAp1?p2
A poll reported that 41 of 100 men surveyed were in favor of increased security at airports, while 35 of 140 women were in favor of increased security.
P-value = 0.0086; If there is no difference in the proportions, there is about a 0.86% chance of seeing the observed difference or larger by natural sampling variation.
P-value = 0.0512; If there is no difference in the proportions, there is about a 5.12% chance of seeing the observed difference or larger by natural sampling variation.
P-value = 0.0086; There is about a 0.86% chance that the two proportions are equal.
P-value = 0.0512; There is about a 5.12% chance that the two proportions are equal.
P-value = 0.4211; If there is no difference in the prop
based on the small p-value, we have evidence to reject the null hypothesis in favor of the alternative hypothesis, suggesting that there is a significant difference in the proportions of men and women favoring increased security at airports.
What is Hypothesis?
A hypothesis is an educated guess while using reasonable thinking, about the answer to a scientific question. Although it is not proof in an experiment, it is the predicted outcome of the experimentation. It can either be supported or not supported at all, but it depends on the data gathered.
Based on the provided information, the correct interpretation of the p-value would be:
P-value = 0.0086; If there is no difference in the proportions, there is about a 0.86% chance of seeing the observed difference or larger by natural sampling variation.
The p-value of 0.0086 indicates that the probability of observing the difference in proportions (favoring increased security at airports) as extreme as or larger than the one observed in the sample, assuming there is no difference in the population proportions, is approximately 0.86%.
In other words, if the null hypothesis were true (i.e., there is no difference in proportions between men and women favoring increased security at airports), there is a very low probability of obtaining the observed difference or a larger difference due to natural sampling variation.
Therefore, based on the small p-value, we have evidence to reject the null hypothesis in favor of the alternative hypothesis, suggesting that there is a significant difference in the proportions of men and women favoring increased security at airports.
To learn more about Hypothesis from the given link
https://brainly.com/question/606806
#SPJ4
In 19 years, Oscar Willow is to receive $100,000 under the terms of a trust established by his grandparents. Assuming an interest rate of 5.3%, compounded continuously, what is the present value of Oscar's legacy?
The present value of the legacy is $____________. (Round to the nearest cent as needed.)
Answer:
$36,531.33
Step-by-step explanation:
You want to know the present value of $100,000 in 19 years at an interest rate of 5.3% compounded continuously.
Future valueThe future value will be ...
FV = P·e^(rt) . . . . . . . . principal p invested at annual rate r for t years
100,000 = P·e^(0.053·19) . . . . . . . substituting given numbers
P = 100,000·e^(-0.053·19) ≈ 36,531.33
The present value of the legacy is $36,531.33.
<95141404393>
express the confidence interval .222 < p < .888 in the form p - e
The confidence interval .222 < p < .888 can be expressed as p - e, where p = 0.555 and e = 0.333.
In a confidence interval, the point estimate represents the best estimate of the true population parameter, and the margin of error represents the range of uncertainty around the point estimate.
To express the given confidence interval in the form p - e, we need to find the point estimate and the margin of error.
The point estimate is the midpoint of the interval, which is the average of the upper and lower bounds. In this case, the point estimate is (0.222 + 0.888) / 2 = 0.555.
To find the margin of error, we need to consider the distance between the point estimate and each bound of the interval.
Since the interval is symmetrical, the margin of error is half of the range.
Therefore, the margin of error is (0.888 - 0.222) / 2 = 0.333.
Now we can express the confidence interval .222 < p < .888 as the point estimate minus the margin of error, which is 0.555 - 0.333 = 0.222.
Therefore, the confidence interval .222 < p < .888 can be expressed as p - e, where p = 0.555 and e = 0.333.
Learn more about confidence interval here:
https://brainly.com/question/31748686
#SPJ11
find the standard form of the equation of the ellipse with the given characteristics. foci: (0, 0), (16, 0); major axis of length 18
The standard form of the equation of the ellipse is (x-16)²/17 + y²/81 = 1.
What is the standard form of the equation?
A standard form is a method of writing a particular mathematical notion, such as an equation, number, or expression, in a way that adheres to specified criteria. A linear equation's conventional form is Ax+By=C. The constants A, B, and C are replaced with variables x and y.
Here, we have
Given: foci: (0, 0), (16, 0); major axis of length 18.
The midpoint between the foci is the center
C: (0+16/2, 0+0/2)
C:(8,0)
The distance between the foci is equal to 2c
2c = √(0-16)²+(0-0)²
2c = 16
c = 8
The major axis length is equal to 2a
2a = 18
a = 9
Now, by Pythagoras' theorem:
c² = a² - b²
b² = a² - c²
b² = (9)² - (8)²
b² = 17
Between the coordinates of the foci, only the y-coordinate changes, this means the major axis is vertical. The standard equation of an ellipse with a vertical major axis is:
(x-h)²/b² + (y-k)²/a² = 1
(x-16)²/17 + (y-0)²/81 = 1
Hence, the standard form of the equation of the ellipse is (x-16)²/17 +y²/81 = 1.
To learn more about the standard form of the equation from the given link
https://brainly.com/question/30381326
#SPJ4
Solve the inequality. (Enter your answer using interval
notation. If there is no solution, enter NO SOLUTION.)
x3 + 4x2 − 4x − 16 ≤ 0
Solve the inequality. (Enter your answer using interval notation. If there is no solution, enter NO SOLUTION.) x3 + 4x2 - 4x - 16 50 no solution * Graph the solution set on the real number line. Use t
To solve the inequality x³ + 4x² - 4x - 16 ≤ 0,
we can proceed as follows:
Factor the expression: x³ + 4x² - 4x - 16
= x²(x+4) - 4(x+4) = (x²-4)(x+4)
= (x-2)(x+2)(x+4)
Hence, the inequality can be written as:
(x-2)(x+2)(x+4) ≤ 0
To find the solution set, we can use a sign table or plot the roots -4, -2, 2 on the number line.
This will divide the number line into four intervals:
x < -4, -4 < x < -2, -2 < x < 2 and x > 2.
Testing any point in each interval in the inequality will help to determine whether the inequality is satisfied or not. In this case, we just need to check the sign of the product (x-2)(x+2)(x+4) in each interval.
Using a sign table: Interval (-∞, -4) (-4, -2) (-2, 2) (2, ∞)Factor (x-2)(x+2)(x+4) - - - +Test value -5 -3 0 3Solution set (-∞, -4] ∪ [-2, 2]Using a number line plot:
The solution set is the union of the closed intervals that give non-negative products, that is, (-∞, -4] ∪ [-2, 2].
Therefore, the solution to the inequality x³ + 4x² - 4x - 16 ≤ 0 is given by the interval notation (-∞, -4] ∪ [-2, 2].
To know more about interval
https://brainly.com/question/31177424
#SPJ11
Showing all steps clearly, convert the following second order differential equation into a system of coupled equations. day dy/dt 2 -5y = 9 cos(4t) dx
We have a system of two coupled first-order differential equations:
dz/dt - 5y = 9cos(4t)
dy/dt = z
To convert the given second-order differential equation into a system of coupled equations, we introduce a new variable z = dy/dt. This allows us to rewrite the equation as a system of two first-order differential equations.
dz/dt = d^2y/dt^2 - 5y = 9cos(4t)
dy/dt = z
In equation (1), we substitute the value of d^2y/dt^2 as dz/dt to obtain:
dz/dt - 5y = 9cos(4t)
Now we have a system of two coupled first-order differential equations:
dz/dt - 5y = 9cos(4t)
dy/dt = z
These coupled equations represent the original second-order differential equation, where the variables y and z are dependent on time t and are related through the equations above. The first equation relates the rate of change of z to the values of y and t, while the second equation expresses the rate of change of y in terms of z.
To learn more about first-order differential click here: brainly.com/question/30645878
#SPJ11
(5 points) Find the volume of the solid obtained by rotating the region bounded by the given curves about the specified axis. x+y=2, x = 3 – (y - 1)?;
To find the volume of the solid obtained by rotating the region bounded by the curves about a specified axis, we can use the method of cylindrical shells.The limits of integration will be from y = 0 (the lower curve) to y = 2 (the upper curve).
In this case, the region is bounded by the curves x+y=2 and x = 3 – (y - 1), and we need to rotate it about the y-axis.
First, let's find the intersection points of the two curves:
x + y = 2
x = 3 – (y - 1)
Setting the equations equal to each other:
2 = 3 – (y - 1)
2 = 3 - y + 1
y = 2
So the curves intersect at the point (2, 2).
To find the volume, we integrate the circumference of each cylindrical shell and multiply it by the height. The height of each shell is the difference between the upper and lower curves at a given y-value.
Note: The negative sign in the volume indicates that the solid is oriented in the opposite direction, but it doesn't affect the magnitude of the volume.
To know more about cylindrical click the link below:
brainly.com/question/32297698
#SPJ11
A)
Find the point on the curve y= Root x Where the tanget line is
parallel to the line y = x/20
Homework: HW 1.3 Question 17, 1.3.45 Part 1 of 2 HW poin х a) Find the point on the curve y= Vx where the tangent line is parallel to the line y= 20 b) On the same axes, plot the curve y= VX, the lin
To find the point on the curve y = √x where the
tangent line
is parallel to y = x/20, we equate the derivative of y = √x to the slope of the line, 1/20. Solving this equation gives the
x-coordinate
of the point.
Using the power rule for
differentiation
, we have dy/dx = (1/2) * x^(-1/2). Since we want the tangent line to be
parallel
to y = x/20, which has a slope of 1/20, we set the derivative equal to 1/20 and solve for x:
(1/2) * x^(-1/2) = 1/20.
Simplifying this equation, we get x^(-1/2) = 1/10. Taking the reciprocal of both sides, we have x^(1/2) = 10.
Squaring
both sides, we find x = 100.
Substituting this value of x into the equation y = √x, we get y = √100 = 10.
Therefore, the point on the curve y = √x where the tangent line is parallel to y = x/20 is (100, 10).
On the same axes, we can plot the curve y = √x by plotting points and drawing a smooth
curve
that passes through them. Similarly, we can plot the line y = x/20 by finding two points on the line and connecting them with a straight line.
To learn more about
tangent line
click here :
brainly.com/question/31617205
#SPJ11
A salesperson is selling eight types of genie lamps, made of gold, silver, brass or iron and purportedly containing male or female genies. It turns out that out of each lot of 972 genie lamps of a given type, the numbers of lamps actually containing a genie are observed as follows: Gold: female- 121 Male-110 Silver: Female-60 Male-45 Brass: Female-22 Male-35 Iron: Female-80 Male-95 A king wishes to construct a palace and is looking for divine help. In search of such help, he bought three genie lamps: one female gold genie lamp, one male silver genie lamp, and one female iron lamp. A) What is the probability that a genie will appear from all three lamps? B) What is the probability exactly one genie will appear? C) assume we know that exactly one genie appears, but we do not know from which lamp. What is the conditional probability that a female genie appears?
A) The probability that a genie will appear from all three lamps is 0.00016.
B) The probability that exactly one genie will appear is 0.175.
C) The conditional probability that a female genie appears, given that exactly one genie appears, is approximately 0.699 or 69.9%.
What is the probability?A) Probability of a female genie appearing from a gold lamp: 121/972
Probability of a male genie appearing from a silver lamp: 45/972
Probability of a female genie appearing from an iron lamp: 80/972
The probability that a genie will appear from all three lamps will be:
(121/972) * (45/972) * (80/972) ≈ 0.00016
B) Probability of one genie appearing from the gold lamp: (121/972) * (927/972) * (927/972)
Probability of one genie appearing from the silver lamp: (927/972) * (45/972) * (927/972)
Probability of one genie appearing from the iron lamp: (927/972) * (927/972) * (80/972)
The probability exactly one genie will appear = [(121/972) * (927/972) * (927/972)] + [(927/972) * (45/972) * (927/972)] + [(927/972) * (927/972) * (80/972)]
The probability exactly one genie will appear ≈ 0.175
C) Probability of a female genie appearing from a gold lamp: (121/972) / 0.175
Probability of a female genie appearing from a silver lamp: (60/972) / 0.175
Probability of a female genie appearing from an iron lamp: (80/972) / 0.175
The conditional probability = [(121/972) / 0.175] + [(60/972) / 0.175] + [(80/972) / 0.175]
The conditional probability ≈ 0.699
Learn more about probability at: https://brainly.com/question/23417919
#SPJ4
Find all local maxima, local minima, and saddle points for the function given below. Enter your answer in the form (x, y, z). Separate multiple points with a comma (x,y) = 12x - 3xy2 + 4y! Answer m Ta
The function has one local maximum and two saddle points. The local maximum is located at (1, 1, 13). The saddle points are located at (-1, -1, -3) and (1, -1, -1).
To find the local maxima, minima, and saddle points of the given function, we need to analyze its critical points and second-order derivatives. Let's denote the function as f(x, y) = 12x - 3xy^2 + 4y.
To find critical points, we need to solve the partial derivatives with respect to x and y equal to zero:
∂f/∂x = 12 - 3y^2 = 0
∂f/∂y = -6xy + 4 = 0
From the first equation, we can solve for y: y^2 = 4, y = ±2. Substituting these values into the second equation, we find x = ±1.
So, we have two critical points: (1, 2) and (-1, -2). To determine their nature, we calculate the second-order derivatives:
∂²f/∂x² = 0, ∂²f/∂y² = -6x, ∂²f/∂x∂y = -6y.
For the point (1, 2), the second-order derivatives are: ∂²f/∂x² = 0, ∂²f/∂y² = -6, ∂²f/∂x∂y = -12. Since ∂²f/∂x² = 0 and ∂²f/∂y² < 0, we have a saddle point at (1, 2).
Similarly, for the point (-1, -2), the second-order derivatives are: ∂²f/∂x² = 0, ∂²f/∂y² = 6, ∂²f/∂x∂y = 12. Again, ∂²f/∂x² = 0 and ∂²f/∂y² > 0, so we have another saddle point at (-1, -2). To find the local maximum, we examine the point (1, 1). The second-order derivatives are: ∂²f/∂x² = 0, ∂²f/∂y² = -6, ∂²f/∂x∂y = -6. Since ∂²f/∂x² = 0 and ∂²f/∂y² < 0, we conclude that (1, 1) is a local maximum.
In summary, the function has one local maximum at (1, 1, 13) and two saddle points at (-1, -1, -3) and (1, -1, -1).
To learn more about function click here: brainly.com/question/31062578
#SPJ11
In the following exercises, use appropriate substitutions to write down the Maclaurin series for the given binomial.
N -1/3
177. (1-2x)2/3
The Maclaurin series for the binomial (1-2x)^(2/3) can be expressed as the sum of terms with coefficients determined by the binomial theorem. Each term is obtained by substituting values into the binomial series formula and simplifying the expression. The resulting Maclaurin series expansion can be used to approximate the function within a certain range.
To find the Maclaurin series for (1-2x)^(2/3), we can use the binomial series formula, which states that for any real number r and x satisfying |x| < 1, (1+x)^r can be expanded as a power series:
(1+x)^r = C(0,r) + C(1,r)x + C(2,r)x^2 + C(3,r)x^3 + ...
where C(n,r) is the binomial coefficient given by:
C(n,r) = r(r-1)(r-2)...(r-n+1) / n!
In our case, r = 2/3 and x = -2x. Plugging these values into the formula, we get:
(1-2x)^(2/3) = C(0,2/3) + C(1,2/3)(-2x) + C(2,2/3)(-2x)^2 + C(3,2/3)(-2x)^3 + ...
Let's calculate the first few terms:
C(0,2/3) = 1
C(1,2/3) = (2/3)
C(2,2/3) = (2/3)(2/3 - 1) = (-2/9)
C(3,2/3) = (2/3)(2/3 - 1)(2/3 - 2) = (4/27)
Substituting these values back into the series expansion, we have:
(1-2x)^(2/3) = 1 - (2/3)(-2x) - (2/9)(-2x)^2 + (4/27)(-2x)^3 + ...
Simplifying further:
(1-2x)^(2/3) = 1 + (4/3)x + (4/9)x^2 - (32/27)x^3 + ...
Therefore, the Maclaurin series for (1-2x)^(2/3) is given by the expression:
1 + (4/3)x + (4/9)x^2 - (32/27)x^3 + ...
This series can be used to approximate the function (1-2x)^(2/3) for values of x within the convergence radius of the series, which is |x| < 1.
Learn more about binomial theorem here:
brainly.com/question/30095070
#SPJ11
The Maclaurin series for the given binomial function is 1 - (4/3)x - (4/9)x²- (32/27)x³ +...
What is the Maclaurin series?
The Maclaurin series is a power series that uses the function's successive derivatives and the values of these derivatives when the input is zero.
Here, we have
Given: ([tex](1-2x)^{2/3}[/tex],
We have to find the Maclaurin series
We use the binomial series formula, which states that any real number r and x satisfying |x| < 1, [tex](1+x)^{r}[/tex] can be expanded as a power series:
[tex](1+x)^{r}[/tex]= C(0,r) + C(1,r)x + C(2,r)x² + C(3,r)x³+ ...
where C(n,r) is the binomial coefficient given by:
C(n,r) = r(r-1)(r-2)...(r-n+1) / n!
In our case, r = 2/3 and x = -2x. Plugging these values into the formula, we get:
[tex](1-2x)^{2/3}[/tex] = C(0,2/3) + C(1,2/3)(-2x) + C(2,2/3)(-2x)² + C(3,2/3)(-2x)³ + ...
Let's calculate the first few terms:
C(0,2/3) = 1
C(1,2/3) = (2/3)
C(2,2/3) = (2/3)(2/3 - 1) = (-2/9)
C(3,2/3) = (2/3)(2/3 - 1)(2/3 - 2) = (4/27)
Substituting these values back into the series expansion, we have:
[tex](1-2x)^{2/3}[/tex] = 1 - (2/3)(-2x) - (2/9)(-2x)² + (4/27)(-2x)³ + ...
Simplifying further:
[tex](1-2x)^{2/3}[/tex] = 1 + (4/3)x + (4/9)x² - (32/27)x³ + ...
Hence, the Maclaurin series for (1-2x)^(2/3) is given by the expression:
1 - (4/3)x - (4/9)x²- (32/27)x³ +...
To learn more about the Maclaurin series from the given link
https://brainly.com/question/31965660
#SPJ4
Letf be a function having derivatives of all orders for all real numbers. The third-degree Taylor polynomial is given by P(x)=4+3(x+4)² – (x+4)'. a) Find f(-4), f "(-4), and f "(-4). Let f be a function having derivatives of all orders for all real numbers. The third-degree Taylor polynomial is given by P(x)=4+3(x+4)2-(x+4). b) Is there enough information to determine whether f has a critical point at x = -4?
To find f(-4), f'(-4), and f''(-4), we can compare the given third-degree Taylor polynomial [tex]P(x) = 4 + 3(x+4)^2 - (x+4)[/tex] with the Taylor expansion of f(x) centered at x = -4.
The general form of the Taylor expansion of a function f(x) centered at x=a is given by:
[tex]f(x) = f(a) + f'(a)(x-a) + \frac{1}{2!}f''(a)(x-a)^2 + \frac{1}{3!}f'''(a)(x-a)^3 + \ldots[/tex]
Comparing the given polynomial P(x) with the Taylor expansion, we can identify the corresponding terms:
f(-4) = 4 (the constant term in P(x))
f'(-4) = 0 (since the derivative term (x+4) in P(x) is zero)
f''(-4) = -1 (the coefficient of (x+4) term in P(x))
From the given information, we can determine that f'(-4) = 0, which means that the derivative of f(x) at x = -4 is zero. However, this is not sufficient to determine whether f has a critical point at x = -4.
A critical point occurs when the derivative of a function is either zero or undefined. To determine whether f has a critical point at x = -4, we need to know more about the behavior of f(x) in the vicinity of x = -4, such as the values of higher-order derivatives and the behavior of the function on both sides of x = -4. Without this additional information, we cannot definitively determine whether f has a critical point at x = -4.
Learn more about Taylor polynomial here:
https://brainly.com/question/30551664
#SPJ11
4 4 4 11. Let f(x)={{ı – x)* +%*$*+x*}" = - x Determine f'(0) 1 2 12. If h(x)= f(g(x)) such that f(1)= = = f"(i)==ş, 8(2) = 1 and g'(2) = 3 then find h' (2) 22 = = 2 1 13. Find the equation of the
1-The value of f'(0) is -1 ,
2- the value of h'(2) is 24
3-the equation of the line passing through (3, 5) and (7, 9) is y = x + 2.
1. Calculation of f'(0):
f(x) = (√(1 - x²)) / (-x)
Apply the quotient rule:
f'(x) = [(-x)(1 - x²)(-1/2) - (√(1 - x²))(-1)] / (-x)²
Simplify the expression:
f'(x) = (x - √(1 - x²)) / (x²(1 - x²)(-1/2))
Evaluate f'(0):
f'(0) = (0 - √(1 - 0²)) / (0²(1 - 0²)(-1/2))
= (-√1) / (0²(1)(-1/2))
= -1
Therefore, f'(0) = -1.
2. Calculation of h'(2):
h(x) = f(g(x))
Apply the chain rule:
h'(x) = f'(g(x)) * g'(x)
Given values: f(1) = 4, f'(1) = 8, g(2) = 1, and g'(2) = 3.
h'(2) = f'(g(2)) * g'(2)
= f'(1) * g'(2)
= 8 * 3
= 24
Therefore, h'(2) = 24.
3. Calculation of the equation of the line passing through (3, 5) and (7, 9):
Use the slope-intercept form: y = mx + b
Calculate the slope (m):
m = (y2 - y1) / (x2 - x1)
= (9 - 5) / (7 - 3)
= 4 / 4
= 1
Choose one point (x, y) = (3, 5)
Substitute the values into the slope-intercept dorm:
5 = 1(3) + b
Solve for b:
5 = 3 + b
b = 5 - 3
b = 2
which makes the equation y = x + 2.
learn more about Chain rule here:
https://brainly.com/question/28972262
#SPJ4
The complete question is:
1. Let's consider the function f(x) = (√(1 - x²)) / (-x). Find the value of f'(0).
2. Suppose we have two functions f(x) and g(x). If h(x) is defined as h(x) = f(g(x)) and we know that f(1) = 4, f'(1) = 8, g(2) = 1, and g'(2) = 3, find the value of h'(2).
3. Determine the equation of the line passing through two points, (x1, y1) = (3, 5) and (x2, y2) = (7, 9).
5. Determine the Cartesian form of the plane whose equation in vector form is - (-2,2,5)+(2-3,1) +-(-1,4,2), s.1 ER.
The final Cartesian form of the plane is x + y + z + 5s + 2ER - 8 = 0
To determine the Cartesian form of the plane from the given equation in vector form, we need to simplify the equation and express it in the form Ax + By + Cz + D = 0.
The given equation in vector form is:
-(-2, 2, 5) + (2 - 3, 1) + -(-1, 4, 2) · (s, 1, ER)
Expanding and simplifying the equation, we get:
(2, -2, -5) + (-1, 1) + (1, -4, -2) · (s, 1, ER)
Performing the vector operations:
(2, -2, -5) + (-1, 1) + (s, -4s, -2ER)
Adding the corresponding components:
(2 - 1 + s, -2 + 1 - 4s, -5 - 2ER)
This represents a point on the plane. To express the plane in Cartesian form, we consider the coefficients of x, y, and z in the expression above.
The equation of the plane in Cartesian form is:
(x - 1 + s) + (y - 2 + 4s) + (z + 5 + 2ER) = 0
Simplifying the equation further, we get:
x + y + z + (s + 4s + 2ER) - (1 + 2 + 5) = 0
Combining like terms, we have:
x + y + z + 5s + 2ER - 8 = 0
Rearranging the terms, we obtain the final Cartesian form of the plane:
x + y + z + 5s + 2ER - 8 = 0
Learn more about Cartesian here:
brainly.com/question/28986301
#SPJ11
Initial population in a city was recorded as 4000 persons. Ten years later, this population increased to 8000. Assuming that population grew according to P(t) « ekt, the city population in twenty years turned = (A) 16,000 (B) 12,000 (C) 18,600 (D) 20,000 (E) 14, 680
The city population in twenty years is 16,000 persons.
To determine the city's population after twenty years, we can use the growth model equation [tex]P(t) = P(0) * e^(kt)[/tex], where P(t) is the population at time t, P(0) is the initial population, e is the base of the natural logarithm, k is the growth rate constant, and t is the time in years.
Given that the initial population was 4000 persons, we have P(0) = 4000. We can use the information that the population increased to 8000 persons after ten years to find the growth rate constant, k.
Using the formula[tex]P(10) = P(0) * e^(10k)[/tex] and substituting the values, we get [tex]8000 = 4000 * e^(10k).[/tex] Dividing both sides by 4000 gives us [tex]e^(10k) = 2.[/tex]
Taking the natural logarithm of both sides, we have 10k = ln(2), and solving for k gives us k ≈ 0.0693.
Now, we can find the population after twenty years by plugging in the values into the growth model equation: [tex]P(20) = 4000 * e^(0.0693 * 20) ≈[/tex] 16,000 persons.
Therefore, the city population in twenty years will be approximately 16,000 persons.
Learn more about population here
brainly.com/question/27779235
#SPJ11
i
will like please help
A table of values of an increasing function is shown. Use the table to find lower and upper estimates for TM (x) dx Jso 72 lower estimate upper estimate X X * 10 TX) -10 18 22 26 30 -1 2 4 7 9
The lower estimate for the integral of TM(x) over the interval [-10, 30] is 44, and the upper estimate is 96.
Based on the given table, we have the following values:
x: -10, 18, 22, 26, 30
TM(x): -1, 2, 4, 7, 9
To find the lower and upper estimates for the integral of TM(x) with respect to x over the interval [-10, 30], we can use the lower sum and upper sum methods.
Lower Estimate:
For the lower estimate, we assume that the function is constant on each subinterval and take the minimum value on that subinterval. So we calculate:
Δx = (30 - (-10))/5 = 8
Lower estimate = Δx * min{TM(x)} for each subinterval
Subinterval 1: [-10, 18]
Minimum value on this subinterval is -1.
Lower estimate for this subinterval = 8 * (-1) = -8
Subinterval 2: [18, 22]
Minimum value on this subinterval is 2.
Lower estimate for this subinterval = 4 * 2 = 8
Subinterval 3: [22, 26]
Minimum value on this subinterval is 4.
Lower estimate for this subinterval = 4 * 4 = 16
Subinterval 4: [26, 30]
Minimum value on this subinterval is 7.
Lower estimate for this subinterval = 4 * 7 = 28
Total lower estimate = -8 + 8 + 16 + 28 = 44
Upper Estimate:
For the upper estimate, we assume that the function is constant on each subinterval and take the maximum value on that subinterval. So we calculate:
Upper estimate = Δx * max{TM(x)} for each subinterval
Subinterval 1: [-10, 18]
Maximum value on this subinterval is 2.
Upper estimate for this subinterval = 8 * 2 = 16
Subinterval 2: [18, 22]
Maximum value on this subinterval is 4.
Upper estimate for this subinterval = 4 * 4 = 16
Subinterval 3: [22, 26]
Maximum value on this subinterval is 7.
Upper estimate for this subinterval = 4 * 7 = 28
Subinterval 4: [26, 30]
Maximum value on this subinterval is 9.
Upper estimate for this subinterval = 4 * 9 = 36
Total upper estimate = 16 + 16 + 28 + 36 = 96
Therefore, the lower estimate for the integral of TM(x) with respect to x over the interval [-10, 30] is 44, and the upper estimate is 96.
To learn more about integral
https://brainly.com/question/22008756
#SPJ11