Answer:
Thats probably 11
Explanation:
Help me out please. It’d be greatly appreciated
Answer:
Option D
2Na + Cl₂ —> 2NaCl
Explanation:
We'll begin by stating the law of conservation of matter.
The law of conservation of matter states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.
For an equation to comply with the law of conservation of matter, the number of atoms of each element must be the same on both side of the equation. This simply means that the equation must be balanced!
NOTE: An unbalanced equation simply means matter has been created or destroyed.
Now, we shall determine which equation is balanced. This can be obtained as follow:
For Option A
Na + Cl₂ —> 2NaCl
Reactant:
Na = 1
Cl = 2
Product:
Na = 2
Cl = 2
Thus, the equation is not balanced!
For Option B
2Na + 2Cl₂ —> 2NaCl
Reactant:
Na = 2
Cl = 4
Product:
Na = 2
Cl = 2
Thus, the equation is not balanced!
For Option C
2Na + Cl₂ —> NaCl
Reactant:
Na = 2
Cl = 2
Product:
Na = 1
Cl = 1
Thus, the equation is not balanced!
For Option D
2Na + Cl₂ —> 2NaCl
Reactant:
Na = 2
Cl = 2
Product:
Na = 2
Cl = 2
Thus, the equation is balanced!
From the above illustrations, only option D has a balanced equation. Thus, option D illustrate the law of conservation of matter.
A tortoise and hare start from rest and have a race. As the race begins, both accelerate forward. The hare accelerates uniformly at a rate of 1 m/s2 for 4 seconds. It then continues at a constant speed for 12.9 seconds, before getting tired and slowing down with constant acceleration coming to rest 66 meters from where it started. The tortoise accelerates uniformly for the entire distance, finally catching the hare just as the hare comes to a stop. 1)How fast is the hare going 1.6 seconds after it starts
Answer:
v = 4 m/s
Explanation:
Given that,
Initial speed of hare, u = 0
The hare accelerates uniformly at a rate of 1 m/s² for 4 seconds.
We need to find how fast is the hare going 1.6 seconds after it starts. Let the speed be v. So,
v = u+at
Substitute all the values,
v = 0+1×4
v = 4 m/s
So, the required speed of the hare is 4 m/s after it starts.
A skydiver is using wind to land on a target that is 120 m away horizontally. The skydiver starts from a height of 70 m and is falling vertically at a constant velocity of 7.0 m/s downward with their parachute open (terminal velocity). A horizontal gust of wind helps push them towards the target. What must be their total speed if they want to just hit their target
Answer:
13.9 m/s.
Explanation:
Since the vertical velocity of the skydiver is constant at v = 7.0 m/s, we find the time, t it takes him to drop from a height of h = 70 m.
So, distance = velocity time
h = vt
t = h/v = 70 m/7 m/s = 10 s
This is also the time it takes him to move horizontally a distance of d = 120 m to the target.
So, his horizontal velocity is v' = distance/time = d/t = 120m/10 s = 12 m/s.
Since both vertical and horizontal velocities are perpendicular, we add them vectorially to obtain the skydivers total speed, V.
So, V = √(v² + v'²)
= √((7.0 m/s)² + (12.0 m/s)'²)
= √(49 m²/s² + 144 m²/s²)
= √(193 m²/s²)
= 13.9 m/s.
The direction of this velocity is Ф = tan⁻¹(v/v')
= tan⁻¹(7 m/s/12 m/s)
= tan⁻¹(0.5833)
= 30.3°
True Or False weather conditions in the atmosphere can be recognized through direct observation.
Answer:
yes, we can tell if there will be rain by the swelling in rain clouds, we can also see if a tornado is forming based on the look of the wall cloud. we can use satellites to predict the amount of precipitation or wind.
Explanation:
thank you for ur generosity
is
5
The specific heat of copper is 0.385 J/g
°C. How much thermal energy is required
to increase the temperature of a 20g
sample of copper from 20°C to 50°C?
Q = m CAT
A 154 )
B 231 )
C 308 )
D 385 )
Answer:
Required energy Q = 231 J
Explanation:
Given:
Specific heat of copper C = 0.385 J/g°C
Mass m = 20 g
ΔT = (50 - 20)°C = 30 °C
Find:
Required energy
Computation:
Q = mCΔT
Q = 20(0.385)(30)
Required energy Q = 231 J
Can someone please help me get this right pleaseee I’ll mark brainless .
Answer:i think it is c
Explanation:
Answer:
Explanation: i think its c to try it
Tasks
Task 2 - Compare and contrast the use of D'Alembert's principle with
the principle of conservation of energy to solve an
engineering problem
A motor vehicle having a mass of 800 kg is at rest on an incline of 1 in 8 when the
brakes are released. The vehicle travels 30 m down the incline against a constant
frictional resistance to motion of 100 N where it reaches the bottom of the slope.
a) Using the principle of conservation of energy, calculate the velocity of the
vehicle at the bottom of the incline.
b) Using an alternative method that does not involve a consideration of energy,
cacluate the velocity of the vehicle at the bottom of the incline.
c) Discuss the merits of the two methods you have used for parts a) and b) of
this question. Justify the use of an energy method for these types of
problems.
Answer:
NE DIYON INGILIZ MISIN SEN
Please answer the question
Answer:
D
Explanation:
He walked a shorter distance, she walked a longer distance but got that wing thingies
After watching this video, Blake, a student in an introductory physics class, makes the following claim: The acceleration and velocity of the glider are both momentarily zero when the glider changes direction. The velocity of the glider must be zero for an instant when the glider changes direction. Because the velocity is zero, the acceleration must also be zero. 1. Respond to Blake's claim. Which parts, if any do you agree with, and which parts do you not agree with
Answer:
Please see below as the answer is self- explanatory.
Explanation:
Any time that an object changes direction (from leftward to rightwward, or from upward to downward) the velocity must be zero just for one instant, when is on the verge of changing the direction.This is needed because velocity changes as a continuous function of time, so it needs to cross the t-axis when passing from positive to negative or vice versa.However, the claim that in the moment that velocity is zero, the acceleration is also zero, is false.Due to acceleration is the rate of change of velocity, and velocity is a vector, this means at any time there is a change of direction, there is an acceleration that is non-zero.For example, when an object that has been thrown upward, reaches to its maximum height, just one instant before starting to fall, the velocity becomes zero, but the acceleration (which causes the object to fall) is non-zero, due to it's the acceleration due to gravity.how can you decrease the numbers
of calories you consume
Answer: by eating less of the recommendEd servings
Explanation:
If the solid, purple line represents a prey population
(e.g., rabbits) and the dashed, red line represents a predator population (e.g., coyotes), which of the following statements is a reasonable conclusion based on the graph?
Answer:
There is no correlation that can be made between the predator and prey populations.
Explanation:
Ermrmrm.
If a 500-pound object is moved 200 feet how much work is being done?
a. 200 FT LB
b. 500 FT LB
c. 1000 FT LB
d. 100,000 FT LB
Answer:
D
Explanation:
Work = Distance x Mass
work done = 100,000 FT LB
What is work done ?
Work is done whenever a force moves something over a distance or The work done by a force is defined to be the product of component of the force in the direction of the displacement and the magnitude of this displacement.
Work done = force * displacement
given :
force = 500 pound
displacement = 200 feet
work done = 500 * 200 = 100,000 FT LB
correct option is d. 100,000 FT LB
learn more about work done
https://brainly.com/question/13662169?referrer=searchResults
#SPJ2
True or False:
Some stars appear dimmer than others. Dim stars are always further
away from us than bright stars.
Answer:
A star's brightness also depends on its proximity to us. The more distant an object is, the dimmer it appears.
20 points!!!! A 2,00ON steel rod that is 5 meters long is placed in a corner between the floor and a wall, and balanced at an angle using a cord attached to the wall The rod is balanced such that its top end is 2.38 meters away from the wall, The cord is 40 cm long, and it is attached to the wall at a height of 75 cm above the floor. The diagram to the right shows the situation If the lower end of the rod does not slip from the corner, what is the tension in the cord?
Answer:
WE NEED TO ADD ALL 40+2.38 +75+5
Explanation:
PLSE GIVE SOME POINTS DUDE
A 10,000 g body falls from a height of 20 m. Calculate the potential energy when it is at a height of 10 m
Answer:
Ep = 980 J
Explanation:
First, grams must be converted to kilograms. So, we must divide the value of the mass, by 1000.
[tex]\boxed{\frac{10000}{1000}=\boxed{10kg}}[/tex] ---------- Converted to kg.==================================================================
Data:
Mass (m) = 10 kgGravity (g) = 9.8 m/s²Height (h) = 10 mPotential Energy (Ep) = ?Use formula:
Ep = m * g * hReplace:
Ep = 10 kg * 9.8 m/s² * 10 mMultiply operations, with units:
Ep = 980 JWhat is the potential energy?
The potential energy is 980 Joules.
To have the highest magnification in a telescope, the focal length of the objective lens should be _________ and the focal length of the eyepiece lens should be ________. To have the highest magnification in a telescope, the focal length of the objective lens should be _________ and the focal length of the eyepiece lens should be ________. small; small small; large large; small large; large
Answer:
Large; small.
Explanation:
A telescope can be defined as an optical instrument or device which comprises of a curved mirror and lenses used for viewing distant objects i.e objects that are very far away such as stars and other planetary bodies. The first telescope was invented by Sir Isaac Newton.
To have the highest magnification in a telescope, the focal length of the objective lens should be large and the focal length of the eyepiece lens should be small.
This ultimately implies that, the eyepiece lens has a small focal length while the objective lens has a large focal length.
If a skaters mass increases how does that effect kinetic energy
Answer:
By paying close attention to the formula for average kinetic energy, we can see that by increasing the mass by a proportional amount will lead to an increase in the total average kinetic energy. There is a direct relationship being observed between the values.
T Or F- True or False There three types of cloud's are .
Answer:
There are three main cloud types.
The foundation consists of 10 major cloud types. In addition to cirrus, stratus, cumulus, and nimbus clouds, there are cirrostratus, cirrocumulus, altostratus, altocumulus, stratocumulus, nimbostratus, and cumulonimbus clouds. The following table places these cloud types into the four major cloud groups.
Explanation:
So false, depends what you have learned and your grade level ig
Given a volume of 1000. Cm^3 of an ideal gas at 300 k, what volume would iy occupy at a temperature of 600 k
Answer:2000 cm³
Here, pressure remains constant.
So, b the gas law
V/V' = T/ T'
1000 / V' = 300 / 600
V' = 2000 cm³
Explanation:also pls mark brainliest
Based on the data, which statement describes the most reliable way to
encode and transmit data and tells why?
A. Digital waves are more reliable because they are less likely to
change when copied.
B. Analog waves are more reliable because they include a range of
values like the original.
C. Analog waves are more reliable because they are less likely to
change when copied.
D. Digital waves are more reliable because they are slightly different
from the original.
Answer:it’s A. right for ape x
Explanation:
Based on data, digital waves are more reliable because they are less likely to change when copied (Option A).
What is a wave?A wave is a periodic distortion capable of traveling through a suitable media (either air or water).
The waves can be classified according to their direction into transversal and perpendicular.In conclusion, based on data, digital waves are more reliable because they are less likely to change when copied (Option A).
Learn more on waves here:
https://brainly.com/question/15663649
#SPJ2
a point charge q1 = 2.40 uC is held stationary at the origin. A second point charge q2 = -4.30uC moves from the point x= .150 m, y= 0.0 m, to the point x = .250 m, y= 0.0m
a) what is the charge in potential energy of the pair of charges?
b) How much work is done by the electric force on q2
Answer:150M
Explanation:
You are working as a letter sorter in a U.S. Post Office. Postal regulations require that employees' footwear must have a minimum coefficient of static friction of 0.5 on a specified tile surface. You are wearing athletic shoes for which you do not know the coefficient of static friction. In order to determine the coefficient, you imagine that there is an emergency and start running across the room. You have a coworker time you, and find that you can begin at rest and move 4.38 m in 1.21 s. If you try to move faster than this, your feet slip. Assuming your acceleration is constant, does your footwear qualify for the postal regulation?
Answer:
μ = 0.66, therefore if it compiesy with the regulations
Explanation:
Let's solve this exercise in part, let's start by finding with kinematics the acceleration of man
y = v₀ t + ½ a t²
as it starts from rest the initial velocity is zero
y = ½ a t²
a = [tex]\frac{2y}{t^2}[/tex]
a =\frac{2 \ 4.38}{1.21^2}
a = 6.46 m / s²
Now let's use Newton's second law,
Axis y
N- W = 0
N = W
N = m g
X axis
on this axis the man exerts a backward force and by the law of action and reaction the floor exerts a forward force of the same magnitude, this forward force is the friction force.
fr = m a
the friction force has an expression
fr = my N
let's substitute
μ mg = m a
μ = a / g
let's calculate
μ = 6.46 / 9.8
μ = 0.66
therefore if you comply with the regulations
Explain two reasons why astronomers are continually building larger and larger telescopes. Explain two reasons why astronomers are continually building larger and larger telescopes. Larger telescope mirrors have a larger surface area and can therefore collect more light, which makes faint objects bright enough to detect. Also, larger telescope mirrors produce more scattering of light due to diffraction, which contributes to better angular resolution. Larger telescope mirrors have a larger surface area and can therefore collect more light, which contributes to better angular resolution. Also, larger telescope mirrors produce more scattering of light due to diffraction, which makes faint objects bright enough to detect. Larger telescope mirrors have a larger surface area and can therefore collect more light, which contributes to better angular resolution. Also, larger telescope mirrors produce less scattering of light due to diffraction, which makes faint objects bright enough to detect. Larger telescope mirrors have a larger surface area and can therefore collect more light, which makes faint objects bright enough to detect. Also, larger telescope mirrors produce less scattering of light due to diffraction, which contributes to better angular resolution.
Answer:
* Larger mirrors collect more light and therefore fainter and more distant objects can have enough intensity to be detected
* arger mirrors decreases the angle of dispersion giving a better resolution of the bodies
Explanation:
Refracting telescopes get bigger every day for two main reasons.
* Larger mirrors collect more light and therefore fainter and more distant objects can have enough intensity to be detected
* the diffraction process for circular apertures is given by
θ = 1.22 λ / D
where d is the diameter of the mirror, therefore having larger mirrors decreases the angle of dispersion giving a better resolution of the bodies
Calculate the electric field associated to an electric dipole for two charges separated 10-8 m with a dipole moment of 10-33 C m. Do not use unit of measure, just a whole number. Give the result in standard notation, not in scientific notation. Use for the Coulomb constant the value k
Answer:
18 N/C
Explanation:
Given that:
Electric field constant, k = 9*10^9 N/c
Distance, r = 10^-8 m
Dipole moment, p = 10^-33
Using the relation for electric field due to dipole :
E = [2KP / r³]
E = (2 * (9*10^9) * 10^-33) ÷ (10^-8)^3
E = (18 * 10^9 * 10^-33) ÷ 10^-24
E = [18 * 10^(9-33)] ÷ 10^-24
E = (18 * 10^-24) / 10^-24
E = 18 * 10^-24+24
E = 18 * 10^0
E = 18 N/C
Three people pull simultaneously on a stubborn donkey. Jack pulls eastward with a force of 80.5 N, Jill pulls with 81.7 N in the northeast direction, and Jane pulls to the southeast with 131 N. (Since the donkey is involved with such uncoordinated people, who can blame it for being stubborn
Answer:
F = 233.52 N, θ' = 351.41º
Explanation:
In this exercise we must find the net force applied on the donkey.
For this we use Newton's second law, where we create a reference frame with the horizontal x axis
let's decompose the forces
Jack
= 80.5 N
Jill
cos 45 = F_{2x} / F₂2
sin 45 = F_{2y} / F₂2
F_{2x} = F₂ cos 45
F_{2y} = F₂ sin 45
F_{2x} = 81.7 cos 45 = 57.77 N
F_{2y} = 81.7 sin 45 = 57.77 N
Jane
cos (270 + 45) = F_{3x} / F₃3
sin 315 = F_{3y} / F₃
F_{3x} = 131 cos 315 = 92.63 N
F_{3y} = 131 sin 315 = -92.63 N
the force can be found in each axis
X axis
F_{x} = F_{1x} + F_{2x} + F_{3x}
F_{x} = 80.5 +57.77 + 92.63
F_{x} = 230.9 N
Axis y
F_{y} = F_{1y} + F_{2y} + F_{3y}
F_{y} = 0 + 57.77 -92.63
F_{y} = -34.86 N
we can give the result in two ways
a) F = (230.9 i ^ - 34.86 j ^) N
b) in the form of module and angle
we use the Pythagorean theorem
F = √(Fₓ² + F_{y}²
F = √(230.9² + 34.86²)
F = 233.52 N
let's use trigonometry for the angle
tan θ = [tex]\frac{F_y}{F_x} }[/tex]
θ = tan⁻¹ (\frac{F_y}{F_x} })
θ = tan⁻¹ (-34.86 / 230.9)
θ = -8.59º
if we measure this angle from the positive side of the x-axis counterclockwise
θ' = 360 -θ
θ‘= 360- 8.59
θ' = 351.41º
Help please ! Ill give brainliest !! ☁️✨
Which type of electromagnetic radiation is most likely to cause sunburn?
A. Ultraviolet
B. Visible light
C. Infrared
D. X-rays
This is from P.E , que some please help me
Answer:
I know that 2 is called a foul I dont know about 1 though
Steam at 6 MPa, 400C is flowing in a pipe. Connected to this pipe through a valve is a tank of volume 0.4 m 3 . This tank initially contains saturated water vapor at 0.1MPa. The valve is opened and the tank fills with steam until the pressure is 6MPa, and then the valve is closed. The process takes place adiabatically. Determine the temperature in the tank right as the valve is closed.
Answer:
2400°C
Explanation:
Volume of tank = 0.4 m^3
steam pressure = 6 Mpa
Steam temperature = 40°C
Initial pressure of tank = 0.1 MPa
Final pressure of Tank = 6 Mpa
Calculate the temperature in the tank when the Pressure in Tank = 6Mpa
since the volume of the Tank is constant = 0.4 m^3
we will apply Gay-Lussac's Law
= [tex]\frac{T1}{P1} = \frac{T2}{P2}[/tex] ------ ( 1 )
T1 = 40°c
P1 = 0.1 MPa
P2 = 6 Mpa
T2 = ?
From equation 1 above
T2 = ( T1 * P2 ) / P1
= ( 40 * 6 ) / 0.1
= 2400°C
A warm hockey puck has a coefficient of restitution of 0.50, while a frozen hockey puck has a coefficient of restitution of only 0.35. In the NHL, the pucks to be used in games are kept frozen. During a game, the referee retrieves a puck from the cooler to restart play but is told by the equipment manager that several warm pucks were just put into the cooler. To check to make sure he has a game-ready puck, the referee drops the puck on its side from a height of 2 m. How high should the puck bounce if it is a frozen puck
Answer:
the required height is 0.2449 m only
Explanation:
Given the data in the question;
Initial height = 2m
so speed of the puck before hitting the ground will be;
u² = 2gh
Initial speed u_ball = √2gh
u_ball = √( 2 × 9.8 × 2 )
u_ball = √39.2
u_ball = 6.26 m/s
given that; FOR THE FROZEN PUCK, coefficient of restitution = 0.35 only
R = - (v_ball - v_ground / u_ball - u_ ground)
so
0.35 = - (v_ball - 0 / 6.26 - 0)
0.35 = -v_ball / - 6.26
-v_ball = 0.35 × (- 6.26)
-v_ball = -2.191 m/s
v_ball = 2.191 m/s
to get the height;
v² = 2gh
h = v² / 2g
we substitute
h = (2.191)² / 2×9.8
h = 4.800481 / 19.6
h = 0.2449 m
Therefore, the required height is 0.2449 m only