A pilot is planning his flight to an airport which is 400km southeast of his starting location. His plane flies at 250km/h but a wind of 20km/h is blowing from 30° West of South. What heading should he choose for the plane? What is his resultant velocity?

The equation describes the rate of change of the amount of the substance, which decreases by 6.8% per day.

The equation dN/dt = -0.068N represents the rate of change of the amount of the chemical substance, where N represents the amount of the substance and t represents the number of days. The negative sign indicates that the amount of the substance is decreasing over time.

By solving this differential equation, we can determine the behavior of the substance's decay. Integrating both sides of the equation gives:

∫ dN/N = ∫ -0.068 dt

Applying the integral to both sides, we get:

ln|N| = -0.068t + C

Here, C is the constant of integration. By exponentiating both sides, we find:

|N| = e^(-0.068t + C)

Since the absolute value of N is used, both positive and negative values are possible for N. The constant C represents the initial condition, or the amount of the substance at t = 0 (N₀). Therefore, the general solution for the decay of the substance is:

N = ±e^(-0.068t + C)

This equation provides the general behavior of the amount of the chemical substance as it decays over time, with the constant C and the initial condition determining the specific values for N at different time points.

Learn more about differential equation here:

https://brainly.com/question/32538700

#SPJ11

The first three coefficients are calculated as CO = 1^(3/10), C1 = (3/10) * 1^(-7/10), and C2 = C3 = 0. The interval of convergence for the power series representation of f(x) = 2.0.3 is (-∞, +∞), meaning it converges for all real values of x.

The power series representation of a function involves expressing the function as an infinite sum of terms, where each term is a multiple of x raised to a power. In this case, the function f(x) = 2.0.3 is a constant function with the value of 2.0.3 for all x. To represent it as a power series, we need to find the coefficients cn.

The coefficients cn can be calculated by substituting the corresponding values of n into the formula cn = f^(n)(a) / n!, where f^(n)(a) represents the nth derivative of f(x) evaluated at a, and n! denotes the factorial of n. In this case, since f(x) is a constant function, all its derivatives are zero except for the zeroth derivative, which is simply the function itself.

Calculating the coefficients:

CO: Plugging in n = 0, we get CO = f^(0)(1) / 0! = f(1) = 2.0.3 = 1.

C1: Substituting n = 1, we have C1 = f^(1)(1) / 1! = 0.

C2 and C3: As the function f(x) is a constant, all higher-order derivatives are zero, so C2 = C3 = 0.

The interval of convergence of a power series represents the range of x values for which the series converges. In this case, since all coefficients after C1 are zero, the power series reduces to a constant term, and it converges for all x.

Therefore, the interval of convergence for the power series representation of f(x) = 2.0.3 is (-∞, +∞), meaning it converges for all real values of x.

Learn more about interval of convergence here:

https://brainly.com/question/31972874

#SPJ11

(a) A circle divided into various components: This is called a Pie Chart or a Circle Chart.

It is used to represent data as parts of a whole. Each component of the circle represents a proportion or percentage of the total.

(b) Each bar on the chart is further sub-divided into parts: This is called a Stacked Bar Chart. It is used to show the composition of a category or group, where each bar represents the total value and is divided into sub-categories.

(c) A chart consisting of a set of vertical bars with no gaps in between them: This is called a Histogram. It is used to display the distribution of continuous data or grouped data. The bars are positioned side by side with no gaps, and the height of each bar represents the frequency or count of data points falling within a specific range.

(d) A continuous smooth curve obtained by connecting the mid-points of the data: This is called a Line Graph or a Line Chart. It is used to show the trend or relationship between two variables over time or a continuous range. The data points are connected by a line, and the curve represents the overall pattern or trend.

(e) Two or more sets of interrelated data are represented as separate bars: This is called a Grouped Bar Chart or a Clustered Bar Chart. It is used to compare multiple sets of data across different categories. Each bar represents a category, and the different sets of data are represented by separate bars within each category, allowing for easy comparison between the groups.

Learn more about percentage here:

https://brainly.com/question/16797504

#SPJ11

To find the number of music players supplied at a price of 150, we substitute x = 150 into the supply function q = 60e^(0.0054x) and round the result to the nearest thousand. The marginal supply is found by taking the derivative of the supply function with respect to x. The best interpretation of the derivative is the rate of change of the quantity supplied as the price increases.

1. To find the number of music players supplied at a price of 150, we substitute x = 150 into the supply function q = 60e^(0.0054x):

  q(150) = 60e^(0.0054 * 150) ≈ 60e^0.81 ≈ 60 * 2.246 ≈ 134.76 ≈ 135 (rounded to the nearest thousand).

2. The marginal supply is found by taking the derivative of the supply function with respect to x:

  Marginal supply(x) = d/dx(60e^(0.0054x)) = 0.0054 * 60e^(0.0054x) = 0.324e^(0.0054x).

3. The best interpretation of the derivative (marginal supply) is the rate of change of the quantity supplied as the price increases. In other words, it represents how many additional units of the music player will be supplied for each unit increase in price.

Therefore, at a price of 150 dollars, approximately 135 thousand units of music players will be supplied. The marginal supply function is given by 0.324e^(0.0054x), and its interpretation is the rate of change of the quantity supplied as the price increases.

Learn more about derivative :

https://brainly.com/question/29020856

#SPJ11

17. The curve defined by x = 13 - 31 and y = 12 - 3 does not have any horizontal or vertical tangents since the equations do not vary with respect to x or y.

18. The given equation x = p³ - 31 and y = (empty) does not provide enough information to determine any points on the curve or the presence of horizontal or vertical tangents as the equation for y is missing.

17. The given curve is defined by x = 13 - 31 and y = 12 - 3. To find the points where the tangent is horizontal or vertical, we need to determine the values of x and y that satisfy these conditions. However, there seems to be some confusion in the provided equations as they do not represent a valid curve. It is unclear what the intended equation is for the curve, and without further information, we cannot determine the points where the tangent is horizontal or vertical.

18. The given curve is defined by x = p3 - 31 and y = ?. Similarly to the previous case, the equation for the curve is incomplete, as the value of y is not provided. Therefore, we cannot determine the points where the tangent is horizontal or vertical for this curve. If you have additional information or clarification regarding the equations, please provide them so that we can assist you further.

Without the complete and accurate equations for the curves, it is not possible to identify the points where the tangent is horizontal or vertical. Graphing the curve using a graphing device or providing additional information would be necessary to analyze the curve and determine those points accurately.

Learn more about tangent here:

https://brainly.com/question/31617205

#SPJ11

Using theorems related to inverse functions, the value of (F-1)(3) is :

(F-1)(3) = (2 - √30)/3^(1/3)

To find (F-1)(3), we first need to find the inverse of f(x).
To do this, we switch x and y in the equation f(x) = x^3 + 2x + 1:
x = y^3 + 2y + 1
Then we solve for y:
y^3 + 2y + 1 - x = 0

Using the cubic formula or factoring techniques, we can solve for y:

y = (-2 + √(4-4(1)(1-x^3)))/2(1)  OR  y = (-2 - √(4-4(1)(1-x^3)))/2(1)

Simplifying, we get:

y = (-1 + √(x^3 + 3))/x^(1/3)  OR  y = (-1 - √(x^3 + 3))/x^(1/3)

Thus, the inverse function of f(x) is:

F-1(x) = (-1 + √(x^3 + 3))/x^(1/3)  OR  F-1(x) = (-1 - √(x^3 + 3))/x^(1/3)

Now, to find (F-1)(3), we plug in x = 3 into the inverse function:

F-1(3) = (-1 + √(3^3 + 3))/3^(1/3)  OR  F-1(3) = (-1 - √(3^3 + 3))/3^(1/3)

Simplifying, we get:

F-1(3) = (2 + √30)/3^(1/3)  OR  F-1(3) = (2 - √30)/3^(1/3)

Therefore, (F-1)(3) = (2 + √30)/3^(1/3)  OR  (F-1)(3) = (2 - √30)/3^(1/3).

This solution involves the use of theorems related to inverse functions, including switching x and y in the original equation and solving for y, as well as the cubic formula or factoring techniques to solve for y.

To learn more about inverse functions visit : https://brainly.com/question/3831584

#SPJ11

(a). The curl of F is given by curl F = (4e^7z) i - 4 j - 4x^3 k.

(b). The work done by the vector field F along the closed curve of the circle is zero.

To find the curl of the vector field

[tex]F = (42 + 4x^4) i + (4y + 62 + 6sin(y)) j + (4x + 6y + 4e^{7z})[/tex]k, we'll compute the curl as follows:

(a) Curl F:

The curl of a vector field F = P i + Q j + R k is given by the following determinant:

curl F = (∂R/∂y - ∂Q/∂z) i + (∂P/∂z - ∂R/∂x) j + (∂Q/∂x - ∂P/∂y) k

Let's compute the partial derivatives:

∂P/∂x = [tex]16x^3[/tex]

∂Q/∂y = 4

∂R/∂z = [tex]4e^{7z[/tex]

∂Q/∂z = 0 (as there is no z term in Q)

∂R/∂x = 4

∂P/∂y = 0 (as there is no y term in P)

Now, we can calculate the components of the curl:

curl F =[tex](4e^{7z} - 0) i + (0 - 4) j + (0 - 4x^3) k[/tex]

   = [tex](4e^{7z}) i - 4 j - 4x^3 k[/tex]

(b) Regarding the line integral ∮ F · dr, where r is the circle

[tex](x - 3)^2 + (y - 5)^2 = 25[/tex] :

Since the curl of F is zero (curl F = 0), it implies that F is a conservative vector field. This means that the line integral ∮ F · dr around any closed curve will be zero.

For the circle given by [tex](x - 3)^2 + (y - 5)^2 = 25[/tex], it is a closed curve. Therefore, we can conclude that the line integral ∮ F · dr around this circle is zero.

To know more about vector field refer here

https://brainly.com/question/14122594#

#SPJ11

answer:

To find the area of the sector determined by an arc with a measure of 50° in a circle with a radius of 10, we can use the formula for the area of a sector:

Area of Sector = (θ/360°) * π * r^2

where θ is the central angle in degrees, π is a mathematical constant approximately equal to 3.14159, and r is the radius of the circle.

Plugging in the given values:

θ = 50°

r = 10

Area of Sector = (50°/360°) * 3.14159 * (10)^2

Area of Sector ≈ (0.1389) * 3.14159 * 100

Area of Sector ≈ 43.98 square units

Rounded to the nearest tenth, the area of the sector determined by the 50° arc in a circle with a radius of 10 is approximately 44.0 square units.

In(x) is given by:y = C1 x^[{1 + i√3}/2] + C2 x^[{1 - i√3}/2]; where C1 and C2 are constants of integration. The solution to the given initial value problem is given by:y = (1/3)e^(3x) + 2e^(2x) - (1/3)e^(-x) + (1/3)x - (4/3)'

1. Find the G.S. ......... Xy' + y = x’y?

In(x)To find the General Solution (G.S.) of the differential equation xy' + y = x'y In(x), we shall make use of the Integrating factor method given by the following steps:

First, obtain the Integrating factor which is the exponential function of the integral of coefficient of y which is given by ∫(1/x)dx = ln(x). So, I.F. = exp[∫(1/x)dx] = exp[ln(x)] = x.

Secondly, multiply both sides of the given differential equation by I.F. as shown below:x(xy') + xy = x(x'y)I.F. * xy' + I.F. * y = I.F. * x'yx²y' + xy = x'y

Let us re-arrange the above equation as follows:x^2y' - x'y + xy = 0To solve for y, we shall assume that y = x^k, where k is a constant.Then, y' = kx^(k-1) and y'' = k(k-1)x^(k-2)

Substituting into the above equation, we obtain: k(k-1)x^k - kx^k + x^(k+1) = 0

Simplifying the above equation, we get: x^k (k^2 - k + 1) = 0Since x ≠ 0, then k^2 - k + 1 = 0 which implies that k = [-b ± √(b^2 - 4ac)]/2a

Therefore,k = [1 ± √(1 - 4(1)(1))]/2(1)k = [1 ± √(-3)]/2

Hence, we have two cases:

Case 1: k1 = [1 + i√3]/2; andy1 = x^(k1) = x^[{1 + i√3}/2]

Case 2: k2 = [1 - i√3]/2; andy2 = x^(k2) = x^[{1 - i√3}/2]

Therefore, the General Solution (G.S.) of the differential equation xy' + y = x'y

In(x) is given by:y = C1 x^[{1 + i√3}/2] + C2 x^[{1 - i√3}/2]; where C1 and C2 are constants of integration.

2. Solve the L.V.P. - y - 5y +6y=(2x-5)e, (0) = 1, y(0) = 3

First, we obtain the characteristic equation as shown below:r^2 - 5r + 6 = 0

Solving the quadratic equation, we get:r = (5 ± √(5^2 - 4(1)(6)))/2(1)r = (5 ± √(1))/2r1 = 3 and r2 = 2

Therefore, the Complementary Function (C.F.) of the given differential equation is given by:y_c = C1 e^(3x) + C2 e^(2x)

Next, we assume that y_p = Ae^(mx) + Bx + C; where A, B, and C are constants to be determined, and m is the root of the characteristic equation that is also a coefficient of x in the non-homogeneous part of the differential equation.

Then,y'_p = Ame^(mx) + B; andy''_p = Am² e^(mx)

Therefore, substituting into the given differential equation, we obtain:Am² [tex]e^(mx) + Bm e^(mx) - 5(Ame^(mx) + B) + 6(Ae^(mx)[/tex] + Bx + C) = (2x - 5)e

Simplifying, we obtain:(A m² + (B - 5A) m + 6A)e^(mx) + 6Bx + (6C - 5B) = (2x - 5)e

Therefore, comparing coefficients, we get:6B = 2, therefore B = 1/3;6C - 5B = -5, therefore C = -4/3;A m² + (B - 5A) m + 6A = 0,

Therefore, m = -1;A - 4A + 2/3 = -4/3, therefore A = -1/3

Therefore, the Particular Integral (P.I.) of the given differential equation is given by:y_p = (-1/3)e + (1/3)x - (4/3)

Hence, the General Solution (G.S.) of the given differential equation is given by:y = y_c + y_p = C1[tex]e^(3x) + C2 e^(2x)[/tex]- (1/3)[tex]e^(-x)[/tex] + (1/3)x - (4/3)

Since (0) = 1, we substitute into the above equation to get:C1 + C2 - (4/3) = 1C1 + C2 = 1 + (4/3)C1 + C2 = 7/3

Solving the above simultaneous equation, we obtain:C1 = 1/3 and C2 = 2

Therefore, the solution to the given initial value problem is given by:y = (1/3)[tex]e^(3x) + 2e^(2x) - (1/3)e^(-x)[/tex]+ (1/3)x - (4/3)

To know more about differential equation

https://brainly.com/question/25731911

#SPJ11

(A) N'(x) increasing: (10, 27.78)

(B) N'(x) decreasing: (27.78, 40)

(C) Average of inflection points: 27.78

(D) Maximum rate of change of sales: x ≈ 27.78

(A) To determine when the rate of change of sales N'(x) is increasing, we need to find the intervals where the derivative N'(x) is positive.

First, let's find the derivative of N(x):

N'(x) = d/dx (-3x^3 + 250x^2 - 3200x + 17000)

= -9x^2 + 500x - 3200

To find the intervals where N'(x) is increasing, we need to find the intervals where N''(x) > 0, where N''(x) is the second derivative of N(x).

Taking the derivative of N'(x):

N''(x) = d/dx (-9x^2 + 500x - 3200)

= -18x + 500

To find when N''(x) > 0, we solve the inequality -18x + 500 > 0:

-18x > -500

x < 500/18

x < 27.78

Therefore, the rate of change of sales N'(x) is increasing for the interval (10, 27.78) in interval notation.

(B) To determine when the rate of change of sales N'(x) is decreasing, we need to find the intervals where the derivative N'(x) is negative.

From the previous calculation, we know that N'(x) = -9x^2 + 500x - 3200.

To find the intervals where N'(x) is decreasing, we need to find the intervals where N''(x) < 0.

N''(x) = -18x + 500

To find when N''(x) < 0, we solve the inequality -18x + 500 < 0:

-18x < -500

x > 500/18

x > 27.78

Therefore, the rate of change of sales N'(x) is decreasing for the interval (27.78, 40) in interval notation.

(C) To find the inflection points of N(x), we need to find when the second derivative N''(x) changes sign.

From our previous calculations, we know that N''(x) = -18x + 500.

To find the inflection points, we set N''(x) = 0 and solve for x:

-18x + 500 = 0

-18x = -500

x = 500/18

x ≈ 27.78

Since N''(x) is linear, it changes sign at x = 27.78, which is the inflection point of N(x).

(D) To find the maximum rate of change of sales, we look for the maximum of the derivative N'(x).

From our previous calculations, we have N'(x) = -9x^2 + 500x - 3200.

To find the maximum, we take the derivative of N'(x) and set it equal to zero:

N''(x) = -18x + 500 = 0

-18x = -500

x = 500/18

x ≈ 27.78

Therefore, the maximum rate of change of sales occurs at x ≈ 27.78.

Read more about rates at:

brainly.com/question/18576593

#SPJ11

The expression that is another way of representing the given product is -8 * (-9)

From the question, we have the following parameters that can be used in our computation:

Product = -9 * (-8)

The product can be rewritten by interchanging the positions of -9 and -8

using the above as a guide, we have the following:

Product = -8 * (-9)

Hence, the expression that is another way of representing the given product is -8 * (-9)

Read more about expression at

https://brainly.com/question/15775046

#SPJ1

To approximate the given integral using Riemann sums, we need to divide the region of integration into smaller  sub-rectangles and evaluate the function at the midpoints of each  sub-rectangles.

Given that n = 6 and m = 3, we'll divide the region into 6 subintervals in the x-direction and 3 subintervals in the y-direction.

Let's proceed with the calculations:

Determine the width of each sub-interval in the x-direction:

Δx = (b - a) / n = (5 - (-3)) / 6 = 8 / 6 = 4/3

Determine the width of each sub-interval in the y-direction:

Δy = (d - c) / m = (8 - 7) / 3 = 1 / 3

Construct the sub-rectangles and find the midpoint of each  sub-rectangles:

Subintervals in the x-direction: [-3, -3 + 4/3], [-3 + 4/3, -3 + 8/3], [-3 + 8/3, -3 + 4], [-3 + 4, -3 + 16/3], [-3 + 16/3, -3 + 20/3], [-3 + 20/3, 5]

Midpoints in the x-direction: [-3 + 2/3], [-3 + 4/3 + 2/3], [-3 + 8/3 + 2/3], [-3 + 4 + 2/3], [-3 + 16/3 + 2/3], [-3 + 20/3 + 2/3]

Subintervals in the y-direction: [7, 7 + 1/3], [7 + 1/3, 7 + 2/3], [7 + 2/3, 8]

Midpoints in the y-direction: [7 + 1/6], [7 + 1/3 + 1/6], [7 + 2/3 + 1/6]

Evaluate the function at the midpoints of each  sub-rectangles and multiply by the corresponding  sub-rectangles area:

Approximation of the integral = Σ f(xi, yj) * ΔA

where Σ represents the sum over all  sub-rectangles, f(xi, yj) is the function evaluated at the midpoint of the  sub-rectangles, and ΔA is the area of the sub-rectangles.

Now, substituting the function f(x, y) = (#*+33°y + 3xy? +x") into the approximation formula, we can proceed with the calculations.

Since R = (3,5] × [7,8], which means x ranges from 3 to 5 and y ranges from 7 to 8, we only need to consider the  sub-rectangles that intersect with this region.

Let's calculate the approximation:

Approximation of the integral = f(x1, y1) * ΔA1 + f(x2, y1) * ΔA2 + f(x3, y1) * ΔA3

+ f(x1, y2) * ΔA4 + f(x2, y2) * ΔA5 + f(x3, y2) * ΔA6

where ΔA1, ΔA2, ΔA3, ΔA4, ΔA5, ΔA6 are the areas of the corresponding  sub-rectangles.

Note: Without the specific function values and the definition of the region R, it is not possible to provide the exact calculations and the approximation result. The above steps outline the general procedure to approximate the integral using Riemann sums, but the actual numerical values require the specific function and region information.

To learn more about  Riemann sums

https://brainly.com/question/31396540

#SPJ11

Using logarithmic differentiation, the derivative of the equation y = Y * 3^(4√(√(√(x^2+1)))) * (4x+5)^7 can be found. The result is given by y' = y * [(4√(√(√(x^2+1))))' * ln(3) + (7(4x+5))' * ln(4x+5) + (ln(Y))'], where ( )' denotes the derivative of the expression within the parentheses.

To find the derivative of the equation y = Y * 3^(4√(√(√(x^2+1)))) * (4x+5)^7 using logarithmic differentiation, we take the natural logarithm of both sides: ln(y) = ln(Y) + (4√(√(√(x^2+1)))) * ln(3) + 7 * ln(4x+5).

Next, we differentiate both sides with respect to x. On the left side, we have (ln(y))', which is equal to y'/y by the chain rule. On the right side, we differentiate each term separately.

The derivative of ln(Y) with respect to x is 0, since Y is a constant. For the term (4√(√(√(x^2+1)))), we use the chain rule and obtain [(4√(√(√(x^2+1))))' * ln(3)]. Similarly, for the term (4x+5)^7, the derivative is [(7(4x+5))' * ln(4x+5)].

Combining these derivatives, we get y' = y * [(4√(√(√(x^2+1))))' * ln(3) + (7(4x+5))' * ln(4x+5) + (ln(Y))'].

By applying logarithmic differentiation, we obtain the derivative of the given equation without using the Product Rule or Quotient Rule. The resulting expression allows us to calculate the derivative for different values of x and the given constants Y, ln(3), and ln(4x+5).

Learn more about derivative here:

https://brainly.com/question/29144258

#SPJ11

We are asked to sketch a triangular base container with dimensions that can hold exactly one liter of liquid.

To sketch a triangular base container that can hold one liter of liquid, we need to consider its dimensions. Let's assume the base of the container is an equilateral triangle with side length 's' and the height of the container is 'h'.

To calculate the volume of the container, we need to find the area of the base and multiply it by the height. The area of an equilateral triangle is given by (sqrt(3)/4) * s^2, so the volume of the container is V = (sqrt(3)/4) * s^2 * h. Since we want the volume to be one liter (1000 cm^3), we set this equal to 1000 and solve for 'h' in terms of 's': h = [tex](4000 / (sqrt(3) * s^2)).[/tex]

The surface area of the container consists of the area of the base and the area of the three identical triangular sides. The area of the base is [tex](sqrt(3)/4) * s^2[/tex], and each triangular side has an area of (s * sqrt(3) * s) / 2 = [tex](sqrt(3)/2) * s^2[/tex]. Therefore, the total surface area is A = (sqrt(3)/4) * s^2 + 3 * (sqrt(3)/2) * s^2 = (5sqrt(3)/4) * s^2.

Learn more about equilateral here:

https://brainly.com/question/2456591

#SPJ11

The company should produce and sell 416 laptops weekly to maximize its weekly profit.

The given computing company's weekly profit function isP(x) = -0.007x³ – 0.1x² + 500x – 700. The number of laptops produced and sold weekly is x units. To maximize the weekly profit of the company, we need to find the value of x at which the profit function P(x) attains its maximum value.

Now, differentiate the given function, we get:P′(x) = (-0.007) * 3x² – 0.1 * 2x + 500= -0.021x² – 0.2x + 500To find the value of x, we set P′(x) = 0 and solve for x.

So,-0.021x² – 0.2x + 500 = 0

Multiplying both sides by -1, we get0.021x² + 0.2x - 500 = 0.

To solve this quadratic equation, we can use the quadratic formula: x = (-b ± √(b² - 4ac)) / 2a where a = 0.021, b = 0.2, and c = -500

Substituting the values of a, b, and c in the above formula, we get: x = (-0.2 ± √(0.2² - 4 * 0.021 * (-500))) / 2 * 0.021≈ 416.1 or -2385.7

Since the number of laptops produced and sold cannot be negative, we take the positive root x = 416.1 (approx.) as the required value.

Therefore, the company should produce and sell 416 laptops weekly to maximize its weekly profit.

To know more about profit click on below link

https://brainly.com/question/32385889#

#SPJ11

The solution to the initial value problem is: t(t) = [tex]500t - 0.05t^2 + 250[/tex].

In this scenario, the candy maker produces 500 pounds of candy each week and the family uses 10% of the candy available each week. Let t be the amount of candy available at time t.

The rate of change of candy present, d(t)/dt, can be expressed as the difference between the rate of candy production and the rate of candy consumption. Confectionery production rate is constant at 500 pounds per week. The candy consumption rate is 10% of the existing candy and can be expressed as 0.1 * t. So the differential equation that determines the amount of candy present over time is:

[tex]d(t)/dt = 500 - 0.1 * t[/tex]

The initial condition is t(0) = 250 pounds. This means you have 250 pounds of candy to start with.

Separate and combine variables to solve the initial value problem. Rearranging the equation gives:

[tex]d(t) = (500 - 0.1 * t) * dt[/tex]

Integrating both aspects gives:

[tex]∫d(t) = \int\limits {(500 - 0.1 * t) * dt}[/tex]. Integrating the left-hand side gives t as the constant of integration. On the right, we can use the power integration rule to find the inverse derivative of (500 - 0.1 * t).

Integrating and evaluating the bounds yields the following solutions:

[tex]t(t) = 500t - 0.05t^2 + C[/tex]

You can solve for the constant of integration C using the initial condition t(0) = 250 pounds. After substituting the values:

[tex]250 = 500 * 0 - 0.05 * 0^2 + C[/tex]

C=250. So the solution for the initial value problem would be:

[tex]t(t) = 500t - 0.05t^2 + 250[/tex]

This equation describes the amount of candy available at a given time t, taking into account candy production rates and family consumption rates. 

Learn more about initial value problem here:
https://brainly.com/question/30466257

#SPJ11

The solution to the system of linear equations is:

x = 26/17

y = -28/17

To solve the system of linear equations using the elimination method, we'll eliminate the variable y by adding the two equations together. Here are the steps:

Write down the two equations:

2x - 3y = 8 ...(Equation 1)

5x + y = 6 ...(Equation 2)

Multiply Equation 2 by 3 to make the coefficients of y in both equations cancel each other out:

3 × (5x + y) = 3 × 6

15x + 3y = 18 ...(Equation 3)

Add Equation 1 and Equation 3 together to eliminate y:

(2x - 3y) + (15x + 3y) = 8 + 18

2x + 15x - 3y + 3y = 26

17x = 26

Solve for x by dividing both sides of the equation by 17:

17x/17 = 26/17

x = 26/17

Substitute the value of x back into one of the original equations to solve for y.

Let's use Equation 2:

5(26/17) + y = 6

130/17 + y = 6

Solve for y by subtracting 130/17 from both sides of the equation:

y = 6 - 130/17

Simplify the right side of the equation:

y = -28/17

So, the solution to the system of linear equations is:

x = 26/17

y = -28/17

Learn more about system of linear equations click;

https://brainly.com/question/20379472

#SPJ1

The radius of convergence for the given series is infinity.

The given series can be written as ∑(2n)!x^n / (n^n), n=1 to infinity. To find the radius of convergence, we can use the ratio test.

Applying the ratio test, we have:

lim |a_n+1 / a_n| = lim [(2n+2)!x^(n+1) / ((n+1)^(n+1))] / [(2n)!x^n / (n^n)]

= lim (2n+2)(2n+1)x / (n+1)n

= lim (4x/3) * ((2n+1)/n) * ((n+1)/(n+2))

As n approaches infinity, the second and third terms in the above limit approach 1, giving us:

lim |a_n+1 / a_n| = (4x/3) * 1 * 1 = 4x/3

For the series to converge, the above limit must be less than 1. Solving for x, we get:

4x/3 &lt; 1

x &lt; 3/4

Therefore, the radius of convergence is less than or equal to 3/4.

However, we also need to consider the endpoint x=3/4. When x=3/4, the series becomes:

∑(2n)! (3/4)^n / (n^n)

This series converges, because the ratio of consecutive terms approaches a value less than 1. Therefore, the radius of convergence is infinity.

Learn more about consecutive terms here.

https://brainly.com/questions/14171064

#SPJ11

a. The  Laplace Transform of the given function is  L{3t^2 + 5e^(4t) + sin(2t)} = 6 / s^3 + 5 / (s - 4) + 2 / (s^2 + 4)

b. The Inverse Laplace of the given function is L^-1{8 / (s^4 - 16)} = 2sin(2t) + e^(2t) + 5e^(-2t)

a. To find the Laplace transform of the function 3t^2 + 5e^(4t) + sin(2t), we can use the linearity property and the standard Laplace transform formulas.

Using the linearity property, we can take the Laplace transform of each term separately:

L{3t^2} = 3 * L{t^2} = 3 * (2! / s^3) = 6 / s^3

L{5e^(4t)} = 5 * L{e^(4t)} = 5 / (s - 4)

L{sin(2t)} = 2 / (s^2 + 4)

Putting it all together:

L{3t^2 + 5e^(4t) + sin(2t)} = 6 / s^3 + 5 / (s - 4) + 2 / (s^2 + 4)

b. To find the inverse Laplace transform of the function 8 / (s^4 - 16), we can use partial fraction decomposition and the standard inverse Laplace transform formulas.

First, we factor the denominator:

s^4 - 16 = (s^2 + 4)(s^2 - 4) = (s^2 + 4)(s - 2)(s + 2)

Now, we can decompose the fraction:

8 / (s^4 - 16) = A / (s^2 + 4) + B / (s - 2) + C / (s + 2)

To find the values of A, B, and C, we can multiply both sides by the denominator and equate the coefficients of like powers of s. After solving for A, B, and C, let's say we find:

A = 2, B = 1, C = 5

Now, we can rewrite the fraction:

8 / (s^4 - 16) = 2 / (s^2 + 4) + 1 / (s - 2) + 5 / (s + 2)

Using the standard inverse Laplace transform formulas, the inverse Laplace transform of each term can be found:

L^-1{2 / (s^2 + 4)} = 2sin(2t)

L^-1{1 / (s - 2)} = e^(2t)

L^-1{5 / (s + 2)} = 5e^(-2t)

Putting it all together:

L^-1{8 / (s^4 - 16)} = 2sin(2t) + e^(2t) + 5e^(-2t)

To know more about inverse Laplace transform refer here:

brainly.com/question/1675085

#SPJ11

The derivatives of the given functions can be computed using differentiation rules. For function f(x) = x+3ex - sin(x), the derivative is 1+ 3ex-cos(x),  f(x)=sin(x² + 5) + ln(x² + 5) the derivative is 2xcos(x² + 5) + (2x / (x² + 5), f(x) = asin(x) + atan(2x), the derivative is 1/√(1 - x²) + 2 / (1 + 4x²).

To compute the derivative of the given functions, we apply differentiation rules and techniques.

a. For f(x) = x + 3ex - sin(x), we differentiate each term separately. The derivative of x with respect to x is 1. The derivative of 3ex with respect to x is 3ex. The derivative of sin(x) with respect to x is -cos(x). Therefore, the derivative of f(x) is 1 + 3ex - cos(x).

b. For f(x) = sin(x² + 5) + ln(x² + 5), we use the chain rule and derivative of the natural logarithm. The derivative of sin(x² + 5) with respect to x is cos(x² + 5) times the derivative of the inner function, which is 2x. The derivative of ln(x² + 5) with respect to x is (2x / (x² + 5)). Therefore, the derivative of f(x) is 2xcos(x² + 5) + (2x / (x² + 5)).

c. For f(x) = asin(x) + atan(2x), we use the derivative of the inverse trigonometric functions. The derivative of asin(x) with respect to x is 1 / √(1 - x²) using the derivative formula of arcsine. The derivative of atan(2x) with respect to x is 2 / (1 + 4x²) using the derivative formula of arctangent. Therefore, the derivative of f(x) is 1 / √(1 - x²) + 2 / (1 + 4x²).

By applying the differentiation rules and formulas, we can find the derivatives of the given functions.

Learn more about derivatives here:

https://brainly.com/question/25324584

#SPJ11

The volume of the figure (1) is 942 cubic inches.

1) Given that, height = 13 inches and radius = 6 inches.

Here, the volume of the figure = Volume of cylinder + Volume of hemisphere

= πr²h+2/3 πr³

= π(r²h+2/3 r³)

= 3.14 (6²×13+ 2/3 ×6³)

= 3.14 (156+ 144)

= 3.14×300

= 942 cubic inches

So, the volume is 942 cubic inches.

2) Volume = 4×4×5+4×4×6

= 176 cubic inches

Therefore, the volume of the figure (1) is 942 cubic inches.

To learn more about the volume visit:

https://brainly.com/question/13338592.

#SPJ1

The boutique charges approximately $46.17 for each wallet and $43.90 for each belt.To determine the price of each item, we can set up a system of equations based on the given information.

From the given information, we know that last month the boutique sold 49 wallets and 73 belts for a total of $5,466. This can be expressed as the equation: 49w + 73b = 5,466.

Similarly, this month the boutique sold 100 wallets and 32 belts for a total of $6,008, which can be expressed as the equation:

100w + 32b = 6,008.

To solve this system of equations, we can use various methods such as substitution or elimination. Let's use the elimination method to find the values of "w" and "b."

Multiplying the first equation by 100 and the second equation by 49, we get:

4900w + 7300b = 546,600

4900w + 1568b = 294,992

Subtracting the second equation from the first, we have:

5732b = 251,608

b = 43.90

Substituting the value of "b" back into one of the original equations, let's use the first equation:

49w + 73(43.90) = 5,466

49w + 3,202.70 = 5,466

49w = 2,263.30

w ≈ 46.17.

For more such questions on Boutique charges:

https://brainly.com/question/13567712

#SPJ8

a) To factor the quadratic expression x^2 - x - 20, let's first check if there is a greatest common factor (GCF) that can be factored out. In this case, there is no common factor other than 1.

Next, we need to find two numbers whose product is -20 and whose sum is -1 (coefficient of the x-term). By inspecting the factors of 20, we can determine that -5 and 4 satisfy these conditions.

Therefore, we can rewrite the quadratic expression as follows: x^2 - x - 20 = (x - 5)(x + 4)

b) For the quadratic expression x^2 - 13x + 42, let's again check if there is a GCF that can be factored out. In this case, there is no common factor other than 1.

Next, we need to find two numbers whose product is 42 and whose sum is -13 (coefficient of the x-term). By inspecting the factors of 42, we can determine that -6 and -7 satisfy these conditions.

Therefore, we can rewrite the quadratic expression as follows: x^2 - 13x + 42 = (x - 6)(x - 7)

Learn more about quadratic expression here : brainly.com/question/10025464

#SPJ11

Answer:

Step-by-step explanation:

the sequence is arithmetic it goes up consistently

You put 15 where n is so the problem would look like an=32(0.98)^n-1

The pants converge

His pants will be very long it is not reasonable

To find functions f and g such that h = gof, we need to determine how the composition of these functions can produce [tex]h(x) = √(2 - 1).[/tex]

Let's choose [tex]f(x) = √x and g(x) = 2 - x.[/tex] Now we can check if gof = h.

First, compute gof:

[tex]gof(x) = g(f(x)) = g(√x) = 2 - √x.[/tex]

Now compare gof with h:

[tex]gof(x) = 2 - √x = h(x) = √(2 - 1).[/tex]

We can see that gof matches h, so the functions [tex]f(x) = √x and g(x) = 2 - x[/tex]satisfy the condition h = gof.

learn more about:-  functions here

https://brainly.com/question/31062578

#SPJ11

The limit of the given expression as h approaches 6 is -11/6. This means that as h gets arbitrarily close to 6, the value of the expression approaches Answer : -11/6.

To find the limit, we first simplified the expression by combining like terms and distributing the negative sign. Then, we substituted the value h = 6 into the expression. Finally, we evaluated the resulting expression to obtain -11/6 as the limit.

To evaluate the limit, let's rewrite the expression in a more readable format:

lim (h -> 6) [(12 - 100)/(4 + 2 + 30t - 100(6 - h))]

We can simplify the expression:

lim (h -> 6) [-88/(6h + 112 - 100)]

Now, let's substitute the value of h = 6 into the expression:

lim (h -> 6) [-88/(36 + 112 - 100)]

= lim (h -> 6) [-88/48]

= -88/48

This expression can be further simplified:

-88/48 = -11/6

Therefore, the limit of the given expression as h approaches 6 is -11/6.

Learn more about  limit : brainly.com/question/12211820

#SPJ11

The point with polar coordinates (3, -3) can be expressed in Cartesian coordinates as (-3√2/2, -3√2/2) and in exponential form as 3e^(i(-3π/4)).

To plot the point with polar coordinates (3, -3), we start at the origin and move 3 units in the direction of the angle -3 radians (or -3π/4). This gives us the point (-3√2/2, -3√2/2) in Cartesian coordinates.

Alternatively, we can express the point in exponential form using Euler's formula: r e^(iθ), where r is the magnitude and θ is the angle. In this case, the magnitude is 3 and the angle is -3π/4. So, the point can also be written as 3e^(i(-3π/4)), where e is the base of the natural logarithm and i is the imaginary unit.

Learn more about polar coordinates:

https://brainly.com/question/31904915

#SPJ11

Answer:

4 cups of dried fruit.

Step-by-step explanation:

A ratio has two or more numbers that symbolize relation to each other. Ratios are used to compare numbers, and you can compare them using division.

According to Dan’s trail mix recipe, the ratio of dried fruit to chocolate is 3:4.5. This can be simplified to 2:3 by dividing both sides by 1.5.

This means that for every 3 cups of chocolate, 2 cups of dried fruit should be used.

If 6 cups of chocolate are used, which is twice the amount in the ratio, then twice the amount of dried fruit should be used as well.

Therefore, 4 cups of dried fruit should be used if 6 cups of chocolate are used.

To determine if the series is convergent or divergent by expressing the nth partial sum Sn as a telescoping sum, we need the specific series or its general form.

Identify the specific series or its general form, usually denoted as Σ aₙ.

Express the nth partial sum Sn as a telescoping sum by writing out a few terms and observing cancellations that occur when terms are subtracted.

Simplify the expression for Sn to obtain a formula that depends only on the first term and the nth term of the series.

If the formula for Sn simplifies to a finite value as n approaches infinity, then the series is convergent, and the sum is the finite value obtained.

If the formula for Sn does not simplify to a finite value as n approaches infinity or tends to positive or negative infinity, then the series is divergent, meaning it does not have a finite sum.

learn more about:- convergent or divergent  here

https://brainly.com/question/30726405

#SPJ11