A red blood cell is placed into each of the following solutions. Indicate whether crenation, hemolysis, or neither will occur. Solution A: 3.75 % (m/v) NaCl Solution B: 1.92 % (m/v) glucose Solution C: distilled H2O Solution D: 9.03 % (m/v) glucose Solution E: 5.0% (m/v) glucose and 0.9% (m/v) NaCl

Answer:

38.493 KJ/mol

Explanation:

Equation of reaction; HBr + KOH ---> KBr + H2O

Heat evolved = mass * specific heat capacity * temperature rise

Mass of solution = density * volume

Mass = 1.00 g/ml*50 ml = 50g

Temperature rise = 31.9 - 22.7 = 9.2 °C

Heat evolved = 50 * 4.184 * 9.2 = 1924.64 J

From the equation of reaction, 1 mole of HBr reacts with 1mole of KOH to produce 1 mole of H20

Number of moles of HBr involved in the reaction = molar concentration * volume (L)

Molar concentration = 2.0 M, volume = 25 ml = 0.025 L

Number of moles = 2.0 M * 0.025 L= 0.05 moles

Therefore, 0.05 moles of HBr reacts with 0.05 moles of KOH to produce 0.05 moles of H20

Enthalpy change per mole of HBr = 1924.64 J/0.05 moles = 38492.8 J/mol = 38.493 KJ/mol

Answer:

The type of salt to be added to the water is not known from the question but no worries, I will try to give you the step by step procedure to answer any type of question similar to this.

To answer this question, we should know some facts.

1. the molar freezing point depression constant of water (Kf) = 1.86 K kg/mol

2. the molar mass of the salt if NaCl = 58.5 g/mol ; KCl = 74.5 g/mol

3. since the salt can dissociate if NaCl or KCl into two ions, the Van't Hoff factor ( i )= 2

Note that: the change in freezing point, molarity, deepression constant and van't Hoff factor are related by this formula;

                ΔTf = i Kf m

So lets take NaCl as the salt:

Molar mass = 58.5 g/mol

Van't Hoff factor = 2

1. calculate the number of moles

So we can calculate the molarity of the salt NaCl from the formula;

m = ΔTf / i Kf

m = 5 / 2 * 1.86

m = 5 / 3.72

m = 1.344 mol/kg

2. calculate the number of moles of the salt required

Next is to multiply the molarity by the mass of water. Density of water = 1kg/L

number of moles = 1.344 mol/kg * 1 Kg/L * 1 kg water

number of moles = 1.344 moles.

3. calculate the mass of the salt.

numner of moles = mass / molar mass

mass = number of moles * molar mass

mass = 1.344 * 58.5

mass = 78.624 g of NaCl salt.

You can follow these steps to solve for the type of salt you are given in the question.

Answer:

a) -7.395kJ of energy are released.

b) 125g of O₂ must react.

Explanation:

Based on the reaction:

4 Fe (s) + 3 O₂(g) → 2 Fe₂O₃ (s) ΔH = -1652 kJ

4 moles of iron with an excess of oxygen release -1652kJ of energy

a) The heat released is:

1.00g Fe (molar mass: 55.845g/mol)

1.00g × (1mol / 55.845g) = 0.0179 moles de Fe.

As 4 moles release -1652kJ, 0.0179 moles release:

0.0179 mol Fe × (-1652kJ / 4mol Fe) = -7.395kJ of energy are released.

b) As 3 moles of oxygen produce -1652kJ, 2150kJ are released when react:

2150kJ × (3 mol O₂ / 1652kJ) = 3.9 moles of O₂

As molar mass of O₂ is 32g/mol, mass of 3.9 moles of O₂ is:

3.9 mol O₂ × (32g / mol) = 125g of O₂ must react.

Complete Question

The complete question is shown on the first uploaded image

Answer:

For reaction 1

    [tex]K_{eq} = 10^{29}[/tex]

     The equilibrium position is to the right

For reaction 2

        The equilibrium position is to the left

Explanation:

Generally  [tex]pKa[/tex] is mathematically evaluated as  

[tex]pKa = pKa _ \ {left }} - pKa _ \ {right }}[/tex]

And equilibrium position [tex]K_a[/tex] is mathematically evaluated as [tex]K_{eq} = 10^\ {-pK_a}[/tex]

From the question we are told that

For reaction 1

         [tex]pKa_\ {left}} \ = 9[/tex]

        [tex]pKa_\ {right }} \ = 38[/tex]

So

       [tex]pKa = 9-38[/tex]

       [tex]pKa =-29[/tex]

So  [tex]K_{eq} = 10^{-(-29)}[/tex]

      [tex]K_a = 10^{29}[/tex]

This implies that the equilibrium position is to the right

   For reaction 2

       [tex]pKa_\ {left}} \ = 15.9[/tex]

       [tex]pKa_\ {right }} \ = 9.24[/tex]

So

       [tex]pKa = 15.9-9.24[/tex]

       [tex]pKa = 6.66[/tex]

So  [tex]K_{eq} = 10^{-(6.66)}[/tex]

      [tex]K_{eq} = 10^{-6.66}[/tex]

This implies that the equilibrium position is to the left

Answer:

All except ch4

Explanation:

NH3 N H 3 and HF can form hydrogen bonds as they have a hydrogen atom bonded to fluorine and nitrogen atoms.

Hydrogen bonds are formed between hydrogen and a highly electronegative atom such as oxygen, halogens etc.  Among the given compounds HI form hydrogen bond.

Hydrogen bond a strong bond type formed between hydrogen and an electronegative atom. Water, hydrogen halides, hydrogen sulphide etc are formed by hydrogen bonds.

Hydrogen is an electropositive atom and will easily lose an electron to a electronegative atom. Thus hydrogen bonds with atoms by sharing electrons each other where, the shared pair of electrons are attractively pulled to the electronegative atom.

Therefore, all the hydrogen bonded compounds are polar in nature.  Hydrogen bonds are strong bonds and it can be seen in proteins, DNA, and in other biomolecules.

HI or hydrogen iodide forms hydrogen bond because iodine is comparatively electronegative.

To find more on hydrogen bonds, refer here:

https://brainly.com/question/15099999

#SPJ2

Answer:

327.89g/mol

Explanation:

Step 1:

The following data were obtained from the question:

Van 't Hoff factor (i) = 1 (since the molecule is non-electrolyte)

Temperature (T) = 25°C = 25°C + 273 = 298K

Gas constant (R) = 0.0821 atm.L/Kmol

Mass of molecule = 241mg

Volume of water = 250mL

Molarity (M) =?

Osmotic pressure (Π) = 0.072 atm

Step 2:

Determination of the molarity of the molecule.

This can be obtained as follow:

Π = iMRT

0.072 = 1 x M x 0.0821 x 298

Divide both side by 0.0821 x 298

M = 0.072 / (0.0821 x 298)

M = 2.94×10¯³ mol/L

Step 3:

Determination of the number of mole of the molecule. This can be obtained as follow:

Molarity = 2.94×10¯³ mol/L

Volume of water = 250mL = 250/1000 = 0.25L

Mole of molecule =..?

Molarity = mole /Volume

2.94×10¯³ = mole / 0.25

Cross multiply

Mole of molecule = 2.94×10¯³ x 0.25

Mole of molecule = 7.35×10¯⁴ mole.

Step 4:

Determination of the molar mass of the molecule.

Mole of molecule = 7.35×10¯⁴ mole.

Mass of molecule = 241mg = 241×10¯³g

Molar mass of molecule =..?

Mole = Mass /Molar Mass

7.35×10¯⁴ = 241×10¯³/ Molar Mass

Cross multiply

7.35×10¯⁴ x molar mass = 241×10¯³

Divide both side by 7.35×10¯⁴

Molar Mass = 241×10¯³/7.35×10¯⁴

Molar Mass = 327.89g/mol

Therefore, the molar mass of the molecule is 327.89g/mol

Answer:

B.Handling the crucible directly with your hands.

D.Taking the mass of the empty crucible without the lid, but including the lid in all other mass measurements.

E.Taking the mass of all samples with the lid included.

Explanation:

When observed critically , the measures associated with the errors which could cause your percent yield to be falsely high, or even over 100% are those which increase the weight of the substance with the individual neglecting.

Handling the crucible directly with your hands,Taking the mass of the empty crucible without the lid, but including the lid in all other mass measurements and taking the mass of all samples with the lid included will all increase the weight of the substance. Instead the substance should be placed alone without any form of support or contamination.

Explanation:

We know that more is the [tex]pK_{a}[/tex] value, weaker will be the acid. Also, an acid completely dissociates into ions in an aqueous base solution when [tex]pK_{a}[/tex] of conjugate acid of base is greater than acid.

4-methylphenol [tex](CH_{3}C_{6}H_{4}OH)[/tex] ([tex]pK_{a} = 10.26[/tex]) is quite soluble in its sodium salt. In NaOH, the dissociation will be as [tex]Na^{+}[/tex] and [tex]OH^{-}[/tex] ions as NaOH is a strong base.

Therefore, 4-methylphenol will readily dissolve in NaOH solution.

As, [tex]NaHCO_{3}[/tex] is not a strong base but as 4-Methylphenol forms a sodium salt hence, it will have a low solubility as compared to NaOH.

Whereas [tex]Na_{2}CO_{3}[/tex] is not a base but when dissolved in water it shows basic character as it produces NaOH (strong base) and [tex]H_{2}CO_{3}[/tex] (weak acid). As a result, the solution gets basic. Hence, 4-methylphenol will readily dissolve in [tex]Na_{2}CO_{3}[/tex].

Answer:

A. The law of definite proportions states that all pure samples of a particular chemical compound contain the same elements combines in the same proportion by mass.

B. The law of conservation of mass states that during ordinary chemical reactions, matter can neither be created or destroyed.

Note: The full question is as follows;

A researcher placed 25.0 g of silver chloride, AgCl, in sunlight and allowed the substance to decompose completely to form silver, Ag, with the release of chlorine gas, Cl2. The gas was collected in a container during the decomposition. The researcher determined that the mass of the silver formed was 18.8 g, and the mass of the chlorine gas formed was 6.2 g. The equation for the reaction is:

2AgCl ----> 2Ag + Cl2

a. State the law of definite proportions. Then use the researcher's data to confirm the law of definite proportions. Show your calculations.

b. State the law of conservation of matter. Then use the researcher's data to confirm the conservation of matter. Show your calculations.

Explanation:

A. Mass of silver obtained from AgCl = 18.8g.

Percentage mass of silver in the chloride = (18.8/25.0) * 100 = 75.2 %

Mass of chlorine obtained from AgCl = 6.2

Percentage mass of chlorine = (6.2/25) * 100 = 24.8 %

In one mole of AgCl with a molar mass of 143.3 g/mol; mass of silver = 107.8, mass of Cl = 35.5

Percentage mass of Ag = (107.8/143.3) * 100 = 75.2%

Percentage mass of Cl = (35.5/143.3) * 100 = 24.8%

Since the percentages by mass of Ag and AgCl obtained from the sample is the same to that obtained from a mole of AgCl, the law of definite proportions which states that all pure samples of a particular chemical compound contain the same elements combined in the same proportion by mass is verified.

B. Mass of reactant; AgCl sample = 25.0

Mass of products; At = 18.8 g; Cl = 6.2 g

Sum of products masses = 18.8 + 6.2 = 25.0 g

Therefore mass of reactant = mass of products.

This is in accordance with the law of conservation of mass which states that during ordinary chemical reactions, matter is neither created nor destroyed.

y=3x + 4

Explanation:

Where 3 is the slope and 4 is the y-intercept

Answer:

The reaction produces 201.4 g of hydrogen gas and 12.2 kg of Nickel Phosphate.

Explanation:

English Translation

9.7 Kg of a 70% nickel mineral react with 8L of a 60% phosphoric acid solution and with a density of 1.36g / ml.

Solution

The problem doesn't seen to be complete as it doesn't ask a question in the end. But, we will just calculate the amount of each product expected to cover the grounds.

The balanced chemical reaction between Nickel and Phosphoric acid is given as

3Ni + 2H₃PO₄ → 3H₂ + Ni₃(PO₄)₂

We need to first obtain the limiting reagent, that is, the reagent that is used up during the reaction and is in short supply. This reagent determines the amount of products that will be formed.

Mass of nickel that is present at the start = 70% of 9.7 kg = 6.79 kg

Mass of Phosphoric acid present at the start of the reaction = 60% of (8000 mL × 1.36 g/mL) = 6528 g = 6.528 kg

Converting both of these to number of moles

Number of moles = (mass)/(Molar mass)

For nickel,

Mass = 6.79 kg = 6790 g

Molar mass = 58.6934 g/mol

Number of moles at the start = (6790/58.6934) = 115.7 moles

For Phosphoric acid

Mass = 6528 g

Molar mass = 97.994 g/mol

Number of moles = (6528/97.994) = 66.6 moles

3 moles of Ni reacts with 2 moles of H₃PO₄

From the number of moles present initially, shows that Phosphoric acid is in limited supply and is the limiting reagent.

From the stoichiometric balance of the reaction

2 moles of H₃PO₄ gives 3 moles of H₂

66.6 moles of H₃PO₄ will give (66.6×3/2) of H₂, that is, 99.9 moles of H₂.

Mass of H₂ liberated from the reaction = (Number of moles) × (molar mass) = 99.9 × 2.016 = 201.3984 g = 201.4 g

2 moles of H₃PO₄ gives 1 mole of Ni₃(PO₄)₂

66.6 moles of H₃PO₄ will give (66.6×1/2) of Ni₃(PO₄)₂, that is, 33.3 moles of Ni₃(PO₄)₂.

Mass of Ni₃(PO₄)₂ produced from the reaction = (Number of moles) × (molar mass) = 33.3 × 366.02 = 12,188.466 g = 12.2 kg

Hope this Helps!!!

Answer:

The concentration of the sodium and arsenate ions at the end of the reaction in the final solution

[Na⁺] = 0.05512 M

[HAsO₄²⁻] = 0.00185 M

[AsO₄³⁻] = 0.01714 M

Explanation:

Complete Question

A solution is made by 500.0 mL of 0.03798 M Na₂HAsO₄ with 500.0 mL of 0.03428 M NaOH. Complete the mass balance expressions for the sodium and arsenate species in the final solution.

Na₂HAsO₄ + NaOH → Na₃AsO₄ + H₂O

From the information provided in this question, we can calculate the number of moles of each reactant at the start of the reaction and we then determine which reagent is in excess and which one is the limiting reagent (in short supply and determines the amount of products to be formed)

Concentration in mol/L = (Number of moles) ÷ (Volume in L)

Number of moles = (Concentration in mol/L) × (Number of moles)

For Na₂HAsO₄

Concentration in mol/L = 0.03798 M

Volume in L = (500/1000) = 0.50 L

Number of moles = 0.03798 × 0.5 = 0.01899 mole

For NaOH

Concentration in mol/L = 0.03428 M

Volume in L = (500/1000) = 0.50 L

Number of moles = 0.03428 × 0.5 = 0.01714 mole

Since the NaOH is in short supply, it is evident that it is the limiting reagent and Na₂HAsO₄ is in excess.

Na₂HAsO₄ + NaOH → Na₃AsO₄ + H₂O

0.01899        0.01714        0           0 (At time t=0)

(0.01899 - 0.1714) | 0 → 0.01714    0.01714 (end)

0.00185  | 0 → 0.01714    0.01714 (end)  

Hence, at the end of the reaction, the following compounds have the following number of moles

Na₂HAsO₄ = 0.00185 mole

This means Na⁺ has (2×0.00185) = 0.0037 mole at the end of the reaction and (HAsO₄)²⁻ has 0.00185 mole at the end of the reaction

NaOH = 0 mole

Na₃AsO₄ = 0.01714 moles

This means Na⁺ has (3×0.01714) = 0.05142 mole at the end of the reaction and (AsO₄)³⁻ has 0.01714 mole at the end of the reaction

H₂O = 0.01714 moles

So, at the end of the reaction

Na⁺ has 0.0037 + 0.05142 = 0.05512 mole

(HAsO₄)²⁻ has 0.00185 mole

(AsO₄)³⁻ has 0.01714 mole.

And since the Total volume of the reaction setup is now 500 mL + 500 mL = 1000 mL = 1 L

Hence, the concentration of the sodium and arsenate ions at the end of the reaction is

[Na⁺] = 0.05512 M

[HAsO₄²⁻] = 0.00185 M

[AsO₄³⁻] = 0.01714 M

Hope this Helps!!!

Answer:

[tex]\rm [Na^{+}]= \text{0.055 12 mol/L}[/tex]

[tex]\rm [HAsO_{4}^{2-}] + [AsO_{4}^{3-}] + [H_{2}AsO_{4}^{-}] + [H_{3}AsO_{4}] = \text{0.018 99 mol/L}[/tex]

Explanation:

The overall equation for the reaction is  

Na₂HAsO₄ + NaOH ⟶ Na₃AsO₄ + H₂O

1. Mass balance for Na

All the Na⁺ comes from the Na₂HAsO₄ and the NaOH.

The mass balance equation for Na is  

[tex]\rm c_{Na^{+}} = 2[Na^{+}]_{Na_{2}HAsO_{4}} + [Na^{+}]_{NaOH}[/tex]

At the moment of mixing and before the reaction started, the total volume had doubled, so the concentrations of each component were halved.

[Na₂HAsO₄] = ½ × 0.037 98 =0.018 99 mol·L⁻¹

[NaOH]         = ½ × 0.034 28 = 0.017 14 mol·L⁻¹

[tex]\rm c_{Na^{+}} = 2\times 0.01899 + 0.01714 = 0.03798 + 0.01714\\c_{Na^{+}}= \textbf{0.055 12 mol/L}[/tex]

2. Mass balance for arsenate species

All the arsenate species come from the Na₂HAsO₄.

The reactions involved are

HAsO₄²⁻+ OH⁻ ⇌ AsO₄³⁻ + H₂O

HAsO₄²⁻ + H₂O ⇌ H₂AsO₄⁻ + OH⁻

H₂AsO₄⁻ + H₂O ⇌ H₃AsO₄ + OH⁻

The mass balance equation for arsenate species is

[tex]\rm c_{\text{arsenate}} = [HAsO_{4}^{2-}] + [AsO_{4}^{3-}] + [H_{2}AsO_{4}^{-}] + [H_{3}AsO_{4}][/tex]

At the moment of mixing, the concentration of Na₂HAsO₄ had halved.

[Na₂HAsO₄] = ½ × 0.039 78 = 0.018 99 mol·L⁻¹

[tex]\rm [HAsO_{4}^{2-}] + [AsO_{4}^{3-}] + [H_{2}AsO_{4}^{-}] + [H_{3}AsO_{4}] = \textbf{0.018 99 mol/L}[/tex]

Answer:

Explanation:

The objective here is to prepare  1 liter of LB + Kan (100 μg/ml final concentration) + Amp (50 μg /ml final concentration) liquid media.

Given that :

the Stock concentration of Amp: 100 mg/ml (since 1 mg/ml = 1000 μg/ml)

it is required that we convert stock concentration in  μg/ml since 100 mg/ml = 100000  μg/ml

However, using formula C₁V₁=C₂V₂ (Ampicilin),

where:

C₁ = 100000 μg/ml,

V₁=?,

C₂= 50  μg/ml,

V₂=1000 ml

100000 μg/ml × V₁ = 50  μg/ml × 1000 ml

V₁ =  50  μg/ml × 1000 ml/100000 μg/ml

V₁ =   0.5 ml

Given that:

the Stock concentration of Kan: 25 mg/ml (since 1 mg/ml = 1000 μg/ml)

it is required that we convert stock concentration in  μg/ml , 25 mg/ml = 25000 μg/ml

Now by using formula C₁V₁=C₂V₂ (Kanamycin),

C₁ = 25000 μg/ml,

V₁=?,

C₂= 100  μg/ml,

V₂=1000 ml

25000 μg/ml × V₁ = 100  μg/ml × 1000 ml

V₁ =  100  μg/ml × 1000 ml/25000 μg/ml

V₁ =   4 ml

Thus; in 1 lite of Lb+ Kan+Amp preparation;

0.5 ml of Amp & 4 ml of kanamycin is used for their stock preparation.

Finally;

Sterilization step should be carried out in flask (Clean dry glass wares) for media in an autoclave, the container size should be twice the volume of media which is prepared.

Answer:

Follows this order: B=> A => C.

Explanation:

NB: kindly check the attachment for the diagram of compounds A, B and C.

Elution is a very important concept in chromatography separation techniques. It deals with the use of eluent in the removal of an adsobate from an adsorbent. The principle behind Elution is just about how polar the solvent is.

So, in this question Compound B will go with the Elution first because of its polarity. Compound B has lesser polarity as compared to Compounds A and B.

Compound A will then elutes second because of its polarity too as resonance increases its polarity.

Last, compound C elutes because it has the highest polarity which is caused by electronegative atoms.

Answer:

In this problem the correct thing would be to use the ideal gas equation.

Explanation:

Well in this exercise we will use the following equation:

(P x V) / T = (p x v) / t

On the right side of the equation we will find the initial values, that is, the values ​​with which the reaction begins and in general they are always the first to write in the problems.

Instead on the left side of the equation, the letters that are in lowercase are the final values, that is to say at the end of the reaction that the values ​​of pressure, temperature and volume are reached.

P is pressing, just like p, T and t are temperature, and V and v are volume.

We use this equation so we consider the behavior of said gas to be an IDEAL gas, a constant volume.

That is why the given pressures require an atmosphere to pass, which is another unit used to press the pressure ... Much needed in this equation! An atmosphere is equivalent to 760 millimeters of mercury ...

Then the final and initial pressures would be:

initial pressure: 1.15 atm

final pressure: 1.38 atm

In this way you already have the values ​​to be able to solve in the equation your unknown that would be the final temperature:

Considering that the volume is constant, we cancel it from the equation, 1.15 atm would be in the value of P and 1.38 in the value of p ... In this way it considers that 20 degrees Celsius is the initial temperature or ses T, we would only have to clear the t.

Answer:

The rates of decay of radioactive elements

Explanation:

The age of a rock in years is called its absolute age. Geologists find absolute ages by measuring the amount of certain radioactive elements in the rock. When rocks are formed, small amounts of radioactive elements usually get included.

Answer:

H2CO3 = 2H+ + CO3-

Explanation:

It is simply what carbonic acid breaks down into when placed in water. Since carbonic acid is made up of H and CO3, these are the products.

Answer:

a physical change is something that has not been modified chemically and can possibly be changed back to the state it was once before. A physical change keeps all the same atoms and none of them is modified.

Example:

When a block of clay is morphed into a giraffe statue, it can be morphed back to its original state. If someone burnt the block of clay, the atoms would be modified and it would be unable to go back to its previous state.

-----------------------------------------------------------------------------------------------------------------

(If you're referring to a question with these answers)

A. iron rusting

B. milk turning to curd

C. water boiling

D. paper burning

E. hard water staining pipes

-----------------------------------------------------------------------------------------------------------------

Answer:

C. Water Boiling

(If you are referring to a question with these answers I think this is the correct answer if not I do apologize)

-----------------------------------------------------------------------------------------------------------------

Answer:Precision can be defined as the. reproducibility of a measured value. Precision is how close the measured values are to each others. In contrast with accuracy, accuracy is the agreement between a measured value and an accepted value.

Explanation:

Answer:

Option C

The specific heat is the heat capacity for one mole of a substance.

Explanation:

The incorrect statement is  The specific heat is the heat capacity for one mole of a substance.

This is because the specific heat capacity is the amount of heat required to raise the temperature of 1 gramme of a substance by 1 degree Celcius.

Note that the unit in question here for the specific heat capacity of the substance is in grammes.

The definition given in the options is actually for the molar heat capacity of the substance, not the specific heat capacity.

Answer: The result section of the project contains your findings while carrying out your research or study.

Explanation:

The Results section of a research or study usually contains only the findings of your study or research.The findings which usually include

1. Data presented in tables, charts, graphs, and other figures.

2. A contextual analysis of this data explaining its meanings. Usually in sentences.

Our result gotten is not discussed in result section because every project or research work has a discussion page where every results or findings are discussed. The result section is expected to carry what you found.

Answer:

9.82 km.

Explanation:

Hello,

In this case, given the conversion factors from miles to kilometres and from miles to feet, we can directly compute the jet’s cruising altitude in kilometres as shown below:

[tex]32,200ft\times \frac{1mile}{5280ft}\times \frac{1.61km}{1mile} \\\\=9.82km[/tex]

Best regards.

Answer:

Since the tape has extra electrons, it has a negative charge. When you move your finger close to the tape, electrons in your skin are repelled and move away. This makes the skin on your finger tip have a slight positive charge. Since positive and negative attract, the tape moves toward your finger.

Answer:

5-methylhex-1-yne//5-methylhex-2-yne//2-methylhex-3-yne

Explanation:

We have to start with the information on the IR spectrum. The signal at 3300 is due to a C-H bend sp carbon and the signal in 2200 is due to the stretch carbon-carbon. Therefore we will have an alkyne. Now if we have 2-methylhexane as the product of hydrogenation we have several options to put the triple bond. Between carbons 1 and 2 (5-methylhex-1-yne), between carbons 2 and 3 (5-methylhex-2-yne) and between carbons 3 and 4 (2-methylhex-3-yne). On carbon 5 we have a tertiary carbon therefore we dont have any other options.

See figure 1

I hope it helps!

Answer:

Hydrogen peroxide is ans

Answer:

Li>Na>K>Rb

Explanation:

Answer:

c. Li > Na > K > Rb

Explanation:

edge 2021

(:

Answer:

Hot material near the core is less dense and rises, when it cools, it becomes more dense and sinks.

Explanation:

This best explains how heat plays a role in the movement of materials within Earth's interior because it's how convection works. Convection is the circular motion that happens when warmer air or liquid which has faster moving molecules, making it less dense rises, while the cooler air or liquid drops down. Convection currents within the earth move layers of magma, and convection in the ocean creates currents.

Earth’s interior is like a closed chamber, hot material near Earth's surface is more denser and sinks, and when it cools, it becomes less dense and Rises.

Convection is the process of heat transfer by the bulk movement of molecules within fluids such as gases and liquids. The heat transfer take place from solid to no solid material. like air and water.

As we take example of home. In home heat take nearer the roof and cold air will be nearer to the flour. It is because of hot is less denser then the cold air. Hot air will become less denser and move towords upside. Cold air become denser move towards down.

Similarly, on earth. Nearer to earth hot materials are more dense and sinks. When it cools, it become less dense and rises.

To find more about Heat flow, refer the link below:

brainly.com/question/15394654

#SPJ2

Answer:

Anode half reaction;

Co(s) ----> Co^2+(aq) + 2e

Cathode half reaction;

2Ag^+(aq) + 2e-------> 2Ag(s)

Explanation:

A voltaic cell is an electrochemical cell that spontaneously produces electrical energy from chemical reactions. A voltaic cell comprises of an anode (where oxidation occurs) and a cathode (where reduction occurs). The both electrodes are connected with a wire . A salt bridge ensures charge neutrality in the anode and cathode compartments. Electrons flow from anode to cathode.

For the cell referred to in the question;

Anode half reaction;

Co(s) ----> Co^2+(aq) + 2e

Cathode half reaction;

2Ag^+(aq) + 2e-------> 2Ag(s)