Concentration refers to the amount of substance present.
What is concentration?
The term concentration refers to the amount of substance present. There are many units that could be used for concentration of a solution. This makes reference easy.
To express the concentration in milligram per liter;
45/1000/1 L = 0.045 mg/L
To express the concentration in molarity;
Number of moles = mass/molar mass = 45.00 g /106 g/mol = 0.42 moles
Molarity = 0.42 moles/1 L = 0.42 M
Learn more about concentration:https://brainly.com/question/10725862
#SPJ1
What is the density of a liquid with a mass of 31.1415 g and a volume of 30.13 ml?
The liquid with a mass of 31.1415 g and a volume of 30.13 ml has a density of: 1.033 g/ml
The density formula and the procedure we will use is:
d = m/v
Where:
v= volumed= densitym= massInformation about the problem:
m = 31.1415 gv =30.13 mld= ?Applying the density formula we get:
d = m/v
d = 31.1415 g/30.13 ml
d = 1.033 g/ml
What is density?It is a physical quantity that expresses the ratio of the body mass to the volume it occupies.
Learn more about density in: brainly.com/question/1354972
#SPJ4
Describe how atoms form positive ions by losing electrons or negative ions by gaining electrons
Atoms form positive ions by losing electrons or negative ions by gaining electrons through a special type of chemical combination called electrovalent or ionic combination.
How atoms of sodium and chlorine combine together to form their ionsIt follows that metals are electropositive elements which donates its valence electrons to the nonmetals. The atoms which donates its electrons become positively charged while the species that recieve electrons become negatively charged.
In the formation of sodium chloride, sodium donates its 1 valence electron to chlorine become positively charged; Na+ and chlorine which recieves the electron to add to it's 7 valence electrons become negatively charged; Cl-
Na + Cl ---- Na+Cl-
So therefore, atoms form positive ions by losing electrons or negative ions by gaining electrons through a special type of chemical combination called electrovalent or ionic combination.
Learn more about atoms:
https://brainly.com/question/1186810
#SPJ1
When Using a gas tube spectroscopy , how does it give off a certain color or colors? Explain in terms of electrons. What scientist discovered this?
When Using a gas tube spectroscopy , it give off a certain color or colors when Electrons which are in the gaseous atoms first starts to get excited, and then they tend to fall back to smaller form of energy levels, thereby emitting light that is of a unique color in the process.
What scientist discovered this?Isaac Newton through his experiment in 1666.
Why does a gas discharge tube have a certain color?Energy often excited if the electrons in the gases tends to move to a higher energy states.
Note that for them to be able to get back to the ground state, electrons need to let off excess energy and this is often done in the form of light. The light is said to have different color in all of the tube because of they have different wavelengths of light that need to be released.
Therefore, When Using a gas tube spectroscopy , it give off a certain color or colors when Electrons which are in the gaseous atoms first starts to get excited, and then they tend to fall back to smaller form of energy levels, thereby emitting light that is of a unique color in the process.
Learn more about spectroscopy from
https://brainly.com/question/13031787
#SPJ1
Where on the periodic table do you find elements that have 'full' valence electron shells and are thus stable and unreactive? (1 pt)
*
1 point
on the left side of the periodic table
on the right side of the periodic table
across the top of the periodic table
across the bottom of the periodic table
in the middle of the periodic table
scattered around the periodic table
Elements that have 'full' valence electron shells and are thus stable and unreactive are found at rightmost side of the periodic table.
What is valence electron?The electrons in an atom's outermost shell, or energy level, are called valence electrons.
For instance, the valence electrons of oxygen are six, with two in the 2s subshell and four in the 2p subshell.
The noble gases—helium, neon, argon, krypton, xenon, and radon—belong to the group (family) of elements that have complete outer shells.
Element 118, oganesson, also belongs to this group, although almost all of its chemical and physical properties are yet unknown.
To learn more about Valence electron, refer to the below link:
https://brainly.com/question/4954103
# SPJ1
Help with number 2
2. Which of the following does not describe a pure substance?
(A)
B
D
Molecules of the same type of atom attracted to each other
Molecules of different types of atoms that are not attracted each
other
Individual atoms of different types repeated to form extended
structures
Individual atoms of the same type connected to form extended
structures
Answer:
B
Explanation:
This is because due to the fact that they are not attracted to each other they do not form a solution
what ratio of ch₃nh₂ to ch₃nh₃⁺ is needed to prepare a ph 10.30 buffer? (kb for ch₃nh₂ is 4.4 × 10⁻⁴)
ratio of CH3NH2 to CH3NH2+ is 2.58:1
The acid dissociation constant, Ka, of acids and bases, and the pH of a chemical solution of a weak acid are related by the Henderson-Hasselbalch equation.A weak acid and the conjugate base of the weak acid, or a weak base and the conjugate acid of the weak base, are combined to form the buffer solution, a water-based solvent solution.Use the Henderson Hasselbalch equation pH = pKa + log [salt]/[acid]
first solve for [salt]/[acid]
pKb= -log Kb= 7.72
10.30= 7.72 + log [salt]/[acid]
log [salt]/[acid] = 2.58
[salt]/[acid] = 2.58
So you need 2.58 : 1 for the ratio of CH3NH2 to CH3NH3^+
learn more about buffer solution here:
https://brainly.com/question/8676275
#SPJ4
What is the term for the amount of energy that needs to be added for a chemical reaction to start?.
Answer:
activation energy
Explanation:
dont really have an explanation but there's an image attached.
Create a chart that compares physical and chemical properties. Give two examples for each type of property
Answer:
look the image
Explanation:
the property of water molecules that is responsible for all the other physical and chemical properties is
The hydrogen bonding of water is one of the main property of water which makes it responsible for all the other physical and chemical properties.
Water molecules are polar in nature and they form hydrogen bonds. Hence, they have a high boiling point , high specific heat and density. Water can exhibit the properties of an acid, as well as a base (amphoteric character). The water molecules are constantly moving and the hydrogen bonds continuously breaks and forms again. These hydrogen bonds are strong, which is the reason for the unique properties of water.
To learn more about properties of water :
https://brainly.com/question/15395979
#SPJ4
a typical atom has a diameter of about 1.0 × 10-10 m. approximately, how many atoms are there along a 1.0-inch line?
The number of atoms in 1 inch is 240 billion atoms
Given:
diameter of atom = 1.0 × 10^-10 m
To Find:
atoms are there along a 1.0-inch line
Solution:
1 inch = 0.254 m
0.254 m = 1 inch
1 m = 1/0.254 = 3.93 inch
1.0 × 10^ -10 = 3.93 x 1.0 × 10^-10 = 3.93 x 10^-10 inch
3.937 x 10-2 inches. This is approximately 4 one-billionths of an inch.
Divide 24 cm by the atomic diameter to get the number of atoms.
24/ (1.0 x 10^-10)= 24 x 10^10 = 2.4 x 10¹¹
240 billion atoms
Hence, the number of atoms in 1 inch is 240 billion atoms
Learn more about Atoms here:
https://brainly.com/question/6258301
#SPJ4
explain any industry that uses heavy chemical as raw materials production
Answer: This may help you
https://ay.live/1vVB3
Explanation:
Element X has a half life of 6 days. If you start with 50 kg of element
how much would be left after 3 days?
12.5 kg
25 kg
50 kg
35.35 kg
12.5 grams will be left.
Given:
half life of X= 6 days
Initial amount - 50 kg
Amount left after 3 days = ?
Half life - The period of time needed for anything to go through a process in which half of it participates, for example, the period of time needed for half of a radioactive substance's atoms to disintegrate. It means after half life the element will become half its quantity.
A quantity's half-life (symbol - t1/2) is the amount of time needed for it to decrease to half of its initial value. In nuclear physics, the phrase is frequently used to indicate how rapidly unstable atoms decay radioactively or how long stable atoms last.
According to the question, If half life is 6 days and we start with 50 kg of element, after 6 days it will become 25 kg and after 3 days it will become 12.5 grams .
t¹/₂ = 6 days
Initial amount = 50 kg
After half life = 50/2
= 25 kg
∴ After 3 days = 25/ 2
= 12.5 kg
Hence, 12.5 kg is left after 3 days.
To learn more about half life refer - https://brainly.com/question/2320811
#SPJ9
complete the mechanism for the base‑catalyzed racemization of the chiral ketone by adding any missing atoms, bonds (including wedge and dash bonds), charges, nonbonding electrons, and curved arrows (forward reaction only). step 1: draw curved arrows.
The chiral ketone (2R) -2-methyl-1-phenylbutan-1-one is converted into
(2S)-2-methyl-1-phenylbutan-1-one by base‑catalyzed racemization.
The mechanism of base‑catalyzed racemization of the chiral ketone is as above.
What is Ketone?Ketone is defined as the organic compounds having C=O as a functional group.
What is Chiral Ketone?Chiral ketone are those in which the the alkyl group bonded with C=O are same.
What is base‑catalyzed racemization?Base‑catalyzed racemization is defined as a process in which the optically active compounds which is consist of only one enantiomer are allow to converted into an equal mixture of enantiomers having zero optical activity in the presence of catalyst which is basic in nature.
Racemization rates are mainly dependents on the molecule and conditions some of them are pH and temperature.
Thus, we concluded that the chiral ketone (2R) -2-methyl-1-phenylbutan-1-one is converted into
(2S)-2-methyl-1-phenylbutan-1-one by base‑catalyzed racemization.
learn more about base‑catalyzed racemization:
https://brainly.com/question/23986388
#SPJ4
6. CCC Patterns Compare the ions of elements listed in the table with the atoms of the element. For example, compare the fluorine ion to the fluorine atom. Based on the similarities and differences between the two, write a definition for "ion.'
The number of protons and electrons in an atom is equal, making them neutral particles. According to definition, an ion is an electrically charged particle that is created by either taking electrons from a neutral atom to generate a positive ion or adding electrons to produce a negative ion.
Take note that while the ion is known as fluoride, the atom is called fluorine. The electronic structure of a fluoride ion is similar to that of a neon atom (Ne). A fluoride ion, however, is not a neon atom. A fluoride ion's nucleus, which is an atom of fluorine, has 9 protons, but the nucleus of a neon atom has 10.
The fluorine atom has nine electrons, but the fluorine ion (flouride) has ten, meaning that while fluorine has nine protons and electrons, the flouride has one more electron than the fluorine atom does, which has nine and ten electrons respectively.
While flouride is negatively charged electrically, fluorine is electrically neutral.
To learn more about ions and atoms refer- https://brainly.com/question/6258301
#SPJ9
Do the follow reactions depict heat of formation reactions? if so, mark the reaction as yes, if it is not a heat of formation reaction, then choose no.
The amount of heat created or absorbed during a reaction that takes place under a constant amount of pressure is measured by the enthalpy change.
What causes formation heat to be produced?The change in enthalpy that occurs as one mole of a compound is created from its component parts is known as the "heat of formation." The total amount of energy that should be added to or released during a chemical reaction is known as the heat of reaction.
What signs do you see when heat is produced?By deducting the total of the standard enthalpies of formation of the reactants from the sum of the standard enthalpies of formation of the reactants and products, one can determine the standard enthalpy change of formation.
To know more about Heat of formation visit:
https://brainly.com/question/13096727
#SPJ4
helium has a molecular weight of 4.003. what is the weight of 2 cubic meters of helium at 1 atmosphere and 20°c?
Helium has a molecular weight of 4.003. The weight of 2 cubic meters of helium at 1 atmosphere and 20°c is 3.27 N.
What is helium?Helium is the second element in the periodic table. It is the lightest gas present in the atmosphere.
By the law of pure gas.
PV = nRT
The initial pressure is p = 101. 325 Kpa
Initial volume, v = 2 m
The molecular weight of helium is, 4.003
Initial temperature, T = 20°c, = 293 K
Universal gas constant is R = 8.314\ \rm{kJ/kg-K}
Putting the value in the formula
PV = mRT / M
m = 101. 325 Kpa x 2 x 4.003 / 8.314 x 293 = 0.333 kg.
The weight of helium gas
W = mg
0.333 x 9.81 = 3.27 N
Thus, the weight of 2 cubic meters of helium is 3.27 N.
To learn more about molecular weight, refer to the link:
https://brainly.com/question/102513
#SPJ4
what is the theoretical yield of bromobenzene in this reaction when 30.0g of benzene reacts with 65.0 g of bromine?
The theoretical yield of bromobenzene in this reaction when 30.0g of benzene reacts with 65.0 g of bromine is: 46.153 %
To solve this problem the theoretical yield formula and the procedure we will use is:
theoretical yield = relation between reactants * 100
Information about the problem:
m(benzene) = 30.0gm(bromine) = 65.0 gtheoretical yield=?Applying the theoretical yield formula we get:
theoretical yield = (30.0g * 1g /65.0 g) * 100
theoretical yield = 46.153 %
What is the yield of a reaction?In chemistry, the yield of a reaction is the amount of product obtained from the conversion of the reactants in a chemical reaction.
Learn more about yield of a reaction at: brainly.com/question/20884766
#SPJ4
Copper ions, cu+2, are produced in solution during bioleaching. write an ionic equation for the displacement reaction between these copper ions and iron. include state symbols
An ionic equation for the displacement reaction between copper ions and iron: Cu²⁺(aq) + Fe(s) → Cu(s) + Fe²⁺(aq)
In this chemical reaction, there is a transfer of electrons from iron (Fe) to copper (Cu).
Iron change oxidation number from 0 to +2 (loose electrons) and copper change oxidation number from +2 to 0 (gain electrons).
Oxidation half reaction: Fe⁰ → Fe²⁺ + 2e⁻.
Reduction half reaction: Cu²⁺ + 2e⁻ → Cu⁰.
Oxidation is increase of oxidation number.
Reduction is lowering oxidation number because atom gain electrons.
(aq) is an aqueous solution.
(s) is a solid, insoluble in the water.
More about oxidation: brainly.com/question/157342
#SPJ4
the density of water at 4 degree celsius is 1.00 g/ml britanny takes a sample of water and finds the mass to be 16.7 g and the volume to be 16.2 what was her percent error
The mass is 16.7 g and the volume is 16.2. The percent error is 2 percent.
What is the percent error?Percent error is the difference between the estimated value and the calculated value. Percent error is calculated by the actual value subtracted by the expected values divided by the expected value.
Given, that the density is 1.00 g/ml
The temperature is 4-degree celsius
The mass is 16.7 g
The volume is 16.2 l
Density = m/v 16.7 / 16.2 = 1.03 which is the actual value
The estimated value is 1.00 g/ml
The formula is
1.03 - 1.00 / 1.00 = 0.02
0.02 x 100 = 2 %
Thus, the percent error is 2 %.
To learn more about percent error, refer to the link:
https://brainly.com/question/3670306
#SPJ4
which observation most likely indicates that only a chemical change has taken place?(1 point) states of matter changes. states of matter changes. the change cannot be reversed. the change cannot be reversed. a reaction occurs. a reaction occurs. the shape changes. the shape changes.
The correct answer as to which observation most likely indicates that only a chemical change has taken place would that the change cannot be reversed.
What is a Chemical change ?A chemical change is the transformation of one substance into another, the emergence of new compounds with distinct properties, or any combination of these. It happens when two compounds mix to create a new material (synthesis or either decomposes to form more substances)
Burning, frying, rusting, and rotting are a few instances of chemical transformations. Boiling, melting, freezing, and shredding are a few examples of physical changes.When bonds between molecules or atoms are created, disrupted, or both, chemical changes result. This implies that a material is changed from one with a certain set of attributes (such as melting point, colour, flavour, etc.) into another with a different set of properties.Learn more about Chemical change here:
https://brainly.com/question/1222323
#SPJ4
Which list includes only physical properties?
7. Complete the following table, comparing forces within atoms.
The four fundamental forces in the universe are:
Electromagnetic force
This is the force that produces electrical and magnetic effects in objectsCompared to our solar system- planets don't fall into the SunStrong Nuclear force
Attractive force between the proton and the neutron in the nuclei of atomsStrongest force known to scienceWeak Nuclear force
A force that is significant when atoms break apartIt cause the conversion of a neutron into a proton, an electron and an antineutrino.Anti-gravitational force
It is the weakest force in the universeAn unsolved mystery in scienceWhat are forces?Forces refers to any agent which causes a change in the motion or state of rest of a body.
Forces are also described as push or pull agents that change the motion or position of a body when that are applied to that body.
There are four fundamental forces in the universe and they are given below as follows:
Electromagnetic force:
This is the force that produces electrical and magnetic effects in objectsCompared to our solar system- planets don't fall into the SunStrong Nuclear force:
Attractive force between the proton and the neutron in the nuclei of atomsStrongest force known to scienceWeak force
A force that is significant when atoms break apartIt cause the conversion of a neutron into a proton, an electron and an antineutrino.Anti-gravitational force
It is the weakest force in the universeAn unsolved mystery in scienceLearn more about fundamental forces at: https://brainly.com/question/793762
#SPJ1
John has a solution. It turns yellow when he adds red cabbage juice. Predict what colour the solution would turn if he added hibiscus- flower juice. Explain your answer.
As the solution turns yellow when re cabbage juice indicator is added it implies that its base solution so the color of the solution when hibiscus flower juice added is dark grey to green.
when hibiscus indicator added Anywhere from dark pink to pale pink usually indicates an acid, while dark gray to green colors usually indicate a base.
Dark blue should be the color of red cabbage indicator. The cabbage indicator's color will shift to red or pink if the solution is an acid, and to green or yellow if the solution is a base. In the event that the test solution is neutral, it will stay purple or blue
To learn more about Indicator:
https://brainly.com/question/28093573
#SPJ4
the diameter of a hydrogen atom is about 1.05 cross times 10 to the power of negative 10 end exponentmeters. a protein molecule has an overall length of 3000 times (or 3 cross times 10 cubed times) the diameter of a hydrogen atom
As a result, the protein molecule is 315 x 10^-9 metres long.
What does a hydrogen atom contain?The hydrogen atom is the most fundamental of all atoms because it just contains one proton and one electron.In addition to this most common isotope, the hydrogen atom can also be found in protium, deuterium, and tritium.Hydrogen, denoted by the letter H, has the first atomic number among the lightest elements.How do you describe a hydrogen atom?There are three known hydrogen isotopes.Hydrogen has isotopes with masses of 1, 2, and 3, with mass 1 being the most common.This isotope is also referred to as protium and hydrogen in everyday language (symbol H, or 1H).learn more about hydrogen atom here
brainly.com/question/13796082
#SPJ4
How many valence electrons makes an atom chemically unreactive? (1 pt)
*
1 point
1
7
8
11
8
Explanation:The octet rule explains reactivity in relation to valence electrons.
Valence Electrons
Firstly, let's define valence electrons. Across the periodic table, elements can have a wide range of total electrons. However, when discussing reactions, valence electrons are the most important. Electrons arrange themselves according to energy levels. Any electrons that are on the outermost energy level are considered valence electrons. Most valence energy levels, also called valence shells, hold 8 electrons.
Octet Rule
Now that we know what valence electrons are we can use them to determine reactivity. It is important to note that atoms are most stable when their valence shell is full (as supported by Hund's rule). The octet rule explains atoms will always attempt to fill their valence shell in order to become stable. If an atom has only a few valence electrons, then it will attempt to lose its electrons. On the other hand, atoms that almost have a full valence shell will attempt to gain new electrons.
The losing or gaining of electrons occurs during reactions. So, if an atom already has 8 valence electrons then it will not react. It is already stable, so it has no need to lose or gain more electrons.
Exceptions
While the octet rule explains a lot, like all rules in chemistry it has exceptions. The most common exceptions are hydrogen and helium. Due to the size of these atoms their valence shell can only hold 2 electrons. So, these atoms are actually unreactive at 2 valence electrons.
Another exception can be seen with sulfur and xenon. Both of these atoms are hypervalent. This means they can react even if they have 8 valence electrons. However, this exception is less common.
a chemist adds of a calcium bromide solution to a reaction flask. calculate the mass in grams of calcium bromide the chemist has added to the flask. round your answer to significant digits.
The mass of Calcium bromide added in the flask is 29.7 g.
What is Molarity?Molarity is defined as the ratio of number of moles od solute to the number of volume of solution in litres.
Molarity = number of moles/ volume
Calculation of MolesNumber of moles = Molarity × volume
Given,
Molarity of Calcium bromide = 0.363 M
Volume of Calcium bromide = 410 mL
= 0.410L
By substituting all the value, we get
Number of moles = 0.363 × 0.410
= 0.148 mol
As we know that,
Molar mass of Calcium bromide = 199.89 g
What is Mole?Mole is defined as the given mass of substance to the molar mass of substance.
Given mass = Moles × Molar mass
= 0.148 × 199.89
= 29.75 g
= 29.7 g (significant digit)
Thus, we calculated that the mass of Calcium bromide added in the flask is 29.7 g.
learn more about Molarity:
https://brainly.com/question/19517011
#SPJ4
DISCLAIMER:
The above question is incomplete. Below is the complete question
A chemist adds 410.0mL of a 0.363 M calcium bromide solution to a reaction flask. calculate the mass in grams of calcium bromide the chemist has added to the flask. round your answer to 3 significant digits.
H2(g) + Br2(g) → 2HBr(g)
The above reaction is carried out at 25oC. ΔH is -72 kJ mol-1 and ΔS is - 106 J mol-1K-1, the reaction will
A. not proceed spontaneously at the given
B. proceed spontaneously at the given temperature
C. proceed in the reverse direction at the given temperature
D. proceed spontenously at lower temperature
Given the conditions for a reaction to be spontaneous under a given set of reaction conditions, the reaction not proceed spontaneously at the given temperature; option A
What are spontaneous reactions?Spontaneous reactions are reactions that proceed without an input of extra energy as the reaction favors the formation of products under the given reaction conditions.
For spontaneous reactions, free energy change, ΔG is negative and entropy ΔS is positive.
Given the above reaction occurring at the given conditions:
H₂ (g) + Br₂ (g) → 2 HBr(g)
The reaction was carried out at 25 °C.
ΔH is -72 kJmol⁻¹ and ΔS = - 106 Jmol⁻¹K⁻¹
The reaction is an exothermic reaction at room temperature
The entropy, ΔS of the reaction is negative indicating that the reaction is not spontaneous at that temperature.
Therefore, correct conclusion will be that the reaction is exothermic at the given temperature but will not proceed spontaneously under the given conditions.
Learn more about spontaneous reactions at: https://brainly.com/question/28536971
#SPJ1
What are the limitations of your model in explaining fusion?
The major factors influencing fusion consist of the required high temperature and high pressure which is not shown in the model and hence becomes one of its limitations.
Two major requirements for fusion are:
1) The energy from the high temperature allows the hydrogen atoms to overcome the electrical attraction between the protons. Temperatures of roughly 100 million Kelvin are necessary for fusion. Hydrogen is not a gas at these temperatures; it is a plasma. The high-energy state of matter known as plasma is one in which all atoms have had their electrons removed and are now free to move about. The sun's massive mass and the compression of that mass in the core caused by gravity allow it to reach these temperatures.
2) The hydrogen atoms are compressed together by high pressure. For Fusion, they need to be within 1x10-15 meters of one another. The sun compresses hydrogen atoms together in its core using gravity and its bulk. We must use strong magnetic fields, potent lasers, and ion beams to force hydrogen atoms together.
To learn more about fusion please visit-
https://brainly.com/question/12701636
#SPJ9
using a electron miscroscope, jane measured a rod-shaped bacterium and found it to be 0.00099345 meters in lenght. list the steps she should take to represnt this number
The transmission electron microscope (TEM) works much like a light microscope, transmitting a beam of electrons through a thin specimen and then focusing the.
What is transmission electron microscope?A stream of electrons is sent through a specimen during transmission electron microscopy (TEM), which produces a picture of the sample. The specimen is often a grid- or suspension-supported ultrathin segment that is less than 100 nm thick. As the beam passes through the specimen, a picture is created due to the interaction of the electrons with the material. The picture is subsequently enlarged and focussed onto an imaging device, such as a fluorescent screen, a sheet of photographic film, or a sensor like a scintillator linked to a charge-coupled device.
Due to the electrons' shorter de Broglie wavelength, transmission electron microscopes can image at a resolution that is substantially higher than that of light microscopes.
To learn more about transmission electron microscope from the given link:
https://brainly.com/question/10958281
#SPJ4
question: Using an electron microscope, Jane measured a rod-shaped bacterium and found it to be 0.00000345 meters in length. List the steps she should take to represent this number in scientific notation.
Answer:
The coefficient of this value in scientific notation is 3.45.
The decimal point needs to be moved six places to the right, so the exponent is -6.
0.00000345 = 3.45 × 10-6
Explanation: edmentum sample answer
Is this statement true or false?
There is nothing we can do to help prevent soil erosion. Only scientists and farmers can work on solutions.
Answer: F
Explanation:
we can prevent soil erosion by reducing the amount of water and blockages that might build water up and erode the soil around farmland/other