Answer: Concave mirror and convex lens
Explanation: A spherical mirror and a thin spherical lens have each a focal length of +10cm, this means that distance of any object from the mirror is +10 metres.
While for the lens, the distance of any object to the other side of the lens is +10 metres. Therefore, the mirror is concave mirror and the lens is a convex lens.
Which situation will the lowest resistance occur
The correct choice is ' C '.
-- Shorter wire has less resistance than longer wire.
-- Thicker wire has less resistance than thinner wire.
-- Colder wire has less resistance than hotter wire.
A vector points 12.0 units along the x-axis, and 9.00 units along the y-axis. Find the direction of the vector
The resultant points somewhere between the positive x and y axes.
The angle it makes with the x-axis has a tangent of (9/12) = 0.75 .
That angle is 36.9°, rounded to the nearest tenth of a degree.
So the resultant vector points up and to the right, 36.9° above the x-axis.
how does the direction of acceleration compare with the direction of the net force that produces it
Answer:
Explanation:
The direction of the acceleration is in the same direction as the net force causing it. F = ma is actually a vector equation in which f and a are both vectors and m is a scalar constant.
Which object would have the most kinetic energy?
O A. An elephant sitting at the top of a cliff
B. A sloth hanging from a tall tree
C. A mouse running at 11 km/h
D. A zebra running at 10 km/h
Answer:
D
Explanation:
Answer:
It is D
Explanation:
Because kinetic energy ALSO depends on mass (weight) so it has to be moving and has to have weight in order to be called kinetic energy.
At which point is the potential energy the greatest? At which point is kinetic energy the greatest?
Answer:
Kinetic energy is greatest at the lowest point of a roller coaster and least at the highest point.
hope it helps you make me as brainlylistPotential energy will be greatest at the points A and G, and kinetic energy will be greatest at the point D.
• The energy possessed by an object due to its motion is termed as the kinetic energy. On the other hand, the energy stored within an object because of its position relative to some zero position is known as the potential energy of the object.
• Kinetic energy is highest when the velocity is the highest, in the case of pendulum, this takes place at the bottom. In the given case, that is, at point D.
• If kinetic energy is highest at point D, then at the same point potential energy will be the lowest.
• Therefore, potential energy would be highest at its highest point on each of the side of its motion where it remains stationary for some time, that is, at point G and A.
Thus, kinetic energy would be highest at point D, and potential energy would be highest at the points A and G.
To know more about:
https://brainly.com/question/20748548
Which of the following planets helped astronomers locate another planet?
Group of answer choices
Mercury
Uranus
Saturn
Pluto
Answer: Pluto,Mercury
Explanation:
What is the velocity of the objects position vs time graph
Answer: In a position-time graph, the velocity of the moving object is represented by the slope, or steepness, of the graph line. If the graph line is horizontal, like the line after time = 5 seconds in Graph 2 in the Figure below, then the slope is zero and so is the velocity. The position of the object is not changing
Help needed.
(1) A small object carrying a charge of
[tex] - 5 \times {10}^{ - 9} \: c[/tex]
experiences a downward force of 10 Newton when placed at a certain point in an electric field
What is the electric intensity at that point.
2. Determine the electric potential due to a charge of
[tex]12 \times {10}^{ - 9} c[/tex]
at a point 6 cm from the charge.
3. A series arrangement of three capacitors of value at 8micro Farahds, 12 micro Farahds and 24 micro Farahds is connected in series with a 90—V battery
(a) Draw and open circuit diagram for this arrangement (b). Calculate the effective capacitance in the circuit
(c) On closed circuit calculate the charge on each capacitor when fully charged
(d) Determine the PD across the 8 micro Farahds capacitors.
Answer:
1. -2×10 ^-9
2. 1800v
3 (ii) 4micro Farhad
(iii) V = 3.60 ×10²
(Iv) 45v
Explanation:
I hope it helps
How do you represent an object in a free body diagram?
A)An object is represented in a free-body diagram by an arrow and tail.
B)An object is represented in a free-body diagram by a box with a dot in
the middle, indicating its center of mass.
C)An object is represented in a free-body diagram by a word that says object.
D)An object is represented in a free-body diagram by having the mass labeled.
Clear answer
Answer: the answer is D
Explanation:
Which term best describes this step of the investigative process?
question
communication of results
peer review
experiment control
Answer:
peer review
Explanation:
The investigative process involves the development and inclusion of the steps involved to find an answer or solution to a specific question. Certain steps are followed in the process. The hypothesis is formulated, tested, and modified during the whole process. peer review involves the suggestions, comments, and interpretation of people in similar fields about the hypothesis. The given extract focuses on the investigative process of peer-reviewing. The review of the scientists from different countries has been asked to give their suggestions and advice on the journal before its publication.
An electron in a mercury atom drops from energy level f to energy level c by emitting a photon having an energy of
1. 8.20eV
2. 5.52eV
3. 2.84eV
4. 2.68eV
Answer:
The answer is 2.84 eV
Explanation:
An electron in a mercury atom drops from energy level f to energy level c by emitting a photon having an energy of 2.84eV.
What is mercury?Mercury is known to be a type of naturally-occurring chemical element that has been discovered in rock that is found in the earth's crust.
They can be found as a form of deposits of coal. On the periodic table, it symbol is "Hg" and it has about 80 atoms. It can be found as Elemental (metallic) mercury, Inorganic mercury compounds, etc.
Learn more about mercury atom from
https://brainly.com/question/964897
Which one of the following is not equivalent to 2.50 miles?
(1.00 mi = 1.61 km = 5280 ft, 1.00 yd = 3.00 ft = 12.0 in.)
(A) 1.32 x 104 ft
(B) 1.58 x 105 in
(C) 4.02 x 103 km
(D) 4.40 x 103 yd
(E) 4.02 x 105 cm
Answer:
Choice C is not equivalent to 2.50 miles.
Explanation:
The given data is now converted into feet, inches, kilometers, yards and centimeters:
mi - ft
[tex]x = (2.50\,mi)\cdot \left(5280\,\frac{ft}{mi} \right)[/tex]
[tex]x = 13200\,ft[/tex]
[tex]x = 1.320\times 10^{4}\,ft[/tex] (Choice A)
mi - in
[tex]x = (2.50\,mi)\cdot \left(5280\,\frac{ft}{mi} \right)\cdot \left(12\,\frac{in}{ft} \right)[/tex]
[tex]x = 158400\,in[/tex]
[tex]x = 1.584\times 10^{5}[/tex] (Choice B)
mi - km
[tex]x = (2.50\,mi)\cdot \left(1.61\,\frac{km}{mi} \right)[/tex]
[tex]x = 4.025\,km[/tex] (Different from Choice C)
mi - yd
[tex]x = (2.50\,mi)\cdot \left(5280\,\frac{ft}{mi}\right) \cdot \left(\frac{1}{3}\,\frac{yd}{ft} \right)[/tex]
[tex]x = 4400\,yd[/tex]
[tex]x = 4.40\times 10^{3}\,yd[/tex] (Choice D)
mi - cm
[tex]x = (2.50\,mi)\cdot \left(1.61\,\frac{km}{mi} \right)\cdot \left(100000\,\frac{cm}{km}\right)[/tex]
[tex]x = 402500\,cm[/tex]
[tex]x = 4.025\times 10^{5}\,cm[/tex] (Choice E)
Choice C is not equivalent to 2.50 miles.
the skeletal system serves all the following functions except
Answer:
The major functions of the bones are body support, facilitation of movement, protection of internal organs, storage of minerals and fat, and hematopoiesis. Together, the muscular system and skeletal system are known as the musculoskeletal system.
your question seems incomplete. Kindly give the full question so that it helps :)
Answer:
D.
producing ligaments and tendons
Explanation:
A wave is traveling from one medium to another.If the wave is partially transmitted an partially reflected from the boundary,what will happen to the amplitude of the reflected wave?
Answer: the answer is C
Explanation:
100 POINTS! WILL MARK BRAINLIEST FOR CORRECT ANSWER!
Choose one object or instrument. Write a detailed explanation of what happens when a loud and quiet sound is made. Use the words vibration, energy, longitudinal wave, amplitude and particles in your answer.
Answer:
This extra energy causes the string to vibrate more, which helps it move more air particles for a longer time. A string plucked with force has greater amplitude, and greater amplitude makes the sound louder when it reaches your ear. Volume depends on amplitude. Greater amplitude produces louder sounds.
As a charged object approaches a neutral object the objects.......
attract
spin
repel
no interaction
Answer:
attract is the answer.
Answer:
It attracts
Explanation:
It attracts the object
if you crash your car how could you decrease the damage to you or the car using the concept of impulse
Explanation:
Crumple zones are sections in cars that are designed to crumple up when the car encounters a collision. Crumple zones minimize the effect of the force in an automobile collision in two ways. By crumpling, the car is less likely to rebound upon impact, thus minimizing the momentum change and the impulse.
If the box moves at a constant velocity, what do you know about the forces acting on the object?
A)The forces are balanced.
B)The forces are unbalanced.
C)The forces are in outerspace
D)The box has friction
please i need detailed explanation
Answer:
2Micro Farahds
Explanation:
Its in the picture.
I Hope it helps.
When waves travel through water, why do the moving water particles continue to return to their starting position?
OA.
Waves transfer matter, but not energy.
Waves transfer both matter and energy.
OC.
Waves transfer energy, but not matter.
OD.
Waves don't transfer matter or energy.
Answer:
Waves transfer energy, not matter
Explanation:
What would a scientist most likely do to demonstrate the effects of a tsunami? (2 points) construct tsunami models make underwater plates move create actual underwater earthquakes take underwater photographs during a tsunami
Answer:
a - construct tsunami models
Explanation:
scientists cant effect on earthquakes directly, so its not 2 or 3
for 4 it wont help that much to study waves, so its better for them to make model of tsunami waves
7. How does friction affect the kinetic energy of an object?
Answer:
Friction is a resistive force to motion. When two bodies move against each other some of the kinetic energy is converted to heat energy due to friction. This reduces the total kinetic energy in the system. ... Mechanical energy is reduced due to friction and converted to heat.
Explanation:
Kinetic friction does oppose the relative motion of two surfaces. If the one of these surfaces is stationary, then it will tend to slow down the moving object.
A circuit has a voltage drop of 12 V across a 30 2 resistor that carries a
current of 0.8 A. How much power is used by the resistor? Use P = VI.
A. 360 W
B. 12W
C. 9.6 W
D. 24 W
Answer:
C
Explanation:
V=12v
I=0.8A
P=VI
=(12)(0.8)
=9.6W
Answer:
9.6
Explanation:
A machine with a 5-N input force and a 25-N output force has a mechanical advantage of (I point)
02
05.
O20.
O125
Answer:
020
Explanation:
Which of the following is an example of a visual aid? A. a poster B. a pair of glasses C. a set of note cards D. a copy of a written report
Answer:
a pair of glasses
of course
If you wanted to learn more about ancient scientific knowledge, whose life
would you research?
Answer:
I would like to research Nikola Tesla's life
If you see ##### in a cell, you should
make the row taller
retype the number
type in a different number
make the column wider
Answer:
it's D. Make the column wider
Explanation:
What happens to the average kinetic energy of water molecules as water freezes
A. It increases as the water releases energy to its surroundings
B. It increases as the water absorbs energy from its surroundings
C. It decreases as the water releases energy to its surroundings
D It decreases as the water absorbs energy from its surroundings
Answer:
C. It decreases as the water releases energy to its surroundings
Explanation:
The energy that is possessed in the body because of the motion is said to be kinetic energy. When the water freezes, the kinetic energy of the water molecules decreases as the particles stop motion. The energy is released in the surrounding. Freezing takes place when the liquid molecules slow down and lose the kinetic energy to form the solid crystals.
The way a rock reflects light is called the rock's
A. streak
O B. luster
O C. cleavage
D. specific gravity
The way a rock reflects light is called the luster of the rock. Hence option B is the correct answer.
What is Reflection?When light rays bounce off one surface, transition from one transparent medium to the next, or proceed through a media whose structure is constantly shifting, they change direction.
According to the law of reflection, the angle of the reflected ray when reflecting from a level surface is the same as the angle of the ray. (By practice, all angles in wave propagation are expressed with regards to the normal to the surface, or to the line that is perpendicular to it.
The light beam and the surface normally establish a plane in which the reflected beam is always located. The pictures created by straight and curved mirrors can be understood using the
To know more about Reflection:
https://brainly.com/question/15487308
#SPJ2
Curtains over a window are an example of _____. A. transmission B. a medium for light C. how light waves do not require a medium D. a substance that does not transmit a wave
Answer:
C
Explanation:
we know that light doesn't need a medium through which to travel because the speed of light is experimentally constant: independent of the movement of the source or detector or the direction in which it travels.