A water tank measures 24in.×48in.×12in. Find the capacity of the water tank in cubic feet. Do not include units in your answer.

Answer:

B. the molecules in liquid are loosely packed and scattered thus, they cannot be arranged

Answer:

The answer is "Option b"

Explanation:

In this question first we calculates the moles in F-, HF, and in HCL, which can be defined as follows:

Formula:

[tex]\ Number \ of \ moles\ = \ Molarity \times \ Volume \ in \ litter[/tex]

[tex]\ moles \ in\ F- = 0.100 \ M \times 0.0250 L\\\\[/tex]

                     [tex]=\ 0.0025 \ moles[/tex]

[tex]\ moles \ in \ HF \ = 0.126M \times 0.0250 L[/tex]

                       [tex]= 0.00315 \ moles[/tex]

[tex]\ moles \ in \ HCl = 0.0100M \times 0.00500 L[/tex]

                       [tex]= 0.00005 \ moles[/tex]

[tex]\ Reaction: \\\\F - + H+ \rightarrow HF[/tex]

[tex]\Rightarrow \ moles \ in \ F- = 0.0025 \\\\\Rightarrow \ moles \ in \ H+ = 0.00005 \\\\ \Rightarrow \ moles \ in \ HF = 0.00315\\\\ \ total \ moles = 0.00250 -0.0000500 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 0.00315 + 0.00005\\\\\ total \ moles =0.00245 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 0.00245[/tex]

[tex]\ total \ volume \ in \ the \ solution = \ V = \ 0.0300 L\\\\ after \ addition \ of \ HCl \ the \ concentration \ of \ F- \ = 0.00245\ moles \div V[/tex]

                                                                                [tex]=\frac{ 0.00245 \ moles }{0.0300L}\\\\= \frac{245 \times 10^4}{300 \times 10^5} \\\\= \frac{245}{3000} \\\\ = 0.0817 M[/tex]

Answer:

True

Explanation:

A real image can be projected or seen on a screen but a virtual image cannot because a real image is formed when light rays coming from an object actually meet at a point after refraction through a lens while a virtual image is formed when light rays coming from an object only appear to meet at a point when produced ...

Hope this helps you, and Good luck!

Answer:

Human action has affected the population in quite a negative way. Technological innovations and urbanization gave rise to a high degree of pollution on the land, air and water.

Emission of hydrocarbons from automobiles and factories are known to pollute and cause sicknesses related to the respiratory system thereby shortening the lifespan of humans. Pollution of water bodies also cause death of sea animals and thereby reducing food availability of humans.

Answer:

0.263M of CH₃COOH is the concentration of the solution.

Explanation:

The reaction of acetic acid (CH₃COOH) with NaOH is:

CH₃COOH + NaOH → CH₃COO⁻Na⁺ + H₂O

1 mole of acetic acid reacts per mole of NaOH to produce sodium acetate and water.

In the equivalence point, moles of acetic acid are equal to moles of NaOH and moles of NaOH are:

0.0375L × (0.175 moles / L) = 6.56x10⁻³ moles of NaOH = moles of CH₃COOH.

As the sample of acetic acid had a volume of 25.0mL = 0.025L:

6.56x10⁻³ moles of CH₃COOH / 0.0250L =

0.263M of CH₃COOH is the concentration of the solution

Answer:

THE SPECIFIC HEAT OF THE ALLOY IS 0.9765 J/g K

Explanation:

Mass of alloy = 33 g

Initial temperature of alloy = 93°C

Mass of water = 50 g

Initail temp. of water = 22 °C

Heat capacity of calorimeter = 9.20 J/K

Final temp. = 31.10 °C

specific heat of alloy = unknown

specific heat capacity of water = 4.2 J/g K

Heat = mass * specific heat * change in temperature = m c ΔT

Heat = heat capcity * chage in temperature = Δ H * ΔT

In calorimetry;

Heat lost by the alloy = Heat gained by water + Heat of the calorimeter

                     mc ΔT = mcΔT + Heat capacity * ΔT

33 * C * ( 93 - 31.10) = 50 * 4.2 * ( 31.10 -22) + 9.20 * ( 31.10 -22)

33 * C * 61.9 = 50 * 4.2 * 9.1 + 9.20 * 9.1

2042.7 C = 1911 + 83,72

C = 1911 + 83.72 / 2042.7

C = 1994.72 /2042.7

C =0.9765 J/g K

The specific heat of the alloy is 0.9765 J/ g K

Answer:

1. Non-target

2. Bycatch

Explanation:

In the fishing industry, the main aim of the industry is to capture fishes that can be used or eaten and sell. A variety of fishes are captured for this purpose and since they are used therefore are known as Target catch.

But there are some species which has to be discarded because they are toxic and not useful. These non-useful species like eel which gets captured in the net while capturing other fishes are known as Non-target fish.

The eel fish which gets captured is known as bycatch fishes in the fishing operation.

Thus, Non-target and Bycatch are the correct answer.

Answer:

Its just bycatch

Explanation:

The eel species is called a(n) bycatch of the fishing operation.

Answer:

CaSO4

Explanation:

Calcium sulfate (or calcium sulphate) is the inorganic compound with the formula CaSO4 and related hydrates.

Answer:

It is neutral (NR)

Explanation:

Salts are formed when the ionizable hydrogens in an acid is replaced by metallic or ammonium ions from bases. The reaction is known as a neutralization reaction.

The nature of a salt formed from this reaction depends on the nature of the reacting acid and base.

If the reaction is between a strong acid and strong base, the salt produced is a neutral salt.

If the reaction occurs between a strong acid and a weak base, the salt produced is acidic.

If the reaction occurs between a strong base and a weak acid, the salt produced is a basic salt.

Considering the salt above, LiNO3.

On hydrolysis, addition of water, the following products are obtained:

LiNO3 + H2O ----> LiOH + HNO3

The products obtained, LiOH and HNO3 are a strong base and a strong acid respectively. Therefore, the salt, LiNO3, is a neutral salt.

The salt, LiNO₃ is a neutral, NR salt as it's a salt formed from the reaction of a strong acid and a strong base.

In neutralisation reactions, acids and bases react to form salt and water.

However, the salt formed may be acidic, basic or neutral. This is dependent on the type of acid and base which form the salt.

A strong acid and a strong base react to yield a neutral salt like, LiNO₃.

The equilibrium equation when LiNO₃ is dissolved in aqeous solution is;

Evidently, LiOH and HNO₃ are an example strong base and acid respectively.

Read more:

https://brainly.com/question/2254059

Answer:

Explanation:

in your case ,

Meaured value = 112.3

actual value = 119.5

Absolute error= measured value - actual value

Percent error = [measured value - actual value  / actual value ] x 100

Hope this help you to find the answer

Answer:

Chemical Change

Explanation:

Physical change normally mean that the change can revert back to its orginal state, which in this case that is not possible therfore it is a chemical change.

Answer:

polyethylenes

Explanation:

the plastic bottles used to hold potable water and other drinks are made from polyethylene because, the material is both strong and light.

hope this helped!

Answer: Polyethylenes

Explanation: I got 100% on the test :)

Answer:

1.7 moles of ethanol would be needed.

Explanation:

* Calculate the moles of ethanol needed to produce 1.70mol of water. Be sure your answer has a unit symbol, if necessary, and round it to the correct number of significant digits.

First off, we have to state the equation for the reaction.

So we know that;

ethanol + oxygen → acetic acid + water

This leads us to;

C2H5OH + O2 → CH3COOH + H2O

1                    1         1                    1

To obtain the moles of ethanol needed to produce 1.70mol of water, we look at the stoichiometry of the reaction above.

1 mol of ethanol produces 1 mole of water

x mol of thanol would produce 1.7 mol of water

Thus we have;

1 = 1

x = 1.7

x = 1.7 moles of ethanol would be needed.

Answer:

Ca²⁺ + 2 OH⁻ → Ca(OH)₂(s)

Explanation:

In chemistry, the net ionic equation is a way to write a chemical reaction whereas you write only the ions that are involved in the reaction.

When calcium chloride, CaCl₂ reacts with sodium hydroxide, NaOH to produce Ca(OH)₂ the only ions involved in the reaction are Ca²⁺ and OH⁻, thus, the balanced net ionic equation is:

Ca²⁺ + 2 OH⁻ → Ca(OH)₂(s)

Cl⁻ and Na⁺ are not involved in the reaction and you don't have to write them.

The balanced net ionic equation for the reaction between calcium chloride and sodium hydroxide is

The ionic equation for the reaction between calcium chloride and sodium hydroxide can be written as follow:

Calcium chloride => CaCl₂

Sodium hydroxide => NaOH

In solution,

CaCl₂(aq) —> Ca²⁺(aq) + 2Cl⁻(aq)

NaOH(aq) —> Na⁺(aq) + OH⁻(aq)

CaCl₂(aq) + NaOH(aq) —>

Ca²⁺(aq) + 2Cl⁻(aq) + Na⁺(aq) + OH⁻(aq) —> Ca(OH)₂(s) + 2Cl⁻(aq) + Na⁺(aq)

Cancel the spectator ions (i.e Cl⁻ and Na⁺) and write 2 before OH⁻ to obtain the net ionic equation as shown below:

Learn more: https://brainly.com/question/9489859

Answer:

CATION

Explanation:

It's one is the action and the mother is a cation.

a)Atomic number is the number of protons in the nucleus of an atom.

b)atomic number represents the number of protons

An element's identity is defined by its atomic number; this means it represents the number of protons in its nucleus.

The question is incomplete, the complete question is;

Which of the following best describes an atomic number? An element's identity is defined by its atomic number; this means it represents the number of

A) protons plus neutrons in its nucleus.

B) electrons in the element.

C) protons in its nucleus.

D) neutrons in its nucleus.

The subatomic particles in the atom are;

Neutrons and protons are contained in the nucleus hence they are collectively called nucleons.

Electrons are found in the orbits. The number of protons must be equal to the number of electrons for the atom to be electrically neutral.

The number of protons in an atom or atomic number serve as a means of identifying an atom.

Learn more; https://brainly.com/question/18460120

Answer:

Na₂SO₄

Explanation:

Barium nitrate, Ba(NO₃)₂ produce precipitate with SO₄²⁻, CO₃²⁻. That means the precipitate could be obtained from Na₂SO₄ and Na₂CO₃.

Also, magnesium nitrate, Mg(NO₃)₂, produce precipitate just with CO₃²⁻. As the unknown solution produce no precipitate, the unknown compound is:

Na₂SO₄

Answer:

[tex]m=14,105.71 g Fe[/tex]

Explanation:

Hello,

In this case, the first step is to compute the volume of the block considering the length, height and width:

[tex]V=L \times W \times H =12.5 in\times 3.50 in \times 2.50 in =109.375 in^3[/tex]

Then, we compute the volume in cubic centimetres:

[tex]V=109.375in^3\times \frac{16.3871 cm^3}{1in^3} =1792.34cm^3[/tex]

Finally, as the density is given by:

[tex]\rho =\frac{m}{V}[/tex]

We solve for the mass:

[tex]m=\rho \times V= 7.87\frac{g}{cm^3} \times 1792.34 cm^3\\\\m=14,105.71 g Fe[/tex]

Best regards.

Answer:

[tex]Q=-3.11x10^5kJ[/tex]

Explanation:

Hello,

In this case, for the given reaction, we are given the standard enthalpy of reaction per mole of ammonia that is -92.6 kJ, it means, that forming one mole of ammonia will release 92.6 kJ of energy. In such a way, for the formation of 5.71x10⁴ g of ammonia, the following amount of heat will be released:

[tex]Q=5.71x10^4gNH_3*\frac{1molNH_3}{17gNH_3}*-92.6\frac{kJ}{molNH_3}\\ \\Q=-3.11x10^5kJ[/tex]

Best regards.

The amount of the heat associated with the production of 5.71×10⁴ g of ammonia, NH₃ is –311026.732 KJ

We'll begin by calculating the number of mole in 5.71×10⁴ g of NH₃

Mass of NH₃ = 5.71×10⁴ g

Molar mass of NH₃ = 14 + (3×1) = 17 g/mol

Mole = mass / molar mass

Mole of NH₃ = 5.71×10⁴ / 17

N₂(g) + 3H₂(g) —> 2NH₃(g) ΔH°rxn = −92.6 kJ

Since reaction took place at standard conditions, it means:

1 moles of NH₃ required −92.6 kJ

Therefore,

3358.82 moles of NH₃ will require = 3358.82 × –92.6 = –311026.732 KJ

Thus, the amount of the heat associated with the production of 5.71×10⁴ g of ammonia, NH₃ is –311026.732 KJ

Learn more: https://brainly.com/question/17332795

Answer:

Explanation:

a. Determine the number of valence electrons for each atom in the molecule

In this case we both atoms are halogens. Therefore we will have 7 electrons for each atom.

b. Draw the Lewis Dot structure

In this case, the formula is [tex]ICl_3[/tex], so the central atom would be "I" and the "Cl" atoms would be placed around "I". See figure 1

c. Describe why the molecule is drawn this way (i.e. any extra rules/steps needed?)

In this specific case, the "I" atom don't follow the octet rule. We will have an expanded octet for iodine (more than 8 electrons).

d. Show the polarity of each bond and for the molecule by drawing in the dipole +d

The negative dipole would be placed in the atom with higher electronegativity, in this case "Cl". The positive dipole would be placed in the atom with low electronegativity, in this case "I".

I hope it helps!

Answer: Ga > Ca > K

Explanation:

Electronic configuration represents the total number of electrons that a neutral element contains. We add all the superscripts to know the number of electrons in an atom.

The electrons are filled according to Afbau's rule in order of increasing energies. The metals tend to get stable by losing electrons to attain noble gas configuration.

[tex]K:19:1s^22s^22p^63s^23p^64s^1[/tex]

[tex]K^+:18:1s^22s^22p^63s^23p^6[/tex]

[tex]Ca:20:1s^22s^22p^63s^23p^64s^2[/tex]

[tex]Ca^{2+}:18:1s^22s^22p^63s^23p^6[/tex]

[tex]Ga:31:1s^22s^22p^63s^23p^64s^23d^{10}4s^24p^1[/tex]

[tex]Ga^{3+}:28:1s^22s^22p^63s^23p^64s^23d^{10}[/tex]

Thus gallium (Ga) loses three electrons, Calcium (Ca) loses 2 electrons and Potassium (K) loses one electron.

Answer:

Less than 0.033 M:

[tex][Z]_{eq}=2.4x10^{-3}M[/tex]

Explanation:

Hello,

In this case, the described equilibrium is:

[tex]2A+B\rightarrow 2Z[/tex]

Thus, the law of mass action is:

[tex]K=\frac{[Z]^2}{[A]^2[B]}=0.43[/tex]

Nevertheless, given the initial concentration of Z that is 0.033 M, we should invert the equilibrium since the reaction will move leftwards:

[tex]\frac{1}{K}=\frac{[A]^2[B]}{[Z]^2}=\frac{1}{0.43}=2.33[/tex]

Know, by introducing the change [tex]x[/tex] due to the reaction extent, we can write:

[tex]2.33=\frac{(2x)^2*x}{(0.033-2x)^2}[/tex]

Which has the following solution:

[tex]x_1=2.29M\\x_2=0.0181M\\x_3=0.0153M[/tex]

But the correct solution is [tex]x_3=0.0152M[/tex] since the other solutions make the equilibrium concentration of Z negative which is not possible. In such a way, its concentration at equilibrium is:

[tex][Z]_{eq}=0.033M-2(0.0153M)[/tex]

[tex][Z]_{eq}=2.4x10^{-3}M[/tex]

Which is clearly less than 0.033 M since the addition of a product shift the reaction leftwards in order to reestablish equilibrium (Le Chatelier's principle).

Regards.

Explanation:

A Bronsted-Lowry base is a substance that accepts a proton in the form of a hydrogen (H) atom.

On the other hand;

Bronsted-Lowry acid is the substance that donates the proton.

HF (aq) + SO32- ⇌ F- + HSO3-

In the forward reaction;

Bronsted-Lowry acid : HF

Bronsted-Lowry base: SO32-

In the backward reaction;

Bronsted-Lowry acid : HSO3-

Bronsted-Lowry base: F-

The conjugate base of HF is F-

The conjugate acid of SO32- is HSO3-

Answer:

an atom with a half-filled subshell - hydrogen

an atom with a completely filled outer shell - argon

an atom with its outer electrons occupying a half-filled subshell and a filled subshell- copper

Explanation:

The outermost shell or the valence shell of the atom is the last shell in the atom. Chemical reactions occur at this outer most shell. The number of electrons on the outermost shell of an atom determines the group to which it belongs in the periodic table as well as its chemical properties.

Hydrogen has a half filled 1s sublevel. Only one electron is present in this sublevel.

Let us consider argon

1s2 2s2 2p6 3s2 3p6

The outermost ns and np levels are completely filled. Thus the outermost shell is completely filled.

In the last case; let us look at the electronic configuration of nitrogen;

1s2 2s2 2p3

The outermost 2p subshell is exactly half filled while the 2s sublevel is fully filled. The outermost shell of nitrogen is made up of 2s2 and 2p3 sublevels.

Answer:

The correct answer is 81.52 percent.

Explanation:

Based on the given information, the boiling point of pentane is 36 degree C and the boiling point of ethanol is 78 degree C. The density of pentane and ethanol is 0.63 g/ml and 0.79 g/ml. The vapor pressure of pentane at 57.2 degree C is 1439 torr and the vapor pressure of ethanol at 57.2 degree C is 326 torr.  

In the given case, 50 percent pentane by mass signifies that mass of pentane is 50 grams. Thus, the mass of ethanol will be 100-50 = 50 grams.  

The moles or n can be calculated by using the formula,  

n = weight/molecular mass

The molecular mass of pentane is 72.15 g per mol and the molar mass of ethanol is 46.07 g/mol.  

The moles of pentane is,  

= 50 g/72.15 g/mol = 0.6930 mol

The moles of ethanol is,  

= 50 g/46.07 g/mol = 1.0853 mol

The mole fraction of pentane is,  

= 0.6930 mol / (0.6930 + 1.0853) mol = 0.3897  

The mole fraction of ethanol is,  

= 1.0853 mol / (0.6930 + 1.0853) mol = 0.6103

Now the vapor pressure of solution will be,  

= pressure of pentane * mole fraction of pentane + pressure of ethanol * mole fraction of ethanol

= (1439 * 0.3897) + (326 * 0.6103)

= 759.736 torr

The vapor pressure of pentane within the solution,  

= vapor pressure of pentane * mole fraction of pentane

= 1439 torr * 0.3897

= 560.778 torr

The fraction of pentane is,  

= 560.778 / 759.736 = 0.738

Let us assume that the total mole is 1, the mole fraction of pentane is 0.738, so the mole fraction of ethanol will become, 1-0.738 = 0.262

The mass of pentane = 0.738 * 72.15 = 53.2467

The mass of ethanol = 0.262 * 46.07 = 12.07034

The percent by mass of pentane in new solution will be,  

Mass% = mass of pentane/Total mass * 100%

= 53.2467/(53.2467 + 12.07034) * 100%

= 53.2467/65.31704 * 100 %

= 81.52 %

Answer:

[HI] = 0.7126 M

Explanation:

Step 1: Data given

Kc = 54.3

Temperature = 703 K

Initial concentration of H2 and I2 = 0.453 M

Step 2: the balanced equation

H2 + I2 ⇆ 2HI

Step 3: The initial concentration

[H2] = 0.453 M

[I2] = 0.453 M

[HI] = 0 M

Step 4: The concentration at equilibrium

[H2] = 0.453 - X

[I2] = 0.453 - X

[HI] = 2X

Step 5: Calculate Kc

Kc = [Hi]² / [H2][I2]

54.3 = 4x² / (0.453 - X(0.453-X)

X = 0.3563

[H2] = 0.453 - 0.3563 = 0.0967 M

[I2] = 0.453 - 0.3563 = 0.0967 M

[HI] = 2X = 2*0.3563 = 0.7126 M

Answer:

D: CH2=CH-CH(CH3)-CH2-CH3 (R & S enantiomers)

E: CH3-CH2-(CH3)-CH2-CH3

(Please see the figures enclosed )

Explanation:

D is a racemic mixture (R & S) of 3-metyl-pent-1-ene, so it is optically inactive (although each of two enantiomers is optically active, the mixture is optically  inactive. The reason is that two enantiomers are present in an equal amount).

E is optically inactive, so its structure has to be symmetric.

Answer:

30.0 g.

Explanation:

Hello,

In this case, for us to round the given number off to three significant figures, we firstly realize it has initially five significant figures. Thus, cutting at the third digit, which is the second nine, we will have 29.9 g, nonetheless, as a five is after such nine, we should round the nine to ten, so the result is 30.0 g.

Best regards.

Answer:

The answer is B) A metal replaces a metallic ion below it on the list.

Explanation:

I just did it and got it correct, luckily I didn't use the other answer posted for this question.

A metal replaces a metallic ion below it on the list give reaction which would be predicted by the  activity series list.

So, option B is correct one.

The list in which elements arranged in the increasing order of their electrode potential values is called Electrochemical series.

The Electrochemical series is also called activity series.

To learn more about  Electrochemical series here.

https://brainly.com/question/14652325

#SPJ3