A wave has a frequency of 67 Hz and a wavelength of 7.1 meters. What is the speed of this
wave?

Answer:

v = 2.91 m/s

Explanation:

Given that,

A kayaker is paddling south at 2.50 m/s, and encounters a weird current moving 1.15 m/s west.

We need to find the resultant velocity. Both velocities are perpendicular to each other. So,

[tex]v=\sqrt{v_1^2+v_2^2} \\\\=\sqrt{2.5^2+1.5^2} \\\\=2.91\ m/s[/tex]

So, the magnitude of the resultant velocity is equal to 2.91 m/s.

Answer:

c. Double Replacement

Explanation:

As in Double Replacement reaction exchanges the cations (or the anions) of two ionic compounds.

Here, in BaCl2 , Ba has replaced with NO3 to form Ba(NO3)2

and in 2AgNo3 , Ag has replaced with Cl to form 2AgCl.

Answer:

I assume they want answer A, but it's a silly question.

Explanation:

Well, if we assume that the girls are applying equal force, as they are the same size and strength (apparently also the same resolve etc.).

Equal force in opposite directions means the composite force is null. An object that no force is applied to continues moving in the same direction, so if the doll was moving somewhere, it would keep doing so, except all of this makes no sense the doll is not in gravityless vacuum what are we even talking about.

The answer A is the least ridiculous.

Answer:

A. The water

Explanation:

i got it right on A-P-E-X

Answer:

I know you said not to do this but I am doing a challenge and You asked this an hour ago. PLS DON'T REPORT ME.

Explanation: Sorry

Answer:

The current in the new circuit is 0

Explanation:

A diode is an electronic component that allows the electric current to go only in one direction. If in the first case the current was 255 mA, and the battery was changed ( change in polarity ) no current will flow through the circuit. That change is similar or equivalent to change the diode to the no pass position

Answer:

I think c I dont know sorry if I'm wrong

Answer:

the electric field strength inside the resistor is 2.57 V/m

Explanation:

Given;

current flowing through the wire, I = 1.10 A

resistance of the wire, R = 7.00 Ω

length of the wire, L = 3.00 m

The emf created inside the resistor is calculated as;

V = IR

V = 1.10 x 7

V = 7.7 V

The electric field strength inside the resistor is calculated as;

E = V/L

E = 7.7 / 3

E = 2.57 V/m

Therefore, the electric field strength inside the resistor is 2.57 V/m

Answer:

The basic answer is sea flows. On the off chance that the air making a trip to New York moves via land, it will be cooler than the air and flows that reach, for instance, San Francisco. Along these lines, Rome is hotter than New York because of flows, topography and air development designs.

Explanation:

Brainliest?

Answer:

1.48×10⁻⁷ Newtons

Explanation:

From the question,

According to newton's law of universal gravitation.

F = Gmm'/r²........................ Equation 1

F = gravitational force, G = gravitational constant, m = mass of the first ball, m' = mass of the second ball, r = distance between the balls.

Given: m = m' = 8 kg, r = 17 cm = 0.17 m,

Constant : G = 6.67×10⁻¹¹ Nm²/kg²

Substitute these values into equation 1

F =  (6.67×10⁻¹¹×8×8)/(0.17²)

F = 1.48×10⁻⁷ N

Answer:

Explanation:

Point of zero velocity are extreme points situated on either side of equilibrium position .

a )

Time taken to travel between these two points is .15 s

time for half the oscillation = .15 s

Time for full one oscillation = .30 s .

Time period of oscillation = .30 s

b)

frequency = 1 / time period

= 1 / .30s = 3.33 oscillation per second.

c )

Distance between these two point is equal to two times amplitude

2 x amplitude = 30 cm

amplitude = 15 cm

Answer:

D

Explanation:

its D

Answer:

10.1 m/s

Explanation:

By Newton's third law, the force on the squid and that due to the water expelled form an action reaction pair.

And by the law of conservation of momentum,

initial momentum of squid + expelled water = final momentum of squid + expelled water.

Now, the initial momentum of the system is zero.

So, 0 = final momentum of squid + expelled water

0 = MV + mv where M = mass of squid = 6.50kg, V = velocity of squid = 2.40m/s, m =mass of water in cavity = 1.55 kg and v = velocity of water expelled

So, MV + mv = 0

MV = -mv

v = -MV/m

= -6.50 kg × 2.40 m/s ÷ 1.55 kg

= -15.6 kgm/s ÷ 1.55 kg

= -10.1 m/s

So, speed must it expel this water to instantaneously achieve a speed of 2.40 m/s to escape the predator is 10.1 m/s

Answer:

c) The impulse is the same in both cases.

Explanation:

What drives the car is the amount of movement of the car during its journey. In this case, we can consider that in the car, presented in the question above, the movement is generated through speed and friction on the track, the impact that makes the car stop, is not part of the movement and therefore, not part of the impulse. In the two situations presented, the speed of the car is the same, the same car and the same track were also used, which shows us that the impulse, in both situations, is the same.

A car making this turn is pulled downward by its own weight, and pushed up by the road at an angle of 45°, so by Newton's second law,

• the net horizontal force on the car is

∑ F = N cos(45°) = m a = m v ² / R

• the net vertical force on the car is

∑ F = N sin(45°) - m g = 0

where

• N = magnitude of the normal force

• m = mass of the car

• a = v ² / R = centripetal acceleration of the car

• v = tangential speed of the car

• R = 100 m = radius of curvature

• g = 9.8 m/s² = acceleration due to gravity

From the net vertical force equation, we get

N = m g / sin(45°)

and substituting this into the net horizontal force equation and solving for v gives

(m g / sin(45°)) cos(45°) = m v ² / R

v = √(R g cos(45°) / sin(45°)) ≈ 31 m/s

We have that A highway curve of radius 100 m, banked at an angle of 45 degrees, may be negotiated without friction at a speed of

V=32m/s

From the question we are told

a highway curve of radius 100 m, banked at an angle of 45 degrees, may be negotiated without friction at a speed of:

Generally the equation for the Velocity is mathematically given as

[tex]V=\sqrt{rgtan\theta}[/tex]

Therefore

[tex]V=\sqrt{rgtan\theta}\\\\V=\sqrt{100*9.8*tan45}\\\\V=32m/s[/tex]

Therefore

A highway curve of radius 100 m, banked at an angle of 45 degrees, may be negotiated without friction at a speed of

V=32m/s

For more information on this visit

https://brainly.com/question/6201432?referrer=searchResults

Answer:

6.26 m/s

Explanation:

Since we are neglecting viscous losses and surface tension effects in the liquid jet, by conservation of energy, the potential energy loss of the jet = kinetic energy gain of the jet

So, mgh = 1/2mv² where m = mass of water in jet, g = acceleration due to gravity = 9.8 m/s², h = height of outlet = 2.0 mand v = velocity of liquid jet

So, mgh = 1/2mv²

gh = 1/2v²

v² = 2gh

v = √(2gh)

v = √(2 × 9.8 m/s² × 2.0 m)

v = √(39.2 m²/s²)

v = 6.26 m/s

Answer:

You can breathe in too much carbon monoxide, which will eliminate the flow of oxygen to your bloodstream and can kill you.

Explanation:

In a ocean full of storms

A new wave was born

Deep into that darkness flooding

Suddenly, I heard some pummeling

By the grave I saw the winds

And the sun just shined

Answer:

a friendly face that comes with waves,

the waves of all the memorial days,

and with these days we smile with pride,

as for the waves we used to ride,

given up the day has passed,

how it went away like an hour glass,

as if we knew the world was right,

just like the waves, oh so bright,

the time has come the days have passed,

the waves ashore the waves alast,

as if the friendly face was right,

the waves that rode, oh goodnight.

Answer:

The third approach to cross-cultural studies of personality is the combined approach, which serves as a bridge between Western and indigenous psychology as a way of understanding both universal and cultural variations in personality

Explanation:

Answer:

The third approach to cross-cultural studies of personality is the combined approach, which serves as a bridge between Western and indigenous psychology as a way of understanding both universal and cultural variations in personality

Answer:

6 - iron

7 - by stringing many magnets together

Explanation:

6 - substances such as iron, cobalt, and nickel, most of the electrons spin in the same direction. This makes the atoms in these substances strongly magnetic—but they are not yet magnets. ... The piece of iron has become a magnet. Some substances can be magnetized by an electric current.

7 - it is that only

(a) The magnitude of the wheels angular acceleration is 0.0088 rad/s².

(b) The magnitude of the tangential acceleration after the maximum operational speed is reached is 0.153 m/s².

The angular acceleration of the wheel is calculated as follows;

α = ω/t

ω = v/r

α = v/(rt)

α = (2.3)/(17.5 x 15)

α = 0.0088 rad/s²

a = v/t

a = (2.3)/15

a = 0.153 m/s²

Learn more about angular acceleration here: https://brainly.com/question/25129606

#SPJ6

A 4.0 kg block is moving at 5.0 m/s along a horizontal frictionless surface toward an ideal spring that is attached to a wall, the maximum speed of the block when the spring is compressed to one-half of the maximum distance is 4.33 m/s

From the conservation of energy; the kinetic energy of the mass is equal to the work done on the spring.

i.e.

[tex]\mathbf{\dfrac{1}{2} mv^2 = \dfrac{1}{2}kx^2_{max}}[/tex]

Given that:

∴

From the equation above, multiplying both sides with 2, we have:

[tex]\mathbf{mv^2 =kx^2_{max}}[/tex]

Making (k) the subject of the formula;

[tex]\mathbf{k = \dfrac{mv^2}{x^2_{max}}}[/tex]

[tex]\mathbf{k = \dfrac{4 \times 5^2}{0.68^2}}[/tex]

k = 216.26 N/m

However, when compressed to one-half of the maximum distance; the speed is computed as follows:

x = 0.68/2 = 0.34 m

∴

[tex]\mathbf{\dfrac{1}{2}mv_o^2 - \dfrac{1}{2}mv^2 = \dfrac{1}{2}kx^2}[/tex]

[tex]\mathbf{m(v_o^2 -v^2) =kx^2}[/tex]

[tex]\mathbf{(v_o^2 -v^2) =\dfrac{kx^2}{m}}[/tex]

[tex]\mathbf{(5^2 -v^2) =\dfrac{216.26 \times 0.34^2}{4.0}}[/tex]

25 - v² = 6.25

25 -6.25 = v²

v² = 18.75

[tex]\mathbf{ v= \sqrt{18.75 }}[/tex]

v = 4.33 m/s

Therefore, we can conclude that the speed of the block when the spring is compressed to only one-half of the maximum distance is 4.33 m/s

Learn more about speed here:

https://brainly.com/question/22610586?referrer=searchResults

Answer: 550 cm

Explanation:

Original equation: 1/f= 1/do + 1/di.

F=50.0 cm, and do=55.0.

Since we don't have di, we'll have to subtract do to the other side, making the equation: 1/f - 1/do= 1/di.

Doing the math, 1/f - 1/do is 0.0018181818

Then to get di by itself, you multiply both sides by di. Then you divide by 0.0018181818 to get di by itself. You then get: di= 1/0.0018181818

At that point, you just divide 1 by 0.0018181818, which will give you 550 cm

There could be simpler way, but that is just what I did to get the answer. Answer was right on Acellus

Answer:

Explained below.

Explanation:

We are told that the surface material is ejected into space at a high speed. This means that it will have a likely high momentum as well.

Now, we can say that the total momentum is conserved because the entire asteroid system behaves like an isolated system.

Also, as the surface material is moving with the high momentum like we established earlier, it will cause the asteroid to move with a speed in an opposite direction which also means deflection in an opposite direction.

Answer:

Explained below.

Explanation:

The material ejected from the surface of the asteroid would have a significant momentum. Since the asteroid and all its material is an isolated system, the ejection would cause an oppositely directed change in momentum of the asteroid, according to the law of conservation of momentum.

The ejected material is analogous to gases expelled from a rocket, and the asteroid is analogous to a rocket.

Answer:

150m

Explanation:

The relation of speed/time and distance/time is a derivative/integral one, as in speed is the derivative of distance (the faster you go, the faster the distance changes, duh!).

So we need to compute the integral of speed over time from 0.0s to 5.0s.

The easiest way here is to compute the area under the line (it's going to be faster than computing the acceleration and using a formula of distance based on acceleration).

The area under the line is a trapezoid with "height" 5s, and the bases 10m/s and 50m/s. Using the trapezoid area formula of h*(a + b)/2

distance = 5s * (10m/s + 50m/s) / 2 = 5s * 60m/s / 2 = 5s * 30m/s = 150m

Alternatively, we can use the acceleration formula:

a = (50m/s - 10m/s)/5s = 40m/s / 5s = 8m/s^2

distance = v0 * t + a * t^2 / 2 = 10m/s * 5s + 8m/s^2 * (5s)^2 / 2 = 50m + 8m * 25 / 2 = 50m + 100m = 150m.