The effort must move 8•0
What is an electron?
Answer:
A stable subatomic particle with a charge of negative electricity, found in all atoms and acting as the primary carrier of electricity in solids.
Explanation:
In more simple terms, an electron is a negatively charged subatomic particle.
Hope that helps :)
Answer:
An electron is a particle with negative charge that can be found in the atom, along with neutrons and protons
Which device will allow you to reduce the voltage from 120 vac to vdc in order to charge a cell phone?
1- a diode
2- a fuse
3- a transformer
4- An alternator
A is a n alternator device that will allow you to reduce the voltage from 120 vac to vdc in order to charge a cell phone. the correct option is option 4.
What is voltage?Voltage is a measure of electric potential energy every unit charge. If an electrical charge is placed at a certain spot, the voltage demonstrates the potential energies of just that charge at that location.
To put it another way, it is a measure of the energy stored inside an electric field or perhaps an electric circuit at a certain position. It is the labor required every unit charge against it electric field to transport the charge from one location to another.
Therefore, a is a n alternator device that will allow you to reduce the voltage from 120 vac to vdc in order to charge a cell phone. the correct option is option 4.
To know more about voltage, here:
https://brainly.com/question/13577056
#SPJ2
Plz help me I will give brainliest
Kinetic vs potential energy
Answer:
Kinetic energy is the energy obtained from movement while potential energy is the energy in something when it is at a height or has been manipulated in some way; it has work done to it.
Explanation:
Kinetic energy is, like I said, energy gained through movement or action. When an object stops moving, it converts into a different type of energy. Energy cannot be destroyed or created. An object with potential energy has a reference. A reference determines how high it is. The higher and heavier an object is, the more potential energy it has.
Hope this helps!
Which choice correctly defines magnetic poles? the points on the end of magnet, where the magnetic field is strongest the point on a magnet where one magnetic field cancels out another magnetic field the middle of a magnet where the magnetic field is zero different ends of a magnet where the magnetic field is weakest
Answer:
A. The points on the end of magnet, where the magnetic field is strongest.
Explanation:
A magnet is a substance that has the ability to attract magnetic materials, e.g iron, steel etc. It comprises of two poles (north-N and south-S) each at its two ends. The N-pole and S-pole are the points on a magnet that have the strongest magnetic field. The magnetic fields originates from the north pole, and terminates in the south pole of a magnet.
When the poles of two different magnets are brought close together, attraction or repulsion may occur.
The option that defines the magnetic poles is the points on the end of the magnet, where the magnetic field is strongest.
What is a magnetic field?Attracting other iron-containing objects or aligning themselves in a magnetic field.
There are two poles of the magnet;
1. the North Pole.
2. the South Pole.
The same poles repel each other, while the opposite poles attract each other.
Thus, the correct option is A.
To learn more about the magnet, refer to the link;
brainly.com/question/13026686
How did Robert Whittaker change classification?
He created an organizational hierarchy.
He classified organisms as plants or animals.
He added the Phylum and Family levels.
He reorganized life into five kingdoms.
Answer:
d
Explanation:
A car travels 19 km in 30 minutes. What was its speed in km/hour?
HURRY WILL MARK BRAINLIST
19km in 30mins
1 hour is twice of 30 mins.
Twice the time means twice the distance.
therefore 2(19km) in 2(30 mins)
19km in 30mins = 38km/hour
6)Two forces are acting on 0.5-kg soccer ball.A is 230N and B is 250N.what is the acceleration of the soccer ball?
Answer:
B)
Explanation:
A man carries a load of mass 2.6kg from one end of a uniform pole 100cm long which has a mass 0.4kg. The pole rest on his shoulder at a point 60.0cm from the load and he holds it by the other end. What vertical force must be applied by his hand and what is the force on his shoulder?
Answer:
F = 39.2 N (hand force) and N = 68.6 N (shoulder force)
Explanation:
In this exercise we must use the rotational and translational equilibrium conditions, we have several forces: the weight (W) of the pole applied at its geometric center, the load (w1) at one end, the shoulder support (N) 60 cm from the load and hand force (F) at the other end of the pole
Let's set the reference system at the fit point of the shoulder
∑ τ = 0
We will assume that the counterclockwise turns are positive
w₁ 0.60 + W 0.1 + F₁ 0 - F 0.4 = 0
all distances are measured from the support of the man (x₀ = 0.60 m)
F = (w₁ 0.60 + W 0.1) / 0.4
F = (m₁ 0.6 + m 0.1) g / 0.4
let's calculate
F = (2.6 0.6 + 0.4 0.1) 9.8 / 0.4
F = 39.2 N
this is the force that the hand must exert to keep the system in balance
We apply the translational equilibrium condition
-w₁ -W + N - F = 0
N = w₁ + W + F
N = (m₁ + m) g + F
let's calculate
N = (2.6 + 0.4) 9.8 + 39.2
N = 68.6 N
why are annowwhisker used to repel stains on fabrics
Answer:Because it makes the stains like go away which makes the fabrics get not stained so yeah
which term describes an object moving in two dimensions as it is acted on by gravity
Answer:
motion
Explanation:
Answer:
Projectile Motion
Explanation:
A p e x
A roller coaster is stopped on a track. When the engineer presses a launch button on the coaster, the coaster moves forward. Explain this change in terms of balanced and unbalanced forces.
Compute the electric charge on the surface which is the portion of the cone z = 3x2 + 3y2 in the first octant that lies between the planes z = 2 and z = 6. The charge density on the surface is given by σ(x, y, z) = xyz2 coulombs per square meter.
Answer:
9828 coulombs
Explanation:
z = [tex]\sqrt{3x^2 + 3y^2}[/tex]
Relation between the cartesian and polar coordinates
x = r cos ∅
y = r sin ∅
z = [tex]\sqrt{3x^2 + 3y^2}[/tex] = [tex]\sqrt{3r}[/tex]
next we calculate the surface charge density of the cone
б ( r, ∅ ) = xyz^2 = 3r^4 sin∅ cos∅
Charge given as
Q = ∫ б(r,∅ )ds
= ∫ б(r,∅ ) [tex]\sqrt{1 +( \frac{dz}{dx})^2 + (\frac{dz}{dx} )^2 } dA[/tex]
after integration
Q = ∫ б(r,∅ ) 2dA
Attached below is the remaining part of the solution
The force that causes an object to follow a
circular path is
tion:
at o
1. an inertiali force.
2. a centripetal force.
3. a gravitational force.
CI
nents
stant
4. a fluid force.
Answer:
2.a centripetal force.
!!please help !!!!! I’ll give brainliest
Answer:
45 degrees
Explanation:
a projectile travels the farthest when it is launches at the angle of 45 degree.
The number of wavelengths that pass a point each per second is:
A. transverse wave
B. period
C. longitudinal
D. frequency
Pls can you help me
Explanation:
d frequency I learned it last year
The number of wavelengths that pass a point each second is referred to as the frequency of a wave. The correct option is D.
What is the frequency?Frequency is defined as the number of cycles (or wavelengths) that pass a point in one second and is measured in units of Hertz (Hz). For example, if a wave has a frequency of 10 Hz, it means that 10 complete cycles (or 10 wavelengths) pass a point in one second.
A transverse wave is a type of wave where the particles of the medium move perpendicular to the direction of the wave motion. Examples of transverse waves include light waves and electromagnetic waves.
Period refers to the time it takes for one complete cycle of a wave to occur. It is measured in units of seconds (s) and is the reciprocal of the frequency. So, period and frequency are inversely proportional to each other.
A longitudinal wave is a type of wave where the particles of the medium move parallel to the direction of the wave motion. Examples of longitudinal waves include sound waves and seismic waves.
So, the number of wavelengths that pass a point each second is known as the frequency of a wave and is measured in units of Hertz (Hz).
Therefore, the correct answer is D. frequency.
To learn about the relationship between wave energy and amplitude click:
https://brainly.com/question/17003906
#SPJ3
Work out the current through an electric kettle with a power of 2.2 kW if it uses the 180 V mains supply. Round your answer to 2 significant figures.
Answer:
12 A
Explanation:
Given,
Power of electric kettle=2.2 kW=2200W (since 1kW=1000W)
Voltage=180V
Current=?
Power = Voltage*Current
Current = Power ÷ Voltage
=2200W ÷ 180V
=12.22 Ampere
=12 A
The amount of current moving through the electric kettle with the given power and voltage is 12A.
Given the data in the question;
Power; [tex]p = 2.2kW = 2200W[/tex]Voltage; [tex]V = 180V[/tex]
Using the the power law equation:
Electrical power is the product of voltage and current:
[tex]P = V * I[/tex]
Where V is voltage and I is current
We substitute our given values into the equation
[tex]2200W = 180V * I\\\\I = \frac{2200W}{180V} \\\\I = 12.22A\\\\I =12A[/tex]
Therefore, the amount of current moving through the electric kettle with the given power and voltage is 12A.
Learn more: https://brainly.com/question/21653855
Part 2: Identify the independent, dependent, and constant variables
Experiment 1: A soap manufacturer runs an experiment to compare the foaming action of different dish detergents. Equal
amounts of each brand of detergent are placed in identical containers half-filled with water. The water and dish detergent are at
a temperature of 20°Celsius. Each container is agitated for 30 seconds, and then the height of the foam is measured.
a. independent variable:
b. dependent variable:
C. constant variable(s):
How are density and buoyancy related to each other?
Answer:
Buoyant force is directly proportional to the density of the fluid in which an object is immersed. Buoyancy is the tendency to rise or float in a fluid. The upward force exerted on objects submerged in fluids is called the buoyant force. where ρ is the density, V is the volume, and m is the mass of the displaced fluid.
Explanation:
Answer:
well It means the plant cells inside of a organism
In sea-floor spreading, molten material rises from the mantle and erupts in the...
Answer:
along mid ocean ridges
Explanation:
In 1960, Harry Hess came up with the discovery that the floor of the oceans undergoes a movement. This movement is similar to that of being a conveyor belt. In this movement, continents are moved along with the oceans. The molten materials moves up to the mid-ocean ridge where it spreads and erupts. In this process the molten materials pushes the rocks sideways thereby emerging out from the mantel. The freezing of the molten material formed new rocks. This process is termed to be sea-floor spreading.
What is the density of 15 cm3 and 3 g?
Answer:
0.2
Explanation:
3/15
What is the average acceleration of a tennis ball that has an initial velocity of 6.0 m/s [E] and a final velocity of 7.3 m/s [W], if it is in contact with a tennis racket for 0.094 s?
Given :
The average acceleration of a tennis ball that has an initial velocity of 6.0 m/s.
and a final velocity of 7.3 m/s.
It is in contact with a tennis racket for 0.094 s
To Find :
The average acceleration of the tennis ball.
Solution :
We know, average acceleration is given by :
[tex]a_{avg}=\dfrac{Final \ velocity-Initial\ velocity}{Time\ Taken}\\\\a_{avg}=\dfrac{7.3-6.0}{0.094}\ m/s^2\\\\a_{avg}=13.83\ m/s^2[/tex]
Therefore, average velocity is given by 13.83 m/s².
Hence, this is the required solution.
Hand washing is important especially in this time of pandemic
A compressed spring does not have elastic potential energy.
O True
O False.
help please
Answer:
False
Explanation:
The second you let go its gonna release kinetic energy that's why it's potential
A ball that is out of play is called a __________________. 2. Volleyballs are made out of __________________ material. 3. A __________________ occurs when the server steps on or over the end line. 4. Contact of the ball by a player is called __________________. 5. The __________________ decides who will serve and the choice of playing area.
Answer:
1) Deadball
2) Leather
3) Foot Fault
4) Pass
5) Captain
Explanation:
1) In most sports when a ball is out of play or termed temporarily unplayable, it is said to be a Deadball.
2) Volleyballs are generally made of leather materials be it synthetic or genuine leather.
3) In volleyball, when a server steps on or over the end line, it is called foot fault.
4) The first contact of a ball by a player after a serve from a passer is usually called a pass.
5) In volleyball, the referee issues a coin toss in presence of both captains and the captain with the winning toss is the one that makes the choice of play area and the first server.
Why does a liquid thermometer work
Why are bubbles round?
(A serious physics question)
Answer:
The Science of Round Bubbles
But once a bubble is sealed and removed from the wand, the tension in the bubble shrinks it to the smallest possible shape for the volume of air inside of it. That's a sphere, which is the familiar round shape we see when bubbles float through the air.
Explanation:
In Stage 4 sleep, what type of brain waves do you have?
A. Delta
B. Beta
C. Spindle waves
D. Neural
a) the answer is delta waves i think
Answer:
A
Explanation:
I will mark brainliest if right :)
Which features do sound waves have that ocean and light waves do not? Check all that apply.
compressions
rarefactions
amplitude
wavelength
crests
frequency
speed
(I know one is compressions but I can't figure out the others and i don't want to get it wrong, please help!!)
Answer:
Explanation:
compressions and rarefactions
Answer:
Compressions
-and-
Rarefactions
Explanation:
The si unit of average speed is m.s. True or False. anyone who is right I will give him brainlist if you are sure
True
Explanation:
Average speed is a scalar magnitude as opposed to average velocity which is a vector. The unit of measurement in the International System (S.I.) of the average speed is the meter per second (m/s).