Answer:
The molarity is 0.359[tex]\frac{moles}{L}[/tex]
The molality is 0.354 [tex]\frac{moles}{kg}[/tex]
The mass percent of the solution es 3.45%
Explanation:
Molarity is a unit of concentration that indicates the amount of moles of solute that appear dissolved in each liter of the mixture. It is determined by:
[tex]Molarity (M)=\frac{number of moles of solute}{volume}[/tex]
Being:
K: 39 g/moleN: 14 g/moleO: 16 g/moleThe molar mass of KNO₃ is:
KNO₃= 39 g/mole + 14 g/mole + 3*16 g/mole= 101 g/mole
You can apply the following rule of three: if 101 grams of KNO₃ are present in 1 mole, 72.5 grams in how many moles are present?
[tex]moles of KNO_{3}=\frac{72.5 grams*1 mole}{101 grams}[/tex]
moles of KNO₃= 0.718
So you have:
moles of KNO₃= 0.718volume= 2 LApplying this quantity in the definition of molarity:
[tex]molarity=\frac{0.718 moles}{2 L}[/tex]
Molarity= 0.359[tex]\frac{moles}{L}[/tex]
The molarity is 0.359[tex]\frac{moles}{L}[/tex]
Molality is a way of measuring the concentration of solute in solvent and indicates the amount of moles of solute in each kilogram of solvent.
Then the molality is calculated by:
[tex]Molality=\frac{moles of solute}{mass of solvent in kilograms}[/tex]
Density is defined as the property that matter, whether solid, liquid or gas, has to compress in a given space. That is, it is the amount of mass per unit volume. So, if the density of 1.05 g / mL for the solution indicates that in 1 mL of solution there are 1.05 grams of solution, in 2000 mL (where 2L = 2000 mL, because 1 L = 1000mL) how much mass is there?
[tex]mass=\frac{2000 mL*1.05 grams}{1 mL}[/tex]
mass= 2100 grams
Since mass solution = mass water + mass KNO₃
then mass water = mass solution - mass KNO₃
Being mass solution 2100 grams and mass KNO₃ 72.5 grams, and replacing you get: mass water= 2100 grams - 72.5 grams
mass water= 2,027.5 grams
Then, being:
moles of KNO₃= 0.718mass of solvent in kilograms= 2.0275 kg (being 2,027.5 grams= 2.0275 kilograms because 1,000 grams= 1 kilogram)Replacing in the definition of molality:
[tex]molality=\frac{0.718 moles}{2.0275 kg}[/tex]
molality= 0.354 [tex]\frac{moles}{kg}[/tex]
The molality is 0.354 [tex]\frac{moles}{kg}[/tex]
The mass percent of a solution is the number of grams of solute per 100 grams of solution. Then the mass percent is the mass of the element or solute divided by the mass of the compound or solute and the result of which is multiplied by 100 to give a percentage.
[tex]mass percent=\frac{mass of solute}{mass of solution} *100[/tex]
So, in this case:
[tex]mass percent=\frac{72.5 grams}{2100 grams} *100[/tex]
mass percent= 3.45 % KNO₃ by mass
The mass percent of the solution es 3.45%
The molarity of the solution is 0.36 mol/L. The molality of the solution is 0.34 m. The mass percent of the solution is 3.33%.
Number of moles of KNO3 = mass/molar mass = 72.5 g/101 g/mol = 0.72 moles
Molarity = Number of moles / volume = 0.72 moles/ 2.00 L = 0.36 mol/L
The molality = Number of moles of solute/Mass of solution in kilograms
mass of solution = 1.05 g/mL × 2000 mL = 21000 g or 2.1Kg
Molality of solution = 0.72 moles/2.1 Kg = 0.34 m
Mass percent of solution = mass of solute/mass of solution × 100/1
Mass percent of solution = 72.5 g/ (72.5 g + 2100 g) × 100/1
= 3.33%
Lear more:https://brainly.com/question/11897796
Constructive interference occurs when the compression of one wave meets
up with the compression of a second wave.
A. True
B. False
Answer:
True
Explanation:
What would form a solution?
O A. Mixing two insoluble substances
O B. Mixing a solute and a solvent
O C. Mixing a solute and a precipitate
O D. Mixing two solutes together
Which of the compounds below are amines?
1. H4C-NH-CH3
2. H3C-NH-C-CH3
H2C-CH3
1 +
H3C-CH2-N-CH3
CH3
N
3. H
4.
Answer:
1. H4C-NH-CH3
2. H3C-NH-C-CH3
H2C-CH3
1 +
H3C-CH2-N-CH3
CH3
N
3. H
4.
.
.
.
.
.
.
Enter your answer in the provided box. To make use of an ionic hydrate for storing solar energy, you place 409.0 kg of sodium sulfate decahydrate on your house roof. Assuming complete reaction and 100% efficiency of heat transfer, how much heat (in kJ) is released to your house at night
Answer:
409.0 kg of sodium sulfate decahydrate will produce 4.49×10⁵ kJ
of heat energy.
Explanation:
CHECK THE COMPLETE QUESTION BELOW
To make use of an ionic hydrate for storing solar energy, you place 409.0 kg of sodium sulfate decahydrate on your house roof. Assuming complete reaction and 100% efficiency of heat transfer, how much heat (in kJ) is released to your house at night? Note that sodium sulfate decahydrate will transfer 354 kJ/mol
EXPLANATION
Here we were asked to calculate the amount of heat will be generated by 409.0 kg of sodium sulfate decahydrate at night assuming there Isa complete reaction and 100% efficiency of heat transfer in the process
The molecular weight of sodium sulfate decahydrate (H₂₀Na₂O₁₄S) is needed here, so it must be firstly calculated.
The molecular weight of sodium sulfate decahydrate (H₂₀Na₂O₁₄S)
( 1*20) + (22.98*2) + (16*14)+ (32*14)= 322.186 g/mol.
Thus 409.0 kg of H₂₀Na₂O₁₄S will have a value which is equivalent to = (409000g)/(322.186 g/mol.)
=1269.453mol of H₂₀Na₂O₁₄S.
But it was stated in the the question that per mole of H₂₀Na₂O₁₄S will transfer 354 kJ heat.
Therefore, 1269.453mol will transfer 1269.453× 354 kJ = 4.49×10⁵ kJ of heat.
Hence, 409.0 kg of sodium sulfate decahydrate will produce
4.49×10⁵ kJ of heat energy.
If 196L of air at 1.0 atm is compressed to 26000ml, what is the new pressure
Answer:
7.5 atm
Explanation:
Initial pressure P1 = 1.0 ATM
Initial volume V1= 196 L
Final pressure P2= the unknown
Final volume V2= 26000ml or 26 L
From Boyle's law we have;
P1V1= P2V2
P2= P1V1/V2
P2= 1.0 × 196/26
P2 = 7.5 atm
Therefore, as the air is compressed, the pressure increases to 7.5 atm.
which best describes a mixture.
A it has a single composition and it has a set of characteristics
B it can have different compositions but it has a set of charactaristics that does not change
C it has a single composition but it has a set of characteristics that does change
D it can have different compositions and it has a set of characteristics that does change
Answer:
B) It can have different compositions, but it has a set of characteristics that does not change.
Explanation:
On e d g e n u i t y
I believe the answer is d lmk if im wrong or right
In general,for a gas at a constant volume?
Answer:
The pressure of a gas is directly proportional to its Kelvin temperature if the volume is kept constant. At constant volume and temperature, the total pressure exerted by a mixture of gases is equal to the sum of the partial pressures of the component gases.
Explanation:
What is Keq for the reaction 2HCl(9) = H2(g) + Cl2(g)?
Answer:
Keq= [(Cl2) (H2)] / (HCl)^2
Explanation:
Equilibrium Constant, Keq, is written as products/reactants.
So it's going to be Keq= [(Cl2) (H2)] / (HCl)^2
A chemistry student weighs out of an unknown solid compound and adds it to of distilled water at . After minutes of stirring, only some of the has dissolved. The student drains off the solution, then washes, dries and weighs the that did not dissolve. It weighs 0.570 kg.
Required:
a. Using the information above, can you calculate the solubility of X?
b. If so, calculate it. Remember to use the correct significant digits and units. .
Complete Question
A chemistry student weighs out 0.950 kg of an unknown solid compound and adds it to 2.00 L of distilled water at . After minutes of stirring, only some of the has dissolved. The student drains off the solution, then washes, dries and weighs the that did not dissolve. It weighs 0.570 kg.
Required:
a. Using the information above, can you calculate the solubility of X?
b. If so, calculate it. Remember to use the correct significant digits and units. .
Answer:
a
Yes the solubility of X can be calculated this is because the solubility of a substance dissolved in a solution is the amount of that substance that is needed to saturate 1 unit volume of the solvent solution at that given temperature.
And from our question we see that substance X saturated the solvent and there is still remained undissolved substance X
b
The solubility of X is [tex]S = 190 g /L[/tex]
Explanation:
From the question we are told that
The initial mass of the unknown solid is [tex]m_i =0. 950 \ kg[/tex]
The mass of the undissolved substance is [tex]m_u = 0.570 \ kg[/tex]
The volume of the solution is [tex]V =2.00\ L[/tex]
Yes the solubility of X can be calculated this is because the solubility of a substance dissolved in a solution is the amount of that substance that is needed to saturate 1 unit volume of the solvent solution at that given temperature.
And from our question we see that substance X saturated the solvent and there is still remained undissolved substance X
The mass of the substance that dissolved ([tex]m_d[/tex] ) is mathematically represented as
[tex]m_d = m_i - m_u[/tex]
[tex]m_d = 0.95 - 0.570[/tex]
[tex]m_d = 0.38 \ kg = 0.38 *1000 = 380 g[/tex]
The solubility of this substance (X) is mathematically represented as
[tex]S = \frac{m_d}{V}[/tex]
substituting values
[tex]S = \frac{ 380}{2}[/tex]
[tex]S = 190 g /L[/tex]
Ammonia will decompose into nitrogen and hydrogen at high temperature. An industrial chemist studying this reaction fills a tank with of ammonia gas, and when the mixture has come to equilibrium measures the amount of nitrogen gas to be 13. mol. Calculate the concentration equilibrium constant for the decomposition of ammonia at the final temperature of the mixture.
Complete Question
The complete question is shown on the first uploaded image
Answer:
The concentration equilibrium constant is [tex]K_c = 14.39[/tex]
Explanation:
The chemical equation for this decomposition of ammonia is
[tex]2 NH_3[/tex] ↔ [tex]N_2 + 3 H_2[/tex]
The initial concentration of ammonia is mathematically represented a
[tex][NH_3] = \frac{n_1}{V_1} = \frac{29}{75}[/tex]
[tex][NH_3] = 0.387 \ M[/tex]
The initial concentration of nitrogen gas is mathematically represented a
[tex][N_2] = \frac{n_2}{V_2}[/tex]
[tex][N_2] = 0.173 \ M[/tex]
So looking at the equation
Initially (Before reaction)
[tex]NH_3 = 0.387 \ M[/tex]
[tex]N_2 = 0 \ M[/tex]
[tex]H_2 = 0 \ M[/tex]
During reaction(this is gotten from the reaction equation )
[tex]NH_3 = -2 x[/tex](this implies that it losses two moles of concentration )
[tex]N_2 = + x[/tex] (this implies that it gains 1 moles)
[tex]H_2 = +3 x[/tex](this implies that it gains 3 moles)
Note : x denotes concentration
At equilibrium
[tex]NH_3 = 0.387 -2x[/tex]
[tex]N_2 = x[/tex]
[tex]H_2 = 3 x[/tex]
Now since
[tex][NH_3] = 0.387 \ M[/tex]
[tex]x= 0.387 \ M[/tex]
[tex]H_2 = 3 * 0.173[/tex]
[tex]H_2 = 0.519 \ M[/tex]
[tex]NH_3 = 0.387 -2(0.173)[/tex]
[tex]NH_3 = 0.041 \ M[/tex]
Now the equilibrium constant is
[tex]K_c = \frac{[N_2][H_2]^3}{[NH_3]^2}[/tex]
substituting values
[tex]K_c = \frac{(0.173) (0.519)^3}{(0.041)^2}[/tex]
[tex]K_c = 14.39[/tex]
Calculate the osmotic pressure of a solution prepared by dissolving 65.0 g of Na2SO4 in enough water to make 500 mL of solution at 20°C. (Assume no ion pairing – in other words, assume that the electrolyte completely dissociates into its constituent ions.)
Answer:
66.0 atm
Explanation:
We can calculate the osmotic pressure (π) using the following expression.
[tex]\pi = i \times M \times R \times T[/tex]
where,
i: van 't Hoff indexM: molarityR: ideal gas constantT: absolute temperatureStep 1: Calculate i
Sodium sulfate completely dissociates according to the following equation.
Na₂SO₄ ⇒ 2 Na⁺ + SO₄²⁻
Since it produces 3 ions, i = 3.
Step 2: Calculate M
We can calculate the molarity of Na₂SO₄ using the following expression.
[tex]M = \frac{mass\ of\ solute }{molar\ mass\ of\ solute\ \times liters\ of\ solution} = \frac{65.0g}{142.04g/mol \times 0.500L} =0.915M[/tex]
Step 3: Calculate T
We will use the following expression.
K = °C + 273.15
K = 20°C + 273.15 = 293 K
Step 4: Calculate π
[tex]\pi = 3 \times 0.915M \times \frac{0.08206atm.L}{mol.K} \times 293K =66.0 atm[/tex]
(a) show that the pressure exerted by a fluid P (in pascals) is given by P= hdg, where h is the column of the fluid in metres, d is density in kg/m3, and g is the acceleration due to gravity (9.81 m/s2). (Hint: see appendix 2.). (b) The volume of an air bubble that starts at the bottom of a lake at 5.24 degree celsius increases by a factor of 6 as it rises to the surface of water where the temperature is 18.73 degree celsius and the air pressure is 0.973 atm. The density of the lake water is 1.02 g/cm3. Use the equation in (a) to determine the depth of the lake in metres.
Answer:
56.4 m
Explanation:
volume increases by factor of 6, i.e [tex]\frac{V2}{V1}[/tex] = 6
Initial temperature T1 at bottom of lake = 5.24°C = 278.24 K
Final temperature T2 at top of lake = 18.73°C = 291.73 K
NB to change temperature from °C to K we add 273
Final pressure P2 at the top of the lake = 0.973 atm
Initial pressure P1 at bottom of lake = ?
Using the equation of an ideal gas
[tex]\frac{P1V1}{T1}[/tex] = [tex]\frac{P2V2}{T2}[/tex]
P1 = [tex]\frac{P2V2T1}{V1T2}[/tex] = [tex]\frac{0.973*6*278.24}{291.73}[/tex]
P1 = 5.57 atm
5.57 atm = 5.57 x 101325 = 564380.25 Pa
Density Ρ of lake = 1.02 g/[tex]cm^{3}[/tex] = 1020 kg/[tex]m^{3}[/tex]
acceleration due to gravity g = 9.81 [tex]m/s^{2}[/tex]
Pressure at lake bottom = pgd
where d is the depth of the lake
564380.25 = 1020 x 9.81 x d
d = [tex]\frac{564380.25}{10006.2}[/tex] = 56.4 m
Which best describes thermal energy? It is the difference between internal energies of two or more substances. It is the sum of internal energies of two or more substances. It is the portion of internal energy that can be transferred from one substance to another. It is the portion of potential energy that can be transferred from one substance to another.
Answer:
It is the portion of internal energy that can be transferred from one substance to another.
Thermal energy is the portion of internal energy that can be transferred from one substance to another.
What is thermal energy?Thermal energy is the energy an object posses which is as a result of particles movement within it.
It is also the internal energy system in a state of thermodynamic equilibrium which is as a result of its temperature. Thermal energy cannot be concert to useful work easily.
Therefore, thermal energy is the portion of internal energy that can be transferred from one substance to another.
Learn more about thermal energy from the link below.
https://brainly.com/question/19666326
Hot coffee in a mug cools over time and the mug warms up. Which describes the energy in this system? The average kinetic energy of the particles in the mug decreases. The average kinetic energy of the particles in the coffee increases. Thermal energy from the mug is transferred to the coffee. Thermal energy from the coffee is transferred to the mug.
Answer:
d
Explanation:
Answer:
D
Explanation:
Edge 2021
Compare the conjugate bases of these three acids. Acid 1: hypochlorous acid , HClO Acid 2: phosphoric acid , H3PO4 Acid 3: hydrogen sulfide , HS- What is the formula for the weakest conjugate base ?
Answer:
The weakest conjugate is HClO-.
Explanation:
As a general rule, the stronger the Bronsted-Lowry acid, the weaker its conjugate base, and vice versa.
Acid 1: HClO is a strong acid, hence its conjugate base would be weak
Acid 2: H3PO4 is a weak acid, hence its conjugate base would be strong
Acid 3: hydrogen sulphide is also a moderately weak acid with a moderately strong conjugate base.
In order of increasing strengths:
HClO < H2S < H3PO4
There are __________ moles of N atoms present in a 2.0 g C8H10O2N4.
Answer:
[tex]n_N=0.041molN[/tex]
Explanation:
Hello,
In this case, for this mole-mass relationship, we are able to compute the moles of nitrogen atoms by firstly obtaining the moles of the given compound, considering its molar mass that is 194 g/mol:
[tex]n_{C_8H_{10}O_2N_4}=2.0gC_8H_{10}O_2N_4*\frac{1molC_8H_{10}O_2N_4}{194gC_8H_{10}O_2N_4} =0.01molC_8H_{10}O_2N_4[/tex]
Then, by knowing that one mole of the given compound has four moles of nitrogen atoms, we apply the following relationship:
[tex]n_N=0.01molC_8H_{10}O_2N_4*\frac{4molN}{1molC_8H_{10}O_2N_4} \\\\n_N=0.041molN[/tex]
Best regards.
Which process is used to make lime (calcium oxide) from limestone (calcium carbonate)?
Answer:
Explanation:
Calcium oxide is fromed by the decomopostion of CaCO3 at high temperature.
CaCO3 ------> CaO +CO2
Hope this helps you
Rubidium is ______ potassium in the periodic table. lodine is ______ bromine in the periodic table. Therefore, the rubidium ion is __________ than the potassium ion, and the iodine ion is___________ than the bromide ion. The _______ the distance between the rubidium ion and the iodide ion is the potassium ion and the bromide ion. Therefore, the energy associated with the interaction between rubidium and iodide is________ atomic radius means that than that between , and the lattice energy of potassium bromide is ________ more exothermidc.
Answer:
The given blanks can be filled with below, below, larger, larger, larger, larger and smaller.
Explanation:
In the periodic table, rubidium comes below the potassium, and iodine comes below bromine. Therefore, it can be said that the ion of rubidium is larger in comparison to potassium ion, and similarly the ion of iodine is larger in comparison to the ion of bromine.
When the atomic radius is larger it signifies that the distance in between the ion of iodine and the ion of rubidium is larger in comparison to that between the ion of potassium and the ion of bromine. Thus, smaller energy is associated with the interaction between iodine and rubidium, and potassium bromide's lattice energy is more exothermic.
Take a series of observations to determine if process is spontaneous. Based upon those observations, you will create an activity series, listing the metals in order of their reactivity. Second, you will construct a series of virtual galvanic cells and use those to power a stopwatch. Third, you will determine the standard reduction potential of an unknown metal; comparing its reduction potential to a standard list, you will identify the unknown. Finally, you will create a situation in which the cells are not in the standard condition and measure the cell potential; using the Nernst equation, you will determine the concentration of an unknown solution
Answer the below questions for the portion of the activity in which Sn(s) is placed in AgNO3(aq)
1. Is there a reaction? (circle the correct response) Yes / No
2. How many electrons are transferred 4 electrons
3. Write the balanced redox reaction for the combination of AgNO3(aq) and Sn(s)Sn(s) + Ag+(aq) Sn2+(aq) + Ag(s)
Answer:
Explanation:
2AgNO₃ + Sn ⇄ Sn( NO₃)₂ + 2Ag
Ag⁺/Ag = .80 V
Sn⁺²/Sn = - .14 V
Hence Ag will be reduced and Sn will be oxidised . Hence the reaction will take place . YES .
2 ) 2 electrons are transferred .
3 )
2Ag⁺ + 2e = 2Ag
Sn = Sn⁺² + 2e
---------------------------
2Ag⁺ + Sn = Sn⁺² + 2Ag .
Which table represents a relation that is not function?
Please
Answer:
1
Explanation:
Any relation with a repeated input value is not a function.
Table 1 has the input value 2 listed twice, so does not represent a function.
What is the conjugate acid in the following equation hbr + H2O yields h30 positive + BR negative
Answer:
HBr + H2O = H3O+ + Br-
So our conjugate acid is the H3O+ to H2O
Explanation:
A conjugate acid of a base results when the base accepts a proton.
Consider ammonia reacting with water to form an equilibrium with ammonium ions and hydroxide ions:
NH3 (aq) + H2O (l) ⇌ NH4+ (aq) + OH- (aq)
Ammonium, NH4+, acts as a conjugate acid to ammonia, NH3.
When 1.550 gg of liquid hexane (C6H14)(C6H14) undergoes combustion in a bomb calorimeter, the temperature rises from 25.87 ∘C∘C to 38.13 ∘C∘C. Find ΔErxnΔErxn for the reaction in kJ/molkJ/mol hexane. The heat capacity of the bomb calorimeter, determined in a separate experiment, is 5.73 kJ/∘CkJ/∘C.
Answer:
ΔErxn[tex]= -3.90*10^3KJ[/tex]
Explanation:
Given from the question
T1 = 25.87∘C
T2= 38.13∘C.
C= 5.73Kj/C
CHECK THE ATTACHMENT FOR DETAILED EXPLATION
The mass of an object with 500 J of kinetic energy moving with a velocity of 5 m/s is kg.
Answer:
[tex]m=20kg[/tex]
Explanation:
Hello,
In this case, we define the kinnetic energy as:
[tex]K=\frac{1}{2} m*v^2[/tex]
Thus, for finding the mass we simply solve for it on the previous equation given the kinetic energy and the velocity:
[tex]m=\frac{2*K}{v^2}=\frac{500kg*\frac{m^2}{s^2} }{(5\frac{m}{s})^2} =\frac{500kg*\frac{m^2}{s^2} }{25\frac{m^2}{s^2}}\\\\m=20kg[/tex]
Best regards.
Answer:
The answer is 40 kg
Explanation:
You will this formula below:
m=[tex]\frac{2*\\KE}{v^{2} }[/tex]
Now we know our formula, now we plug in the given numbers:
m=[tex]\frac{2(500J)}{(5m/s)^2}[/tex]
Simplify and we get:
m=40 kg
I hope this was helpful.
A student mixed 20.00 grams of calcium nitrate, 10.00 grams of sodium nitrate, and 50.00 grams of aluminum nitrate in a 5.00 Litre volumetric flask. What is the molarity (M) of the resulting solution relative to the nitrate ion, NO3 1-
Answer:
[tex]M=0.213M[/tex]
Explanation:
Hello,
In this case, for each nitrate-based salt, we compute the nitrate moles as shown below:
[tex]n_{NO_3^-}=20.00gCa(NO_3)_2*\frac{1molCa(NO_3)_2}{164.088 gCa(NO_3)_2} *\frac{2molNO_3^-}{1molCa(NO_3)_2} =0.244molNO_3^-[/tex]
[tex]n_{NO_3^-}=10.00gNaNO_3*\frac{1molNaNO_3}{84.9947 gNaNO_3} *\frac{1molNO_3^-}{1molNaNO_3} =0.118molNO_3^-[/tex]
[tex]n_{NO_3^-}=50.00gAl(NO_3)_3*\frac{1molAl(NO_3)_3}{212.996gAl(NO_3)_3} *\frac{3molNO_3^-}{1molAl(NO_3)_3} =0.704molNO_3^-[/tex]
We notice calcium nitrate has two moles of nitrate ion, sodium nitrate has one and aluminium nitrate has three. Hence we add the moles to obtain the total moles nitrate ion:
[tex]n_{NO_3^-}^{Tot}=0.244+0.118+0.704=1.066molNO_3^-[/tex]
Finally, we compute the molarity:
[tex]M=\frac{1.066molNO_3^-}{5.00L} \\\\M=0.213M[/tex]
Regards.
Ba(OH)2:_______.
A. 1 barium atom, 1 oxygen atom and 1 hydrogen atom.
B. 1 barium atom, 1 oxygen atom and 2 hydrogen atoms.
C. 1 barium atom, 2 oxygen atoms and 2 hydrogen atoms.
D. 1 barium atom, 2 oxygen atoms and 1 hydrogen atom.
Answer: D
Explanation: Expand this (OH)2 you will get 2O, 2H
Hence 1Ba, 2O, 2H
Answer:
B. 1 barium atom, 1 oxygen atom and 2 hydrogen atoms.
Write a Lewis structure for each atom or ion. Draw the particle by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons and non-bonding electrons. Show the charge of the atom. Particles: S2-, Mg, Mg+2, P.
Answer:
The Lewis structure to this question can be described as follows:
Explanation:
Structure of Lewis for [tex]S^{2-}[/tex]:
The maximum number of electrons from valence in [tex]S^{2-}[/tex] is 8 (6 from S as well as 2 from negative change).
The valence electrons in the Lewis structure are placed on four sides of the atom.
Thus the structure of Lewis for [tex]S^{2-}[/tex] is as follows:
[tex]\left[\begin{array}{ccc} &. .&\\: &S&:\\&. .&\end{array}\right] ^{2-}[/tex]
Lewis Mg Structure:
Complete valence electrons are 2 in Mg.
The Lewis structure for Mg, therefore, is as follows:
[tex]\ . \\ Mg\\ \ .[/tex]
The Lewis structure for [tex]Mg^{2+}[/tex]
The maximum valence of electrons [tex]Mg^{2+}[/tex] in is= 0.
Thus, the structure for [tex]Mg^{2+}[/tex] is as follows:
[tex]Mg^{2+}[/tex]
Lewis structure for P :
The maximum number of valence electrons in P is = 5.
Thus, the structure for P is=
[tex]\ \ \ . \\ : P \ : \\[/tex]
The osmotic pressure exerted by a solution is equal to the molarity multiplied by the absolute temperature and the gas constant . Suppose the osmotic pressure of a certain solution is measured to be at an absolute temperature o of 312. K. Write an equation that will let you calculate the molarity c of this solution.
Answer:
Explanation:
From the question, osmotic pressure exerted by a solution is equal to the MOLARITY multiplied by the absolute TEMPERATURE and the GAS CONSTANT r.
Let P = osmotic pressure,
C = molarity, then
T = absolute temperature
r=gas constant
The Osmotic pressure Equation exerted by a solution [tex]P=C*T*r[/tex]
[tex]P=CTr[/tex]
Then it was required in the question to write an equation that will let you calculate the molarity c of this solution, and this equation should contain ONLY symbols
C= molarity of the solution
P=osmotic pressure
r = gas constant
T= absolute temperature
[tex]C=P/(rT)[/tex]
The equation that will let us calculate the molarity c of this solution = [tex]C=P/(rT)[/tex]
When an unsymmetrical alkene such as propene is treated with N-bromosuccinimide in aqueous dimethyl sulfoxide, the major product has the bromine atom bonded to the less highly substituted carbon atom. Is this Markovnikov or non-Markovnikov orientation
When an unsymmetrical alkene such as propene is treated with N-bromosuccinimide in aqueous dimethyl sulfoxide, the major product has the bromine atom bonded to the less highly substituted carbon atom. This reaction describes a non-Markovnikov orientation.
In the reaction between an unsymmetrical alkene (such as propene) and N-bromosuccinimide (NBS) in the presence of aqueous dimethyl sulfoxide (DMSO), the major product is formed with the bromine atom bonded to the less highly substituted carbon atom of the alkene.
In Markovnikov's addition, the major product is formed by adding the electrophile (in this case, the bromine atom) to the carbon atom with more hydrogen atoms bonded to it. However, the given reaction exhibits non-Markovnikov selectivity, as the bromine atom adds to the less substituted carbon atom.
This non-Markovnikov selectivity can be attributed to the presence of DMSO, which acts as a polar solvent and helps generate a bromine radical (Br•). The radical intermediate can then undergo reaction with the alkene, leading to the observed regioselectivity where the bromine atom adds to the less substituted carbon. This process is known as a radical addition reaction.
Hence, the reaction demonstrates a non-Markovnikov orientation due to the addition of the bromine atom to the less highly substituted carbon atom of the propene molecule.
Learn more about the Markovnikov rule here:
https://brainly.com/question/33423745
#SPJ 2
Calculate the standard entropy of reaction at 298 K for the reaction Hg(liq) + Cl2(g) → HgCl2(s) The standard molar entropies of the species at that temperature are: Sºm (Hg,liq) = 76.02 J / (K mol) ; Sºm (Cl2,g) = 223.07 J / (K mol) ; Sºm (HgCl2,s) = 146.0 J / (K mol)
Answer:
−153.1 J / (K mol)
Explanation:
Calculate the standard entropy of reaction at 298 K for the reaction Hg(liq) + Cl2(g) → HgCl2(s) The standard molar entropies of the species at that temperature are: Sºm (Hg,liq) = 76.02 J / (K mol) ; Sºm (Cl2,g) = 223.07 J / (K mol) ; Sºm (HgCl2,s) = 146.0 J / (K mol)
Hg(liq) + Cl2(g) → HgCl2(s)
Given that;
The standard molar entropies of the species at that temperature are:
Sºm (Hg,liq) = 76.02 J / (K mol) ;
Sºm (Cl2,g) = 223.07 J / (K mol) ;
Sºm (HgCl2,s) = 146.0 J / (K mol)
The standard molar entropies of reaction = Sºm[products] - Sºm [ reactants]
= 146.0 J / (K mol) – [76.02 J / (K mol) +223.07 J / (K mol) ]
= -153.09 J / (K mol)
= or -153.1 J / (K mol)
Hence the answer is −153.1 J / (K mol)
If 25.8 mL of an AgNO3 solution is needed to precipitate all Cl- ions in a 1570 mg of KCl (forming AgCl), what is the molarity of the AgNO3nsolution?
Answer:
M=0.816M
Explanation:
Hello,
In this case, we should consider the following reaction:
[tex]AgNO_3+KCl\rightarrow KNO_3+AgCl[/tex]
Thus, by knowing the 1:1 molar ratio of silver nitrate and potassium chloride, we can easily compute the moles of silver nitrate precipitating the 1570 mg of potassium chloride considering its molar mass of 74.5513 g/mol:
[tex]n_{AgNO_3}=1570mgKCl*\frac{1gKCl}{1000mgKCl} *\frac{1molKCl}{74.5513gKCl}*\frac{1molAgNO_3}{1molKCl} \\\\n_{AgNO_3}=0.021molAgNO_3[/tex]
Then, by using the volume of silver nitrate in liters (0.0258 L), we can directly compute the molarity:
[tex]M=\frac{0.021molAgNO_3}{0.0258L}\\ \\M=0.816M[/tex]
Regards.