A(n)___ is the smallest neutral unit of two or more atoms held together by a covalent bond? ​

The partial pressure of Gas B : 1.3 atm

Dalton's Law stated

the total pressure of a mixture of gases is equal to the sum of the partial pressures of the component gases  

Can be formulated:  

[tex]\tt P~tot=P1+P2+P3...Pn[/tex]

P tot = 2 atm

P gas A = 0.7 atm

So P gas B :

[tex]\tt P~gas~B=P~tot-P~gas~A\\\\P~gas~B=2-0.7=1.3~atm[/tex]

The partial pressure of Gas B in the mixture of two gases has been 1.3 atm.

The partial pressure of the gas can be defined as the pressure of the particular gas in the mixture of gases.

According to dalton, the total pressure of the gas has been the sum of the partial pressure of the individual gases.

Thus, total pressure = partial pressure of gas A + partial pressure of gas B

Given, total pressure = 2 atm

The partial pressure of gas A = 0.70 atm

So, the partial pressure of Gas B = total pressure - partial pressure of gas A

The partial pressure of Gas B = 2.0 atm - 0.70 atm

The partial pressure of Gas B = 1.3 atm

Thus, the partial pressure of Gas B in the mixture of two gases has been 1.3 atm.

For more information about the partial pressure, refer to the link:

https://brainly.com/question/8408970

Answer:

a. 0.047 M

b. 0.6778 moles

c. 6.76 g/mol

Explanation:

The formula for osmotic pressure is:

Where:

a.) So we solve for M:

b.) We calculate the moles of solute, using the volume and molar concentration:

c.) We calculate the molar mass, using the mass and the number of moles:

A. The molar concentration of the solution is 0.047 M

B. The mole of the solute in the solution is 0.034 mole

C. The molar mass of the solute is 134.7 g/mol

A. Determination of the molar concentration of the solution.

Osmotic pressure (π) = 875 torr = 875 / 760 = 1.15 atm

Temperature (T) = 25 °C = 25 + 273 = 298 K

Van't Hoff's factor (i) = 1 (non-electrolyte)

Gas constant (R) = 0.0821 atm.L/Kmol

π = iMRT

1.15 = 1 × M × 0.0821 × 298

1.15 = M × 24.4658

Divide both side by 24.4658

M = 1.15 / 24.4658

B. Determination of the mole of the solute.

Molarity = 0.047 M

Volume = 725 mL = 725 / 1000 = 0.725 L

Mole = Molarity x Volume

Mole of solute = 0.047 × 0.725

C. Determination of the molar mass of the solute

Mole of solute = 0.034 mole

Mass of solute = 4.58 g

Molar mass = mass / mole

Molar mass of solute = 4.58 / 0.034

Learn more on Osmotic pressure: https://brainly.com/question/5925156

Answer:

Explanation:

we shall use gas law formula to solve the problem .

P = .01 atm

V = 1.111 L

T = 273 K

mass of gas = .0218

molar mass = M

no of moles n = .0218 / M

PV = n RT

.01 x 1.111 = (.0218 / M)  x .082 x 273

.0218 / M = .000496

M = .0218 / .000496

= 43.95

Answer:

Answer:

a plant cell

Explanation:

because the chrolopast is green

Explanation:

Answer:

0.805 M.

Explanation:

Hello!

In this case, since the molarity of a solution is computing by dividing the moles of solute over the volume of solution in liters (M=n/V), for 15.0 g of potassium chloride (74.55 g/mol) we compute the corresponding moles:

[tex]n=15.0gKCl*\frac{1molKCl}{74.55gKCl}=0.201molKCl[/tex]

Next, since the volume is 0.2500 in liters, the molarity turns out:

[tex]M=\frac{0.201mol}{0.2500L} \\\\M=0.805M[/tex]

Best regards!

Answer:

Explanation:

mass of the solution m = 1.6 + 75 = 76.6 g

fall in temperature = 25 - 23.34 = 1.66°C

heat absorbed = mass x specific heat x fall in temperature

= 76.6 x 1.66 x 4.18

= 531.5 J .

= .5315 kJ .

mol weight of ammonium nitrate = 80 g

heat absorbed by 1.6 g = .5315 kJ

heat absorbed by 80 g or one mole = 26.575 kJ

enthalpy change ΔH = +26.575 kJ

b )

enthalpy of hydration = 2630 kJ / mol

lattice energy = enthalpy of hydration + enthalpy change

= 2630 + 26.575

= 2656.575 kJ  .

Answer:

A.) because they have delocalized electrons

Explanation:

This is right on edg. 2020

Answer:

Bruzaaubrey is 100% correct

Explanation:

Make sure to mark bruzaaubrey brainliest :)

Answer:

[tex]55.2gH_2O[/tex]

Explanation:

Hello!

In this case, since the reaction between hydrogen and oxygen to produce water is:

[tex]2H_2+O_2\rightarrow 2H_2O[/tex]

When equal masses of each reactant go in contact to carry out the reaction, we can identify the maximum mass of yielded water as the fewest mass yielded by each reactant, just as shown below:

[tex]m_{water}^{by\ H_2}=49.0gH_2*\frac{1molH_2}{2.02gH_2}*\frac{2molH_2O}{2molH_2}*\frac{18.02gH_2O}{1molH_2O} =170gH_2O\\\\m_{water}^{by\ O_2}=49.0gO_2*\frac{1molO_2}{32.0gO_2}*\frac{2molH_2O}{1molO_2}*\frac{18.02gH_2O}{1molH_2O} =55.2gH_2O[/tex]

Thus, since hydrogen yields more water than real, we limit the maximum mass of water to those 55.2 g yielded by oxygen as hydrogen would be in excess.

Best regards!

Answer:

Its B

Explanation:

Answer:

- 278.85 J  

Explanation:

Given that:

Pressure = 1.1 atm

The initial volume V₁ = 0.0 L

The final volume V₂ = 2.5 L

The work that takes place in a reaction at constant pressure can be expressed by using the equation:

W = P(V₂ - V₁ )

Since the volume of the gas is expanded from 0 to 2.5 L when 1.1 atm pressure is applied. Then, the work can be given by the expression:

W = - P(V₂ - V₁ )

W = -1.1 atm ( 2.5 - 0.0) L

W = -1.1 atm (2.5 L)

W = -2.75 atm L

Recall that:

1 atm L = 101.4 J

Therefore;

-2.75 atm L = ( -2.75 × 101.4 )J

= -278.85 J  

Thus, the work required at the chemical reaction when the pressure applied is 1.1 atm  = - 278.85 J  

Answer:energy

Explanation:needed points sorry

Answer:

0.16 L

Explanation:

From the question given above, the following data were obtained:

Mole = 0.0806 mole

Molarity = 0.490 M

Volume =?

Molarity is simply defined as the mole of solute per unit litre of the solution. Mathematically, it is expressed as:

Molarity = mole /Volume

With the above formula, we can obtain the volume of the solution as illustrated below:

Mole = 0.0806 mole

Molarity = 0.490 M

Volume =?

Molarity = mole /Volume

0.490 = 0.0806/volume

Cross multiply

0.490 × volume = 0.0806

Divide both side by 0.490

Volume = 0.0806 / 0.490

Volume of solution = 0.16 L

Thus, the volume of the solution is 0.16 L.

A solution is a mixture of solute in the solvent. The volume of the solution is 0.16 L.

A solution is a mixture of solute in the solvent.

An example of a solution is a mixture of salt in water.

Given,

Moles = 0.0806 mol [tex]\rm CaCl_2[/tex]

Molarity = 0.490 M

To find: the volume of the solution

[tex]Molarity = \dfrac{n}{V}[/tex]

Putting the values

[tex]0.490 M = \dfrac{ 0.0806}{V}\\\\0.490 M \times V = 0.0806\\\\Divide\; both\;side\; with\; 0.490\\\\V= \dfrac{ 0.0806}{0.490}=0.16 L[/tex]

Thus, the volume so the solution is 0.16 l.

Learn more about the solution, here:

https://brainly.com/question/7932885

Answer:

The answer is letter A.

A. A magnetic field occurs near a wire that has no current.

Because magnetic field occur near a current carrying wire.

Answer:

Check explanation section.

Explanation:

In order to be able to answer this question accurately,there is need to follow the formula below for the calculation;

Numbers of decades = total volume/ volume per decade. ----------------------(1).

So, we are given from the Question above that the volume of water in Lake Michigan = 13 billion gallons of water.

And if chicago uses 5 million gallons of water every decade.

Therefore, using the formula (1) above, we have;

Numbers of decades = 13 × 10^9/ 5 × 10^6 = 2.6 × 10^15 decades.

Answer:

D. Hurricanes form as a result of rising warm air and circulating winds​

Explanation:

Answer:

Point F

Explanation:

Point F is the maximum potential energy.

Point G is lots of kinetic energy.

Point H is low potenital energy and low kinetic energy.

Answer:

Intermolecular forces in liquid are

Intermolecular forces are electrostatic in nature and include van der Waals forces and hydrogen bonds. Molecules in liquids are held to other molecules by intermolecular interactions, which are weaker than the intramolecular interactions that hold the atoms together within molecules and polyatomic ions.

Answer:

it is found in the halogen ,the no le gases and in other non polar molecules such as co2 and methane. Landon dispersion force are part of the Vander waals force or weak intermolecular attraction

Answer:

Explanation:

Hello!

In this case, since the undergoing chemical reaction is:

[tex]2NO+O_2\rightleftharpoons 2NO_2[/tex]

The equilibrium expression in terms of pressures is:

[tex]Kp=\frac{p_{NO_2}^2}{p_{NO}^2p_{O_2}}[/tex]

Thus, for the initial conditions, we compute the initial pressures of both nitric oxide and oxygen:

[tex]p_{NO}^{0}=\frac{12.0g*0.082\frac{atm*L}{mol*K}*298.15K}{30g/mol*10.0L}=0.978atm\\\\ p_{O_2}^{0}=\frac{12.0g*0.082\frac{atm*L}{mol*K}*298.15K}{32g/mol*10.0L}=0.917atm[/tex]

Next, since the equilibrium pressure is 1148 mmHg or 1.51 atm, we can write:

[tex]p_T=p_{NO_2}+p_{NO}+p_{O_2}\\\\1.51=2x+0.978-2x+0.917-x\\\\1.51=1.90-x\\\\x=0.39atm[/tex]

Thus, the Kp turns out:

[tex]Kp=\frac{(2*0.39)^2}{(0.978-2*0.39)^2(0.917-x)} \\\\Kp=29.4[/tex]

Best regards!

Answer:

If an object has a higher density than the fluid it is in (fluid can mean liquid or gas), it will sink. If it has a lower density, it will float. Density is determined by an object's mass and volume. If two objects take up the same volume, but have one has more mass, then it also has a higher density.

Explanation:

Answer:

[tex]200\frac{kcal}{g}[/tex]

Explanation:

Hello!

In this case, for this calorimetry problem, since the combustion 0.0500 mol of the nutrient increase the temperature of water by 5.70 °C, we can notice that the heat lost by the nutrient is gained by water in order to write:

[tex]Q_{nutrient}=-Q_{water}[/tex]

Which can be also written as:

[tex]Q_{nutrient}=-m_{water}C_{water}\Delta T_{water}\\\\Q_{nutrient}=-200 g*4.184\frac{J}{g\°C}*5.70\°C\\\\Q_{nutrient}=4769.8 J[/tex]

Thus, in terms of the grams of the nutrient:

[tex]m_{nutrient}=0.0500mol*\frac{114g}{1mol}=5.70g[/tex]

The fuel value in nutritional Cal (kcal/g) turns out:

[tex]Fuel \ Value=\frac{-4.7698kJ}{5.70g}*\frac{1kcal}{4.184kJ}=200\frac{kcal}{g}[/tex]

Best regards!

Answer:

Explain some of the uses of metals based on their properties.

Explanation:

Metals have a shiny or metallic luster and are good conductors of heat and electricity, they can be bent and pounded in various shapes, so they can be used on cars, coins, some pipes, keys, and and a flag.

Answer:

1) 1.4 × 10³ mL

2) 0.913 kg

3) 1.1 g

Explanation:

1)

Step 1: Calculate the volume of 1.3 kg of olive oil

The density of olive oil is 0.917 kg/L.

1.3 kg × (1 L/0.917 kg) = 1.4 L

Step 2: Convert the volume to mL

We will use the relationship 1 L = 10³ mL.

1.4 L × (10³ mL/1 L) = 1.4 × 10³ mL

2)

Step 1: Calculate the mass of the cannon ball

The density of iron is 7.87 g/cm³.

116 cm³ × 7.87 g/cm³ = 913 g

Step 2: Convert the mass to kg

We will use the relationship 1 kg = 10³ g.

913 g × (1 kg / 10³ g) = 0.913 kg

3)

Step 1: Calculate the mass of the helium in the balloon

The density of balloon is 0.18 g/L.

6.1 L × 0.18 g/L = 1.1 g

Answer:

D. Brain

~PumpkinSpice1

Answer:

It emits 1.64 x 10⁻¹⁸J of energy

Explanation:

The n = 1 is a lower quantum level compared to n = 2.

When a hydrogen atom moves from a higher level to a lower one, it simply emits the energy difference between the two levels.

Answer:

Explanation:

The stereochemical structures of the two compounds of the fumarase-catalyzed reaction are in the attachment below. The reaction been referred to is illustrated in the equation below

HOOCCH=CHCOOH + H₂O ==> HOOCCH₂CH(OH)COOH

The compounds attached are trans-2-butenedioate (which is one of the reactants) and (s)-2-hydroxysuccinate (which is the product formed)

Note that stereoisomers are isomers that differ in spatial orientation, thus there are other isomers that could contain the same atoms and have slightly but different spatial orientation such as cis-2-butenedioate and (r)-2-hydroxysuccinate

Hi!

When the ocean reaches its saturation level of carbon dioxide, a couple of things will happen:

First, more carbon dioxide will remain in the atmosphere, and second, the ocean's pH will drop.

Carbonate and bicarbonate ions in seawater act as a buffer system which keeps the ocean's pH levels stable. When CO2 dissolves in seawater, it reacts with the ocean's buffer system in such a way that it produces two hydrogen ions, which lowers the pH. As more and more CO2 reacts with the ocean's buffer system and the system becomes saturated, less atmospheric carbon dioxide will cross over into the ocean. This excess CO2 will remain in the atmosphere and contribute to global climate change.

Hope this helped!

When the ocean reaches it's saturation level of carbon dioxide  more amount of carbon dioxide remains in the atmosphere and  pH of the ocean drops.

It is defined as the level or extent up-to which a substance is soluble in a particular solvent. Due to global warming ,there is an excessive release of carbon dioxide in atmosphere. The excessive amount cannot be soluble in the ocean water which leads to ocean acidification.

As a result of ocean acidification the pH of water in the ocean drops thus there is less amount of oxygen present for aquatic organisms which is needed to survive. When carbon dioxide dissolves in water it yields carbonic acid which further reduces the pH of water  and thus making it unfit for aquatic environment.

Learn more about saturation level,here:

https://brainly.com/question/13781023

#SPJ2

Answer:

slower

Explanation:

NBS is used in place of Br2 during bromination because the use of Br2 tends to result in the formation of a large concentration of the addition product.  This is because, the Br2 interacts with the double bond to yield only the dibromide (addition product).

The usefulness of NBS lies in the fact that it provides a lower concentration of Br2, and such that the rate addition is slower than the chain propagation steps. Only the monobromination product is observed

The low concentration of Br2 allows the free-radical reaction to out-compete the alkene addition reaction.

Answer:

3.228x10⁻⁴ moles of Na2S2O3 are required

Explanation:

In iodometry, the reaction of KIO3 with Na2S2O3 is:

KIO3 + 6 Na2S2O3 + 6H⁺ → KI + 3Na2S4O6 + 3H2O + 6Na⁺

Where 6 moles of Na2S2O3 reacts per moles of KIO3.

The moles of Na2S2O3 required to reach endpoint when 0.0000538 moles of KIO3 are:

0.0000538 moles of KIO3 * (6 moles Na2S2O3 / 1 mol KIO3) =