Answer:
59.1 mExplanation:
The height of the object can be found by using the formula
[tex]h = \frac{p}{mg } \\ [/tex]
where
p is the potential energy
m is the mass
h is the height
g is the acceleration due to gravity which is 10 m/s²
From the question we have
[tex]h = \frac{23048}{39 \times 10} = \frac{23048}{390} \\ = 59.0974...[/tex]
We have the final answer as
59.1 mHope this helps you
How would you define the period of a pendulum?
A.) time it takes the pendulum to make one full back-and-forth swing
B.) time it takes the pendulum to swing forward only
C.) time it takes the pendulum to swing back only
A. The period of a pendulum can b defined as the time it takes the pendulum to make one full back-and-forth swing.
What is period of a pendulum?The period of a pendulum is defined as the time taken by the pendulum to finish one full oscillation and is denoted by letter "T".
The period of oscillation of a pendulum is calculated as follows;
T = 2π√(L/g)
where;
L is the length of the pendulumg is acceleration due to gravity = 9.8 m/s²T is the period of the oscillation of the pendulumThe period of a pendulum does not depend on the mass of the ball, but only on the length of the string.
Thus, we can conclude that, the period of a pendulum can b defined as the time it takes the pendulum to make one full back-and-forth swing.
A full back ad forth swing makes one complete oscillation.
Learn more about period of a pendulum here: https://brainly.com/question/26524032
#SPJ1
How many dm in 14.5 mm?
Which of the following aqueous solutions has the highest boiling point?
A) 0.10 M lithium sulfate, Li2SO4
B) 0.10 M hydrochloric acid, HCI
C) 0.10 M lithium nitrate, LINO3
D) 0.10 M magnesium sulfate, MgSO4
The highest boiling point : A) 0.10 M lithium sulfate, Li₂SO4
Further explanationSolutions from volatile substances have a higher boiling point and lower freezing points than the solvent
ΔTb = Tb solution - Tb solvent
ΔTb = boiling point elevation
[tex] \large {\boxed {\boxed {\bold {\Delta Tb \: = \: Kb.m}}} [/tex]
Kb = molal boiling point increase
m = molal solution
For electrolyte solutions there is a van't Hoff factor = i
i = 1 + (n-1) α
n = number of ions from the electrolyte
α = degree of ionization, strong electrolyte α = 1, for non electrolytes i = 1
So ΔTb ≈ i(van't Hoff), the greater i, the greater ΔTb
α = 1 , strong electrolyte
A) 0.10 M lithium sulfate, Li₂SO4
Li₂SO4 ⇒2Li⁺+SO₄²⁻ ⇒n=3
B) 0.10 M hydrochloric acid, HCI
HCl⇒H⁺+Cl⁻⇒n=2
C) 0.10 M lithium nitrate, LINO₃
LINO₃ ⇒ Li⁺+NO₃⁻ ⇒n=2
D) 0.10 M magnesium sulfate, MgSO4
MgSO4 ⇒ Mg²⁺ + SO₄²⁻ ⇒ n=2
how many moles are there in 1578 grams of Ba3(C6H6O7)2
Answer:
Explanation:
The essential though process is to ask oneself when converting grams to moles=> 'How many formula weights are in the given mass?' This directs one to divide the substance's formula weight into the given mass (in grams) on order to determine number of moles. That is ...
moles = Given Mass of Substance in grams / formula weight of substance in grams
= 1578 grams / 791 grams-mol.⁻¹ =1.995 mole ≅ 2 moles
What is the acceleration of a 50kg object pushed with a force of 500 Newton’s
Answer:
10 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass
From the question we have
[tex]a = \frac{500}{50} = \frac{50}{5} = 10 \\ [/tex]
We have the final answer as
10 m/s²Hope this helps you
How many oxygen atoms are contained in 4.39 grams of Al2(SO4)3?
The average distance between two molecules is 6.55 x 10 19 pm. What is this distance in nanometers? Report your number in scientific notation and with the correct number of significant figures. For example 1000 would be reported as 1.00e+3 and 0.001 would be 1.00e-3.
So there are two aluminum atoms, three sulfur atoms, and 12 oxygen atoms in a single unit of the compound Al2(SO4)3.
What is aluminum?Chemical element aluminum has the atomic number 13 and the letter Al assigned to it. The density of aluminum is around one third that of steel, which is less than that of most common metals. When exposed to air, it generates an oxidized layer that protects the surface because to its strong affinity for oxygen. With regard to color and light-reflecting properties, aluminum has a striking visual similarity to silver. It has a soft, ductile, and non-magnetic texture.
Aluminum is the twelfth most frequent element in the universe and has only one stable isotope, 27Al, which is also quite abundant. Radiodating employs the radioactivity of 26Al.
Chemically, aluminum belongs to the boron group and is a post-transition metal.
To learn more about aluminum from the given link:
https://brainly.com/question/11952150
#SPJ4
Which compound accepts electrons from NADH , producing a compound that can pass through the inner membrane?
1. oxaloacetate
2. aspartate
3. glutamate
4. a-ketoglutarate
Answer:
The correct answer is - 1. oxaloacetate.
Explanation:
During the electron transport chain, the oxaloacetate is converted to aspartate by the reduction of NADH and accepting electrons in the mitochondria. Aspartate is then moved through the inner membrane to the cytosol.
This is the reaction also known as the synthesis of the aspartate. Aspartate either again converted to OAA (oxaloacetate) or move to the biosynthesis of proteins and biosynthesis of purine and pyrimidines.
how many moles are in 47.5 g of Ca?
A.2.85 e 25
B.1.18 mol
C. 7.89 e-23
D.1900 mol
what element has 20 protons 25 neutrons and 20 electrons
Answer: calcium
Explanation: a periodic table can tell you how many protons have, and from this we can see that the answer is calcium
What is the energy of an X-ray with a frequency of 6.35 x 108 Hz?
Answer:
3x10 16hz 16 small above 10
Explanation:the frequency of any wave is (wave speed)/(wavelength)
The speed of light is 3x10 m/s. that's 30 million quartz
Which of Earth’s spheres contains rocks and sediments?
Answer:
Geosphere
Explanation:
Geosphere sometimes called as lithosphere starts from the surface of the earth and lies till crust. This part of the earth contains rocks and minerals.
This portion of the earth includes sediments,mountains and rock. The natural resources that is available to the human brings lies in geosphere.
On the Moon the gravity is approximately 1/6 of that on Earth. If an object has a mass of 120
grams on Earth, what is its weight on the Moon?
Answer:
Before I answer I feel that I should provide some scientific background as to how you would go about determining the answer.
First point that’s important for you to understand is the following formula
F = G∗(M1∗M2)/d2
Where G is your gravitational constant, which means that comparing the two weights it won’t change and we don’t really have to worry ourselves too much about it.
Secondly we have the masses of the two individual objects, M1 and M2, in this case M1 is going to be 120 pounds.
Then you have d which is the distance between the centres of the two objects.
The second thing you need to understand is the fine print in the question. You asked how much you would weigh given that you weigh 120 pounds on Earth. The question from a pure science view is flawed as you don’t infact weigh 120 pounds, rather you have a mass of 120 pounds which will remain a constant. Your weight on Earth is actually 530 Newtons
(120lb=54,4311kg)
(54,4311kg*9.8) = approximately 530N
Now assuming you are right and the moon has a sixth of the earths mass, that would mean that you would weigh a sixth of it.
But wait theres more, because the radius of the moon is smaller it will have an impact. the radius of the moon infact is a sixth of the earths, which means that you will be multiplying by 36(because you are making the divisor a sixth smaller, but also squaring it)
this would mean that you would weigh six times as much on the moon as on Earth, which we know is not true. This implies you made a mistake with the mass of the moon compared to that of the Earth. So upon googling it.
Mass of Earth
5.972 × 10^24 kg
Mass of Moon
7.34767309 × 10^22
kilograms
Just looking at it the difference is about 200 times, which means that you probably misinterpreted the data, the gravitational attraction of the moon is a sixth of the Earths, which means you would weigh about 530/6N or to the casual viewer about 88 N
Note : I rounded and abstracted a lot because I feel its the gist of the answer and the understanding that’s important, you are welcome to contact me if you feel anything is incomplete or unclear. I did most of the math quickly and am liable to mistakes but the science is right(unless ofc you feel like bringing relativity in, but that’s a whole other can of worms
Explanation:
Yess
Answer:
19.92 pounds :)
Using the square-bracket notation, express the concentration of ions in a solution that is 0.811 M in aluminum sulfate [Al2(SO4)3].
[Al^3+] = ____ M
[SO4^2−] = ____ M
Answer:
[Al³⁺] = 1.62 M
[SO₄²⁻] = 2.43 M
Explanation:
Step 1: Given data
Molar concentration of Al₂(SO₄)₃: 0.811 M
Step 2: Write the reaction for the ionization of Al₂(SO₄)₃
Al₂(SO₄)₃(aq) ⇒ 2 Al³⁺(aq) + 3 SO₄²⁻(aq)
Step 3: Calculate the molar concentration of Al³⁺
The molar ratio of Al₂(SO₄)₃ to Al³⁺ is 1:2. The molarity of Al³⁺ is 2/1 × 0.811 M = 1.62 M.
Step 4: Calculate the molar concentration of SO₄²⁻
The molar ratio of Al₂(SO₄)₃ to SO₄²⁻ is 1:3. The molarity of SO₄²⁻ is 3/1 × 0.811 M = 2.43 M
The concentration of the aluminium ion is 0.4055 M while the concentration of the sulfate ion is 0.270 M.
We know that the following reaction occurs for the dissolution of Al2(SO4)3 in water;
Al2(SO4)3(s) ----> 2Al^3+(aq) + 3SO4^2-(aq)
To find the concentration of each of the ions;
Concentration of Al^3+ = 1/2 × 0.811 M = 0.4055 MSo using the square bracket notation to indicate concentration;
[Al^3+] = 0.4055 M
Concentration of SO4^2- = 1/3 × 0.811 M = 0.270 MSo using the square bracket notation to indicate concentration;
[SO4^2−] =0.270 M
Learn more: https://brainly.com/question/9352088
!!!!!!!!!!!!!!!!!!!!
Select each correct answer. More than one answer may be correct. Four atoms of hydrogen combine with one carbon atom to form CH4, but only two hydrogen atoms combine with one oxygen atom to form H2O. Which of the following helps to explain why? Hydrogen has one valence electron. Metallic bonds form between positively charged metal ions and delocalized electrons. Atoms may share electrons in order to fill their electron shells. Oxygen has two vacancies in its electron shell, but carbon has four vacancies.
Can someone give me a title idea for the Science Investigatory Project?
Thx for your idea :)
please help. i’ve been gone for school for 1 week and half and i’m totally lost.
Define the following and give an example of each:_______.
(a) dispersion force
(b) dipole-dipole attraction
(c) hydrogen bond
London Dispersion force or Van de Waals force is a temporary attractive force which are the weakest and occur between nonpolar noble gases and same charges. This force is weaker because they have more electrons that are farther from the nucleus and are able to move around easier.
Example: [tex]N_2[/tex], [tex]F_2, \ I_2[/tex]
_____________________________________[tex]\huge\textbf{Dipole - Dipole Forces}[/tex]
Dipole force is present between the polar molecules. Polar molecules are those molecules which have slightly negative and slightly positive charge. Dipole-dipole forces are attractive forces between the positive end of one polar molecule and the negative end of another polar molecule.
Example: HCl, HF, [tex]CHCl_3[/tex]
_____________________________________[tex]\huge\textbf{Hydrogen Bonding}[/tex]
It is a special type of dipole force present between polar molecules, it is formed between Hydrogen atom which forms positive ion, and the other negative ion. It results from the attractive force between a hydrogen atom covalently bonded to a very electronegative atom such as a N, O, or F atom. The hydrogen bond is one of the strongest intermolecular attractions, but weaker than a covalent or an ionic bond.
Example: Every polar molecule which has hydrogen has hydrogen bonding i.e. [tex]H_2O, NH_3[/tex]
_____________________________________Best Regards,'Borz'A teacher makes the following statement.
“Gasoline boils at a relatively low temperature (about 150°C). The kerosene is removed at around 200°C, followed by diesel oil at 300°C and fuel oil at around 370°C.”
What topic is the teacher most likely talking about?
distillation of a mixture
filtration of a pure substance
evaporation of a mixture
sorting of a pure substance
Answer:
distillation of a mixture
Explanation:
Answer:
A.) Distillation of mixture.
Explanation:
edge 2021
How many particles are in 47.7 g of Magnesium? (Round the average
atomic mass to two numbers after the decimal)
Answer:
1.18 × 10²⁴ particles Mg
General Formulas and Concepts:
Chemistry - Atomic Structure
Reading a Periodic TableUsing Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:
Step 1: Define
47.7 g Mg
Step 2: Identify Conversions
Avogadro's Number
Molar Mass of Mg - 24.31 g/mol
Step 3: Convert
[tex]47.7 \ g \ Mg(\frac{1 \ mol \ Mg}{24.31 \ g \ Mg} )(\frac{6.022 \cdot 10^{23} \ particles \ Mg}{1 \ mol \ Mg} )[/tex] = 1.18161 × 10²⁴ particles Mg
Step 4: Check
We are given 3 sig figs. Follow sig fig rules and round.
1.18161 × 10²⁴ particles Mg ≈ 1.18 × 10²⁴ particles Mg
UV-B light is harmful to the human body and can cause irreparable cell damage. How much energy per photon is associated with UV-B rays with a wavelength of 305 nm?
The energy of the waves is 6.5 * 10^-19 J.
What is the energy?The energy of the wave could be obtained from the wavelength of the wave by by the use of the formula shown below;
E = hc/λ
h = Plank's constant
c = speed of light
λ = wavelength
Now we have;
h = 6.6 * 10^-34 Js
c = 3 * 10^8 m/s
λ = 305 * 10^-9
E = 6.6 * 10^-34 Js * 3 * 10^8 m/s/ 305 * 10^-9
E = 6.5 * 10^-19 J
Learn more about energy of UV rays:https://brainly.com/question/8611796
#SPJ1
What is the density of Iodine gas at 2.36 atm and 65.0 C?
The density : 21.63 g/L
Further explanationThe gas equation can be written
[tex]\large {\boxed {\bold {PV = nRT}}}[/tex]
where
P = pressure, atm
V = volume, liter
n = number of moles
R = gas constant = 0.08206 L.atm / mol K
T = temperature, Kelvin
T = 65+273=338 K
P=2.36 atm
MW Iodine gas (I₂)=254
The density :
[tex]\tt \rho=\dfrac{P\times MW}{RT}\\\\\rho=\dfrac{2.36\times 254}{0.082\times 338}=21.63~g/L[/tex]
Which statement best reflects a change in climate?
It's very windy today and will rain later.
Droughts in California have become more common over the past few decades.
There is a hurricane forming off the coast of Florida.
Tropical climates are likely to be wet and warm. sorry science wasnt a subject i could pick from.
Answer:
droughts in California have become more common in California
Explanation:
Climate is weather over time which means that the first and the third one are just isolated incidents and the last answer choice shows climate but it doesn't show a change in climate
Question 3
What is the pH of a solution with [H 30 +) = 1 x 10 -9 M?
1.0 x 10 -5
-9.0
5.0
-5.0
9.0
Answer:
[tex] \huge 9[/tex]
Explanation:
The pH of a solution can be found by using the formula
[tex]pH = - log [ { H_3O}^{+}][/tex]
From the question we have
[tex]pH = - log(1 \times {10}^{ - 9} ) [/tex]
We have the final answer as
9Hope this helps you
what makes up from zero to four percent of the atmosphere?
how is the mole of a used to express the mass of a substance explain
Answer:
See explanation
Explanation:
The mole refers to the amount of substance contained in 12 g of carbon-12. It was arbitrarily related to the number of elementary entities in 12 g of carbon -12 by Prof. Avogadro.
The number of moles of a substance is obtained as the mass of the substance divided by the mass of one mole of the substance (molar mass). Hence when the number of moles is known, the mass is now;
number of moles * molar mass
which of these does not have volume
a. air
b. a lake
c. energy
d. a sponge
Answer:
c
Explanation:
energy does not have volume
Answer:
C.energy.Explanation:
Please mark my answer as a brainliest. ❤❤❤❤What is neutralization ?
Answer:
"a chemical reaction in which acid and a base react quantitatively with each other"
Explanation:
barium chloride + sodium phosphate
Answer with double replacement
Answer:
Barium chloride + Sodium phosphate → barium phosphate + sodium chloride
Explanation:
Double replacement:
It is the reaction in which two compound exchange their ions and form new compounds.
AB + CD → AC +BD
Chemical equation:
BaCl₂ + Na₃PO₄ → Ba₃(PO₄)₂ + NaCl
Balanced chemical equation:
3BaCl₂ + 2Na₃PO₄ → Ba₃(PO₄)₂ + 6NaCl
The cation and anion of both reactants are exchanged with each other.
Ba²⁺ react with PO₄³⁻ and form Ba₃(PO₄)₂ while Cl⁻ react with Na⁺ and form sodium chloride.
Molecular equation:
Barium chloride + Sodium phosphate → barium phosphate + sodium chloride
Draw a structural formula of an alkene or alkenes (if more than one) that undergo acid-catalyzed hydration and without rearrangement give 1-methylcyclohexanol as the MAJOR product. Ignore stereochemistry. If your answer includes more than one alkene, just draw both structures. Do not separate the formulas with + or any other sign.
Answer:
See explanation and image attached
Explanation:
The acid-catalyzed hydration of alkenes is an ionic reaction. Being an ionic reaction, a carbocation is formed in the process. This carbocation is capable of rearrangement to yield different products based on thermodynamic stability.
Remember that the order of stability of carbocations is; methyl< primary<secondary< tertiary. The rearrangement of carbocations leads to the formation of more stable intermediates and consequently more stable products.
However, the alkene in the image shown yields 1-methylcyclohexanol without carbocation rearrangement.