Answer:
Kinetic
Explanation:
potential means it has the POTENTIAL to move, gravitational potential energy is when an object isn't moving but the it turns into gravitational kinetic energy since gravity causes it to move. since the object in question is already in motion it proves kinetic energy as the answer.
Classify the elements as diatomic or monatomic. If necessary, refer to the periodic table to help you identify the diatomic elements.
carbon
helium
hydrogen
iodine
oxygen
sodium
Answer:
carbon- monatomic
helium- monatomic
hydrogen- diatomic
iodine- diatomic
oxygen- diatomic
sodium- monatomic
Explanation:
the diatomic elements can be remembered with this sentence:
Have No Fear Of Ice Clear Brownies
have- hydrogen
no- nitrogen
fear- fluorine
of- oxygen
ice- iodine
clear- chlorine
brownies- bromine
The diatomic molecules are hydrogen ,iodine ,oxygen while the monoatomic molecules are carbon, helium and sodium.
What are elements?It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.
Learn more about elements, here:
https://brainly.com/question/1812430
#SPJ5
For addition and subtraction, round the result to
match the measurement with the fewest decimal
places. For example,
3.4 cm + 4.75 cm = 8.2 cm
because 3.4 cm is only measured to the nearest
0.1 centimeter.
Choose the answer with the correct number of
significant digits.
4.6 cm + 2.35 cm =
v cm
Answer:
7.0
Explanation:
second question is 4.90 third question is 3.0 fourth question is 6.6
Answer:
The first answer is 4.6 cm + 2.35 cm = 7.0 cm
The second answer is 8.45 cm – 3.55 cm = 4.90 cm
The third answer is 1.2 cm × 2.54 cm = 3.0 cm^2
Then the last answer is 6.6 cm^3 ÷ 1.00 cm^2 = 6.6 cm
I hope this helps, Its correct on edge 2020 :)
Which equation represents neutralization?
6Li(s) + N2(g) → 2Li3N(S)
2Mg(s) + O2(g) → 2MgO(S)
2KOH(aq) + H2SO4(aq) → K2SO4(aq) + 2H2O(l)
Pb(NO3)2(aq) + K2CrO4(aq) → 2KNO3(aq) PbCrO4(s)
Answer:
2KOH(aq) + H2SO4(aq) → K2SO4(aq) + 2H2O(l)
Explanation:
A neutralization reaction refers to any reaction between an acid and a base to form salt and water only. In a neutralization reaction, the key reaction that takes place to produce water is shown ionically below;
H^+(aq) +OH^-(aq) ----> H2O(l)
Looking at all the options provided, our gaze will have to settle on the reaction;
2KOH(aq) + H2SO4(aq) → K2SO4(aq) + 2H2O(l)
We can clearly see that there is an acid that reacts with a base to form a salt and water. The base contains the OH^- ion while the acid contains the hydrogen ion.
This is the only reaction of this sort among the options hence it is the correct answer.
I'll give brainliest
In going through the three physical states of matter, water would normally undergo changes in
A) composition.
B) density.
C) mass.
D) weight.
Answer:
COMPOSITION
Explanation:
Brainliest plz
The compound diborane can be used as a rocket propellant. What is the percent composition of boron in diborane (B2H6)? A. 22% B. 25% C. 39% D. 75% E. 78%
Answer: E. 78%
Explanation:
Diborane (B2H6), a chemical compound made up of approximately 78% Boron and 22% Hydrogen.
Answer:
E
Explanation:
#edmentumgang
When designing an engineering solution, certain criteria and constraints must be considered. Criteria are the features of the design that must be kept in mind while solving the problem. A criterion answers the question, What do you want the design to do? A constraint is something that prevents the design from performing at its best. These constraints can include time, resources, and money.
When designing the airbag, what are some criteria you might consider and what constraints would you anticipate in its implementation?
Create a list of at least two criteria and at least three constraints that you must consider in the design. Rank them in order of importance, with the most important ones at the top of the list.
Answer:
The criteria listed in order of importance are;
1) To be inflated in the event of a collision in order to protect the occupants of the front of the vehicle
2) To be able to withstand the load of the breaking force of the occupants in the front seat of the vehicle during a collision
3) To be relatively tough so as to resist being torn on impact with a sharp object
The constraints listed in order of importance are;
1) How is the model design able to sense a collision that requires the airbag to be inflated
2) The uncertainty of the load the airbag will withstand upon collision
3) The possible hazard that could be caused by the gas used to inflate the airbag
4) The usage/interaction tendency between the vehicle occupant and the airbag system
Explanation:
In order to produce an effective design, it is important to be able to foresee the possible deficiencies of an idea so as to be able to mitigate the problems before an actual incident happens.
The criteria that should be considered include:
To be inflated in the event of a collision.Ability to withstand the load of the braking force of the occupants.Durability.It should be noted that when designing an engineering solution, there are some criteria and constraints that must be considered in order to achieve the objective of the engineering solution.
Some of the criteria that should be considered include the fact that it should be inflated in the event of a collision, the ability to withstand the impact of the braking force of the occupants, durability, etc.
The constraints listed include how the model design is able to sense a collision that requires the airbag. The possible hazards that can be caused by the gas. Also, it's vital to consider the interaction tendency between the airbag and the occupants of the vehicle.
Read related link on:
https://brainly.com/question/14469689
2 The precipitate formed when sodium hydroxide reacts with solutions
containing metal ions is the corresponding METAL HYDROXIDE.
a Write word equations and symbol equations including state symbols)
to show how the following solutions react with sodium hydroxide:
magnesium sulfate, MgSO4
ii iron(II) sulfate, FeSO4
ili iron(III) chloride, FeCl3
iv copper(ll) chloride, CuCl2
Answer:
Explanation:
MgSO4 + 2NaOH -------> Mg(OH)2 + 2NaSO4
CuCl2 +2NaOH -------> Cu (OH)2 + 2Nacl
FeCl3 + 3NaOH ----> Fe(OH)3 + 3NaCl
based on this can you try for the FeSO4. similar to first reaction showed above
When balanced, which equation would have the coefficient 3 in front of any of the reactants? Zn + HCl ZnCl2 + H2 H2SO4 + B(OH)3 B2(SO4)3 + H2O Fe + AgNO3 Fe(NO3)2 + Ag C2H4O2 + O2 CO2 +H2O
Answer:
b
Explanation:
i got it right on edge
To balance a reaction means to make the number of atoms the same on both the reactants and products side. The steps for balancing is as follows:-
Balance the Metal firstThen balance the HydrogenBalance the oxygen at lastAccording to the question, there are third reactions. the reaction third has the 3 coefficient before the compound.
The balanced reaction is as follows:-
[tex]3H_2So_4 + 2B (OH)_3------->B_2(So_4)_3 + 6H_2O[/tex]
Hence the correct compound is[tex]3H_2SO_4[/tex].
For more information, refer to the link:-
https://brainly.com/question/12271256
HELP ME ILL GIVE YOU 40 POINTS JUST HELP MEEEEEEEEEEE
What causes blood pressure?
A.the strength of the muscles in the walls of the capillaries
B.the speed at which oxygen is returned to blood in the lungs
C. the force with which the ventricles contract
D. the rate at which blood flows through the heart
Answer:
C
Explanation:
What causes blood pressure?
C
To pump blood around the body, the heart contracts and then relaxes through the cardiac cycle. The cycle begins with the contraction of the two atria, which push blood into the ventricles. Then, the ventricles contract, which forces the blood out of the heart.
When the heart pushes blood around the body during systole, the pressure placed on the vessels increases. This is called systolic pressure.
When the heart relaxes between beats and refills with blood, the blood pressure drops. This is called diastolic pressure.
A molecule is what ?
Answer:
Explanation:
A group of atoms bonded together and the smallest particle in a chemical element or compound that has the chemical properties of that element or compound. They are made up of atoms that are held together by chemical bonds. These bonds exchange electrons among atoms.
A molecule is just a group of two or more atoms bunched together.
You want to test the effect of water temperature on the rate of sugar
dissolution. Which of the following is an example of a controlled experiment
to test this?
A. The temperatures of five beakers of 250 mL of water are kept
constant, and 10 g of sugar is added to each beaker.
B. The temperatures of five beakers of 250 mL of water are varied,
and 10 g of sugar is added to each beaker.
C. The temperatures of five beakers of 250 mL of water are varied,
and 10 g of sugar is added to each beaker while three of the
beakers are stirred.
D. The temperatures of five beakers of 250 mL of water are varied,
and different amounts of sugar are added to each beaker.
Answer:B
Explanation:
You want different temperatures for each beaker but everything else the same
Which molecule is butyne?
Answer:
The answer is B.
Explanation:
A P E X
What is the molarity of a NaCl solution with 3.7 moles and 2.3 L?*
Answer:
5.0 molatrity
Explanation:
because i just known
Answer:
Approximately 1.61
Explanation:
Molarity = Moles/Liters
Molariry = 3.7 moles NaCl / 2.3L
Molariry = 1.61
A 390 mL solutions of 4.6 M HCl is left out over the weekend and 74 mL of solvent evaporates. What is the new concentration of HCl?
Answer:
5.7 M
Explanation:
You have .390 L of 4.6 M HCl.
.390 L * 4.6 mol/L = 1.794 mol HCl
.390-.074=.316 L solvent remaining
1.794 mol/.316 L=5.7 M HCl
please help me!!!!!!!! if the temperature of your ice is 32 percent Fahrenheit and your water is 68 Fahrenheit and you mixed the ice and the water together what temperature is your water?
Answer:
36 degrees farenheit
Arrange the following rock particles which occur in soil in the decreasing order of their sizes:
Sand, Clay, Gravel, Silt.Immersive Reader
(1 Point)
Clay>Silt>Sand>Gravel
Silt>Clay>Sand>Gravel
Gravel >Sand>Silt>Clay
Answer:
Gravel >Sand>Silt>Clay
Explanation:
Sand, Clay, Gravel and Silt
Clay: all particles smaller than 0.002 mm
Silt: all particles within the size range of 0.002-0.05 mm;
Sand: all particles within the size range of (2.0 mm - 0.05 mm)
Gravel particles are larger than sand, ranging in size from 4.75 mm to 75 mm
Going through the options, the correct option is;
Gravel >Sand>Silt>Clay
Which statement best describes the process that the diagrams show?
A solid loses kinetic energy to become a liquid and then becomes a gas
A solid gains kinetic energy to become a liquid and then becomes a gas,
Agas loses kinetic energy to become a liquid and then becomes a solid
Agas gains kinetic energy to become a liquid and then becomes a solid
Answer:Agas loses kinetic energy to become a liquid and then becomes a solid
i believe i had this before but where is the graph
Explanation:
please mark this answer as brainlest
B. A solid gains kinetic energy to become a liquid and then becomes a gas
What are substances on the right side of a chemical equation
called?
a. reactants
b. groups
C. products
d. electrons
Answer:
The substances on the right side of a chemical equation are the products as reactions typically move from left to right.
A chemical equation is a representation of chemical reaction in the form of symbols and formulae where the reactants are on left side and the products on right side.
Eg. CaCO3(s)→CaO(s)+CO2(g
What is chemical equation?Chemical equation is written "with the reactants on the left side of an arrow and the products of the chemical reaction on the right".
What is a reactant?Reactants are "the starting materials in a chemical reaction".
What is a product?
A product is "a chemical species resulting from a chemical reaction".
Hence, the substances on the right side of a chemical equation are products.
To learn more about chemical equation here
https://brainly.com/question/16783663
#SPJ2
do rainforests have hot summers and cold winters?
Answer:
No, rainforests have long wet winters and short dry summers.
TRUE OR FALSE
As the human population increases, demand for natural resources will also increase.
Which of the following atoms has the largest atomic radius? Provide an explanation
a Hydrogen
b. Sodium
C Lithium
d Rubidium
Answer:
d Rubidium
Explanation:
The atomic radius of an atom is the distance from the center of the nucleus to its outermost electron.
The atomic radius of elements varies in the periodic table, it increases as you go down in a group and decreases along the period from left to right.
All the elements listed: Hydrogen, Sodium, Lithium and Rubidium belong to the same group in the periodic table (group 1), Since atomic radius increases from top to bottom in a group, Rubidium has the largest atomic radius.
The picture represents _________________.
A . Compounds
B . Mixture of Elements and Compounds
C. Mixture of Elements
D. Elements
E. Mixture of Compounds
If 11 moles of A are combined with 16 moles of B and the reaction occurs to the greatest extent possible, how many moles of C form?
When may a scientific theory be revised?
Answer:
it can be revised at any time.
Explanation:
Answer: Multiple answers to this question. This is what I comprehend.
Explanation:
Upon analysis of the results, a theory can be rejected or modified, but it can never be proven to be correct 100 percent of the time. For example, relativity has been tested many times, so it is generally accepted as true, but there could be an instance, which has not been encountered, where it is not true.
A student is trying to dissolve 20 grams of sugar in a beaker containing 250 milliliters of water at room temperature. What can the student do to make the sugar dissolve faster in the water?
Answer:
They can warm up the water. Sugar dissolves much faster in warm/hot water.
A perfect example of this is when you put sugar in your hot coffee/tea -> it will dissolve almost immediately. If you put sugar in cold water, you will have to stir it for quite some time before it dissolves.
Which is the best summary of the kinetic theory?
A. Potential energy is converted to kinetic energy.
O B. Atomic motion is constant at all temperatures.
C. Atoms and molecules are always in motion.
O D. Energy cannot be created or destroyed.
SUBMI
Answer:
C. Atoms and molecules are always in motion.
Using the phase diagram for H2O what phase is water in at 1 atm pressure and 50oC? A. It is in the solid phase B. It is at its melting point C. It is in the liquid phase D.It is in the gas phase
Answer:
C. It is in the liquid form.
Explanation:
1 atm is the normal pressure, so the question is really just what is H2O at 50C. The answer to that is liquid.
Also, I don't know why someone deleted my answer. My answer was correct and had a correct solution.
By examining the phase diagram of water it is clear that, at 1 atm pressure and 50 degree Celsius temperature, water exists at liquid state.
What is phase diagram?Phase diagram of a substance graphically represents the state of the substance at different temperature and pressures. Phase diagram helps to understand the point at which the three state of matter coexists and that point is called triple point.
Various physical properties can be determined using the phase diagram of a substance. Melting point, boiling point, freezing point etc. can be identified for the substance from its phase diagram.
Phase diagram of water represents the three states of water that are gas, liquid water and ice. Water freeze at 0°C and boils at 100 °C . at 1 atm pressure and 50 degree Celsius, water exists in liquid state.
To find more on phase diagram, refer here:
https://brainly.com/question/16945664
#SPJ2
hii:) how to do (c)?
Answer:
C
Explanation:
C shows a mixture of CO2 and H2O, 2 compounds
Answer:
C
Explanation:
C shows a mixture of CO2 and H2O, 2 compounds
A salt is made by adding an excess of an insoluble metal oxide to an acid.
How can the excess metal oxide be removed? *
D filtration
B crystallisation
A chromatography
C distillation
Answer:
Filtration
Explanation:
Filtration is used to separate solid substances from liquids or large molecules from small molecules. Since, Acid is a liquid and metal oxide is solid so Filtration can be used to separate these two.
Label the following ph paper color as either strong / weak acid, strong/weak base, or neutral
1. neutral
2.strong base
3.weak acid
4.strong acid
5.weak base