Answer:
(-4,-7)
Step-by-step explanation:
Adding 1 to the x and subtracting 3 from the y we get
-5+1= -4
And
-4-3= -7
What’s the correct answer for this question?
Answer:
B:
Step-by-step explanation:
If we rotate the 3-D figure around y-axis we'll obtain a cone with a radius of 3 units
A laptop producing company also produces laptop batteries, and claims that the batteries
it produces power a laptop for about 4:00 hours. But, you doubted the claim and collected
data from 500 laptop users of the same brand and battery, and you found out the battery
powers the laptop for about 3:00 hours and 30 minutes. Considering an alpha of 0.05,
prove the claim of the company is true or false or show whether you accept the
company’s claim or reject it? Please also write H0 and Ha statements for testing your
hypothesis
Answer:
There is enough evidence to support the claim that the batteries power the laptops for significantly less than 4 hours. (P-value = 0).
The null and alternative hypothesis are:
[tex]H_0: \mu=4\\\\H_a:\mu< 4[/tex]
Step-by-step explanation:
The question is incomplete: To test this claim a sample or population standard deviation is needed.
We will estimate that the sample standard deviation is 2 hours, and use a t-test to test that claim.
NOTE (after solving): The difference between the sample mean and the mean of the null hypothesis is big enough to reject the null hypothesis, even when we have a sample standard deviation of 3.5 hours, which can be considered bigger than the maximum standard deviation for the sample.
This is a hypothesis test for the population mean.
The claim is that the batteries power the laptops for significantly less than 4 hours.
Then, the null and alternative hypothesis are:
[tex]H_0: \mu=4\\\\H_a:\mu< 4[/tex]
The significance level is 0.05.
The sample has a size n=500.
The sample mean is M=3.5.
As the standard deviation of the population is not known, we estimate it with the sample standard deviation, that has a value of s=2.
The estimated standard error of the mean is computed using the formula:
[tex]s_M=\dfrac{s}{\sqrt{n}}=\dfrac{2}{\sqrt{500}}=0.0894[/tex]
Then, we can calculate the t-statistic as:
[tex]t=\dfrac{M-\mu}{s/\sqrt{n}}=\dfrac{3.5-4}{0.0894}=\dfrac{-0.5}{0.0894}=-5.5902[/tex]
The degrees of freedom for this sample size are:
[tex]df=n-1=500-1=499[/tex]
This test is a left-tailed test, with 499 degrees of freedom and t=-5.5902, so the P-value for this test is calculated as (using a t-table):
[tex]P-value=P(t<-5.5902)=0[/tex]
As the P-value (0) is smaller than the significance level (0.05), the effect is significant.
The null hypothesis is rejected.
There is enough evidence to support the claim that the batteries power the laptops for significantly less than 4 hours.
................
...
...
Answer:
C............PAC-MAN
Step-by-step explanation:
Can someone please help me I’m stuck I don’t know
Answer:
140
Step-by-step explanation:
Because the lines are parallel:
[tex]\dfrac{DE}{35}=\dfrac{60}{15} \\\\DE=4\cdot 35=140[/tex]
Hope this helps!
Austin is 103 years old Raquel is 35 years old how many years ago was Austin age 5 times Raquel age
Answer:
18
Step-by-step explanation:
Let x represent the years ago
103-x = 5(35-x)
103-x = 175 +5x
4x = 72
x = 18
In 1990, there were 4,500 deaths due to lung diseases in miners aged 20 to 64 years. The expected number of deaths in this occupational group, based on age-specific deaths rates from lung diseases in all males aged 20 to 64 years, was 1,800 during 1990. What is the standardized mortality ratio (SMR) for lung disease in miners
Answer:
2.5
Step-by-step explanation:
We have that the standardized mortality ratio (SMR) is the relationship between the number of deaths observed in a year, that is, those that occurred and the number of expected deaths, that is, those that were predicted.
SMR = observed / expected
therefore if we replace we have:
SMR = 4500/1800
SMR = 2.5
Which means that the standardized mortality ratio (SMR) is 2.5
y - 15=x Solve for Y
Answer:
y = x+15
Step-by-step explanation:
y - 15=x
Add 15 to each side
y - 15+15=x+15
y = x+15
Answer:
[tex]y=x+15[/tex]
Step-by-step explanation:
[tex]y - 15=x[/tex]
Add [tex]15[/tex] on both sides of the equation.
[tex]y - 15+15=x+15[/tex]
The [tex]y[/tex] should be isolated on one side of the equation.
[tex]y=x+15[/tex]
A recent article1 claims that "Green Spaces Make Kids Smarter." The study described in the article involved
2623 schoolchildren in Barcelona. The researchers measured the amount of greenery around the children's schools, and then measured the children's working memories and attention spans. The children who had more vegetation around their schools did better on the memory and attention tests.
(a) What are the cases in this study?
(b) What is the explanatory variable?
(c) What is the response variable?
(d) Does the headline imply causation?
(e) Is the study an experiment or an observational study?
(f) Is it appropriate to conclude causation in this case?
Answer:
Cases : 2623 school children , Explanatory Variable : Greenery or Vegetation around school , Response Variable : Children's Memory & attention spans , Yes causation, Observational study
Step-by-step explanation:
a) Cases refers to the people or units of population studied in the research. In this case, it is sample of 2623 school children in Barcelona
b) Explanatory variable is variable which leads to, or causes the change in other variable. In this case, it is greenery or vegetation around researched students' schools
c) Response variable is the variable which is affected due to change in independent explanatory variable. In this case, it is children's working memory & attention spans
d) Yes, the headline implies causation. As it implies cause effect relationship of greenery around children's school on their working memory & attention spans.
e) It is an observational study, as it observes the variables relationship as it is, without any specific experimental intervention.
en un parque hay una zona de columpios y una pista de patinaje que ocupa en total 5 quintos del espacio .si los columpios ocupan 2 septimos del parque . que fraccion del parque ocupa la pista de patinaje
Answer:
The rink occupies 69% of the whole park, approximately, which is equivalent to 280/408.Step-by-step explanation:
To solve this problem, we need to find the number which express the whole park.
Notice that the park is divided in two sections, one occupies 5/8 of the total, and the other occupies 2/7 of the total. So, the sum would be
[tex]\frac{5}{8}+\frac{2}{7}=\frac{35+16}{56} =\frac{51}{56}[/tex]
Now we have the total space there, we need to divide 5/8 by 51/56, so
[tex]\frac{5}{8} \div \frac{51}{56}=\frac{5}{8} \times \frac{56}{51}=\frac{280}{408} \approx 0.69[/tex]
Therefore, the rink occupies 69% of the whole park, approximately, which is equivalent to 280/408.
Which of the following statements best describes the concept of a function?
Group of answer choices
For a given input value, there is, at most, one output value.
For a given output value, there is, at most, one input value.
For a given input value, there may be more than one output value.
There is no relationship between the input and output values.
Answer:
For a given output value, there is, at most, one input value
Step-by-step explanation:
Given: the concept of function
To find: the statement that best describes the concept of a function
Solution:
A function is a relation in which every value of the domain has a unique image in the codomain.
Input value belongs to the domain and output value belongs to the codomain.
The statement ''For a given output value, there is, at most, one input value'' describes the concept of a function
The statement best describes the concept of a function is
For a given output value, there is, at most, one input value.
Function :
A relation is a function when each input has exactly only one output
Concept :Domain x is the input and range y is the output
In a function , each input x must have exactly only one output.
Input x cannot have two outputs.
The statement best describes the concept of a function is
For a given output value, there is, at most, one input value.
Learn more information about 'functions' here :
brainly.com/question/1593453
Mai is making personal pizzas. For 4 pizzas, she uses 10 ounces of cheese.
Complete question:
Mai is making personal pizzas. For 4 pizzas, she uses 10 ounces of cheese.
a. How much cheese does Mai use per Pizza
b. At this rate how much cheese will she need to make 15 Pizza's
Answer:
a. ounces of cheese per pizza = 10/4 = 2.5 ounces of cheese
b. amount of cheese to make 15 pizzas= 2.5 × 15 = 37.5 ounces of cheese
Step-by-step explanation:
Mai is making a personal pizzas .For 4 pizza she uses 10 ounces of cheese. This means Mai uses 10 ounces of cheese in weight to make just 4 pizzas.
a. How much cheese does Mai use per Pizza
Not she uses 10 ounces of cheese to make 4 pizzas. Therefore,
If 4 pizzas requires 10 ounces of cheese
1 pizza will require ? ounces of cheese
cross multiply
ounces of cheese per pizza = 10/4 = 2.5 ounces of cheese
b. At this rate how much cheese will she need to make 15 Pizza's
Since she requires 2.5 ounces of cheese to make 1 pizza
? ounces of cheese will be required to make 15 pizzas
cross multiply
amount of cheese to make 15 pizzas = 2.5 × 15 = 37.5 ounces of cheese
the distance between the earth and the moon is about 238,900 miles, round this number to the nearest ten thousand
Answer:
230,000
Step-by-step explanation:
You have round in the ten thousands space which is the 3, knowing that the next number is 8 and it is greater than 5 the 3 will round up to a 4
Complete this expression using the distributive property
5(4 + 8) =
O (5 + 4)(5 + 8)
O 5(4) + 8
O 5(4) + 5(8)
O (5+4) + (5 + 8)
Answer:
5(4) + 5(8)
Step-by-step explanation:
Through destributive property, 5 is multiplied by both 4 and 8
Answer:
the person above is right thank and five star them
Step-by-step explanation:
What is the square root of -1?
Answer:
i
Step-by-step explanation:
Why is i the square root of negative one?
The term "imaginary" is used because there is no real number having a negative square. There are two complex square roots of −1, namely i and −i, just as there are two complex square roots of every real number other than zero, which has one double square root.
What’s the correct answer for this question?
Answer:
A.
Step-by-step explanation:
Volume of sphere = (4/3)πr³
= 4/3(3.14)(d/2)³
= 4/3(3.14)(7/2)³
= 4/3(3.14)(3.5)³
= 4/3(3.14)(42.875)
= (1.33)(3.14)(42.875)
= 179.5 cm³
Answer:
The answer is 179.5 cm^2
Please answer this correctly
Answer:
28 and 7
35
Step-by-step explanation:
The area of a triangle is base*height/2, no matter the shape.
So the big one is 8*7/2 = 28 in²
And the little one is 2*7/2 = 7 in²
The total trapezoid therefore has an area of 28+7=35 in²
Is a measure of 22 inches "far away" from a mean of 16 inches? As someone with knowledge of statistics, you answer "it depends" and request the standard deviation of the underlying data. (a) Suppose the data come from a sample whose standard deviation is 2 inches. How many standard deviations is 22 inches from 16 inches? (b) Is 22 inches far away from a mean of 16 inches? (c) Suppose the standard deviation of the underlying data is 4 inches. Is 22 inches far away from a mean of 16 inches?
Answer:
a) 3 standard deviations above 16
b) More than 2 standard deviations of the mean, so yes, 22 inches is faw away from the mean of 16 inches.
c) Less than 2 standard deviations, so not far away.
Step-by-step explanation:
Z-score:
In a set with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the zscore of a measure X is given by:
[tex]Z = \frac{X - \mu}{\sigma}[/tex]
The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the pvalue, we get the probability that the value of the measure is greater than X.
If Z < -2 or Z > 2, X is considered to be far away from the mean.
In this question, we have that:
[tex]\mu = 16[/tex]
(a) Suppose the data come from a sample whose standard deviation is 2 inches. How many standard deviations is 22 inches from 16 inches?
This is Z when [tex]X = 22, \sigma = 2[/tex].
So
[tex]Z = \frac{X - \mu}{\sigma}[/tex]
[tex]Z = \frac{22 - 16}{2}[/tex]
[tex]Z = 3[/tex]
So 22 inches is 3 standard deviations fro 16 inches.
(b) Is 22 inches far away from a mean of 16 inches?
3 standard deviations, more than two, so yes, 22 inches is far away from a mean of 16 inches.
(c) Suppose the standard deviation of the underlying data is 4 inches. Is 22 inches far away from a mean of 16 inches?
Now [tex]\sigma = 4[/tex]
[tex]Z = \frac{X - \mu}{\sigma}[/tex]
[tex]Z = \frac{22 - 16}{4}[/tex]
[tex]Z = 1.5[/tex]
1.5 standard deviations from the mean, so 22 inches is not far away from the mean.
sider F and C below. F(x, y, z) = yz i + xz j + (xy + 4z) k C is the line segment from (1, 0, −2) to (6, 4, 1) (a) Find a function f such that F = ∇f. f(x, y, z) = xyz+2z2+c (b) Use part (a) to evaluate C ∇f · dr along the given curve C.
Answer:
a) The function is [tex]f(x,y,z) = xyz+2z^2[/tex]
b) The value of the integral is 18
Step-by-step explanation:
a) We are given that [tex] F(x,y,z) (yz,xz,xy+4z)[/tex]. We want to find a function f such that the gradient of f is F. That is [tex]\nablda f = F[/tex] . Suppose that such f does exist, if that is the case, then by definition of the gradient, we have that
[tex] F(x,y,z) = (\frac{\partial f}{\partial x},\frac{\partial f}{\partial y},\frac{\partial f}{\partial z})[/tex]
From here, we have that
[tex] yz = \frac{\partial f}{\partial x}[/tex]
if we integrate both sides with respect to x, we get that
[tex] f(x,y,z) = xyz+ g(y,z)[/tex]
where g is a function that depens on y and z only. Now, we differentiate this equation with respect to y and make it equal to the 2nd component of F. That is
[tex] xz + \frac{\partial g}\partial{y} = xz[/tex]
This implies that [tex]\frac{\partial g}{\partial y} =0[/tex]. This means that g actually depends only on z. Until now, f is of the form
[tex] f(x,y,z) = xyz+g(z)[/tex]
If we repeat the previous step, by differentiating with respect to z and making it equall to the third component of F we get
[tex] xy + \frac{\partial g}{\partial z} = xy + 4z[/tex]
This implies that [tex] \frac{\partial g}{\partial z} = 4z[/tex] . If we integrate both sides with respect to z, we get that [tex] g(z) = 2z^2[/tex]
So f is of the form [tex] f(x,y,z) = xyz+2z^2[/tex]
b) To calculate the integral over the given segment, we can use the function f. Since the path is from (1,0,-2) to (6,4,1), then the value of the integral is given by evaluatin f at the end point and the substracting the value of f at the start point, that is
[tex] \int_C F \cdot dr = f(6,4,1) -f(1,0,-2) = 24+2(1)^2- (0+2(-2)^2)) = 18[/tex]
4. The Navarro family uses an average of 225 gallons of water per day, 5 gallons of water per day, 5 gallons of water which goes through the family’s water filter. The Navarros’ water filter can process 450 gallons before it needs to be replaced. After how many days of average water use will the family need to replace their filter?
Answer:
90
Step-by-step explanation:
The family filters 5 gallons per day, so can expect to use the filter for ...
(450 gal)/(5 gal/day) = 90 day
After 90 days of average water use, the family will need to replace the filter.
ASAP! GIVING BRAINLIEST! Please read the question THEN answer CORRECTLY! NO guessing. I say no guessing because people usually guess on my questions.
Answer:
C. [tex]G(x)=\frac{1}{x} -2[/tex]
Step-by-step explanation:
→For the function G(x) to shift downwards 2 units, there must be a 2 being subtracted.
----------------------------------------------------------------------------------------------------
F(x) + c
-Vertical shift and the function is moved c units
-Graph shifts c units up for F(x) + c and c units down for F(x) - c
----------------------------------------------------------------------------------------------------
This means the correct answer is "C. [tex]G(x)=\frac{1}{x} -2[/tex]."
Star Corporation purchased from its stockholders 5,000 shares of its own previously issued stock for $250,000. It later resold 2,000 shares for $53 per share, then 2,000 more shares for $48 per share, and finally 1,000 shares for $43 per share.
In 2017, Star Corporation had the following treasury stock transactions.
Mar. 1 Purchased 5,000 shares at $8 per share.
June 1 Sold 1,000 shares at $12 per share.
Sept. 1 Sold 2,000 shares at $10 per share.
Dec. 1 Sold 1,000 shares at $7 per share.
Instructions
As you know that treasury stocks play a significant role in lowering the public ownership. Considering your understanding, journalize the treasury stock transactions and find the total amount of Paid-in Capital from Treasury Stock at December 31, 2017. What are some other circumstances under which company can go for the purchase of treasury stock? Provide your valuable opinion.
Answer:
Step-by-step explanation:
The objective here is to create a journal entry for the Star corporation treasure stock transaction, then find the total amount of Paid-in Capital from Treasury Stock at December 31, 2017.
Journal Entries:
Date Description $ $
Mar 1 Treasury Stock 40,000
Cash 40,000
June 1 Cash(1,000*12) 12,000
Treasury Stock(1,000*8) 8,000
Paid in Capital(12-8)*1,000 4,000
Sept 1 Cash(1,000*10) 10,000
Treasury Stock (1,000*8) 8,000
Paid in Capital (12-10)*1,000 2,000
Dec 1 Cash (1,000*7) 7,000
Paid in Capital (8-7)*1,000 1,000
Treasury Stock (1,000*8) 8,000
The Beginning Balance:
Treasury Stock Price = 250,000 / 5,000
= $50
Paid in Capital = [2,000×(53-50) + 2,000×(48-50) + 1,000×(43-50)]
= [(2,000×3) + (2,000×-2) + (1,000×-7)]
= 6,000 - 4,000 - 7,000
= -5,000
During the year transactions = 4,000+2,000-1,000
= $5,000
The total amount paid in Capital = Beginning Balance + During the year transactions
= -5,000 + 5,000
= 0
Some other circumstances under which company can go for the purchase of treasury stock includes:
A situation where by they resells the stock in the bid to increase funds for future investment.
The company can go for the purchase of treasury stock in order to empower the financial ratios and have full control interest in the company
It can also aid as a means of increasing the price of the share when it is underpriced in the market.
help help help help help
Answer:
See below
Step-by-step explanation:
a.
[tex]\dfrac{10}{4}=\dfrac{5(2)}{2(2)}=\dfrac{5}{2}[/tex]
b.
[tex]\dfrac{20}{15}=\dfrac{4(5)}{3(5)}=\dfrac{4}{3}[/tex]
c.
[tex]\dfrac{-24}{42}=\dfrac{-4(6)}{7(6)}=\dfrac{-4}{7}[/tex]
d.
[tex]\dfrac{-18}{-14}=\dfrac{-2(9)}{-2(7)}=\dfrac{9}{7}[/tex]
Hope this helps!
Civil engineers often use the straight-line equation, y Bo +B1x, to model the relationship between the mean shear strength of masonry joints and precompression stress, x. To test this theory, a series of stress tests were performed on solid bricks arranged in triplets and joined with mortar. The precompression stress was varied for each triplet and the ultimate shear load just before failure (called the shear strength) was recorded. The stress results for n 7 triplet tests is shown in the accompanying table followed by a printout of the regression analysis. Give a practical interpretation of the estimate of the slope of the least squares line. Round to three decimal places if needed.
Click the icon to view the table of results and the regression analysis
A. or every 1 ton increase in precompression stress, the shear strength of the joint is estimated to increase by 0.987 tons.
B. For a triplet test with a precompression stress of o tons, the shear strength of the joint is estimated to be 1.192 tons.
C. For a triplet test with a precompression stress of 1 ton, the shear strength of the joint is estimated to be 0.987 tons.
D. For every 0.987 ton increase in precompression stress, the shear strength of the joint is estimated to increase by 1 ton.
Answer:
A. or every 1 ton increase in precompression stress, the shear strength of the joint is estimated to increase by 0.987 tons.
Step-by-step explanation:
Hello!
The engineers created a regression model to estimate the relationship between the "shear strength of masonry joints" (Y), measured in tons, and the "precompression stress" (X), measured in tons.
^Y= a + bXi
Using the regression output:
Estimate of the y-intercept: a= 1.192
Estimate of the slope: b= 0.987
In general terms you can interpret the slope as:
"Is the modification of the estimated mean of Y when X increases one unit"
In this case it means that every time the precompression stress increases one ton, the shear strength of the joint is estimated to increase 0.987 tons.
I hope this helps!
Real Estate One conducted a recent survey of house prices for properties located on the shores of Tawas Bay. Data on 26 recent sales, including the number of bathroom, square feet and bedrooms are below.
Selling Price Baths Sq Ft Beds
160000 1.5 1776 3
170000 2 1768 3
178000 1 1219 3
182500 1 1568 2
195100 1.5 1125 3
212500 2 1196 2
245900 2 2128 3
250000 3 1280 3
255000 2 1596 3
258000 3.5 2374 4
267000 2.5 2439 3
268000 2 1470 4
275000 2 1678 4
295000 2.5 1860 3
325000 3 2056 4
325000 3.5 2776 4
328400 2 1408 4
331000 1.5 1972 3
344500 2.5 1736 3
365000 2.5 1990 4
385000 2.5 3640 4
395000 2.5 1918 4
399000 2 2108 3
430000 2 2462 4
430000 2 2615 4
454000 3.5 3700 4
Action:
Use the data above and multiple regression to produce a model to predict the average sale price from other variables. Comment on the following:
a. Regression equation
b. R, R2 and 1-R2, adjusted R2
c. Standard error of estimate
d. Report the t's for each value and the corresponding p-values
e. Overall test of hypothesis and decision
f. Use a .05 level of significance. Cite which variables are significant and which are not significant, based on the t values and p values for each independent variable.
Answer:
Step-by-step explanation:
Hello!
Given the data for the variables:
Y: Selling price of a house on the shore of Tawas Bay
X₁: Number of bathrooms of a house on the shore of Tawas Bay.
X₂: Square feet of a house on the shore of Tawas Bay.
X₃: Number of bedrooms of a house on the shore of Tawas Bay.
The multiple regression model is Y= α + β₁X₁ + β₂X₂ + β₃X₃ + εi
a. Using software I've entered the raw data and estimated the regression coefficients:
^α= a= -5531.01
Represents the mean selling price of the houses when 0 bathrooms, 0 square feet and 0 bedrooms.
^β₁= b₁= -1386.21
Represents the modification of the mean selling price of the houses when the number of bathrooms increases in one unit and the square feet and number of bedrooms remain unchanged.
^β₂= b₂= 60.28
Represents the modification of the mean selling price of the houses when the square feet increase in one unit and the number of bathrooms and bedrooms remain unchanged.
^ β₃= b₃= 54797.08
Represents the modification of the mean selling price of the houses when the number of bedrooms increase in one unit and the number of bathrooms and square feet of the houses remain unchanged.
^Y= -5531.01 -1386.21X₁ + 60.28X₂ + 54797.08X₃
b)
R²= 0.55
R²Aj= 0.49
The coefficient of determination gives you an idea of how much of the variability of the dependent variable (Y) is due to the explanatory variables. Each time you add another explanatory variable to the regression the coefficient increases regarding of real contribution of the new variable. This could lead to thinking (wrongly) that the new variables are good to explain the dependent variable.
The adjusted coefficient of determination is a correction made to the raw coefficient of determination to have a more unbiased estimation of the effect the independent variables have over the dependent variable.
⇒ As you can see both coefficient are around 50%, which means that these explanatory variables
c)
The standard error estimate, this is the estimate of the population variance of the errors. In the ANOVA is represented by the Mean Square of the errors (MME)
Se²= MME= 3837640577.01
Se= 61948.6931
d) and f)
For the hypotheses tests for each slope the t- and p-values are:
α: 0.05
β₁: [tex]t_{H_0}= \frac{b_1-\beta_1 }{Sb_1}[/tex] t= -0.06; p-value: 0.9528 ⇒ Do not reject H₀, the test is not significant.
β₂: [tex]t_{H_0}= \frac{b_2-\beta_2 }{Sb_2}[/tex] t= 2.56; p-value: 0.0180 ⇒ Reject H₀, the test is significant.
β₃: [tex]t_{H_0}= \frac{b_3-\beta_3 }{Sb_3}[/tex] t= 2.28; p-value: 0.0326 ⇒ Reject H₀, the test is significant.
e)
H₀: β₁= β₂= β₃
H₁: At least one βi is different from the others ∀ i=1, 2, 3
α: 0.05
F= 9.03
p-value: 0.0004
⇒ Reject H₀, the test is significant.
I hope it helps!
Which ordered pair is a solution of the equation? y=-6x+1y=−6x+1y, equals, minus, 6, x, plus, 1 Choose 1 answer: Choose 1 answer:Only (-2,13)(−2,13)left parenthesis, minus, 2, comma, 13, right parenthesis (Choice B) B Only (-1,7)(−1,7)left parenthesis, minus, 1, comma, 7, right parenthesis (Choice C) C Both (-2,13)(−2,13)left parenthesis, minus, 2, comma, 13, right parenthesis and (-1,7)(−1,7)left parenthesis, minus, 1, comma, 7, right parenthesis (Choice D) D Neither
Answer:
C Both (-2,13) and (-1,7)
Step-by-step explanation:
Try the offered points in the equation and see if they work
y = -6x +1
For (-2, 13):
13 = -6(-2) +1 = 12 +1 . . . . true
For (-1. 7):
7 = -6(-1) +1 = 6 +1 . . . . true
Both ordered pairs are solutions.
Please help
Convert 200 cm to cm
Answer:
to cm it's still 200 if you mean to metre 2m
Step-by-step explanation:
Answer:
It would still be 200
Step-by-step explanation:
Using the definition of the derivative, find f prime (x ). Then find f prime (1 ), f prime (2 ), and f prime (3 )when the derivative exists.
Step-by-step explanation:
We need the function f(x) to be able to determine the required.
Suppose we were given a function
f(x) = y
f'(x) represents the first derivative of the function f(x) = y.
f'(1) represents the value of the first derivative of the function f(x) = y after replacing x by 1.
f'(5) represents the value of the first derivative of the function f(x) = y after replacing x by 5.
Example: Suppose f(x) = x² + 3x, find
f'(x), f'(1), and f'(5).
f'(x) = 2x + 3
f'(1) = 2(1) + 3 = 5
f'(5) = 2(5) + 3 = 13
Ten teaching assistants are available for grading papers in a particular course. The first exam consists of four questions, and the professor wishes to select a different assistant to grade each question (only one assistant per question). In how many ways can assistants be chosen to grade the exam
Answer:
There are 210 ways
Step-by-step explanation:
The number of ways or combinations in which we can select x elements from a group of n elements where the order doesn't matter can be calculated as:
[tex]nCx=\frac{n!}{x!(n-x)!}[/tex]
So, we have 10 teaching assistants and we need to choose 4 (one assistant per question) to grade each question. It means that n is equal to 10 and x is equal to 4.
Therefore, the number of ways that the assistants can be chosen to grade the exam are calculated as:
[tex]10C4=\frac{10!}{4!(10-4)!}=210[/tex]
f(x)=x^3-3x^2-9x+4 find the intervals on which f is increasing or decreasing b. find the local maximum and minimum values of f. c. find the intervals of concavity and inflection points
Answer:
Please read the complete answer below!
Step-by-step explanation:
You have the following function:
[tex]f(x)=x^3-3x^2-9x+4[/tex] (1)
a) To find the interval on which f is increasing or decreasing, you first calculate the critical points of f(x).
You calculate the derivative f(x) respect to x:
[tex]\frac{df}{dx}=3x^2-6x-9[/tex] (2)
Next, you equal the derivative to zero, and then you find the roots of the polynomial by using the quadratic formula:
[tex]3x^2-6x-9=0\\\\x_{1,2}=\frac{-(-6)\pm\sqrt{(-6)^2-4(3)(-9)}}{2(3)}\\\\x_{1,2}=\frac{6\pm12}{6}\\\\x_1=-1\\\\x_2=3[/tex]
Then, the critical points are x=-1 and x=3
Next, you calculate df/dx for a values of x to the left and to the right of the critical points x1 and x2. If df/dx < 0 the function is decreasing, if df/dx > 0 the function is increasing.
for x = -1.01
[tex]\frac{df(-1.01)}{dx}=3(-1.01)^2-6(-1.01)-9=0.12[/tex]
Then, in the interval (-∞,-1), the function is increasing
for x = -0.99
[tex]\frac{df(-0.99)}{dx}=3(-0.99)^2-6(-0.99)-9=-0.11[/tex]
In the interval (-1,3) the function is decreasing
for x = 3.01
[tex]\frac{df(3.01)}{dx}=3(3.01)^2-6(3.01)-9=0.12[/tex]
In the interval (3,+∞) the function is increasing
b) To find the local minimum and maximum you use the second derivative of the function:
[tex]\frac{d^2f}{dx^2}=6x-6[/tex] (3)
you evaluate the second derivative for the critical points x1 and x2, if the second derivative is positive, you have a local minimum. If the second derivative is negative, you have a local maximum:
for x1 = -1
[tex]6(-1)-6=-12<0[/tex]
x=-1 is a local maximum
for x2 = 3
[tex]6(3)-6=12>0[/tex]
x=3 is a local minimum
c) upward concavity: (-1,3)
downward concavity: (-∞,-1)U(3,+∞)
The inflection points are calculated with the second derivative equal to zero:
[tex]6x-6=0\\\\x=1[/tex]
For x = 1 you have an inflection point
Perform the indicated operation and write the result in the form a + bi i^100
[tex]i^{100}=i^{4\cdot25}=\left(i^4\right)^{25}[/tex]
Recall that [tex]i^4=1[/tex], since [tex]i^2=-1[/tex]. Then
[tex]i^{100}=1^{25}=1[/tex]
so that in the form [tex]a+bi[/tex], we have [tex]a=1[/tex] and [tex]b=0[/tex].
Answer:
D) 1
Step-by-step explanation:
Correct on edg