based on the law of multiple proportions, how many grams of hydrogen would you expect 2.58 g of nitrogen to combine with to yield ammonia?

An unknown element has three naturally occurring isotopes total average atomic mass 20.18 amu and element from the periodic table is neon

Isotopes are the members of a family of an element that all have the same number of protons but different numbers of neutrons

There are three neon isotopes and the more abundant ²⁰Ne and ²¹Ne are both essentially all primordial, as there is no significant global production of these isotopes and also ²²N

Neon 20 is made up of ten proton and ten neutron the atomic mass unit of the gas is 19.992 and the abundance of the gas is 90.48% and neon 21 is made up of ten proton and eleven neutron and the atomic mass unit of the gas is 20.994 and the abundance is 0.27% and neon 22 is made up of ten proton and twelve neutron and the atomic mass unit of the gas is 21.991 and the abundance of gas is 9.25%

Unknown element from the periodic table is neon

Know more about isotopes

https://brainly.com/question/13658643

#SPJ1

The true statement about the model is that the model shows how the various atoms are connected in the molecule.

A molecular model is a representation of a molecule. We know that the molecular model shows the extent to which the atoms are bonded in the compound. The model gives us an idea of the intricate atom to atom arrangement that exists in the molecule that is under study.

Now we know that the atoms that are in the models must be shown by the use of different colors. This enables us to be able to effectively and properly distinguish between the atoms of the compound as shown in the model.

The true statement about the model is that the model shows how the various atoms are connected in the molecule.

Learn more about molecular models:https://brainly.com/question/156574?

#SPJ1

The mass of barium carbonate containing 10% impurities if 6.72 liters of CO₂ were formed when hydrochloric acid was added to it is 65.78 g.

The mass of barium carbonate containing 10% impurities that produced 6.72 liters of CO₂ when hydrochloric acid was added to it is determined  from the equation of the reaction as follows:

Equation of the reaction: BaCO₃ + 2 HCl → BaCl₂ + H₂O + CO₂

Based on the equation of the reaction, 1 mole of  barium carbonate produces 1 mole of CO₂.

1 mole of CO₂ has a volume of 22.4 liters

6.72 liters of CO₂ = 6.72/22.4 moles

6.72 liters of CO₂ = 0.3 moles

Moles of BaCO₃ reacted = 0.3 moles

Molar mass of BaCO₃ = 197.34 g/mol

Mass of 0.3 moles of BaCO₃ = 0.3 * 197.34 g/mol

Mass of 0.3 moles of BaCO₃ = 59.2 g

Since the barium contains 90% pure BaCO₃ and 10% impurity,

Mass of barium carbonate reacted =  59.2 g/0.9

Mass of barium carbonate reacted = 65.78 g

Learn more about mass and moles at: https://brainly.com/question/13314627

#SPJ1

The electron configuration is 1s², 2s², 2p⁶, 3s²,3p⁶, 4s², 3d¹⁰, 4p⁵ i.e. 35 that is bromine.

Electronic configuration is defined as the arrangement of electrons around the nucleus of a particular atom or molecule.

An atom is made up of particles like protons, neutrons and electrons.

A neutral atom are the atoms with same number of protons and electrons.

Electronic configuration of an atom is defined as distribution of electrons in atoms shells and sub shells.

Bromine is element with symbol Br and atomic number 35. It is a oily liquid with a sharp smell, it is toxic in nature.

The neutral atom of bromine has 35 electrons as the neutral atom has same number of electrons and protons.

Thus, the electron configuration is1s², 2s², 2p⁶, 3s²,3p⁶, 4s², 3d¹⁰, 4p⁵, i.e. 35 that is bromine.

To learn more about  electron configuration, refer to the link below:

https://brainly.com/question/14283892

#SPJ1

The simple unit factor that relates the number of hydrogens in sucrose to the number of oxygens is:

2 moles hydrogen = 1 mole of oxgen

The formula of sucrose is given as follow:

C₁₂H₂₂O₁₁

From the formula, we obtained the following

1 mole of C₁₂H₂₂O₁₁ contains:

Thus, the unit factor that relates hydrogen and oxygen can be obtained as follow:

Hydrogen / Oxygen = 22 / 11

Hydrogen / Oxygen = 2 / 1

Thus,

2 moles hydrogen = 1 mole of oxgen

Thus, for every mole of oxygen, there are 2 moles of hydrogen

Learn more about ratios in organic compounds:

https://brainly.com/question/7341200

#SPJ1

Option 4- no, no, no, no. (for physical change.)

Chemical Change -A chemical change is the conversion of one substance into another, the development of new chemicals with unique features, or any combination of these.

There are five (simple) methods for identifying a reaction:

1. change of color

2. Gas formation

3. pH change

4. Temperature change

5. Precipitate formation

Physical change - A physical change happens when a substance's physical characteristics change without undergoing chemical composition. Common physical changes include melting, adjustments to size, volume, color, density, and crystal structure.

Therefore, according to the question physical changes are-

1. Reacts with another substance- no

2. Temperature change - no

3. Gas, sound, or light produced - no

4. New substance formed - no

To learn more about Physical change refer - https://brainly.com/question/14444325

#SPJ9

A hydrogen atom's diameter in its ground state is 1.06 x 10^-10 metres.

learn more about hydrogen atom here

https://brainly.com/question/13796082

#SPJ4

the question you are looking for is

Practice entering numbers that include a power of 10 by entering the diameter of a hydrogen atom in its ground state, dh= 10.6x10^-11m, into the answer box.

the isotopes mass number is 36

Explanation:

because atomic number is also mass number

volume=6.5cm³

Explanation:

density= mass/ volume

volume= mass/ density

= 68/10.5

=6.5cm³

When all quantum numbers are considered, there are three (3) quantum states for hydrogen atoms.

The 3 quantum numbers of hydrogen is n, l and m.

n = principal quantum number, l = angular momentum quantum number,

m = angular momentum projection quantum number.

The hydrogen atom is simple and consists of a single negatively charged electron which moves around a proton which is positively charged. For hydrogen atom of specific energy, the number of states depends on the angular momentum. The total energy depends on the principal quantum.

To learn more about quantum numbers ;

https://brainly.com/question/2292596

#SPJ4

Answer:

there are four protons in the nucleus

ENC explains all periodic trends

The electrostatic attraction between the positively charged nucleus and the negatively charged electrons holds electrons in an atom or ion. Due to electron shielding that exists between the electron of interest and the nucleus in multi-electron species, the electrons do not experience the full positive charge of the nucleus. The effective nuclear charge is the total positive charge that really affects an electron.

In order to comprehend periodic characteristics, it is crucial to understand the idea of effective nuclear charge (Z*). The portion of the total nuclear charge that an electron in an atom experiences is known as the effective nuclear charge. This is equal to the atomic number (Z) less the amount () by which other atoms' electrons protect the particular atom's nucleus.

To learn more about periodic trends from the given link:

brainly.com/question/12074167

#SPJ9

We're going to use 0.34 grams of nitrogen to resolve this. This would have a molar mass of, uh, 28 2 grams if we converted these two moles. Wu will then combine this as well. One-mole play is also a thing. three of H 2's moles. Grams of hydrogen are what we need. We will learn the answer here. Hydrogen weighs two grams per mole. Each gram weighs 0.501 grams. That would thus stand in for this. 2.34 grams of nitrogen would need to react with 0.501 grams of hydrogen to produce ammonia. 241=2 moles of nitrogen and 243=6 moles of hydrogen will be converted into 4 moles of ammonia. Nitrogen has a molar mass of 28 g/mol and hydrogen has a molar mass of 2 g/mol.

To know more about law of multiple proportions refer to http://brainly.com/      

Answer:

Electron gain enthalpy is defined as the amount of energy released when an electron is added to an isolated gaseous atom. 

The three isotopes of Neon, Ne-20, Ne-21, and Ne-22 are said to have an atomic number. Neon - 20 with a mass of 19.99 amu predominate all other isotopes.

Isotopes as been defined as atoms of the same element with different atomic masses but the same atomic number as the number of neutrons differs in the atoms. The neon element has three isotopes, Ne-20, Ne-21, and Ne-22.

Ne - 20 is the most predominant isotope of the Neon element as it most abundant and stable isotope with an abundance of 90.48% followed by Ne-22 (9.25%), and Ne-21 (0.27%).

Therefore, Ne-20 is a predominant isotope of Neon.

Learn more about isotopes, here:

https://brainly.com/question/27475737

#SPJ4

Using Pasteur Pipettes (or pipets) are the most commonly used tool for transferring small volumes of liquids (< 5mL) from one container to another.

A pipette, also called pipett, is a lab instrument frequently used in the fields of chemistry, biology, and medicine to transfer a predetermined volume of liquid, frequently as a media dispenser. Pipettes are available in a variety of styles with varying degrees of accuracy and precision, ranging from simple single-piece glass pipettes to more intricate adjustable or electronic pipettes. In order to draw liquid up and out of a pipette, a partial vacuum is often created above the liquid-holding chamber and then selectively released. Depending on the instrument, measurement accuracy varies substantially.

Although each form of pipette has particular descriptive titles, in practice any sort of pipette will only be referred to as a "pipette," and the required device will be clear from the context. Occasionally, pipettes that dispense.

To learn more about Pasteur Pipettes from the given link:

https://brainly.com/question/28317009

#SPJ4

When 224 g of calcium carbonate(CaCO3) decomposes , 2.24 moles of carbon dioxide is produced.

When calcium carbonate decomposes in the presence of heat, it produces calcium oxide and carbon dioxide. This reaction is represented by the following equation:

CaCO3 ⇒ CaO + CO2

It is clear from the above equation that,

1 mole of CaCO3 produces 1 mole of CO2

Or 100 g of CaCO3 produces 1 mole of CO2

Thus, 224 g of CaCO3 produces 1/100 x 224 = 2.24 moles of CO2

Therefore, if 224 g of calcium carbonate(CaCO3) decomposes, 2.24 moles of carbon dioxide is produced.

To know more about "calcium carbonate", refer to the link given below:

https://brainly.com/question/8764175?referrer=searchResults

#SPJ4

The correct answer is (A) pigment mixed with egg yolk as a binder.

A natural emulsion that is water-soluble, such as glue, honey, milk in the form of casein, or a variety of plant-based gums, can hold pigment in tempera, a painting media.

Using tempera, you can blend the essential colours as you go while creating the paint from scratch. Although it should be noted that some pigments require more binder than others and that the more egg added, the more transparent the resultant paint will be, mixes should begin with an equal volume of pigment and binder.

From the early 1500s, when oil paints started to gain popularity, tempera served as the main painting medium, it was employed for icon painting and painted panels in churches, and it is still utilised today.

To learn more about emulsion, refer this link.

https://brainly.com/question/6711819

#SPJ4

When carbon (IV)oxide gas is passed over heated charcoal ,the gas produced is Carbon Monoxide.

The oxidation state of carbon (II) oxide, often known as carbon monoxide, is +2. It is the suffocating gas created when gasoline in car engines burns inefficiently. Colorless, tasteless, odorless, and somewhat less dense than air, carbon monoxide is a gas. It is formed due to incomplete combustion of CO2. Carbon monoxide is much more threatening than CO2.

When carbon (IV)oxide gas is passed over heated charcoal ,the gas produced is Carbon Monoxide is Carbon (II) oxide is formed.

When coke or red-hot carbon is passed through carbon (IV) oxide, it is created.

The equation for the reaction is-

CO₂(g) + C(s)   →   2CO(g)

Hence, Carbon monoxide is formed when Carbon dioxide is passed over heated charcoal.

To learn more about Carbon monoxide refer- https://brainly.com/question/25350361

#SPJ9

the synthesis study of triaryl-1,3,5-triazinane-2,4,6-triones is functionalized by d6-transition metal acetylides complexes at their periphery .

triaryl-1,3,5-triazinane-2,4,6-triones (isocyanurates) peripherally functionalized by donor groups: The linear optical (LO) and nonlinear optical (NLO) properties of a series of isocyanurates functionalized by donor's arms at the periphery. These octupolar derivatives were obtained from commercial isocyanate derivatives several of these derivatives exhibit remarkable transparency or activity/ tradeoffs. In third‐order activity, the stronger donor groups (X=NH2, NMe2, or NPh2) with the longer derivatives possess effective two‐photon absorption cross sections displayed for the extended arylamino cyclotrimers. to rationalize their non linear properties and unravel their electronic structures DFT computations were also performed.

To know more about isocyanurates refer to the link  https://brainly.com/question/27507786?referrer=searchResults.

#SPJ4

The lipid rafts are less fluid than the surrounding membrane at normal temperatures.

Cholesterol decreases the fluidity of the membrane at normal temperatures.

Lipid rafts regulate neurotransmission, receptor traffickinging and influence membrane fluidity.

Membrane fluidity refers to the viscosity of the lipid bilayer.

Cholesterol in the rafts has a potential to effectively control the ion conductance and excitability of membranes.

For example, in phospholipid layer in cell membrane, there are hydrophilic heads (polar part of the layer) and hydrophobic tails (nonpolar part of the layer).

1) Small, non-polar molecules diffuse easily through this layer, no energy is required, this is passive transport.

2) Polar molecules cannot diffuse through phospholipid layer using passive transport, because hydrophobic tails does not allow that (polar molecules are reppeled), energy is required for that, this is active transport.

More about cholesterol: brainly.com/question/841110

#SPJ4

So they can have nutrients from the water to keep it from not dying

Answer:

Plants need water to grow. Plants are about 80-95% water and need water for multiple reasons as they grow including for photosynthesis, for cooling, and to transport minerals and nutrients from the soil and into the plant.

When you add a proton to make lithium more positive we get beryllium

When you add a proton to make lithium more positive and does't make lithium cation it make beryllium and isotope of beryllium that is an ion, as it has one less electron than the protons and the only factor that determines the identity of your element is the proton number when we added a proton in lithium then we get  beryllium and new atom would not actually be an atom if add one proton and when adding or removing protons from the nucleus changes the charge of the nucleus and changes that atom's atomic number

Know more about lithium

https://brainly.com/question/28640313

#SPJ1

Answer:

homogenous mixture

Explanation:

no choices are given so that is my best guess

Answer:

aaaaaaaaaaaaa

Explanation:

aaaaaaaaaaaaaaaa

Explanation:

The Periodic Law states that the physical and chemical properties of the elements recur in a systematic and predictable way when the elements are arranged in order of increasing atomic number. Many of the properties recur at intervals. When the elements are arranged correctly, the trends in element properties become apparent and can be used to make predictions about unknown or unfamiliar elements, simply based on their placement on the table.

Answer:

The periodic law states that, "properties of the elements very periodically with their Relative Atomic Mass

Explanation:

Then the modern periodic law states that, "The chemical and physical properties of element are a periodic function of the atomic number"

Hope it helps

Answer:

I'm guessing you are asking for the word that will make the hypothesis correct. In that case, it would be:
"If the mass of a sample of water is increased, then the rate at which it's temperature changes will be decreased."

Explanation:

Mass and temperature have an inverse relationship, so when one of the values increase, the other decreases. On Study.com there is more on this subject. I will put a link for you :)

https://homework.study.com/explanation/how-does-the-amount-of-a-substance-affect-the-rate-at-which-temperature-changes.html#:~:text=For%20a%20given%20amount%20of,a%20smaller%20increase%20in%20temperature.

I hope this helps!

A. Hot Plate - Materials are heated using hot plates. A stove may readily take the place of this equipment.

B. Test Tube Holder - Kitchen tongs, which come in various sizes, can be utilized in the absence of test tube holders.

C. Beakers and flasks are used for both measuring liquids and combining various ingredients. At home, measuring cups and measuring spoons can take their place because they are wide or tall enough to be used for mixing and still have the ability to be used to measure the ingredients.

D. Stirring Rod - A stirring rod can be replaced by a variety of items. Chopsticks are an example because of their similar shape, as are spoons, ladles, and forks if the container allows them.

E. Funnel - Typically, the material used to make a kitchen funnel and a laboratory funnel is the sole distinction. Kitchen funnels are often made of plastic, whereas laboratory funnels are made of heat-resistant glass. Nevertheless, as long as it is not exposed to extremely high temperatures, it can still perform the duties of a standard laboratory funnel.

1. Before conducting any type of experiment, you should always be familiar with your lab's equipment because, without it, you won't know how to use your materials or how to fix a mistake you might make with it.

2. You may aid in preventing or eliminating hazards by being familiar with the laboratory you're working in and by constantly adhering to the correct safety protocols. Additionally, you'll be aware of what to do in the unfortunate case that something goes wrong.

To learn more about laboratory tools refer- https://brainly.com/question/13231667

#SPJ9

To produce 807 kJ of heat, 33.85g of methanol ([tex]CH_3OH[/tex]) must be burned.

When -764.0 kJ of heat is involved, 1 mol of methanol, [tex]CH_3OH[/tex] is reacting

Therefore, mol of [tex]CH_3OH[/tex] for -8.07 x [tex]10^2[/tex] kJ:

= -8.07 x [tex]10^2[/tex] x 1/-764.0 kJ

= 1.056 mol

Molar mass of methanol ([tex]CH_3OH[/tex]),

MM = 1 x MM(C) + 4 x MM(H) + 1 x MM(O)

= 1 x 12.01 + 4 x 1.008 + 1 x 16.0

= 32.042 g/mol

mass of methanol ([tex]CH_3OH[/tex]) used:

Mass, m = number of mol x molar mass

= 1.056 mol x 32.04 g/mol

= 33.85 g

Hence, 33.85g of methanol ([tex]CH_3OH[/tex]) must be burned to produce 807kJ of heat.

The complete question is:

When methanol, [tex]CH_3OH[/tex], is burned in the presence of oxygen gas, [tex]O_2[/tex], a large amount of heat energy is released. For this reason, it is often used as a fuel in high performance racing cars. The combustion of methanol has the balanced, thermochemical equation

[tex]CH_3OH (g) + 32O_2 (g) \rightarrow CO_2 (g) + 2H_2O (l)[/tex]  Δ= −764 kJ

How much methanol, in grams, must be burned to produce 807 kJ of heat?

Learn more about Methanol here:

https://brainly.com/question/10886248

#SPJ4