Answer:
your answer will be photosynthesis
Explanation:
What is the definition of a scientific theory
A) A method of learning that emphasizes reason as the way to understand the world.
B) A brief statement that summarizes past observations and predicts future ones.
C) A model that explains the underlying reasons for observations and laws.
D) The equivalent of a scientific opinion which others may disagree with.
E) None of these.
Answer:
The correct answer to the following question will be Option C.
Explanation:
The theory seems to be the context within which findings are explained as well as possible predictions are made. This theoretical perspective discusses the factors behind the results as well as the laws.Theories have been used in scientific knowledge to give wide interpretations to accommodate observed facts in case the root reason is still yet to be found as well as characterized.So that Option C will be the right answer.
What is the name of Al2(CO3)3 ?
Answer: Aluminum Carbonate
Explanation:
Answer:
Aluminum carbonate.
Explanation:
It is an aluminum salt form of carbonic acid.
Respiration occurs in the __________
Respiration occurs in the mitochondria
Answer:
mitochondria
Explanation:
Respiration happens in the cells of plants, animals and humans, mainly inside mitochondria.
Builders and dentists must store plaster of Paris,
CaSO4 x 1/2 H2O, in airtight containers to prevent it from
absorbing water vapor from the air and changing to
gypsum, CaSO4 x 2H2O How many liters of water
vapor evolve when 2.00 kg of gypsum are heated at
110°C to produce plaster of Paris? At 110°C, the
density of water vapor is 0.574 g/L.
In order to determine the amount of water that evaporates from we need to convert the mass into volume.
What temperate is required to produce the POP ?The builders and the density use the plaster of Paris called POP and are a CaSO4 x 1/2 H2O is used for the airtight containers to stop them from taking in water vapors from the air and changes into gypsum that is CaSO4 x 2H2O. The answer is given as below. Answer:
The plaster of Paris is used for coating the walls and the celling from the aspects of molding. Its also used for casting decorative elements.
It absorbs water from the air and vapor evolves when the 2.00 kg of gypsum is heated at 110 degrees. C.
Find out more information about the Builders and dentists.
brainly.com/question/14644606.
Which of he following is a secondary alkanol?
a. CH3CH2CH2OH
b. CH3CH2CH2CH2OH
c. C(CH3)3OH
d. CH3CH(OH)CH3
Answer: Thus [tex]CH_3CH(OH)CH_3[/tex] is a secondary alkanol.
Explanation:
Alkanol are compounds which contains carbons bonded by single bonds and contains hydroxy (-OH) as functional group.
Primary alkanol are those compounds which contain hydroxyl group attached a carbon which is further attached to a single carbon atom. Example: [tex]CH_3CH_2CH_2OH[/tex] and [tex]CH_3CH_2CH_2CH_2OH[/tex]
Secondary alkanol are those compounds which contain hydroxyl group attached to a carbon which is further attached to two more carbon atoms.Example: [tex]CH_3CH(OH)CH_3[/tex]
Tertiary alkanol are those compounds which contain hydroxyl group attached to a carbon which is further attached to three more carbon atoms. Example: [tex]C(CH_3)_3OH[/tex]
Thus [tex]CH_3CH(OH)CH_3[/tex] is a secondary alkanol.
Describe one way in which uranium is disposed of.
Answer:
In the oxide form, uranium can be disposed of as low-level radioactive waste at an approved disposal facility. Approximately 350,000 tons of anhydrous HF are used annually in the United States.
Explanation:
If the atmospheric pressure in the laboratory is 1.2 atm, how many moles of gas were in each syringe? (Hint: Choose one volume and temperature pair from your data table to use in your ideal gas law calculation.)
Answer:
A: 2.525 x 10-4 mol
B: 2.583 x 10-4 mol
Explanation:
Part A:
Data Given:
. Temperature of water (H2O) = 21.3°C
Convert Temperature to Kelvin
T = °C + 273
T = 21.3 + 273 = 294.3 K
volume of (H2O) gaseous state = 5.1 mL
Convert mL to liter
1000 mL = 1L
5.1 ml = 5.1/1000 = 0.0051 L
Pressure = 1.2 atm
. no. of moles = ?
Solution
no. of moles can be calculated by using ideal gas formula
PV = nRT
Rearrange the equation for no. of moles
n=PV/RT......... (1)
where
P = pressure
V = Volume
T= Temperature
n = Number of moles
R = ideal gas constant
where
R = 0.08206 L.atm/ mol. K
Now put the value in formula (1) to calculate no. of moles of
n = 1.2 atm x 0.0051 L / 0.08206 L.atm.mol-1. K-1 x 294.3 K
n = 0.0061 atm.L / 24.162 L.atm.mol-1
n = 2.525 x 10-4 mol
no. of moles of gas (H2O) = 2.525 x 10-4 mol
Part B:
Data Given:
Temperature of water (H2) = 21.3°C
Convert Temperature to Kelvin
T = "C + 273
T= 21.3 + 273 = 294.3 K
volume of (H2) gas = 5.2 mL
Convert mL to liter
1000 mL = 1 L
5.2 ml = 5.2/1000 = 0.0052 L
Pressure = 1.2 atm
. no. of moles = ?
Solution
no. of moles can be calculated by using ideal gas formula
PV = nRT
Rearrange the equation for no. of moles
n= PV / RT......... (1)
where
P = pressure
V = Volume
T= Temperature
n = Number of moles
R = ideal gas constant
where
R = 0.08206 L.atm/mol. K
Now put the value in formula (1) to calculate no. of moles of
n = 1.2 atm x 0.0052 L/0.08206 L.atm.mol-1. K-1 x 294.3 K
n = 0.0062 atm.L/ 24.162 L.atm.mol-1
n = 2.583 x 10-4 mol
I
no. of moles of gas (H2) = 2.583 x 10-4 mol
A certain man needed 400N of force to pull a load through a distance of 150cm in 8s . Calculatell i) the work done by man ii) the power developed by man
Answer:
a) 600 J
b) 75 W
Explanation:
Force= 400 N, distance = 150 cm = 1.5 m, time= 8s
a) Work is the product of force acting on an object and distance (or displacement). The S.I unit of work is the joules.
Work = force × distance = 400 × 1.5 = 600 J
b) Power is the amount of energy transferred per unit time. It is the ratio of work to time. The S.I unit of power is watt
Power = work/time = 600 / 8 = 75 W
Why are the electrons in a bond between carbon and oxygen, C-O, closer to the oxygen atom than the carbon atom?
Answer:
Because electronegativity of Oxygen is higher than electronegativity of Carbon.
Explanation:
The electrons in a bond between carbon and oxygen, C-O, closer to the oxygen atom than the carbon atom because electronegativity of Oxygen is higher than electronegativity of Carbon.
I NEED HELP PLEASE, THANKS! :)
Respiration is a three-step process that breaks down glucose and produces ATP. What are those three steps? Explain.
Answer:
Ok so the first step is glycolysis(which involves 10 different 'steps') which is conducted in the cytosol, so this is where glucose breaks down into two molecules of pyruvate.
The breakdown of glucose releases energy which changes ADP to ATP and NAD+ to NADH.
The second step is commonly known as the Krebs Cycle or Citric Acid Cycle(involves 11 steps). This is where pyruvate is broken down into 3CO2.
The breakdown of pyruvate releases energy which changes ADP to ATP, NAD+ to NADH and FAD+ to FADH2
The third step is known as oxidative phosphorylation, this is where energy from NADH and FADH2 is used to generate a H+ gradient, which changes ADP to ATP.
Answer:
Glycolysis, Citric Acid Cycle, and the Electron Transport Chain
Explanation:
Cellular respiration is the process in which cells break down glucose and release the stored energy to make ATP.
Step 1 — Glycolysis
Glycolysis is the conversion of glucose — a C₆ molecule — into two C₃ (pyruvate) fragments.
Step 1a. The linking reaction — pyruvate oxidation
In preparation for the second step, each pyruvate ion loses a carbon atom as CO₂ and forms a two-carbon acetyl group.
The acetyl group is transferred to Coenzyme A to produce acetyl CoA.
Step 2 — the Citric Acid Cycle (CAC)
The acetyl CoA enters the CAC.
In various redox reactions, the C atoms in the acetyl group are oxidized to CO₂.
The electrons are passed to energy-storing molecules like NADH and FADH₂.
3. Step 3 — the Electron Transport Chain (ETC)
The NADH and FADH₂ pass their electrons to the Electron Transport Chain
In a series of redox reactions, the electrons reduce oxygen to water.
The energy released converts ADP to ATP (oxidative phosphorylation)
The whole purpose of respiration is to oxidize glucose to CO₂ and water and use the energy produced to form ATP.
One molecule of glucose produces 2 ATP in glycolysis, 2 in the CAC, and 34 in the ETC.
When 0.3 moles of acetylene is burned , total mole number of the products will be? a- 0.30 mol b-0.60 mol c-0.75 mol d-0.90 mol e- 1.2 mol
Answer:
d. 0.9 mol
Explanation:
On this case we have to start with the formula of acetylene:
[tex]C_2H_2[/tex]
Now we can write the chemical reaction of combustion:
[tex]C_2H_2~+~O_2~->~CO_2~+~H_2O[/tex]
The next step is to balance the reaction:
[tex]2C_2H_2~+~5O_2~->~4CO_2~+~2H_2O[/tex]
The molar ratio between [tex]C_2H_2[/tex] and [tex]CO_2[/tex] is 2:4, so:
[tex]0.3~mol~C_2_H_2\frac{4~mol~CO_2}{2~mol~C_2H_2}=0.6~mol~CO_2[/tex]
The molar ratio between [tex]C_2H_2[/tex] and [tex]H_2O[/tex] is 2:2, so:
[tex]0.3~mol~C_2_H_2\frac{2~mol~H_2O}{2~mol~C_2H_2}=0.3~mol~H_2O[/tex]
The total moles would 0.6 + 0.3=0.9 moles.
I hope it helps!
plsss answer this?? i need help
Answer:
85.34 g of oxygen
Explanation:
Carbon and Oxygen combine in ratio 3:8 to form CO2
Weight of C = 32g
3g of carbon reacts with 8g of oxygen
1g of carbon reacts with 8/3 g of oxygen
32 g of carbon reacts with 8/3 (32)
= 256/3
= 85.34 g of Oxygen
Hope it helps....
let's consider the effectiveness of two antacids to illustrate how chemical calculations can be important in daily life. Baking soda NaHCO3, is often used as an antacid. It neutralizes excess hydrochloric acid sereted by stomach. The balanced equation for the reaction is NaHCO3(s)+HCl(aq)=H20(l)+CO2(g). Milk of magnesia, which is an aqueous suspension of magnesium hydroxide, Mg(OH)2(s)+2HCl(aq)=2H20(l)+MgCl2(aq), Which anatacid can consume the most stomach acid, 1.00g of NaHCO3,or 1.00g of Mg (OH)2?
Answer:
Milk of Magnesia would consume the most stomach acid at almost 3 times the amount as baking soda.
Explanation:
Baking Soda = NaHCO3(s)+HCl(aq)=H20(l)+CO2(g)
NaHCO3 Molar mass of 84.007 g/mol
0.012 Moles of NaHCO3 and since an equal ratio of HCl is required
we therefore neutralize 0.012 Moles of HCl
Milk of magnesia = Mg(OH)2(s)+2HCl(aq)=2H20(l)+MgCl2(aq)
Mg(OH)2(s) Molar mass: 58.3197 g/mol
0.017 Moles of Mg(OH)2 and the ratio is 2:1, so 2 moles for each 1 mole of Mg(OH)2, so we need 0.034 Moles of HCl
The ____ contains the highest concentration of ozone. (troposphere (exosphere ( stratosphere ( mesosphere
Answer:
the answer is stratosphere.
about 90% of ozone is found in the stratosphere.
Match each element to the correct description of its usual behavior in a chemical reaction.Silicon (Si)Argon (Ar)Sodium (Na)Will lose electrons
Answer:
Sodium (Na) — Will lose electrons
Silicon (Si) — Will lose electrons
Argon (Ar) — No reaction
Hope this helps.
In the Lewis dot structure for H2CCH2, how many bonds are between the carbon atoms?
3
4
1
2
Answer:
2
Explanation:
The compound H2CCH2 has the condensed formula C2H4. The name of the compound is ethene. The compound is unsaturated, that is, it contains multiple bonds. The compound has a formula which fits into the general molecular formulae of alkenes (olefins) which his CnH2n.
Olefins have a double bonds between the carbon atoms. That is , the two carbon atoms in Olefins are connected via a double covalent bond. This now implies that the two carbon atoms in ethene (C2H4) are connected by two covalent bonds in the lewis structure of the molecule as is common for Olefins.
In the Lewis dot structure for [tex]\rm H_2CCH_2[/tex], there is one covalent bond present between the carbon atoms. The correct answer is option c.
A dot structure is a method of depicting an atom's valence electrons by placing dots around the atomic symbol. One valence electron is represented by each dot.
In the Lewis dot structure of [tex]\rm H_2CCH_2[/tex], there is one bond between the carbon atoms. This is because each carbon atom has two electrons in its valence shell, and each hydrogen atom has one electron in its valence shell.
The two carbon atoms share two electrons to form one covalent bond, and each carbon atom also shares one electron with a hydrogen atom to form two additional covalent bonds.
Therefore, the correct answer is option c. There is one bond (covalent bond) between the carbon atoms in the Lewis dot structure for [tex]\rm H_2CCH_2[/tex].
Learn more about dot structure here:
https://brainly.com/question/28652824
#SPJ6
why is copper different than copper ore gives me reasons. Do this asap
Answer:
copper cathodes are normally referred to when talking about copper. Cathode is the purest form of copper and is the feedstock used to produce copper wire, cable, sheet, strip, tube, etc.
Explanation:
what will happen if we burn carbon monoxide In a closed room??
Answer:
the carbon monoxide will release blue fumes
The melting point of three solids X,Y and Z are 298K, 314 K and 398K respictively.Arrange these in increasing order of their inter particle force of attraction
Answer:
Explanation:
The higher the melting point of a substance, then the higher the force of attraction. Which means there is direct relationship between the melting point and force of attraction.
The increasing order of interparticle force of attraction of the the three particles are
Z(398) Y(314) X (298)
I.e Particle " Z " have highest melting point, follows by particle "Y" follows by particle "X
NOTE: The melting point of a substance refers to the
temperature whereby there there is a change from solid state to liquid state, it is dependent on the pressure of the system
Only purple flowers result from a cross between purple-flowered pea plants and white-flowered pea plants. What does this indicate?
Purple flowers are a mutation
Purple flowers are recessive
Purple flowers are dominant
Purple flowers are hybrid
Answer:
Purple flowers are dominant
Explanation:
What do all pure substances have in common?
Answer:
All the pure substances are made up of atoms and group of atoms known as molecules. They also have weight, volume and colour white solids also have the shape and hardness or texture. Pure substances also have points at which they boil and solidify.
Answer:
Pure substances are defined as substances that are made of only one type of atom or molecule. The purity of a substance is the measure of the extent to which a given substance is pure.
Explanation:
The chemical formula is different from the empirical formula in
A) H2O2
B) CO2
C) CO.
OD) H20.
Answer:
A) H2O2
Explanation:
Hydrogen peroxide is written as H2O2, which is the chemical formula of the compound, but this can be simplified. Since both H and O have the subscript of 2, they can be simplified to 1, so the empirical formula for H2O2 would be just H and O together (Brainly won't let me say the empirical form because it has the same spelling as a swear word). Thus, the empirical formula and chemical formula are different.
In the case of the other options, they are all in their simplest form and cannot be simplified further, so they are already in their empirical form, so both the chemical form and empirical form are the same.
The diagram shows Niels Bohr’s model of an atom.
A small green circle labeled Proton is surrounded by 4 concentric circles. The space inside the first concentric circle is labeled N = 1; the space between the first and second circle is labeled N + = 2; between the second and third N = 3, and between the third and fourth N = 4. Oblong gray shapes labeled Electron appear on the second and third concentric circles.
What happens when the electron moves from the first energy level to the second energy level?
Energy is absorbed, and an emission line is produced.
Energy is released, and an emission line is produced.
Energy is absorbed by the atom.
Energy is lost from the atom.
Answer:
Energy is absorbed by the atom.
Explanation:
Calculate the percentage of all elements in Fel(OH)3
Please help, I will mark the answer with brainlist...
Answer: 30.06% is your answer.
I hope this helps.
Stay safe and have a good day :D
find the volume of the prism iready help me please
Answer:
The answer is 80!
Explanation:
A prism is a three dimensional solid object in which the two ends are identical. It is the combination of the flat faces, identical bases and equal cross sections. The volume of the prism is 819 cm³.
What is the volume of the prism?A prism is a polyhedron with two parallel congruent faces called the bases that are polygons. The volume of a three dimensional solid is the amount of space it occupies. The volume is measured in cubic units. The volume can be denoted in m³, cm³, ft³, etc.
The volume of a prism is the area of the base times the height. The equation used to calculate the volume is:
Volume = Base area × Height
Here the rectangle has 9cm length and 7cm width. Then the area is:
Area = 9 × 7 = 63 cm²
The height of prism = 13 cm
Then the volume is:
V = 63 × 13 = 819 cm³
Thus the volume of the prism is 819 cm³.
To know more about volume of prism, visit;
https://brainly.com/question/29273624
#SPJ3
Your question is incomplete most probably your full question was
What is volume of the rectangular prism with length 9cm, width 7cm and height 13 cm?
A 500ml bottle contains 2.50 moles of gas. What is the new volume when the number of miles is increased 5.00 moles?
Answer:
The new volume is 1,000ml
Explanation:
Mathematically, we know that the number of moles per ml(volume) should be constant irrespective of the increase.
Initially, we have a volume of 500 ml and number of moles of 2.5 moles
The ratio of the number of moles to the volume is 2.5/500 = 0.005 mole/ml
Now, this is expected to remain the same even if we have an increment.
let’s call the new volume x
0.005 mol/ml = 5 moles/x ml
x = 5/0.005 = 1,000 ml
And ironic bonds what happens to electrons? No
Answer:
metals donate electrons to nonsmetals
4. Why does ammonia, NH3, behave as a base when it reacts with an acid?
A It accepts a neutron and becomes NH3+.
B It accepts a proton and becomes NH4+.
OC It donates a proton and becomes NH2
B is the answer ,ammonium accepts a proton and becomes ammonium ion
In the movie bee movie how does the bee berry communicate
Answer:
they stick together as a group and that they berly fought or argue
Answer:first get a jar
Explanation:
Patrick that’s a jokers side special
Using a broom to clean sidewalks and driveways is a way to reduce water pollution.
Answer: Yes
Explanation:
Answer:
trueeeeee
Explanation: