Please help me easy question just get mixed up.

Answer:

Blank 1: Gasses

Blank 2: More

Blank 3: Solids

Blank 4: Fluids

Blank 5: Liquid

Blank 6: Gas

Blank 7: Higher

Blank 8: Lower

Blank 9: Sun

Blank 10: Radiation

Blank 11: Conductors

P.S. order of answers does not matter between Blank 5 and 6.

Answer:

[tex]36.44\ \text{kg m/s}\hat{i}[/tex]

Explanation:

I = Moment of inertia of sphere = [tex]\dfrac{2}{5}MR^2[/tex]

M = Mass of sphere = 29 kg

R = Radius of sphere = 0.5 m

T = Time taken for one revolution = 0.5 s

[tex]\omega[/tex] = Angular velocity = [tex]\dfrac{2\pi}{T}[/tex]

[tex]L=I\omega\\\Rightarrow L=\dfrac{2}{5}MR^2\dfrac{2\pi}{T}\\\Rightarrow L=\dfrac{4MR^2\pi}{5T}\\\Rightarrow L=\dfrac{4\times 29\times 0.5^2\pi}{5\times 0.5}\\\Rightarrow L=36.44\ \text{kg m/s}[/tex]

The rotational angular momentum of the sphere is [tex]36.44\ \text{kg m/s}\hat{i}[/tex].

Answer:

C.

Explanation:

Answer:A

Explanation:ap3x

Answer:

the total magnetic force on the 2 sides of the wire is 0.30 N

Option a) 0.30 N is the correct answer

Explanation:

Given the data in the question;

both the sides of the right angled triangle is the same and the magnetic is in the plane of the  triangle and is perpendicular to the hypotenuse.

hence, angle between the magnetic field and both the sides of the triangle is 45 degrees.

∅ = 45°

I = 2.0 A

L = 15 cm = 0.15 m

B = 0.7 T

Total magnetic force on the 2 sides of the wire will be;

F = 2BILsin∅

we substitute

F = 2 × 0.7 × 2.0 × 0.15 × sin(45°)

F = 0.42 × 0.70710678

F = 0.2970 ≈ 0.30 N

Therefore, the total magnetic force on the 2 sides of the wire is 0.30 N

Option a) 0.30 N is the correct answer

Answer:

13.6 N

Explanation:

Since one side of the wedge is vertical and the wedge makes and angle of 33 with the horizontal, the angle between the weight of the copper block on the incline and the incline is thus 90 - 33 = 57.

Let M be the mass of the block that hangs, m be the mass of the block on the incline and T be the tension in the weightless unstretchable cord.

We assume the motion is downwards in the direction of the hanging block, M.

We now write equations of motion for each block.

So

Mg - T = Ma    (1) and T - mgcos57 - F = ma where F is the frictional force on the block on the incline and a is their acceleration.

Now, since both blocks do not move, a = 0.

So, Mg - T = M(0) = 0     and T - mgcos57 - F = m(0) = 0

Mg - T = 0    (3) and T - mgcos57 - F = 0 (4)

From (3), T = Mg

Substituting T into (4), we have

T - mgcos57 - F = 0

Mg - mgcos57 - F = 0

So, Mg - mgcos57 = F  

F = Mg - mgcos57

F = (M - mcos57)g

Since g = acceleration due to gravity = 9.8 m/s², and M = 2.94 kg and m = 2.85 kg.

We find F, thus

F = (2.94 kg - 2.85 kgcos57)9.8 m/s²

F = (2.94 kg - 2.85 kg × 0.5446)9.8 m/s²

F = (2.94 kg - 1.552 kg)9.8 m/s²

F = (1.388 kg)9.8 m/s²

F = 13.6024 kgm/s²

F ≅ 13.6 N

Answer:

The equation of motion is [tex]x(t)=-[/tex][tex]\frac{1}{3} cos4\sqrt{6t}[/tex]

Explanation:

Lets calculate

The weight attached to the spring is 24 pounds

Acceleration due to gravity is [tex]32ft/s^2[/tex]

Assume x , is spring stretched length is ,4 inches

Converting the length inches into feet [tex]x=\frac{4}{12} =\frac{1}{3}feet[/tex]

The weight (W=mg) is balanced by restoring force ks at equilibrium position

mg=kx

[tex]W=kx[/tex] ⇒ [tex]k=\frac{W}{x}[/tex]

The spring constant , [tex]k=\frac{24}{1/3}[/tex]

                            = 72

If the mass is displaced from its equilibrium position by an amount x, then the differential equation is

    [tex]m\frac{d^2x}{dt} +kx=0[/tex]

    [tex]\frac{3}{4} \frac{d^2x}{dt} +72x=0[/tex]

  [tex]\frac{d^2x}{dt} +96x=0[/tex]

Auxiliary equation is, [tex]m^2+96=0[/tex]

                                 [tex]m=\sqrt{-96}[/tex]

                               =[tex]\frac{+}{} i4\sqrt{6}[/tex]

Thus , the solution is [tex]x(t)=c_1cos4\sqrt{6t}+c_2sin4\sqrt{6t}[/tex]

                                 [tex]x'(t)=-4\sqrt{6c_1} sin4\sqrt{6t}+c_2[/tex]  [tex]4\sqrt{6}[/tex] [tex]cos4\sqrt{6t}[/tex]

The mass is released from the rest x'(0) = 0

                    [tex]=-4\sqrt{6c_1} sin4\sqrt{6(0)}+c_2[/tex] [tex]4\sqrt{6}[/tex] [tex]cos4\sqrt{6(0)}[/tex] =0

                                                    [tex]c_2[/tex] [tex]4\sqrt{6} =0[/tex]

                                     [tex]c_2=0[/tex]

Therefore , [tex]x(t)=c_1[/tex] [tex]cos 4\sqrt{6t}[/tex]

Since , the mass is released from the rest from 4 inches

                    [tex]x(0)= -4[/tex] inches

[tex]c_1 cos 4\sqrt{6(0)} =-\frac{4}{12}[/tex] feet

   [tex]c_1=-\frac{1}{3}[/tex] feet

Therefore , the equation of motion is  [tex]-\frac{1}{3} cos4\sqrt{6t}[/tex]

Answer:

not enought info

Explanation:

tbh I just know it's not 5 10 or 1

Answer:

B. 5 A

Explanation:

10/2= 5

Educere

Answer: After fusing helium in its core to carbon, the Sun will begin to collapse again, evolving into a compact white dwarf star after ejecting its outer atmosphere as a planetary nebula. The predicted final mass is 54.1% of the present value, most likely consisting primarily of carbon and oxygen.

Answer: the Sun will begin to collapse

Explanation: "After fusing helium in its core to carbon, the Sun will begin to collapse again, evolving into a compact white dwarf star after ejecting its outer atmosphere as a planetary nebula. The predicted final mass is 54.1% of the present value, most likely consisting primarily of carbon and oxygen."

No, because some scientist are bad and they must have a scientific attitude like honesty, curiosity, open-mindedness, optimistic and more. And they should follow others sometimes because for their own good.

Answer:

No

Explanation:

Science operates in the context of national and international laws, agreements and conventions. It requires scientists to conduct and communicate scientific work for the benefit of society, with excellence, integrity, respect, fairness, trustworthiness, clarity, and transparency.

Answer:

Explanation:

Moment of inertia I = M k² , where M is mass and k is radius of gyration .

Putting the given values in the equation

5000 = 200 x k²

k² = 25

k = 5 cm .

Radius of gyration is 5 cm .

Answer:

The photosphere is the visible "surface" of the sun. So your answer would be C.

Explanation: its right

Answer:

a.

Explanation:

there would be a new planet is our solar system which could cause different gravitation pull on all the planets also there could be possible be new life form or other valuable metals that haven't been discovered on this planet. hope this helps somewhat

Answer: 2.67

Explanation: it said he went from 0 to 8 in 3 seconds so if we divide eight By three we get 2.67 rounded to the nearest hundredth so you accelerated that 2.67 m/s

Answer:

W = 1/2 K x^2

x^2 = 2 * W / K = 2 * 49 J / (N/m)  = .218 / m^2

x =  .467 m

Answer:

sorry I am not confident you the answer

Answer:

como  ías

Explanation:

Answer:

kilogram

In the International System of Units (SI), the kilogram is the basic unit of mass, and the newton is the basic unit of force. The non-SI kilogram-force is also a unit of force typically used in the measure of weight.

Answer:

v = 248.8 m/s

Explanation:

Given that,

Charge, q = [tex]6.47\ \mu C[/tex]

Electric field, E = 1300 N/C

Magnetic field, B =1.33 T

The force acting on the particle, [tex]F=6.27\times 10^{-3}\ N[/tex]

We need to find the magnitude of the particle's velocity. The net force on the particle is given by :

[tex]F=qE+qvB\\\\6.27\times 10^{-3}=6.47\times 10^{-6}\times 1300+6.47\times 10^{-6}\times 1.33v\\\\6.27\times 10^{-3}-6.47\times 10^{-6}\times 1300=6.47\times 10^{-6}\times 1.33v\\\\-0.002141=6.47\times 10^{-6}\times 1.33v\\\\v=\dfrac{0.002141}{6.47\times 10^{-6}\times 1.33}\\\\v=248.8\ m/s[/tex]

So, the magnitude of the particle's velocity is 248.8 m/s.

Answer: 0.516 ft/s

Explanation:

Given

Length of ladder L=20 ft

The speed at which the ladder moving away is v=2 ft/s

after 1 sec, the ladder is 5 ft away from the wall

So, the other end of the ladder is at

[tex]\Rightarrow y=\sqrt{20^2-5^2}=19.36\ ft[/tex]

Also, at any instant t

[tex]\Rightarrow l^2=x^2+y^2[/tex]

differentiate w.r.t.

[tex]\Rightarrow 0=2xv+2yv_y\\\\\Rightarrow v_y=-\dfrac{x}{y}\times v\\\\\Rightarrow v_y=-\dfrac{5}{19.36}\times 2=0.516\ ft/s[/tex]

Answer:

because they are found freely in nature uncombined so they are highly reactive with other elements

Answer:

Answer: Oxygen

Explanation:

Oxygen would not be considered as a pollutant

Answer:

Hey there the answer is C. Oxygen

Explanation:

Oxygen is the chemical element with the symbol O and atomic number 8. It is a member of the chalcogen group in the periodic table, a highly reactive nonmetal, and an oxidizing agent that readily forms oxides with most elements as well as with other compounds. After hydrogen and helium, oxygen is the third-most abundant element in the universe by mass. At standard temperature and pressure, two atoms of the element bind to form dioxygen, a colorless and odorless diatomic gas with the formula O 2. Diatomic oxygen gas constitutes 20.95% of the Earth's atmosphere. Oxygen makes up almost half of the Earth's crust in the form of oxides. Hope this helps! Have a great day!

Answer:

The second bulb will have thicker filament

Explanation:

Given;

First electric bulb: Power, P₁ = 100 W and Voltage, V₁ = 220 V

Second electric bulb: Power, P₂ = 200 W and Voltage, V₂ = 200 V

Resistivity of tungsten, ρ = 4.9 x 10⁻⁸ ohm. m

Resistance of the first bulb:

[tex]P = IV = \frac{V}{R} .V = \frac{V^2}{R} \\\\R = \frac{V^2}{P} \\\\R_1 = \frac{V_1^2}{P_1} = \frac{(220)^2}{100} = 484 \ ohms[/tex]

Resistance of the second bulb:

[tex]R_2 = \frac{V_2^2}{P_2} = \frac{(200)^2}{200} = 200 \ ohms[/tex]

Resistivity of the tungsten filament is given by the following equation;

[tex]\rho = \frac{RA}{L}[/tex]

where;

L is the length of the filament

R is resistance of each filament

A is area of each filament

[tex]A = \pi r^2[/tex]

where;

r is the thickness of each filament

[tex]\rho = \frac{R (\pi r^2)}{L} \\\\\frac{\rho L}{\pi} = Rr^2 \\\\Recall ,\ \frac{\rho L}{\pi} \ is \ constant \ for \ both \ filaments\\\\R_1r_1^2 = R_2r_2^2\\\\(\frac{r_1}{r_2} )^2 = \frac{R_2}{R_1} \\\\\frac{r_1}{r_2} = \sqrt{\frac{R_2}{R_1} } \\\\\frac{r_1}{r_2} = \sqrt{\frac{200}{484} } \\\\\frac{r_1}{r_2} = 0.64\\\\r_1 = 0.64 \ r_2\\\\r_2 = 1.56 \ r_1[/tex]

Therefore, the second bulb will have thicker filament