Which balanced equation represents an oxidation-reduction reaction?

Answer:

X= -Y + 2/2     Y=-X + 3/2

Explanation:

I don't know how to simplify it anymore. You would get x=-y+3/2 and y=-x+3/2

Answer:

Explanation:

(-1/2,1)

Answer:

See the answer below

Explanation:

Aqueous solution of copper II nitrate contains solute of copper II nitrate dissolved in water. The equation for the reaction is as below:

[tex]Cu(NO_3)_2 (s)[/tex] + [tex]H_2O (l)[/tex] --> [tex]Cu(NO_3)_2 (aq)[/tex]

Hence, the solute chemical is copper II nitrate while the solvent is water.

Chemical formula of copper II nitrate - [tex]Cu(NO_3)_2[/tex]

Chemical formula of water - [tex]H_2O[/tex]

Answer:

yh you are correct. the pattern is correct! :)

Answer:

Yep! :)

Explanation:

Answer:

3.34x10¹⁶ molecules of aspirin are in a drop of blood

Explanation:

The recomended dose of aspirin in blood is 100.0μg/mL =

1x10⁻⁴g aspirin / mL of blood.

In a drop (0.100mL) there are:

0.100mL ₓ (1x10⁻⁴g aspirin / mL of blood) = 1x10⁻⁵g aspirin.

Molecular mass of aspirin is:

9C = 12.01g/mol ₓ 9 = 108.09g/mol

8H = 1.01g/mol ₓ 8 = 8.08g/mol

4O = 16g/mol ₓ 4 = 64g/mol

108.09 + 8.08 + 64 = 180.17g/mol

Thus, moles of aspirin in 1x10⁻⁵g are:

1x10⁻⁵g ₓ (1mol / 180.17g) = 5.55x10⁻⁸ moles of aspirin

In 1 mole, you have 6.022x10²³ molecules, thus:

5.55x10⁻⁸ moles of aspirin ₓ (6.022x10²³ molecules / 1 mole ) =

Answer: SI prefixes are used to form decimal multiples and submultiples of SI units. They should be used to avoid very large or very small numeric values.

Explanation: ^^^

What Connie could have used to detect when the chemical reaction was complete is an: acid-base indicator.

A chemical reaction is a chemical process that involves the continuous rearrangement (transformation) of either the ionic, atomic or molecular structure of a chemical element through the breakdown and formation of chemical bonds, in order to produce a chemical compound.

When a strong acid such as Hydrogen chloride (HCl) react with a strong alkali such as Sodium hydroxide (NaOH), it gives rise to the formation of Sodium chloride (NaCl) and Water ([tex]H_2O[/tex]);

                       [tex]HCl + NaOH[/tex] ----> [tex]NaCl + H_2O[/tex]

The progress of the above chemical reaction can be followed by using a pH sensor and the final pH of a strong acid and strong base is seven (7), meaning it is neutral.

However, Connie could make use of an acid-base indicator to detect when the chemical reaction is complete.

An acid-base indicator can be defined as a chemical substance that changes color with respect to the pH (hydrogen ion concentration) of a solution or chemical reaction. Some examples of an acid-base indicator are:

In conclusion, an acid-base indicator is typically used for detecting when a chemical reaction between an acid and an alkali is complete.

Read more here: https://brainly.com/question/16284171

Answer:When a strong acid such as Hydrogen chloride (HCl) react with a strong alkali such as Sodium hydroxide (NaOH), it gives rise to the formation of Sodium chloride (NaCl) and Water ();

---->

Explanation:

Answer: 1.29 moles of ethylene glycol must be added to 1 kg of water to make a solution with a freezing point of -2.4°C. Molality of solution is 1.29 m.

Explanation:

Depression in freezing point is given by:

[tex]\Delta T_f=i\times K_f\times m[/tex]

[tex]\Delta T_f=T_f^0-T_f=(0-(-2.4))^0C=2.4^0C[/tex] = Depression in freezing point

i= vant hoff factor (for non electrolyte , i = 1)

[tex]K_f[/tex] = freezing point constant for water= [tex]1.86^0C/kgmol[/tex]

m= molality =[tex]\frac{\text{moles of solute}}{\text{weight of solvent in kg}}[/tex]

m= molality =[tex]\frac{x}{1kg}[/tex]

[tex]2.4^0C=1\times 1.86^0C/kgmol\times \frac{x}{1kg}[/tex]

[tex]x=1.29[/tex]

Molality = [tex]\frac{\text{moles of solute}}{\text {weight of solvent in kg}}=\frac{1.29mol}{1kg}=1.29m[/tex]

Thus 1.29 moles of ethylene glycol must be added to 1 kg of water to make a solution with a freezing point of -2.4°C. Molality of solution is 1.29 m.

Answer:

1) C (m=T f/Kf)

2) 2.4 C

3) 1.3 m

4) 1.3 moles

Explanation:

This is correct on ed

Answer:

23.6°C

Explanation:

Step 1:

Data obtained from the question. This include the following:

Mass = 0.125kg = 0.125 x 1000 = 125g

Initial temperature (T1) = 22°C

Heat (Q) generated in 4.5mins = 835J

Specific heat capacity (C) of water = 4.184J/g°C

Change in temperature (ΔT) =?

Final temperature (T2) =?

Step 2:

Determination of the change in temperature, ΔT of water.

This can be obtained as shown below:

Q = MCΔT

835 = 125 x 4.184 x ΔT

Divide both side by 125 x 4.184

ΔT = 835 / (125 x 4.184)

ΔT = 1.6°C

Therefore, the change in temperature, ΔT is 1.6°C

Step 3:

Determination of the final temperature of water.

This can be obtained as follow:

Initial temperature (T1) = 22°C

Change in temperature (ΔT) = 1.6°C

Final temperature (T2) =?

Change in temperature (ΔT) = Initial temperature – Final temperature

ΔT = T2 – T1

1.6 = T2 – 22

Collect like terms

T2 = 1.6 + 22

T2 = 23.6°C

Therefore, the final temperature of the water is 23.6°C.

C.heat the solution

Answer:

(a) Formation of the carbocation is the rate-determining step (RDS)

(c) Reactions at chiral carbons proceed with inversion of stereochemistry

Explanation:

SN1 reactions arenucleophilic substitution reactions in which the rate determining step is unimolecular.

The formation of a carbocation is the rate determining step. This depends on the electrophilicity of the leaving group. Thus the SN1 reaction mechanisms is dependent on the electrophile and not the nucleophile.

Polar and acidic solvents which can assist in the formation of the carbocation speeds up the rate determining step.

If the formation of carbocation occurs at a chiral center, both retention and inversion of stereochemistry are likely to occur.

Therefore, the correct options are A and C.

Answer:

The answer is 60W

Power = Work done/ time

time = 1 second

Work done = 60J

Power = 60/1

= 60W

Hope this helps.

Answer:

Explanation:

Pv = n RT

P =7.65, T= 310K, for glucose n = moles= weight/molar mass= weight/180, R is gas constant

7.65* V =W/180 *0.0821 * 310

w/v= 7.65*180/0.0821*310 = 1377/25.45 = 54.10 =5.4%

Gases, liquids and solids are all made up of atoms, molecules, and/or ions, but the way the particles inside them differ.

In a gas, the molecules are spread wide apart and moves freely at high speeds

In a liquid, the more closer to each other and will vibrate or slip past each other

In a solid, the molecules are tightly packed, making no room for each other and harder to move. These molecules vibrate and jiggle but, don't move

Answer:

they should have a number that can completely transfer and fill the other atom

Explanation:

example:

sodium(2.8.1)and Chlorine(2.8.7)the sodium will give chlorine the 1 valence electrobo so they both become stable(2.8)±and(2.8.8)–

magnesium(2.8.2)and oxygen(2.6)same way as above to abtain mg(2.8)±²and oxygen(2.8)–²

Answer:

D. Thermal conduction is blocked by the flip-flops.

Explanation:

Convection is a process of heat transfer which involves fluids( liquid or gas). This however rules convection out of the answer.

Radiation involves heat transfer from the sun to bodies on earth.

Conduction involves heat transfer between two solid bodies. Hot beach sand and flip-flops are solid bodies which validates thermal(heat) conduction.

Answer:

0.25moles

Explanation:

There are 1000[tex]cm^{3}[/tex] for 1[tex]dm^{3}[/tex]

Therefore in 1000[tex]cm^{3}[/tex] of 0.5 mol/[tex]dm^{3}[/tex] solution has = 0.5 moles

Therefore 500[tex]cm^{3}[/tex] contains = 0.5/1000 x 500 = 0.25moles

The number of moles of sulfuric acid in 0.5 mol/dm³ solution is equal to 0.25 mol.

The concentration of the solution can be determined as the number of moles of a solute in per unit volume of a solution is known as molarity or molar concentration.

The Molarity of the solution is calculated in the following formula:

Molarity (M) = Moles (n)/Volume of the Solution (in L)

Now if we have to find the number of moles of solute in the solution, the formula becomes:

Number of moles of solute (n) = Molarity (M) × Volume of the Solution

Given, the concentration of the sulfuric acid solution = 0.5 mol/dm³

The volume of the solution, V = 500 cm³

As we know, 1 dm³ = 10³ cm³, the volume of solution = 0.5 dm³

The number of moles of the sulfuric acid = M × V

= 0.5 × 0.5 = 0.25 mol

Therefore, 0.25 moles of sulfuric acid in 500cm3 of a 0.5mol/dm³ solution of sulfuric acid.

Learn more about molarity, here:
https://brainly.com/question/8732513

#SPJ2

A chemical  reaction involves the interaction of reactants. The substance X ,must be an acid and in this case is CH3COOH

In chemistry, a reaction is said to occur when substances interact in such a way that other new substances are formed.

Now let us look at the particular reaction; NaOH + X ----> NaCH3COO + H2O. The substance X must be an acid. Hence, the most likely susbstance is CH3COOH.

Learn more about reaction: https://brainly.com/question/22817140

12,194 L is the answer!

Explanation:

Water has the maximum density at the temperature of 4°Celsius. So, it expands at temperatures higher or lower than 4°C, knowing that at the temperature of -25°C the water can't have a lower volume than the one at 15°C.

Answer:

12, 194 L

That's your answer!!!

Answer:

F

Explanation:

"The mass of the products is equal to the mass of the reactants" is true about the principle of the conservation of mass.

So, option f is correct one.

To learn more about conservation of mass here.

https://brainly.com/question/13383562

#SPJ3

Answer:

El potencial celular estándar, [tex]E_{cell}[/tex] is +0.46 V

Explanation:

Las reacciones de media célula son;

Media reacción del ánodo Cu²⁺ + 2e⁻ ↔ Cu, E ° = 0.34 V

Media reacción catódica 2Ag + 2e⁻ ⁻ 2Ag, E ° = 0.80 V

Sin embargo tenemos para hierro Fe²⁺ + 2e⁻ ↔ Fe, E ° -0.44 V

y Fe³⁺ + e⁻ ↔ Fe²⁺, E ° = 0.77 V

 que es más alta que la del cobre presente, por lo tanto, el cobre se oxidará en el ánodo

Por lo tanto, en el ánodo, tendremos

Cu → Cu²⁺ + 2e⁻ (E ° = -0.34 V)

En el cátodo

2Ag + 2e⁻ → 2Ag (E ° = 0.80 V)

[tex]E_{cell} = E_c + E_a = -0.34 + 0.8 = +0.46 \, V[/tex]

El potencial celular estándar, [tex]E_{cell}[/tex] = +0.46 V

Answer:

Visible wavelengths range from 0.0007 milimeters for red light, through orange, yellow, green, and blue, to 0.0004 milimeters for violet light.

Ultraviolet is shorter wavelengths than violet.

Hope This Helps.

Answer:

[tex]V=1.61L[/tex]

Explanation:

Hello,

In this case, the undergoing chemical reaction is:

[tex]Mg+2HCl\rightarrow MgCl_2+H_2[/tex]

Next, we compute the reacting moles of each reactants:

[tex]n_{Mg}=3.712gMg*\frac{1molMg}{24.305 gMg}=0.153molMg[/tex]

[tex]n_{HCl}=1.385\frac{molHCl}{L}*0.1042L=0.144molHCl[/tex]

Then, as magnesium and hydrohloric acid are in a 1:2 molar ratio 0.153 moles of magnesium will completely react with 0.306 moles of hydrochloric acid yet we only have 0.144 moles, therefore, limiting reactant is hydrochloric acid. Thus, we compute the produced moles of hydrogen:

[tex]n_{H_2}=0.144molHCl*\frac{1molH_2}{2molHCl} =0.072molH_2[/tex]

Finally, we use the ideal gas equation with T=298K and 1atm (STP conditions) to compute the liters of hydrogen gas:

[tex]PV=nRT\\\\V=\frac{nRT}{P}=\frac{0.072mol*0.082\frac{atm*L}{mol*K}*273K}{1atm}\\ \\V=1.61L[/tex]

Best regards.

Answer:

The answer is animals

Explanation:

Plants and fungi have a cell wall, and although most bacteria lack a cell wall, the question is asking in which kingdom do ALL organisms lack a cell wall. Hope this helps.

Answer:Bacteria

Explanation:

Answer:

Basis and basic​ are two different words.

In English, Basis is used as a noun while basic is used as an adjective. Basis term refers as the base or starting point of any discussion.

For example: Bread is a basic ingredient of cake.

                      On the basis of Mendel's hypothesis.

In chemistry, Basis set is used as a set of functions that represent the electronic wave function in the density-functional theory which forms an  algebraic equations that can be easily implemented on a computer.

While Basic term is used for substances that can accept a hydrogen ion (H+) from another substance and have pH above 7. such as sodium.

So, It is not important that both the terms, basis and basic change their English meaning if used in chemistry, they both can be used with English meaning in chemistry as well. Bases and basic,​ both the terms can be used as either English or Chemistry without affecting the meaning.

Answer: The boiling point of a 3.70 m solution of phenol in benzene is [tex]89.5^0C[/tex]

Explanation:

Elevation in boiling point:

[tex]\Delta T_b=i\times k_b\times m[/tex]

where,

[tex]\Delta T_b[/tex] = change in boiling point

i= vant hoff factor = 1 (for benzene which is a non electrolyte )

[tex]k_b[/tex] = boiling point constant = [tex]2.53^0C/kgmol[/tex]

m = molality = 3.70

[tex]T_{solution}-T_{solvent}=i\times k_b\times m[/tex]

[tex]T_{solution}-80.1^0C=1\times 2.53\times 3.70[/tex]

[tex]T_{solution}=89.5^0C[/tex]

Thus  the boiling point of a 3.70 m solution of phenol in benzene is [tex]89.5^0C[/tex]

Answer:

First Question:

C. ΔTb = Kbm

Second Question:

C. 9.36° C

Third Question:

89.5

Explanation:

Got it right.

Answer:

m = 17

Explanation:

From the question we were given that

Triangle WZY is bisected by ZX; ZW = ZY

∠YXZ = (6m – 12)°

Based on the characteristics of the triangle, we see that triangle WYZ is an isosceles triangle (that is, triangle WXZ is equal to triangle YXZ)

<YXZ = <WXZ = 90°

Using ∠YXZ  = (6m – 12)°

We have:

(6m – 12)° =  90°

6m = 90 + 12 ⇒ 6m = 102

m = 102 ÷ 6 = 17

m = 17

We therefore see that m is equal to 17

Answer:

B: 17

Explanation: