Which of the following is a conjugate acid-base pair in the reaction represented by the
equation below?
H2PO4 + H20 H3PO, + OH
H2PO, and H2O
b) H,PO, and OH
c) H2PO, and H3PO,
None of the above

Answer: Both Mike and Bobby are correct.

Explanation:

Petrifcation can be defined as the process in which the organic material of the dead living being becomes fossil by the replacement of mineral deposition in the bony, hard material.

Thus although the body components gets decomposed wiped out due to this process. The body shape of the dead organism remains the same as that was in living.

Thus the statements made by Mike and Bobby both are correct. The fossils are hard and have the same appearance as when they were alive.

Answer: The equation for the reaction that goes with this equilibrium constant is [tex]5.56\times 10^{-10}=\frac{[CH_3COOH]}{[CH_3COO^-]\times [H^+]}[/tex]

Explanation:

[tex]CH_3COOH\rightarrow CH_3COO^-+H^+[/tex]

Here [tex]CH_3COOH[/tex] donates a proton and thus behaves as an acid and forms [tex]CH_3COO^-[/tex] which is called as the conjugate base of [tex]CH_3COOH[/tex]

The dissociation constant of acids is given by the term [tex]K_a[/tex] and the dissociation constant of bases is given by the term [tex]K_b[/tex] and is defined as the ratio of concentration of products to the concentration of reactants each raised to the power their stoichiometric ratios.

[tex]K_a[/tex] for  [tex]CH_3COOH[/tex] :

[tex]K_a=\frac{[CH_3COO^-]\times [H^+]}{[CH_3COOH]}[/tex]

[tex]CH_3COO^-+H^+\rightarrow CH_3COOH[/tex]

[tex]K_b=\frac{[CH_3COOH]}{[CH_3COO^-]\times [H^+]}[/tex]

[tex]5.56\times 10^{-10}=\frac{[CH_3COOH]}{[CH_3COO^-]\times [H^+]}[/tex]

The equation for the reaction that goes with this equilibrium constant is [tex]K_b=\frac{[CH_3COOH]}{[CH_3COO^-]\times [H^+]}[/tex]

Answer:

C6H6<C7H15OH<C6H13OH<C2H5OH​

Explanation:

Organic substances are ordinarily nonpolar. This means that they do not dissolve in water. However, certain homologous series of organic compounds actually dissolve in water because they possess certain functional groups that effectively interact with water via hydrogen bonding.

A typical example of this is alcohol family. All members of this homologous series contain the -OH functional group. This group can effectively interact with water via hydrogen bonding, leading to the dissolution of low molecular weight alcohols in water.

Low molecular weight alcohols are miscible with water in all proportions. This implies that they are highly soluble in water. However, as the size of the alkyl moiety in the alcohol increases, the solubility of the alcohol in water decreases due to less effective interaction of the -OH group with water via hydrogen bonding. This explains the fact that C2H5OH​ is the most soluble alcohol in the list.

C6H6 is insoluble in water since it is purely a hydrocarbon with no -OH group capable of interaction with water via hydrogen bonding.

Answer:

4.07x10⁻³M AlCl₃.

Explanation:

Based on the reaction:

AlCl₃(aq) + 3 AgNO₃(aq) → 3 AgCl(s) + Al(NO₃)₃(aq)

That means 1 mole of AlCl₃ reacts with 3 moles of AgNO₃ to produce 3 moles of AgCl.

As 0.325g of AgCl are produced. Moles of AgCl are (Molar mass AgCl: 143.32g/mol):

0.325g AgCl ₓ ( 1 mol / 143.32g) = 2.27x10⁻³ moles of AgCl

As 3 moles of AgCl are produced from 1 mole of AlCl₃, moles of AlCl₃ that produce 2.27x10⁻³ moles of AgCl are:

2.27x10⁻³ moles of AgCl ₓ (1 mole AlCl₃ / 3 moles AgCl) =

7.56x10⁻⁴ moles AlCl₃

As volume of the AlCl₃ solution that reacts is 185.5mL = 0.1855L, molar concentration of the solution is:

7.56x10⁻⁴ moles AlCl₃ / 0.1855L =

Answer:

1. PEP is a feedback inhibitor of phosphofructokinase.

4. PEP inhibition of phosphofructokinase yields a sigmoidal velocity versus substrate curve.

6. The binding of PEP to one phosphofructokinase subunit causes a conformation change that affects the ability of the substrate to bind to the other subunits.

Explanation:

Phosphofructokinase-1, PFK-1, is an allosteric enzymes composed of four protein subunits.

Allosteric enzymes are enzymes that function through non-covalent binding of allosteric modulators which may be activators or inhibitors. They produce a characteristic velocity versus substrate sigmoidal curve. PFK-1 has a separate binding site for its substrate, fructose-6-phosphate and it's allosteric modulators: ATP, ADP or phosphoenolpyruvate, PEP.

The enzyme can exist in two conformations, the T-state (tense) or the R-state (resting). Binding of substrate causes a conformational change from T-state to R-state, whereas binding of allosteric inhibitors returns it to the T-state.

PEP, the product of step 9 in glycolysis, is an allosteric inhibitor of PFK-1. When it binds to the the allosteric site, it leads to conformational changes in PFK-1 from the R-state to the T-state which reduces the enzymes ability to bind the substrate. These changes are responsible for the sigmoidal velocity/substrate curve in allosteric enzymes.

Therefore, the true statements from the options above are 1, 4, 6.

Options 2,3 and 5 are wrong because PEP is a negative effector of PFK-1, thus its binding reduces the affinity of PFK-1 for its substrate. Also, PFK-1 being an allosteric enzyme has separate binding sites for its substrate and its modulators. Thus, there is no competition for active site binding by substrate and modulators.

Answer:

gravitational and quantum ARE NOT, but electric and magnetic ARE.    there is a similar question to this but it's the exact opposite, so don't get confused

Answer:

$0.0238

Explanation:

The energy you need to increase the temperature of water from 20°C to 100°C is obtained from:

Q = C×m×ΔT

Where Q is the energy, C is specific heat of water (4.184J/g°C), m is mass of water (2.00x10²g - Density of water 1g/mL), ΔT is change in temperature (100.0°C - 20.0°C)

Replacing:

Q = 4.184J/g°C × 2.00x10²g × 80.0°C

Q = 66944J = 66.944kJ

As you are assuming the energy of combustion will be just 50.0% to heat the water the energy you need is 66.944kJ × 2 = 133.888kJ

The combustion of methane is:

CH4(g) + 2O2(g) ⟶ CO2(g) + 2H2O(l) ΔH = −890.8kJ

That means 1 mole of methane produce 890.8kJ. As you need 133.888kJ, moles of methane are:

133.888kJ × (1 mol CH₄ / 890.8kJ) = 0.150 moles of CH₄.

Using PV = nRT, moles of 15.0ft³ (424.8L) at 20.0°C (293.15K) and 1.00atm:

1.00atmₓ424.8L = moles CH₄ₓ0.082atmL/molKₓ293.15K

17.67 = moles CH₄

As 17.67 moles of CH₄ cost $2.80, the cost of 0.150 moles of CH₄ is:

0.150 moles CH₄ ₓ ($2.80 / 17.67 moles) =

Answer:

0.134 moles of H₂ can be formed if a 3.25g sample of Mg reacts with excess HCl

Explanation:

The balanced reaction is:

Mg + 2 HCl → MgCl₂ + H₂

By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles react:

Being:

the molar mass of the compounds participating in the reaction is:

Then, by stoichiometry of the reaction, the following quantities of mass participate in the reaction:

Then you can apply the following rule of three: if by stoichiometry 24.31 grams of Mg form 1 mole of H₂, 3.25 grams of Mg how many moles of H₂ will they form?

[tex]moles of H_{2} =\frac{3.25 grams of Mg*1 mole of H_{2} }{24.31 grams of Mg}[/tex]

moles of H₂= 0.134

0.134 moles of H₂ can be formed if a 3.25g sample of Mg reacts with excess HCl

0.134 moles of H₂ are formed by the reaction of 3.25 g of Mg with excess HCl.

Let's consider the balanced equation between Mg and HCl.

Mg + 2 HCl ⇒ MgCl₂ + H₂

The molar mass of Mg is 24.3 g/mol. The moles corresponding to 3.25 g of Mg are:

[tex]3.25 g \times \frac{1mol}{24.3g} = 0.134 mol[/tex]

The molar ratio of Mg to H₂ is 1:1. The moles of H₂ formed by 0.134 moles of Mg are:

[tex]0.134 mol Mg \times \frac{1molH_2}{1molMg} = 0.134molH_2[/tex]

0.134 moles of H₂ are formed by the reaction of 3.25 g of Mg with excess HCl.

Learn more: https://brainly.com/question/9743981

Answer:

a. Put a piece of fresh sliced yam with a bore into it into the soup.

Explanation:

b. Osmosis may occur

The chef can put a slice of yam in the soup with a hole in it as it will absorb excess of salt by process of diffusion.

Diffusion is defined as the process of movement of molecules which takes place under concentration gradient. It helps in movement of substances in and out from the cell.The molecules move from lower concentration region to a higher concentration region till the concentration becomes equal.

There are 2 main types of diffusion:

1) simple diffusion-process in which substances move through a semi-permeable membrane without the aid of transport proteins.

2) facilitated diffusion- It is a passive movement of molecules across cell membrane from higher concentration region to lower concentration.

There are 2 types of facilitated diffusion one is osmosis and dialysis.

Learn more about diffusion,here:

https://brainly.com/question/14852229

#SPJ2

Answer:

C3H6.

Explanation:

Data obtained from the question:

Mass of the compound = 8g

Mass of CO2 = 24.01g

Mass of H2O = 13.10g

Next, we shall determine the mass of C, H and O present in the compound. This is illustrated below:

Molar Mass of CO2 = 12 + (2x16) = 44g/mol

Molar Mass of H2O = (2x1) + 16 = 18g/mol

Mass of C in compound = Mass of C/Molar Mass of CO2 x 24.01

=> 12/44 x 24.01 = 6.5g

Mass of H in the compound = Mass of H/Molar Mass of H2O x 13.1

=> 2x1/18 x 13.1 = 1.5g

Mass of O in the compound = Mass of compound – (mass of C + Mass of H)

=> 8 – (6.5 + 1.5) = 0

Next, we shall determine the empirical formula of the compound. This is illustrated below:

C = 6.5g

H = 1.

Divide by their molar mass

C = 6.5/12 = 0.54

H = 1.4/1 = 1.

Divide by the smallest

C = 0.54/0.54 = 1

H = 1/0.54 = 2

Therefore, the empirical formula is CH2

Finally, we shall determine the molecular formula as follow:

The molecular formula of a compound is a multiple of the empirical formula.

Molecular formula = [CH2]n

[CH2]n = 44

[12 + (2x1)]n = 44

14n = 44

Divide both side by 14

n = 44/14

n = 3

Molecular formula = [CH2]n = [CH2]3 = C3H6

Therefore, the molecular formula of the compound is C3H6

Answer:

A. 1.54 mole.

B. 55.39g of carbon

Explanation:

A. Determination of the number of mole in 67.7g of C3H8.

Mass of C3H8 = 67.7g

Molar mass of C3H8 = (3x12) + (8x1) = 44g/mol

Number of mole of C3H8 =..?

Number of mole = Mass/Molar Mass

Number of mole of C3H8 = 67.7/44

Number of mole of C3H8 = 1.54 mole

B. Determination of the mass of carbon in the compound.

This is illustrated below:

The mass of C in compound can be obtained as follow:

=> 3C/C3H8 x 67. 7

=> 3x12 / 44 x 67.7

=> 36/44 x 67.7

=> 55.39g

Therefore, 55.39g of carbon is present in the compound.

Answer:

1. In order to reach equilibrium COCl₂(g) must be consumed.

B. False

2. In order to reach equilibrium Kc must increase.

B. False .

3. In order to reach equilibrium CO must be consumed.

A. True.

4. Qc is greater than Kc.

A. True

5. The reaction is at equilibrium. No further reaction will occur.

B. False.

Explanation:

Based on the reaction:

COCl₂(g) → CO (g) + Cl₂(g)

And Kc is defined as:

Kc = 1.29x10⁻² = [CO] [Cl₂] / [COCl₂]

Molar concentrations of each species are:

[COCl₂] = 0.104 moles of COCl₂ / 1L = 0.104M

[CO] = 4.66×10⁻² moles of CO / 1L = 4.66×10⁻²M

[Cl₂] = 3.76×10⁻² moles of Cl₂ / 1L = 3.76×10⁻²M

Replacing in Kc formula:

4.66×10⁻²M × 3.76×10⁻²M / 0.104M = 1.68x10⁻²

As the concentrations are not in equilibrium, 1.68x10⁻² is defined as the reaction quotient, Qc.

As Qc > Kc, the reaction will shift to the left producing more COCl₂ and consuming CO and Cl₂. Thus

1. In order to reach equilibrium COCl₂(g) must be consumed.

B. False

2. In order to reach equilibrium Kc must increase.

B. False . Kc is a constant that never change.

3. In order to reach equilibrium CO must be consumed.

A. True.

4. Qc is greater than Kc.

A. True

5. The reaction is at equilibrium. No further reaction will occur.

B. False. The reaction is in equilibrium when Qc = Kc

Answer:

Number of proton emmitted by laser=[tex]2.48*10^17proton[/tex]

Explanation:

Energy is the ability to cause change; power is directly proportional to energy and its the rate energy is utilized.

Power=energy/time.

First we need to calculate the total energy used which is equal to the total power utilized.

E(total)= P( total) = 1.4W × 0.070 s =[tex]0.098J[/tex]

CHECK THE ATTACHMENT FOR THE REMAINING DETAILED CALCULATION

Answer:

Some of the methods in Methods in electrochemistry that can be used for the separation of proteins and enzymes are as follows:

Redox transformations: In this method enzymes or proteins would be adsorbed on the electrode surface and facilitates direct electron transfer that causes denaturation and loss of their electrochemical activities and bioactivities. It is widely used in biosensors and biofuel cells.

Protein electrophoresis: In this process proteins are seperated by placing them in a gel matrix in the presence of an electrical field. In this method a negative charge is applied so that proteins move towards a positive charge.

Answer:

The system is not in equilibrium and the reaction must run in the forward direction to reach equilibrium.

Explanation:

The reaction quotient Qc is a measure of the relative amount of products and reagents present in a reaction at any given time, which is calculated in a reaction that may not yet have reached equilibrium.

For the reversible reaction aA + bB⇔ cC + dD, where a, b, c and d are the stoichiometric coefficients of the balanced equation, Qc is calculated by:

[tex]Qc=\frac{[C]^{c}*[D]^{d} } {[A]^{a}*[B]^{b}}[/tex]

In this case:

[tex]Qc=\frac{[H_{2} ]*[I_{2} ] } {[HI]^{2}}[/tex]

Since molarity is the concentration of a solution expressed in the number of moles dissolved per liter of solution, you have:

So,

[tex]Qc=\frac{2.09*10^{-2} *4.14*10^{-2} } {0.280^{2} }[/tex]

Qc= 0.011

Comparing Qc with Kc allows to find out the status and evolution of the system:

If the reaction quotient is equal to the equilibrium constant, Qc = Kc, the system has reached chemical equilibrium.

If the reaction quotient is greater than the equilibrium constant, Qc> Kc, the system is not in equilibrium. In this case the direct reaction predominates and there will be more product present than what is obtained at equilibrium. Therefore, this product is used to promote the reverse reaction and reach equilibrium. The system will then evolve to the left to increase the reagent concentration.

If the reaction quotient is less than the equilibrium constant, Qc <Kc, the system is not in equilibrium. The concentration of the reagents is higher than it would be at equilibrium, so the direct reaction predominates. Thus, the system will evolve to the right to increase the concentration of products.

Being Qc=0.011 and Kc=1.80⁻²=0.018, then Qc<Kc. The system is not in equilibrium and the reaction must run in the forward direction to reach equilibrium.

Answer:

The molarity is 0.359[tex]\frac{moles}{L}[/tex]

The molality is 0.354 [tex]\frac{moles}{kg}[/tex]

The mass percent of the solution es 3.45%

Explanation:

Molarity is a unit of concentration that indicates the amount of moles of solute that appear dissolved in each liter of the mixture. It is determined by:

[tex]Molarity (M)=\frac{number of moles of solute}{volume}[/tex]

Being:

The molar mass of KNO₃ is:

KNO₃=  39 g/mole + 14 g/mole + 3*16 g/mole= 101 g/mole

You can apply the following rule of three: if 101 grams of KNO₃ are present in 1 mole, 72.5 grams in how many moles are present?

[tex]moles of KNO_{3}=\frac{72.5 grams*1 mole}{101 grams}[/tex]

moles of KNO₃= 0.718

So you have:

Applying this quantity in the definition of molarity:

[tex]molarity=\frac{0.718 moles}{2 L}[/tex]

Molarity= 0.359[tex]\frac{moles}{L}[/tex]

The molarity is 0.359[tex]\frac{moles}{L}[/tex]

Molality is a way of measuring the concentration of solute in solvent and indicates the amount of moles of solute in each kilogram of solvent.

Then the molality is calculated by:

[tex]Molality=\frac{moles of solute}{mass of solvent in kilograms}[/tex]

Density is defined as the property that matter, whether solid, liquid or gas, has to compress in a given space. That is, it is the amount of mass per unit volume. So, if the density of 1.05 g / mL for the solution indicates that in 1 mL of solution there are 1.05 grams of solution, in 2000 mL (where 2L = 2000 mL, because 1 L = 1000mL) how much mass is there?

[tex]mass=\frac{2000 mL*1.05 grams}{1 mL}[/tex]

mass= 2100 grams

Since mass solution = mass water + mass KNO₃

then mass water = mass solution - mass KNO₃

Being mass solution 2100 grams and mass KNO₃ 72.5 grams, and replacing you get: mass water= 2100 grams - 72.5 grams

mass water= 2,027.5 grams

Then, being:

Replacing in the definition of molality:

[tex]molality=\frac{0.718 moles}{2.0275 kg}[/tex]

molality= 0.354 [tex]\frac{moles}{kg}[/tex]

The molality is 0.354 [tex]\frac{moles}{kg}[/tex]

The mass percent of a solution is the number of grams of solute per 100 grams of solution. Then the mass percent is the mass of the element or solute divided by the mass of the compound or solute and the result of which is multiplied by 100 to give a percentage.

[tex]mass percent=\frac{mass of solute}{mass of solution} *100[/tex]

So, in this case:

[tex]mass percent=\frac{72.5 grams}{2100 grams} *100[/tex]

mass percent= 3.45 % KNO₃ by mass

The mass percent of the solution es 3.45%

The molarity of the solution is 0.36 mol/L. The molality of the solution is 0.34 m. The mass percent of the solution is   3.33%.

Number of moles of  KNO3 = mass/molar mass =  72.5 g/101 g/mol = 0.72 moles

Molarity = Number of moles / volume =  0.72 moles/ 2.00 L = 0.36 mol/L

The molality = Number of moles of solute/Mass of solution in kilograms

mass of solution =  1.05 g/mL × 2000 mL = 21000 g or 2.1Kg

Molality of solution =  0.72 moles/2.1 Kg = 0.34 m

Mass percent of solution = mass of solute/mass of solution × 100/1

Mass percent of solution =  72.5 g/ (72.5 g + 2100 g) × 100/1

= 3.33%

Lear more:https://brainly.com/question/11897796

Answer:

1188.976 mmHg

Explanation:

Initial pressure P1= 755 mmHg

Initial volume V1 = 6.00 litres

Final volume V2 = 3.81 litres

Final pressure P2= the unknown

Now applying Boyle's Law,we have;

P1V1 = P2V2

Since P2 is the unknown then it has to be made the subject of the formula.

P2=P1V1/ V2

P2= 755 × 6.00/ 3.81

P2= 1188.976 mmHg

Therefore, the new pressure is; 1188.976 mmHg

Answer:

Explanation:

The main objective here is to draw a diagram of an heterocyclic compound containing two C-N bonds in the structure. One with free rotation, as expected for a single bond, but the other C-N bond exhibits restricted rotation. After that ; we will identify the C-N bond with restricted rotation, and also justify our answer by drawing resonance structures.

So; the first image below shows the structure of the heterocyclic compound containing two C-N bonds in the structure with One with free rotation, as expected for a single bond, but the other C-N bond exhibits restricted rotation. From the first diagram. the squared area indicates the  C-N bond that exhibits restricted rotation.

The amide bonds in the C-N bonds offers the resonance characteristics and thus exhibits restricted rotation. The resonance is shown in the second image below

Answer:

In 0 group of the periodic table

Explanation:

So they will not react with other atoms because they have a full outer shell of electrons and an overall charge of 0.

Hope it helps.

Answer:

The mass is 1.4701 grams and the moles is 0.01.

Explanation:

Based on the given question, the volume of the solution is 100 ml or 0.1 L and the molarity of the solution is 0.100 M. The moles of the solute (in the given case calcium chloride dihydride (CaCl2. H2O) can be determined by using the formula,  

Molarity = moles of solute/volume of solution in liters

Now putting the values we get,  

0.100 = moles of solute/0.1000

Moles of solute = 0.100 * 0.1000

= 0.01 moles

The mass of CaCl2.2H2O can be determined by using the formula,  

Moles = mass/molar mass

The molar mass of CaCl2.2H2O is 147.01 gram per mole. Now putting the values we get,  

0.01 = mass / 147.01

Mass = 147.01 * 0.01

= 1.4701 grams.  

The mass should be considered as the 1.4701 grams and the moles should be 0.01.

Since we know that

Molarity = moles of solute/volume of solution in liters

So,

0.100 = moles of solute/0.1000

Moles of solute = 0.100 * 0.1000

= 0.01 moles

Now The mass should be

Moles = mass/molar mass

0.01 = mass / 147.01

Mass = 147.01 * 0.01

= 1.4701 grams.  

hence, The mass should be considered as the 1.4701 grams and the moles should be 0.01.

Learn more about moles here: https://brainly.com/question/24817060

Answer:

Gold(III) chloride

Answer:

Explanation:

The objective here is mainly drawing the diagrams of every stereoisomer for 1-bromo-2-chloro-1,2-difluorocyclopentane.

Stereoisomerism is the difference of the spatial arrangement of atoms in a molecule or a compound with the same molecular formula.

For 1-bromo-2-chloro-1,2-difluorocyclopentane.

We have the stereoisomers as follows:

(1R,2S)-1-bromo-2-chloro-1,2-difluorocyclopentane.

(1S,2R)-1-bromo-2-chloro-1,2-difluorocyclopentane.

(1S,1S)-1-bromo-2-chloro-1,2-difluorocyclopentane.

(1R,1R)-1-bromo-2-chloro-1,2-difluorocyclopentane.

Their diagrams are drawn and shown in the attached file below in the order with which they are listed above.

Answer: 7.45 g of [tex]Pb(NO_3)_2[/tex] excess reagent are left over after the reaction is complete.

Explanation:

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

a) [tex]{\text{Number of moles of} KI}=\frac{7.55g}{166g/mol}=0.045moles[/tex]

b) [tex]{\text{Number of moles of} Pb(NO_3)_2}=\frac{9.06g}{331.2g/mol}=0.027moles[/tex]

The balanced chemical reaction is :

[tex]Pb(NO_3)_2(s)+2KI(s)\rightarrow 2KNO_3(s)+PbI(s)[/tex]

According to stoichiometry :

2 moles of [tex]KI[/tex] require = 1 mole of [tex]Pb(NO_3)_2[/tex]

Thus 0.045 moles of [tex]KI[/tex] will require=[tex]\frac{1}{2}\times 0.045=0.0225moles[/tex]  of [tex]Pb(NO_3)_2[/tex]

Thus [tex]KI[/tex] is the limiting reagent as it limits the formation of product and [tex]Pb(NO_3)_2[/tex] is the excess reagent as (0.045-0.0225) = 0.0225 moles are left

Mass of [tex]Pb(NO_3)_2=moles\times {\text {Molar mass}}=0.0225moles\times 331.2g/mol=7.45g[/tex]

Thus 7.45 g of [tex]Pb(NO_3)_2[/tex] of excess reagent are left over after the reaction is complete.

Answer:

A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total charge is the same for both the reactants and the products.In other words, the mass and the charge are balanced on both sides of the reaction.

Explanation:

Answer:

D

Explanation:

Color, texture, and density are all physical properties but reactivity is a chemical property so the answer is D.

Answer:

The correct answer is 12.43 Liters.

Explanation:

Based on the given question, the volume V₁ occupied by the sample of carbon dioxide gas is 14.2 liters at temperature (T₁) 65 degree C or 65+273 K = 338 K.  

The gas is cooled at a temperature (T₂) 23 degree C or 273+23 K = 296 K

The volume of the gas (V₂) after cooling can be determined by using the formula,  

V₁/T₁ = V₂/T₂

14.2/338 = V₂/296

0.0420 = V₂/296

V₂ = 0.0420 * 296  

V₂ = 12.43 Liters.  

Answer:

(A). C6H5Br + Mg(in ether) -----------> C6H5MgBr.

(B). C6H5MgBr + O = C = O -----------> C6H5-COO^- Mg^+ Br.

(C). C6H5-COO^- Mg^+ Br + HCl --------> C6H5-COOH + Mg^+Br(OH).

PRODUCTS=> C6H5-COOH and Mg^+Br(OH).

Explanation:

A Grignard reagent is a reagent that/which is an organometallic compound that is R -Mg- X. The R = alkyl, vinyl or allyl and the X = halogens.

It must be noted that an important reaction of Grignard reagent is its reaction with compounds containing the Carbonyl that is -CO functional group and this kind of Reaction is known as a Grignard Reaction.

So, in this question we are told that;

=> "1-bromo-benzene andits subsequent reaction with solid carbon dioxide (CO2) followed by acidic workup (using HCl asthe acid). "

Thus;

(A). C6H5Br + Mg(in ether) -----------> C6H5MgBr.

(B). C6H5MgBr + O = C = O -----------> C6H5-COO^- Mg^+ Br.

(C). C6H5-COO^- Mg^+ Br + HCl --------> C6H5-COOH + Mg^+Br(OH).

Compounds formed from non-metals consist of molecules. The atoms in a molecule are joined together by covalent bonds. These bonds form when atoms share pairs of electrons.

Answer:

slump. weathering, and creep

Explanation:

Freezing and thawing cycle in geology is the process in which water gets in between soil space or rock cracks, freeze in a cold season, and then melt in a warmer season, exerting a force on the soil or rock around it. This force is due to the expansion and contraction of water when it changes from ice to liquid water.

The three geological processes slump, weathering and creep all depend on thawing and freezing cycle among other factors.

Answer:

It is slump, weathering and creep

Explanation:

Took the test on edg