Answer:
Density = M/V
so 3.81/14.3 .266g/ml
Explanation:
The term "cycle" is used in Water Cycle because ?
Answer:
because cycle is a prosess that goes through multiple stages
Explanation:
.
If the loss of 3500 kcal is equal to a loss of 1.0 lb, how many does will it take Charles to loose 5.0 lb
How many moles of H2 are needed to produce 34.8 moles of NH3?
Moles H₂ needed = 52.2
Further explanationA reaction coefficient is a number in the chemical formula of a substance involved in the reaction equation. The reaction coefficient is useful for equalizing reagents and products.
Reaction
N₂(g)+3H₂(g)⇒2NH₃(g)
From the reaction equation above, the reaction coefficient shows the mole ratio of reagents and products
moles NH₃ produced = 34.8
mol H₂: moles NH₃ = 3: 2, so moles H₂ :
[tex]\tt moles~H_2=\dfrac{coefficient~H_2}{coefficient~NH_3}\times moles~NH_3\\\\moles~H_2= \dfrac{3}{2}\times 34.8=52.2[/tex]
easons for the dense packing in metals
Explanation:
Typically, only one element is present, so all atomic radii are the same. -Metallic bonding is not directional. -Nearest neighbor distances tend to be small in order to lower bond energy.
A person has a mass of 63.4kg. What is the weight in pounds?
This table shows data collected about four different landforms. Landform What Is Its Landmass? What Is Its Shape? Is There Water? W Large Has steep sides No X Large Goes down and comes back up No Y Small A circle Filled with water Z Small Rises up in the middle then goes back down Surrounded by water Question Which landform is an island?
A.
W because it has steep sides.
B.
X because it dips in the middle.
C.
Y because it is small and a circle.
D.
Z because it is surrounded by water
Answer:
answer is d
Explanation:
because it is surrounded by water
If the pH of a certain solution changes from 8 to 9, what happens to the hydrogen ion concentration
The concentration of OH⁻ ions will become 10 times the initial concentration.
What is indicated by the hydrogen ion concentration?A more useful approach to express the concentration of hydrogen ions is on the pH scale, which is the logarithm of the reciprocal of the hydrogen ion concentration in gram moles per liter. The concentrations of the hydrogen ion (H+) and the hydroxyl ion (OH) are both equal to 10⁻⁷ in a neutral solution. The pH of seven is neutral.
Solution pH 1 equals 8.
Solution's pH is 2 = 9.
pOH₁ = 14 - 8 = 6
pOH₂ = 14 - 9 = 5
OH₁⁻ = 10⁻⁶
OH₂⁻ = 10⁻⁵
Ratio = 10⁻⁵ / 10⁻⁶ = 10
To learn more about concentration of hydrogen ions from given link
https://brainly.com/question/4680271
#SPJ4
If an electron falls from the n = 2 to the n = 1 energy levels in a Hydrogen atom what wavelength of light is emitted?
Answer:
Ultraviolet
Explanation:
It doesn't use much energy and so it creates ultraviolet light.
Two gases, helium and X, are released from one end of an evacuated long cylinder at the same time. If it takes the helium atoms 3 times faster than gas X to effuse from one end of the cylinder to the other end, what is gas X?
Answer:
The correct answer is HOF gas.
Explanation:
Based on the given information, the helium atoms effuses three times faster in comparison to the gas X.
The rate of effusion is determined by,
r is inversely proportional to 1/√M, here M is the molecular mass of the gas.
and r is inversely proportional to 1/t, here t is the time taken for effusion.
Thus, t is directly proportional to √M
The molecular mass of He is 4.
tHe = tX/3 (Here tx is the time taken for gas X)
The molecular mass of X is not known.
tX/tHe =√Mx/MHe
3 = √Mx/4
By squaring both the sides we get,
9 = Mx/4
Mx = 36
36 is the molecular mass of gas HOF, that is, (1+16+19 = 36). Hence, the gas X is 36.
8. Give me an example of a number that we use that is actually exact and not subject to sig, digit rules. Again, give me the name of the number (My example "I have 25 students in class). US
Answer:
There are 58 people in the cinema.
Explanation:
This number is actually exact and not subject to sig, digit rules.
Calcium carbonate is a white mineral. A chemist heats calcium carbonate, CaCO3, to produce carbon dioxide, CO2, and a white powder, CaO. The following chemical equation shows the reaction.CaCO3 → CO2 + CaO Explain why the products have different properties than the reactants
Answer:
A chemical change has occurred
Explanation:
Given reaction expression:
CaCO₃ → CaO + CO₂
The reaction is a decomposition reaction in which a compound is dissociated into simple products.
The reason why the products have different properties than the reactants is because a chemical change has occurred.
A chemical change is accompanied by the formation of a new productSuch new products have different properties compared to the compound that forms them. Therefore, the products and reactants are different chemically due to chemical change that has occurred.The products of the decomposition of calcium carbonate have different properties because a chemical change has occured in the reaction to form new substances.
CHEMICAL CHANGE:A chemical change is a type of change in which new products are formed. The bonds of the reactants are broken and rearranged to form entirely new substances. According to this question, calcium carbonate is a white mineral, which when heated produces carbon dioxide, CO2, and a white powder, CaO as follows: CaCO3 → CO2 + CaOThe products in this reaction are different in their properties from the reactants because a chemical change has caused new substances to be formed.Learn more about chemical change at: https://brainly.com/question/1161517?referrer=searchResults
Please help me I need these answers
Answer:
Q8) True
Q9) First ionization energy
Q10) A metal oxide
Explanation:
One of the properties of group one elements (alkali metals) is that they combine with water to form basic solutions. E.g 2Na(s)+2H2O(l)→2NaOH(aq)+H2(g).
An inverse relationship exists between the distance of the outermost electron in the atom from the nucleus and the first ionization energy. As the distance between the outermost electron and the nucleus in group 17 elements increases, their first ionization energies decreases accordingly.
Group 1 elements react with oxygen to yield the corresponding metal oxides. E.g 4 Na + O2 --> 2 Na2O
1. Why the names such as sodium(l) chloride for NaCl and
magnesium(II) chloride for MgCl2 are not used?
Answer:
It's because the NaCl and MgCl2 is shorter and easier to remember
Which of the following pairs of elements will not form an ionic bond with
each other.
Sodium and lodine
Copper and Oxygen
Magnesium and Chlorine
Carbon and Sulfur
Answer:
Explanation:
Sodium and Iodine are in columns 2 and 17. They will be ionic.
Copper and oxygen will be ionic. Oxygen is a powerful receiver of electrons.
Magnesium and Chlorine same answer as the first one.
Carbon and Sulfur. Not so much. They do not form an ionic bond. They are basically closer to being two non metals.
When balancing redox reactions under acidic conditions in aqueous solution, oxygen is balanced by adding:
Answer:
When balancing redox reactions under acidic conditions in aqueous solution, oxygen is balanced by adding water as much as oxygen we have, on the opposite side, where the oxygens are.
Explanation:
We can see this redox balance, in order to determine what we said.
The unbalanced reaction is: MnO₂ + HCl → MnCl₂ + Cl₂ + H₂O
The HCl determines, we are in acidic conditions.
We need to determine the half reactions:
Mn⁴⁺ → Mn²⁺ (In this case, the oxidation number decreased)
This is the reduction. Mn caught 2 electrons
Mn⁴⁺ + 2e⁻ → Mn²⁺
Cl⁻ → Cl₂
In ground state, the oxidation number is 0. The chloride was oxidized to chlorine. As Cl is a dyatomic molecule, we need 2 chlorides to balance so finally it released 2 electrons. This is the oxidation (ox. number has increased) 2Cl⁻ → Cl₂ + 2e⁻
Mn⁴⁺ + 2e⁻ → Mn²⁺
2Cl⁻ → Cl₂ + 2e⁻
Mn⁴⁺ + 2Cl⁻ → Mn²⁺ + Cl₂
Now we balance the oxygen. In reactant side, we have 2, so we complete with 2 water in the product side. We add water as much as oxygen we have, on the opposite side, where the oxygens are. (If we have 2 oxygen in reactant side, and we have 1 water, we need 1 more water)
So, as we added 2 H₂O, we complete with protons, on the opposite side
Mn⁴⁺ + 4H⁺ + 4Cl⁻ → Mn²⁺ + 2Cl⁻ + Cl₂ + 2H₂O
(Notice, we had 2Cl⁻, but globally we have 4H⁺. At least, we have 4HCl)
The balanced equation is: MnO₂ + 4HCl → MnCl₂ + Cl₂ + 2H₂O
List 3 properties of the hair’s cuticle.
Newton's Second Law of Motion says that the acceleration of an object depends on the object's mass and the
A
equation E=MC^2E=MC
2
.
B
amount of force applied to the object.
C
negative acceleration factor.
D
amount of atoms the object has.
Answer: Hello! I do believe the answer is A.
Explanation: please mark me brainliest! hope this helps
Answer:
B
Explanation:
When 2.3 × 10^3 g of CaCO3 are heated, the actual yield of CaO is 1.09 × 10^3g. What is
the percent yield?
1. 51.0643
2. 54.084
3. 53.0474
4. 84.5827
5. 59.4924
6. 93.7005
7. 49.4244
8. 78.3748
9. 44.6193
10. 72.7638
Answer in units of %.
The percent yield : 4. 84.58%
Further explanationReaction
CaCO₃ ⇄ CaO+CO₂
mass CaCO₃ = 2.3 × 10³ g
mol CaCO₃ (MW=100.0869 g/mol) :
[tex]\tt mol=\dfrac{mass}{MW}\\\\mol=\dfrac{2.3\times 10^3}{100,0869}\\\\mol=22.98[/tex]
From the equation, mol CaCO₃ : CaO = 1 : 1, so mol CaO=22.98
mass CaO(MW=56.0774 g/mol)⇒ (theoretical) :
[tex]\tt mass=mol\times MW\\\\mass=22.98\times 56,0774\\\\mass=1288.659~g[/tex]
The percent yield :
[tex]\tt \%yield=\dfrac{actual}{theoretical}\times 100\%\\\\\%yield=\dfrac{1090}{1288.659}\times 100\%\\\\\5yield=84.58\%[/tex]
Can someone please help me with this
What is the mass number of an atom that consists of 20 protons, 20 neutrons, and 18 electrons?
Answer:
C)a mass number of 38
Explanation:
yes
What is the mass of 3.99 mol of nickel?
Answer:
234.213
Explanation:
Moles of Nickel x 58.70 = Grams
3.99 x 58.70 = 234.213
You are logged in as Lara Khader
y (1)
Question 2
Not yet answered
Marked out of 1.0
The mass of Ba(CIO), formed when 0.50 mole of Ba(OH), is treated with 0.80 mol of HCIO, according to the reaction below is
Ba(OH), + 2HCIO, ----> Ba(CIO3)2 + 2H,0
Ba: 137.3 g/mol
O: 16 g/mol
H: 1 g/mol
Cl: 35.45 g/mol
Flag question
16
Select one:
304 2 g
243.4 g
121.79
380.7 g
None of the above
Next page
The mass of Ba(CIO₃)₂ : 121.72 g
Further explanationReaction
Ba(OH)₂ + 2HCIO₃ ----> Ba(CIO₃)₂ + 2H₂O
Limiting reactant :
Ba(OH)₂ : 2HCIO₃ =
[tex]\tt \dfrac{0.5}{1}\div \dfrac{0.8}{2}=0.5\div 0.4\rightarrow HClO_3~limiting(smaller~ratio)[/tex]mol Ba(CIO₃)₂ based on limiting reactant(HCIO₃) :
[tex]\tt \dfrac{1}{2}\times 0.8=0.4[/tex]
MW Ba(CIO₃)₂ =Ba+2.Cl+6.O=137.3 + 2 x 35.5 + 6 x 16 = 304.3
mass of Ba(CIO₃)₂ :
[tex]\tt mass=mol\times MW\\\\mass=0.4\times 304.3=121.72~g[/tex]
What is a chemical treatment process used to remove dissolved ionic species from contaminated aqueous streams?
Answer:
Ion exchange.
Explanation:
One of the ways in which water can be treated is through the process known as ION EXCHANGE. Using this for treating water has to do basically with the transfer or say the exchange of ions.
Ion exchanges is done by exchanging ions which are considered as 'unfit' or contaminants by the ones that are "fit".
Ions from what is known as zeolite or resin is been exchanged with the ions in the water. Cations are exchanged with cations and anions are exchanged with anions.
NB: this method is a good method or removing contaminants that are ions but not contaminants that are not ions.
Help please! I’ll give brainliest!
if T1=454 K and T2=356 K atm and V1=101.85 mL. then what is V2? please help asap!!!
Answer:
opp
Explanation:
If 45.0 mL of ethanol (density =0.789g/mol) initially at 6.0°C mix with 45.0 mL of water (density =1.0 g/mol) initially at 28.0°C in an insulated beaker, what is the final temperature of the mixture, assuming that no heat is lost? (CetOH =2.42 J/G C)
The final temperature of the mixture : 21.1° C
Further explanationThe law of conservation of energy can be applied to heat changes, i.e. the heat received / absorbed is the same as the heat released
Q in(gained) = Q out(lost)
Heat can be calculated using the formula:
Q = mc∆T
Q = heat, J
m = mass, g
c = specific heat, joules / g ° C
∆T = temperature difference, ° C / K
Q ethanol=Q water
mass ethanol=
[tex]\tt mass=\rho\times V\\\\mass=0.789\times 45=35.505~g[/tex]
mass water =
[tex]\tt mass=1~g/ml\times 45~ml=45~g[/tex]
then the heat transfer :
[tex]\tt 35.505\times 2.42~J/g^oC\times (t-6)=45\times 4.18~J/g^oC\times (28-t)\\\\85.922t-515.533=5266.8-188.1t\\\\274.022t=5782.33\rightarrow t=21.1^oC[/tex]
Is a Krypton atom still a Krypton atom if you change the number of neutrons?
Group of answer choices
Answer:
Yes
Explanation:
A krypton atom will remain the same despite changing the number of neutrons they contain.
The neutron is a nuclear particle found within an atom.
Atoms with different number of neutrons belonging to the same element are called isotopes. Only changes to the number of protons changes the elemental designation of an atom. A change in the number of electrons and neutrons does not affect the identity of such atom.Make the following conversion.
954 g= _ kg
0954000
95400
0.954
0.0954
Answer:
0.954
Explanation:
1000 grams is 1 kg
954 grams is 954/1000 kg or 0.954
How do we write a formula for those combinations of atoms?
Answer:
please follow me
Explanation:
hope it helps.......
Calculate the mass in grams of 18.6 mol of CuSO4.5H2O.
Answer:
just multiply 18.6 to molar mass of cuso4.5h20
Explanation:
if you have any doubt comment