Answer:
1.Difference.
Mixtures are physically combined and can be separated by physical means while compounds are chemically combined and are separated by chemical means.
2.Mixtures do not have mixed boiling and melting points while compounds have mixed boiling and melting points.
2.Similarity.
Both mixtures and compounds are composed of two or more substances or elements combined.
Both can be separated.
Mixtures and compounds are alike in the following ways:
1. Both mixture and compound contains two or more substances.
2. Both mixture and compound can be separated.
3. Both mixture and compound have physical properties.
Differences between mixture and compound:Mixtures and compounds are different in the following ways:
1. A mixture contains two or more substances that are not chemically combined together while a compound contains two or more substances chemically combined together.
2. A mixture can be separated by physical methods while a compound can only be separated by chemical methods.
3. Mixtures can not be represented using a chemical formula. Compounds can be represented by chemical formula.
4. Examples of mixtures include: milk, kerosene in water etc. Examples of compounds include water, sodium chloride etc
Learn more: https://brainly.com/question/184321
What can you infer about particle's size?
Answer:
particle size analysis, particle size measurement, or simply particle sizing is the collective name of the technical procedures, or laboratory techniques which determines the size range, and/or the average, or mean size of the particles in a powder or liquid sample.
Explanation:
calculate the weight of 5 atoms of Mg.
Answer:
2.0179701e-22
Explanation:
what would happen if the
attractive forces between all of the particles
of matter on Earth were equal?
The magnitude of attractive forces between particles that compose matter determine the state of matter. Hence, if all particles of matter on earth have equal attractive forces, only a single state of matter (solid, liquid or gas) will exist on earth.
Matter exists in three states;
SolidLiquidGasIn solids, there exists the greatest magnitude of attractive forces between particles.
There are weaker inter-molecular attractive forces between liquid particles. However, inter molecular attractive forces are almost non-existent in gases.
The reason for the existence of different states of matter on earth is difference in magnitude of inter molecular attractive forces in each state of matter.
If all particles of matter possess equal attractive forces, only one state of matter will be found on earth; either solid, liquid or gas.
Learn more; https://brainly.com/question/9007693
Which describes how rubbing fur on a rubber rod makes the rod negatively charged. Select one: A. Electrons move from the fur to the rubber rod. B. Electrons move from the rubber rod to the fur. C. Protons move from the rubber rod to the fur.
Answer:
A
Explanation:
Rubbing fur on a rubber rod results in the rod becoming negatively charged as a result of the movement of electrons from the fur to the rubber rod.
The process is called triboelectric charging. When the two substances are rubbed together, their atoms come into close proximity with each other and their electron clouds interact with the fur losing electrons to the rubber due to the fact that the atoms of the rubber have higher affinities for electrons than the atoms of the fur. Hence, the fur becomes positively charged while the rubber becomes negatively charged.
Would it be possible for electrons in the 2p orbitals to be inside the 2s orbital?
(Please explain)
Answer:
Yes
Explanation:
You can have 2s and have part of the 2p of the row in the p section.
PLEASE HELP ASAP I EILL GIVE 100 POINTS!!! Kristy is on the track team. She runs the one kilometer race by going four times around the circular track. How does Kristy velocity change.
A. Her velocity changes countinually since her direction constantly changes
B. Her velocity depends on only on how she paces herself during the race
C. Her velocity is the same as her speed
D. Her speed changes at the same rate as velocity
Answer:A
Explanation:
Which of the following most completely describes a redox reaction?
O A. A chemical decomposition reaction
B. A hydrocarbon combustion reaction
O c. A reaction resulting in electron sharing
D. An oxidation and reduction reaction
Answer:
D.
Explanation:
Because i just copied the person above tbh, and i also got it right in the quiz
To solve such this we must know the concept of redox reaction. Therefore, the correct option is option D that is an oxidation and reduction reaction.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.
Redox reaction is a chemical reaction where oxidation and reduction takes place simultaneously. Oxidation is loss of electrons and reduction is gain of electrons. The electron transfer from oxidant to reductant.
Therefore, the correct option is option D that is an oxidation and reduction reaction.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ2
The formula for one molecule of sucrose is shown below.
C12H22011
How many atoms in all are in one molecule of sucrose?
Answer:
45
Explanation:
There are 12 Carbons
There are 22 Hydrogens
There are 11 Oxygens.
I think the answer is either 0 or 45. But the wording is very sloppy. It is not really atoms that are present. There are ions.
Go with 45 but hold your nose when writing your answer.
What is the formula for nitrogen monoxide?
O N203
O NO
O N₂O,
O None of the answers are correct
Critical thinking : Place an unmagnetized piece of iron in a magnetic field (eg iron filings near a magnet). Why is it attracted to the magnet?
Magnets attract iron due to the influence of their magnetic field upon the iron. Before a piece of iron enters the magnet, the polarization of the irons atoms is random. When exposed to the magnetic field, the atoms begin to align their electrons with the flow of the magnetic field, which makes the iron magnetized as well. This, in turn, creates an attraction between the two magnetized objects. This is why a piece of iron that is exposed to a magnet becomes magnetic for some time afterward.
4x+15-3x+10= help me please
Answer:
7x+5
Explanation:
4x+15-3x+10
-10 -10
--------------------
4x+5-3x
+3x. +3x
---------------------
7x+5
Explain why both a power source (like a battery) and a complete circuit are necessary for an electromagnet to function.
this is science homework by the way, please help me with it:)
Answer:
Electromagnets are only functional when electricity is passing through them. In other words, they only create a magnetic field when there is an electric current flowing.
A power source like a battery is therefore necessary to supply the electric current necessary for the magnet to work however, it will not work unless the circuit is closed as electricity cannot not flow in an open circuit because current needs to be able to flow from one end of a power source to the other end.
Explanation:
ha hot dog hamburger hamburger ng baboy hahaha bomba girl home baboy
How do you determine if you have a covalent bond?
Answer:
If the electronegativity difference (usually called ΔEN) is less than 0.5, then the bond is nonpolar covalent. If the ΔEN is between 0.5 and 1.6, the bond is considered polar covalent. If the ΔEN is greater than 2.0, then the bond is ionic.
Explanation:
Hope this helped :)
Which process creates new cells from existing cells?
A. Cell division
B.Cell limitation
C.Cell addition
D.No answer text provided.
Answer:
the answer is cell division
Explanation:
cell division is the process by which a present cell divides into two or more daughter cells.
the process can also be called cell cycle
is aluminum Pure or Impure?
Answer:
The aluminium is impure
How many electrons are gained in the half-reaction 02, + electrons — 202-
Answer:
2
Explanation:
A
Answer: 4!!!
Explanation: j took the quiz!!!
In the article, Invasion of the Periodical Cicadas, why do scienctists believe that cicadas only reproduce every 13 or 17 years? Explain your answer with evidence from the text.
Hi, you've asked an incomplete question. However, I assumed you are referring to the article found on the Scientific American website.
Explanation:
Remember, according to that article we are told that scientists notice that these insects have a long nymphal (immature form before becoming adults) stage, one that can last up to 13 to 17 years on the ground before they leave the ground looking for mating partners.
Because it is only after mating occurs at this point that their eggs are laid, that is why scientists believe that cicadas only reproduce every 13 or 17 years.
how can animal fossils help us understand the earth
Answer:
Some animals and plant are only known to us as fossils. hope this helps. and have a nice day:)
Use the decoder to get the lock combination
Answer:
u didnt attach an image or anything so this is quite confusing.
Explanation:
??
Answer:
Okay
Explanation:
does formaldehyde classified as a pure substance or a mixture
Answer:
pure substance
Explanation:
it is a naturally occuring compound
Answer:
Formaldehyde is a mixed substance. It is made up of Carbon, 2 Hydrogen, and an Oxygen.
Explanation:
The formula is CH2O
PLEASE HELPPP :[
When a chemical change occurs a new substance is created. Harvey put hamburgers on his barbecue, and they cooked. He left fruit out on the counter and they started to rot.
What evidence about chemical changes can Harvey use to support the examples in his experiment?
A.The chemical changes occurred because the chemicals changed.
B. The chemical changes occurred because there was a change in light energy.
C. The fruit and the hamburgers were affected by an increase in heat energy.
D. The fruit and the hamburgers were affected by a decrease in heat energy.
Answer:
C. The fruit and the hamburgers were affected by an increase in heat energy.
Explanation:
One claim Harvey can use to support the examples from his experiment is that the hamburgers and fruits were affected by an increase in the heat energy.
This chemical change is one that is solely driven. This action Harvey is carrying out is cookingWhen meals are cooked, the raw substances undergoes chemical change via the action of heat.Answer:
btw it's not c
Explanation:
a fruit rotting or infected is a chemical reaction therefore,its close to d
How much energy would be required to heat 10.0 g of water at 0 degrees C to 100 degrees C,and change it into steam at 100 degrees C
Answer:
Q = 4180 J
Explanation:
Given data:
Mass of water = 10.0 g
Initial temperature = 0°C
Final temperature = 100°C
Heat required = ?
Solution:
Specific heat capacity of water is 4.18 j/g.°C.
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 100°C - 0°C
ΔT = 100°C
Q = 10.0 g ×4.18 j/g.°C × 100°C
Q = 4180 J
The #2 discovery was:
a
heliocentrism
0
E=MCP
c
heredity
general relativity
d
Answer:
bug vfyjovcduvcu Harris's
Which statement describes how chemical formulas, such as H2O, represent compounds?
They show the types of molecules that make up an atom.
They show the elements that make up a compound.
They show the three-dimensional shape of a molecule.
They show the types of bonds that exist between elements.
Answer: B. They show the elements that make up a compound
Explanation:
Answer:
B
Explanation:
when an atom loses electrons, what does it become?
A sample of which element could have a volume of 1.5 cubic centimeters (cm3) and a mass of 7.5 grams (g)?
Answer:
5 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{7.5}{1.5} \\ [/tex]
We have the final answer as
5 g/cm³Hope this helps you
Which of the following is the best way to model the process of weathering?
Using a fan on a pile of sand causing the sand to move into a pile in a new location.
Using a ramp to dump sand at the bottom causing the sand to pile up.
Using a watering can sprinkle water onto sand causing the sand to move to a new location.
Filling a glass bottle with water and allowing it to freeze causing the bottle to break.
The best model of weathering is using a fan on a pile of sand causing the sand to move into a pile in a new location.
Weathering refers to the gradual breakdown of a rock due to the agents of denudation. The agents of denudation could be physical, chemical or biological.
The breakdown of rocks leads to the formation of soil. The closest model to the weathering of rock is using a fan on a pile of sand causing the sand to move into a pile in a new location.
The pile represents the rock which is being broken down as the fan blows the pile and it settles on a new location.
Learn more: https://brainly.com/question/14426457
what is hard water and what causes hardness of water
Answer:
hard water is ice
Explanation:
ice is formed as the water temperature decreases and then it freezes
HELP ME PLEASEEEEEEEEEEEEEEE
(I really dont know the subject i just know science)
Answer:
B
Explanation:
weight , w= mg where m is the mass of the object (unit is kg ) and g is the gravitational force acting on the object ( unit is m/s^2 )
hope it helps
What did the Curies demonstrate by studying pitchblende?
A- Uranium is not the only radioactive element.
B- All elements are potentially radioactive.
C-Radium can cause anemia, bone and tissue damage, and death.
D-Uranium salts emit something that can expose photographic film.
Answer:
A- Uranium is not only the radioactive element