compare dip-slip and strike-slip faults. sort the properties into the appropriate categories.

Answers

Answer 1

Faults called strike-slip occur when rocks slide past one another, whereas faults called dip-slip occur when rocks slide along the fault's dip.

Dip-slip faults are those that move in the same direction as the dip plane; depending on how they move, they can be classified as normal or reverse (thrust) faults. Strike-slip faults, which shift horizontally, can be either left- or right-lateral in orientation.

Dip-slip faults are those that move in the same direction as the dip plane; depending on how they move, they can be classified as normal or reverse (thrust) faults. Strike-slip faults, which shift horizontally, can be either left- or right-lateral in orientation.

To learn more about the dip-slip faults, refer to:

https://brainly.com/question/30749319

#SPJ4


Related Questions

Which of the layers of Upheaval Dome are most resistant to erosion? 50 m Multiple Choice the sandstones the mudstones the mudstones with pebbles The layers are all equally resistant to erosion. O

Answers

The correct answer is "the sandstones." Among the given options, sandstones are generally more resistant to erosion compared to mudstones and mudstones with pebbles.

Sandstones are composed of compacted sand grains that are cemented together, providing them with greater hardness and durability. Mudstones, on the other hand, consist of fine-grained sediment that is less resistant to weathering and erosion. The presence of pebbles in mudstones may slightly increase their resistance to erosion but not to the same extent as sandstones. Therefore, the sandstone layers in Upheaval Dome are expected to be the most resistant to erosion.

Learn more about Upheaval Dome here:

https://brainly.com/question/8606307

#SPJ11

which type of stream channel is most common in flat areas? meandering, braided, sinous, or straight?

Answers

In flat areas, the most common type of stream channel is the meandering channel.

Meandering channels are characterized by their sinuous (curvy) shape, as the water flows from side to side within the stream channel. These channels are often found in areas with low slopes and are characterized by slow-moving water. In contrast, braided channels are often found in areas with high sediment loads and are characterized by a complex network of interwoven channels. Sinuous channels, on the other hand, are characterized by their tight curves and tend to be found in areas with more rock and harder soils. Finally, straight channels are just what they sound like, with a linear path from upstream to downstream. Overall, the meandering channel is the most common type of stream channel in flat areas due to its ability to adapt to low gradient and slow-moving water.

To know more about meandering channel visit:

https://brainly.com/question/31454530

#SPJ11

determine whether the statement describes a population or a sample. the types of cars of a sample of 23 professors at the local college.

Answers

The statement describes a sample of the types of cars owned by 23 professors at the local college. A sample is a subset of a population, which is a larger group that shares a common characteristic. In this case, the population could be all the professors at the local college, or even all the residents of the town where the college is located.

The statement describes a sample of the types of cars owned by 23 professors at the local college. A sample is a subset of a population, which is a larger group that shares a common characteristic. In this case, the population could be all the professors at the local college, or even all the residents of the town where the college is located. However, the statement only provides information about the types of cars owned by 23 professors, so it is a sample. It is important to note that a sample should be representative of the population it is drawn from in order to make accurate conclusions about the population.

to know more about population visit:

https://brainly.com/question/15889243

#SPJ11

Britain and France both want to gain control of Fashoda, in East Africa, but each of them would prefer to do this without going to war with the other state. There is going to be a brief window of opportunity where sending an expedition to Fashoda would allow the sender to gain permanent control of this valuable outpost. Given difficulties of communication each state has to make the decision whether or not to send an expedition to claim Fashoda without knowing what the other side will do. If both states send expeditions, war will result. War is undesirable, but letting the other state take Fashoda is a worse outcome, since the two are engaged in serious great power rivalry.
Does the above summary give you enough information to determine the payoff structure? What is the payoff structure? And can you predict what the outcome will be, if rational choice assumptions apply?
Group of answer choices
No, this does not provide enough information to determine the payoff structure, or the outcome.
Yes, CD>DD>CC>DC. Neither state will send an expedition and war will be avoided.
Yes, DC>CC>DD>CD, and both states will send expeditions and thus go to war.
Yes, CC>DC/DD>CD. The outcome is indeterminate, since the best option for each state depends upon what the other one does.

Answers

Yes, CC>DC/DD>CD. The outcome is indeterminate, since the best option for each state depends on what the other one does.

Based on the given information, the payoff structure can be determined as follows:

CC: Both states send expeditions and claim Fashoda without going to war. This outcome is preferred by both states, as they both gain control of the valuable outpost without engaging in conflict.

DC/DD: One state sends an expedition and claims Fashoda, while the other state does not send an expedition. The state that claims Fashoda (DC) achieves a better outcome than the state that doesn't send an expedition (DD). However, both outcomes are worse than the preferred outcome of both states claiming Fashoda without war (CC).

CD: Both states send expeditions and go to war. This is the least desirable outcome for both states, as it leads to conflict and potential losses.

Since the outcome CC is the best option for both states, and the outcome CD is the worst, the rational choice assumption would suggest that both states would refrain from sending expeditions to Fashoda to avoid war. However, without knowing what the other state will do, the outcome is indeterminate. It is possible that both states may decide to send expeditions, resulting in war, or they may both choose not to send expeditions to avoid conflict.

The given information allows us to determine the payoff structure as CC>DC/DD>CD. However, the outcome is indeterminate, as the best option for each state depends on the decision made by the other state. Rational choice assumptions suggest that both states would choose not to send expeditions to Fashoda to avoid war, but without knowledge of the other state's decision, the actual outcome cannot be predicted with certainty.

To know more about power rivalry visit:

https://brainly.com/question/30607352

#SPJ11

which biome is typically found in areas with marine west coast climates, characterized by high precipitation, moderate air temperatures, summer fog, and an overall maritime influence?

Answers

The biome that is typically found in areas with marine west coast climates is the temperate rainforest biome.

This biome is characterized by high levels of precipitation, typically between 150-200 cm per year, and moderate air temperatures, with average temperatures ranging from 5-20°C. The temperate rainforest biome is also known for its summer fog, which is caused by the cool air of the ocean meeting the warm air of the land. This biome is found in regions with an overall maritime influence, such as the Pacific Northwest of North America, and includes tree species such as Douglas fir, western red cedar, and Sitka spruce. The high precipitation levels in this biome support a diverse array of plant and animal species, making it an important ecosystem for biodiversity.

To know more about biome visit:

https://brainly.com/question/30256754

#SPJ11

The two coordinates below will take you to two different kinds of
deserts. What are the names of these deserts, what types are they
and how do they differ? Briefly explain why these regions are
arid.

Answers

There are several factors that contribute to the aridity of certain regions. One key factor is the global atmospheric circulation patterns.

Deserts often occur in areas where air masses descend and become dry due to the Hadley Cell circulation, which creates high-pressure systems and inhibits the formation of clouds and precipitation.

Additionally, the presence of mountain ranges can create rain shadows, where moist air is forced to rise over mountains, resulting in cooling and condensation of moisture on one side, leaving the other side dry. This leads to the formation of desert regions.

Another factor is the proximity to large bodies of water. Coastal desert regions can form when cool ocean currents interact with prevailing winds, causing moisture to be carried away from the coast, resulting in arid conditions.

Other factors such as latitude, topography, and the influence of continental interiors can also contribute to the aridity of specific regions.

To provide specific information about the names and types of deserts corresponding to the given coordinates, please provide the coordinates or names of the deserts you would like to know about.

Learn more about topography visit:

brainly.com/question/15924652

#SPJ11

The economy of the Confederate States depended on agricultural exports, especially cotton. To damage the Confederates ability to fight, the Union
Group of answer choices
1) Used chemical warfare to destroy the fields and crops. States which had once been exporters of rice were now forced to import food.
2) Blockaded Southern ports and shipping using new technology such as "iron clads" and improved gun mounts for the Mississippi flotilla.
3) Made it illegal to grow certain crops in the Confederacy.
4) All of the above were true.

Answers

The Union's strategy to weaken the Confederate States during the Civil War involved a combination of tactics aimed at damaging the economy.

As the Confederate economy heavily relied on agricultural exports, especially cotton, the Union blockaded Southern ports and shipping using advanced technology such as "iron clads" and improved gun mounts for the Mississippi flotilla. This disrupted the trade and supply chain, making it difficult for the Confederacy to export and import goods. Additionally, the Union made it illegal to grow certain crops in the Confederacy to further disrupt the agricultural sector. While chemical warfare was not used to destroy fields and crops, the Union's actions still had a severe impact on the Confederate economy, forcing states that had once been exporters of rice to import food. Overall, the Union's strategies to cripple the Confederate economy were successful in contributing to the ultimate Union victory.

To know more about Confederate States visit:

https://brainly.com/question/29823950

#SPJ11

Partial melting influences the melt composition in the following way:
A. Less partial melting will produce a more mafic magma
B. Less partial melting will produce a more felsic magma
C. Regardless of the amount of melting, the melt composition is the same
D. None of the above

Answers

Answer:

i think it is none of the above

Partial melting influences the melt composition in the following way Less partial melting will produce a more felsic magma.

Partial melting refers to the process in which only a portion of a rock melts, resulting in the formation of magma. During partial melting, different minerals within the rock have varying melting points, causing them to melt at different rates. The composition of the resulting melt is influenced by the minerals that have melted and those that remain solid.

In general, less partial melting means that a smaller proportion of the rock has melted. Since mafic minerals, such as olivine and pyroxene, have higher melting points compared to felsic minerals like quartz and feldspar, less partial melting will leave behind a greater proportion of the mafic minerals. This leads to a decrease in the mafic component and an increase in the felsic component of the melt, resulting in a more felsic magma composition.

Learn more about partial melting here:

https://brainly.com/question/14277318

#SPJ11

Select one or more:
a)
Lightning can strike the surface of Earth but also travels from cloud to cloud.
b)
Supercells are favored by access to warm and moist air
c)
When it begins to rain in a thunderstorm, the storm begins its evolution towards dissipation.
d)
Electric charges are built up by movement of particles within the cloud
e)
Lightning heats the surrounding air to 8 000°C - 33 000°C
f)
None of the alternatives are true

Answers

Lightning can indeed strike the Earth's surface, but it can also occur as cloud-to-cloud lightning, were electrical discharges travel between different cloud formations.

b) Supercells, which are powerful and long-lasting thunderstorms, thrive when there is a supply of warm and moist air. These conditions provide the necessary instability for the formation of rotating updrafts within the storm system.

c) Rainfall in a thunderstorm is a sign that the storm is transitioning towards its dissipation phase. As the storm produces precipitation, it starts to deplete its available energy and eventually weakens.

d) Electric charges within a thunderstorm build up due to the movement of particles, including ice crystals, graupel (soft hail), and water droplets, within the storm cloud. This separation of charges creates the conditions necessary for lightning to occur.

e) Lightning bolts generate intense heat, reaching temperatures between 8,000°C and 33,000°C. This sudden heating of the surrounding air causes it to rapidly expand, creating the sound we hear as thunder.

Learn more about cloud-to-cloud lightning here

https://brainly.com/question/31442871

#SPJ11

privacy and data protection for delivery quiz infosys answers

Answers

Privacy and data protection are essential aspects when it comes to handling quiz information at Infosys.

Strict safeguards and robust security measures are implemented to ensure the confidentiality and integrity of the data. Personal information collected during the quiz is treated with utmost care and used solely for the intended purpose. Infosys follows industry best practices, complies with relevant privacy regulations, and maintains a strong data protection framework. Regular security audits and assessments are conducted to identify and address any potential vulnerabilities. Employees handling quiz information are bound by strict confidentiality agreements and access to data is limited to authorized personnel only. Overall, Infosys prioritizes privacy and data protection to safeguard the confidentiality of quiz information and maintain the trust of its participants.

Learn more about data protection here:

https://brainly.com/question/29790747

#SPJ11

The given question is incomplete. The complete question is:

What are some important considerations for privacy and data protection in the context of delivery?

what two countries have influenced and shaped the minangkabau culture

Answers

The Minangkabau culture is primarily found in the West Sumatra province of Indonesia. However, the culture has been influenced and shaped by two neighboring countries, Malaysia and India.

The influence of Malaysia can be seen in the similarities between Minangkabau and Malay cultures, such as the use of the Malay language, traditional clothing, and culinary practices. The Indian influence can be seen in the Minangkabau architecture and performing arts, which have been heavily influenced by Indian styles. Additionally, the Minangkabau people have a long history of trade with India, which has led to the exchange of ideas and cultural practices. The influence of both Malaysia and India has resulted in a unique and rich Minangkabau culture that has stood the test of time. In conclusion, the Minangkabau culture has been influenced by both Malaysia and India, and this has contributed to the unique cultural identity of the people in West Sumatra.

To know more about Minangkabau culture visit:

https://brainly.com/question/32372869

#SPJ11

globalization and its effects have been celebrated and decried but, irreversible, it continues to change our world and daily lives at breakneck speed. consider the following phrases or statements and determine whether each describes an effect of globalization. check all that apply. invention of the computer microprocessor potential for victimization of vulnerable groups decreased documentation of crime against women and girls dissemination of illegal goods and services

Answers

Globalization is a term used to describe the integration of different economies, societies, and cultures worldwide. The invention of the computer microprocessor is a direct result of globalization.

It has brought significant changes in the way we live, work, and communicate with each other. The microprocessor has made possible the development of modern technology, which has revolutionized various sectors of the economy, including healthcare, manufacturing, and finance. However, the potential for victimization of vulnerable groups has also increased with globalization. The spread of illegal goods and services has become easier, and documentation of crime against women and girls has decreased in some parts of the world. Despite these challenges, globalization has led to increased economic growth and development, improved living standards, and increased cultural exchange. In conclusion, globalization has both positive and negative effects, but it is an irreversible process that will continue to shape our world for years to come.

To know more about Globalization visit:

https://brainly.com/question/30331929

#SPJ11

many populated zones are coastal areas, where most people will concentrate in the future. densities in the coast can be the inland counties.

Answers

Answer:

The impact of hazardous coastal processes is considerable because many populated areas are located near the coast. In the United States, it is expected that most of the population will eventually be concentrated along the nation's 150,000 km.

Explanation:

Yes, it is true that many populated zones are located in coastal areas. The coastal regions offer several advantages such as access to marine resources, better trade opportunities, and a temperate climate. In addition, the coastal regions are attractive to people because of the scenic beauty and recreational opportunities that they offer.

As the population grows, it is expected that more people will move to these coastal areas, resulting in higher population densities. However, it is important to note that the population density in the coastal regions is not always higher than that of the inland counties. This is because many factors, such as economic opportunities and access to infrastructure, also play a role in determining population densities.

Yes, it is true that many populated zones are located in coastal areas. The coastal regions offer several advantages such as access to marine resources, better trade opportunities, and a temperate climate. In addition, the coastal regions are attractive to people because of the scenic beauty and recreational opportunities that they offer.

As the population grows, it is expected that more people will move to these coastal areas, resulting in higher population densities. However, it is important to note that the population density in the coastal regions is not always higher than that of the inland counties. This is because many factors, such as economic opportunities and access to infrastructure, also play a role in determining population densities.

Nevertheless, it is important to plan and manage the growth of coastal regions to ensure that the natural resources are conserved, and the quality of life is maintained for the people living in these areas. Proper planning and management can help to balance the needs of the people and the environment, ensuring a sustainable future for the coastal zones.

To know more about coastal visit:

https://brainly.com/question/32196789

#SPJ11

of the sedimentary rocks in our specimens were composed of sediments that most likely accumulated in a quiet, low energy water environment?

Answers

The sedimentary rocks in your specimens that are composed of sediments most likely accumulated in a quiet, low energy water environment are typically referred to as "fine-grained" sedimentary rocks. These rocks are characterized by their fine texture and lack of coarse grains or visible sedimentary structures.

Examples of sedimentary rocks that are commonly formed in quiet, low energy water environments include shale, siltstone, and mudstone. These rocks are typically composed of very fine particles, such as clay and silt, which settle slowly in calm water conditions.

In quiet water environments, the energy of the water is not sufficient to transport and deposit coarser sediments like sand or gravel. Instead, fine particles settle out of suspension and accumulate over time, forming the fine-grained sedimentary rocks mentioned above.

The presence of these fine-grained sedimentary rocks in your specimens suggests a depositional environment characterized by low energy, such as a lake, lagoon, or deep marine basin, where sedimentation occurs slowly and with minimal disturbance.

Learn more about sedimentary rocks here:

https://brainly.com/question/29771190

#SPJ11

Explain Mount Saint Helens..periodi include in your answer how magma is generated, compositions of magma/lava, type of volcano, eruptive style, volcanic products, and short/long term hazards. (

Answers

Mount St. Helens, located in Washington State, USA, is a stratovolcano that had a significant eruption in 1980.

Mount St. Helens is classified as a composite or stratovolcano, characterized by its steep, symmetrical cone shape formed by layers of lava, ash, and pyroclastic materials over time. The eruptive style of Mount St. Helens is explosive, marked by violent eruptions that release large amounts of gas and fragmented material.

During the 1980 eruption, Mount St. Helens produced a variety of volcanic products, including pyroclastic flows, ash clouds, and lahars (mudflows). In the short term, the eruption of Mount St. Helens resulted in the loss of human lives and destruction of infrastructure in the immediate vicinity. In the long term, Mount St. Helens continues to be an active volcano, with ongoing monitoring and potential future eruptions posing hazards to nearby communities, including ash fall, lahars, and pyroclastic flows.

Learn more about Mount St. Helens here:

https://brainly.com/question/1543785

#SPJ11

Knife-edge ridges caused when
several cirques form back to back are called:
Select one:
a)
Surge
b)
Arêtes
c)
Piedmont
d)
Cirque
e)
Striation
f)
Horn
g)
Tarn

Answers

The knife-edge ridges caused when several cirques form back to back are called arêtes.

An arête is a narrow, sharp-edged ridge that is formed by the erosion of cirques on opposite sides of a mountain or valley. When glaciers erode the slopes of a mountain, they carve out circular hollows called cirques. If multiple cirques form adjacent to each other, their ridges may merge, resulting in a distinct ridge with steep, serrated edges known as an arête. These knife-edge ridges can be quite dramatic and are often found in glaciated mountain regions.

The other options listed are not the specific term for knife-edge ridges formed by back-to-back cirques. A surge (a) refers to the rapid advance of a glacier, while piedmont (c) is a type of landform formed by the deposition of sediment at the base of a mountain. Cirque (d) refers to the bowl-shaped hollow carved by a glacier, striation (e) refers to grooves on rock surfaces caused by glacial erosion, horn (f) is a pointed mountain peak formed by the erosion of cirques from multiple sides, and tarn (g) is a small mountain lake formed in a cirque basin.

Learn more about arêtes visit:

brainly.com/question/13090266

#SPJ11

compare vegetation near the poles and vegetation near the equator

Answers

Vegetation near the poles and vegetation near the equator differ greatly due to the difference in climate and temperature. Near the poles, the temperature is much colder, and the growing season is shorter.

This results in fewer plant species that can survive in this harsh environment. The vegetation near the poles is usually small shrubs, mosses, and lichens. In contrast, vegetation near the equator is rich and diverse due to the warm and humid climate. The equatorial regions receive abundant rainfall throughout the year, making it possible for various plant species to thrive in these regions. Forests dominate the vegetation near the equator, including tropical rainforests, mangrove forests, and savannas. In summary, while the vegetation near the poles is sparse and limited, the vegetation near the equator is diverse and abundant due to the favorable climate conditions.

To know more about temperature visit:

https://brainly.com/question/7510619

#SPJ11

where was the above photograph taken? a. arizona b. colorado c. utah d. nevada please select the best answer from the choices provided a b c d

Answers

To answer your question, I would need to know which photograph you are referring to. However, I can give you a general answer on how to identify the location of a photograph. To determine where a photograph was taken, you can look for clues in the background such as landmarks, unique landscapes, and architecture.

You can also analyze the lighting and weather conditions to narrow down the location. Additionally, you can try using reverse image search tools on search engines to find similar images that are labeled with the location. It's essential to note that not all photographs may have identifiable information, and in some cases, you may need to ask the photographer or the person who shared the photo for more information. I hope this answer helps you, and please let me know if you have any further questions.

To know more about architecture visit:

https://brainly.com/question/29649525

#SPJ11

these are cumuliform clouds that are found between warm and cold fronts, usually indicating that a thunderstorm is close by.[ choose ]these are mid-level stratus clouds which look like a solid, gray sky, and are usually followed by continuous rain.[ choose ]these are cloud formations which are lens-shaped, and are formed when stable air moves fast over a mountain.[ choose ]

Answers

These are cumuliform clouds that are found between warm and cold fronts, usually indicating that a thunderstorm is close by.

When warm air is pushed upward by heavy cold air, a cold front forms. The majority of clouds produced by cold fronts are cumuliform clouds. These clouds frequently develop into cumulonimbus clouds, which cause thunderstorms. Nimbostratus, stratocumulus, and stratus clouds can all develop in response to cold fronts.

Cumulus clouds are lumpy, billowy clouds that are produced by vertical currents in unstable air. Cumulus means pile or heap. The term "stratus" refers to clouds that have formed as a result of the cooling of a stable layer and are defined as being stratified or layered.

Learn more about cumuliform clouds here:

https://brainly.com/question/31929072

#SPJ1

Scientists evaluating the Cretaceous mass extinctions have concluded that: A. many factors, including climate change, volcanic activity, and an extraterrestrial impact, may have played a role. B. only an extraterrestrial impact could have caused such a big extinction event. C. climate change could not have been involved in producing the extinctions. D. there is no evidence of increased volcanic activity during the late Cretaceous. E. ecological factors such as disease and competition probably caused the dinosaurs to go extinct.

Answers

Scientists evaluating the Cretaceous mass extinctions have concluded that many factors, including climate change, volcanic activity, and an extraterrestrial impact, may have played a role.

This event occurred approximately 66 million years ago and led to the extinction of more than three-quarters of plant and animal species on Earth, including the dinosaurs. The leading theory is that an extraterrestrial impact, such as a comet or asteroid, caused widespread devastation and triggered a global climate change. However, recent studies have also shown that volcanic activity and other ecological factors could have contributed to the extinction. While there is no clear consensus on the exact cause of the Cretaceous mass extinctions, scientists continue to study this event to gain a better understanding of the complex interactions between biological, geological, and environmental factors. Overall, it is clear that this event had a profound impact on the history of life on Earth and has important implications for our understanding of the evolution of our planet.

To know more about Cretaceous mass visit:

https://brainly.com/question/29737691

#SPJ11

An igneous rock contains 10 grams of radioactive potassium-40 and 5 grams of its daughter product argon-40. Calculate the percents of parent and daughter in the rock. Has 1 half-life elapsed?

Answers

To calculate the percents of parent and daughter in the igneous rock, we need to first find the total amount of potassium-40 that was originally in the rock. Since potassium-40 is a radioactive isotope, we know that it decays into argon-40 over time. The half-life of potassium-40 is 1.3 billion years.


Since we have 10 grams of potassium-40 and 5 grams of argon-40, we can assume that half of the original potassium-40 has decayed into argon-40. Therefore, we can calculate that there were originally 20 grams of potassium-40 in the rock.
To find the percent of parent in the rock, we divide the remaining amount of potassium-40 (10 grams) by the original amount (20 grams) and multiply by 100. This gives us 50% parent.
To find the percent of daughter in the rock, we divide the amount of argon-40 (5 grams) by the original amount of potassium-40 (20 grams) and multiply by 100. This gives us 25% daughter.
Based on these calculations, we can see that 1 half-life has elapsed for the potassium-40 in this igneous rock.

To know more about igneous rock visit:

https://brainly.com/question/2500550

#SPJ11

how would you describe the land in the grassland ecosystem? how do you think this contour affects the ecosystem?

Answers

The land in a grassland ecosystem is characterized by vast expanses of open, flat or gently rolling terrain with predominantly grasses as the dominant vegetation. Grasslands typically have fertile soils that support the growth of a diverse range of grass species. The absence or sparse distribution of trees is a distinguishing feature of grasslands.

The contour or topography of the land in a grassland ecosystem plays a significant role in shaping the ecosystem. Flat or gently rolling terrain allows for the efficient drainage of water, preventing waterlogging and creating favorable conditions for grass growth. It also promotes the movement of animals across the landscape.

The contour affects the distribution of water within the ecosystem, influencing factors such as water availability, runoff patterns, and soil moisture. In areas with slight slopes, water may drain more evenly, preventing the formation of stagnant pools and promoting plant growth. On steeper slopes, water runoff may be faster, leading to erosion and altered soil moisture conditions.

The topography of grassland landscapes can create microhabitats with varying moisture levels, which can support different plant and animal species. For example, depressions or low-lying areas may retain water longer, creating wetter conditions that favor the growth of specific wetland plants or provide habitat for amphibians.

Furthermore, the contour of the land affects factors such as wind exposure and sunlight distribution, which in turn influence plant growth and animal behavior. Sheltered areas may support different plant communities compared to more exposed areas.

Learn more about grassland ecosystems here:

https://brainly.com/question/28962593

#SPJ11

label different features of the greenhouse effect on earth. ainfrared radiation reradiated back to ground binfrared radiation radiated from ground into the atmosphere cradiation from the sun heating the ground dinfrared radiation escaping into space

Answers

The greenhouse effect is a natural process that keeps the Earth's atmosphere warm enough to support life. It occurs when gases in the atmosphere trap heat from the sun, which warms the Earth's surface. There are several features that contribute to the greenhouse effect on Earth.


The first feature is infrared radiation that is reradiated back to the ground. This occurs when heat energy from the sun enters the Earth's atmosphere and warms the surface. The surface then releases some of this heat energy back into the atmosphere in the form of infrared radiation. This radiation is then trapped by greenhouse gases in the atmosphere, which keep the heat close to the Earth's surface.
The second feature is infrared radiation that is radiated from the ground into the atmosphere. This occurs when heat energy from the Earth's surface is released into the atmosphere in the form of infrared radiation. This radiation is then trapped by greenhouse gases, which keep the heat close to the Earth's surface.
The third feature is radiation from the sun heating the ground. This occurs when the sun's rays heat the Earth's surface, which then releases heat energy back into the atmosphere in the form of infrared radiation.
Finally, there is infrared radiation escaping into space. This occurs when heat energy from the Earth's surface is released into the atmosphere and escapes into space in the form of infrared radiation. This radiation is not trapped by greenhouse gases and therefore does not contribute to the greenhouse effect.
Overall, the greenhouse effect is a complex process that involves several features, including infrared radiation from the sun and the Earth's surface, greenhouse gases in the atmosphere, and the escape of heat energy into space.

To know more about greenhouse effect visit:

https://brainly.com/question/31595505

#SPJ11

Choose all of the features involved in the cleanup of polluted groundwater at the Rocky Mountain Arsenel.
o Groundwater extraction and onsite treatment
o A physical barrier to groundwater flow
o Reinjection of cleaned water into the aquifer

Answers

The cleanup of polluted groundwater at the Rocky Mountain Arsenal involved multiple features. The site was heavily contaminated due to decades of manufacturing chemicals and munitions. One of the primary methods used to remediate the site was groundwater extraction and onsite treatment. This process involved pumping water from the contaminated areas and treating it on-site through a series of physical and chemical processes. The cleaned water was then either discharged into nearby surface water bodies or re-injected back into the aquifer. Another feature used at the site was the installation of a physical barrier to groundwater flow.

The cleanup of polluted groundwater at the Rocky Mountain Arsenal involved multiple features. The site was heavily contaminated due to decades of manufacturing chemicals and munitions. One of the primary methods used to remediate the site was groundwater extraction and onsite treatment. This process involved pumping water from the contaminated areas and treating it on-site through a series of physical and chemical processes. The cleaned water was then either discharged into nearby surface water bodies or re-injected back into the aquifer. Another feature used at the site was the installation of a physical barrier to groundwater flow. This helped prevent contaminated water from migrating to other areas. Overall, the cleanup of polluted groundwater at the Rocky Mountain Arsenal was a complex process that required multiple features and years of work to address the site's extensive contamination.

To know more about groundwater visit:

https://brainly.com/question/22109774

#SPJ11

put the following stages of an intense tropical cyclone in the north atlantic ocean in order, from formation to maximum strength:question 14 options:tropical depressioneasterly wavetropical stormhurricane

Answers

The stages of an intense tropical cyclone in the North Atlantic Ocean, from formation to maximum strength, typically follow a pattern. First, an easterly wave or disturbance occurs in the atmosphere over the ocean. This can trigger the formation of a tropical depression, which is characterized by thunderstorms and low pressure. As the depression grows stronger, it can evolve into a tropical storm, with stronger winds and more organized circulation. Finally, if conditions are favorable, the storm can intensify further and become a hurricane, with winds exceeding 74 miles per hour.

The stages of an intense tropical cyclone in the North Atlantic Ocean, from formation to maximum strength, typically follow a pattern. First, an easterly wave or disturbance occurs in the atmosphere over the ocean. This can trigger the formation of a tropical depression, which is characterized by thunderstorms and low pressure. As the depression grows stronger, it can evolve into a tropical storm, with stronger winds and more organized circulation. Finally, if conditions are favorable, the storm can intensify further and become a hurricane, with winds exceeding 74 miles per hour.

It's worth noting that not all tropical depressions and storms become hurricanes, and not all hurricanes reach maximum strength. However, when they do, they can be incredibly destructive and pose a serious threat to coastal communities. It's important for people living in hurricane-prone areas to stay informed and prepared for potential storms, as early warnings and evacuation plans can save lives.

To know more about cyclone visit:

https://brainly.com/question/32120784

#SPJ11

true or false: more than a dozen or so small sized earthquakes occurring over a very short time-period usually means a large earthquake is about to occur.

Answers

False. While it is true that an increase in small-sized earthquakes can sometimes be a precursor to a larger earthquake, it is not always the case.

It is important to note that earthquakes are complex events that are difficult to predict with certainty. While scientists can monitor seismic activity and identify patterns, there is no foolproof method for predicting when an earthquake will occur. It is also worth noting that the definition of "short time-period" can vary depending on the context. In general, it is best to rely on the guidance of trained professionals and to be prepared for earthquakes at all times, rather than trying to predict them based on small-scale activity. In conclusion, the statement is false and it is important to take earthquake preparedness seriously regardless of seismic activity.

To know more about earthquakes visit:

https://brainly.com/question/29500066

#SPJ11

Which situation does not fall under Environmental Justice?
A. energy vulnerability
B. food waste, scarcity, and security
C. access to green space to all populations
• D. the disproportionate impact of climate change on marginalized populations

Answers

C. Access to green space for all populations does not fall under Environmental Justice.

Environmental Justice primarily focuses on addressing the disproportionate burdens of environmental hazards and pollution on marginalized communities, ensuring fair treatment and involvement in environmental decision-making processes, and promoting equitable access to environmental benefits and resources.

Energy vulnerability, food waste, scarcity, and security, as well as the disproportionate impact of climate change on marginalized populations, are all examples that fall under the scope of Environmental Justice. These issues highlight the unequal distribution of environmental risks, resources, and impacts on different social groups, particularly those who have historically faced systemic disadvantages and discrimination.

Learn more about Environmental Justice here:

https://brainly.com/question/17439391

#SPJ11

In four sentences or less, briefly explain the difference
between breaking waves from arriving swell and breaking waves from
local wind generation?

Answers

Breaking waves from arriving swell are generated by distant storms or weather systems and travel long distances across the ocean before reaching the coastline.

These waves have longer wavelengths and are more organized and uniform in shape. On the other hand, breaking waves from local wind generation are created by wind blowing over the immediate area and generating waves on the spot. These waves tend to be choppier, shorter in wavelength, and more irregular in shape compared to swell waves. Local wind generation refers to the process where wind blowing over a specific area creates waves on the spot. It occurs when the wind interacts with the water surface, transferring energy and causing the formation of waves.

Learn more about coastline link:

https://brainly.com/question/31443316

#SPJ11

which region of north america is most vulnerable to desertification

Answers

Desertification is a process where fertile land turns into desert due to various factors such as climate change, deforestation, and unsustainable agriculture practices.

In North America, the region most vulnerable to desertification is the southwestern United States, particularly Arizona, New Mexico, and Texas. These states have a hot and arid climate, with limited water resources and high evaporation rates, making it difficult to sustain agriculture and other human activities. Furthermore, the region is experiencing a prolonged drought, which exacerbates the problem of desertification. To mitigate the impact of desertification, there are efforts to conserve water, promote sustainable agriculture practices, and restore degraded lands. It is essential to address the issue of desertification in the southwestern United States and other vulnerable regions to ensure the sustainability of human activities and protect the environment.
In conclusion, the southwestern United States is the region of North America most vulnerable to desertification due to its arid climate, limited water resources, and prolonged drought. Efforts to conserve water, promote sustainable agriculture practices, and restore degraded lands are essential to mitigate the impact of desertification and ensure the sustainability of human activities in the region.

To know more about Desertification visit:

https://brainly.com/question/2749708

#SPJ11

who is generally recognized as the founder of american psychology

Answers

William James is generally recognized as the founder of American psychology.

He was an influential philosopher and psychologist who made significant contributions to the field. James is known for his work in pragmatism and his influential book "The Principles of Psychology," which is considered a foundational text in psychology. He established the first psychology laboratory in the United States at Harvard University and played a crucial role in establishing psychology as a distinct discipline in America. James's emphasis on the study of consciousness and the application of psychology to practical problems helped shape the early development of American psychology.

Learn more about early development here:

brainly.com/question/28668511

#SPJ11

Other Questions
Find the perimeter and area of the shaded figure below find the perimeter and area of the regular polygon.(do not round until the final answer order, then round to the nearest tenth as needed). Given the demand function D(p) = 200 - 3p?, ( - Find the Elasticity of Demand at a price of $5 At this price, we would say the demand is: Elastic O Inelastic Unitary Based on this, to increase revenue Which of the following expressions returns true? i. true and false ii. not(true or false) iii. false or (true or false) a) i only b) ii onlyc) iii only d) i and ii Suppose a person is invited to pay $1,000 for a coin tossing game in which if head is tossed, the person will get back $2,000 while if tail is tossed, the person will get nothing. The coin is assured to be fair. Required: Applying the investment utility equation together with the expected return and the risk in this game, determine the decision with explanation of the person if the person is: i) risk averse, ii) risk neutral, and iii) risk lover. 3. Dynamic IS-MP-AS: For this exercise you will need to download the spreadsheet IS MP AS.Q2.xlsx. (a) Simulate a supply shock by changing the "bar o" cell from zero to one. De- scribe the effect of t TRUE / FALSE. the gray rami communicantes consist of myelinated postganglionic fibers. national opinion polls tend to use sample size ranging from: a. 10 t0 100 b. 1,000 t0 1,200 c. 50,000 t0 100,000 d. 1 million to 5 million. Find the volume of the following shape.7 km5 km1.9 km3 km3 kmRound to the nearest hundredth. 4. A tank in the shape of a right circular cone is full of water. If the height of the tank is 6 meters and the radius of its top is 1.5 meters, find the work done in pumping all the water over the edge of the tank family therapy gained its initial legitimacy during the 1950's by A chemist makes 340. mL of potassium dichromate (K2Cr2O7) working solution by adding distilled water to 40.0 mL of a 0.479 M stock solution of potassium dichromate in water.Calculate the concentration of the chemist's working solution. Be sure your answer has the correct number of significant digits. Which statement below accurately describes the contributions of Democritus?A) ancient Greek philosopher who proposed that matter was not continuousB) created the modern periodic tableC) proposed the modern Atomic TheoryD) discovered the existence of electronsE) none of the above Find the slope of the polar curve at the indicated point. 59) r=6(1 + coso), o = pie/4 (b) (2 points) Find the curl of F(x, y, z) = (x^y, yz?, zx2) (c) (2 points) Determine if F = r+ y ln x is conservative (d) (2 points) Find the divergence of F = (ez?, 2y +sin (z2z), 4z + V x2 +9y2 What interest payment is exceeded by only 18% of the bank's Visa cardholders? Use algebraic techniques to rewrite y = ri(-5.1 8x + + 7). y - as a sum or difference; then find y Answer 5 Points y = In a previous assignment, you created a set class which could store numbers. This class, called ArrayNumSet, implemented the NumSet interface. In this project, you will implement the NumSet interface for a hash-table based set class, called HashNumSet. Your HashNumSet class, as it implements NumSet, will be generic, and able to store objects of type Number or any child type of Number (such as Integer, Double, etc).Notice that the NumSet interface is missing a declaration for the get method. This method is typically used for lists, and made sense in the context of our ArrayNumSet implementation. Here though, because we are hashing elements to get array indices, having a method take an array index as a parameter is not intuitive. Indeed, Java's Set interface does not have it, so it's been removed here as well.The hash table for your set implementation will be a primitive array, and you will use the chaining method to resolve collisions. Each chain will be represented as a linked list, and the node class, ListNode, is given for you. Any additional methods you need to work with objects of ListNode you need to implement in your HashNumSet class.You'll need to write a hash function which computes the index in an array which an element can go / be looked up from. One way to do this is to create a private method in your HashNumSet class called hash like so:private int hash(Number element)This method will compute an index in the array corresponding to the given element. When we say we are going to 'hash an element', we mean computing the index in the array where that element belongs. Use the element's hash code and the length of the array in which you want to compute the index from. You must use the modulo operator (%).The hash method declaration given above takes a single parameter, the element, as a Number instead of E (the generic type parameter defined in NumSet). This is done to avoid any casting to E, for example if the element being passed to the method is retrieved from the array.When the number of elements in your array (total elements among all linked lists) becomes greater than 75% of the capacity, resize the array by doubling it. This is called a load factor, and here we will define it as num_elements / capacity, in which num_elements is the current number of elements in your array (what size() returns), and capacity is the current length of your array (what capacity() returns).Whenever you resize your array, you need to rehash all the elements currently in your set. This is required as your hash function is dependent on the size of the array, and increasing its size will affect which indices in the array your elements hash to. Hint: when you copy your elements to the new array of 2X size, hash each element during the copy so you will know which index to put each one.Be sure to resize your array as soon as the load factor becomes greater than 75%. This means you should probably check your load factor immediately after adding an element.Do not use any built-in array copy methods from Java.Your HashNumSet constructor will take a single argument for the initial capacity of the array. You will take this capacity value and use it to create an array in which the size (length) is the capacity. Then when you need to resize the array (ie, create a new one to replace the old one), the size of the new array will be double the size of the old one.null values are not supported, and a NullPointerException should be thrown whenever a null element is passed into add/contains/remove methods.Example input / outputYour program is really a class, HashNumSet, which will be instantiated once per test case and various methods called to check how your program is performing. For example, suppose your HashNumSet class is instantiated as an object called numSet holding type Integer and with initialCapacity = 2:NumSet numSet = new HashNumSet(2);Three integers are added to your set:numSet.add(5);numSet.add(3);numSet.add(7);Then your size() method is called:numSet.size();It should return 3, the number of elements in the set. Your capacity() method is called:numSet.capacity();It should return 4, the length of the primitive array. Now add another element:numSet.add(12);Now if you call numSet.size() and numSet.capacity(), you should get 4 and 8 returned, respectively. Finally, lets remove an element:numSet.remove(3);Now if you call numSet.size() and numSet.capacity(), you should get 3 and 8 returned, respectively. The test cases each have a description of what each one will be testing. What type of sensor detects presence by generating an electrostatic field, and detecting changes in this field by a target approaching? A. Background suppression sensor B. Capacitive proximity sensor C. Limit switch D. Retroreflective sensor For ATCase, why does the vo vs. [aspartate] curve sigmoidal rather than hyperbolic?A) It is because of the positive cooperativityB) It is because the catalytic dimers switch between T and R statesC) It is because the kcat value is sigmoidalD) More than one answerE) none of the above