Designing a Silo
As an employee of the architectural firm of Brown and Farmer, you have been asked to design a silo to stand adjacent to an existing barn on the campus of the local community college. You are charged with finding the dimensions of the least expensive silo that meets the following specifications.

The silo will be made in the form of a right circular cylinder surmounted by a hemi-spherical dome.
It will stand on a circular concrete base that has a radius 1 foot larger than that of the cylinder.
The dome is to be made of galvanized sheet metal, the cylinder of pest-resistant lumber.
The cylindrical portion of the silo must hold 1000π cubic feet of grain.
Estimates for material and construction costs are as indicated in the diagram below.



The ultimate proportions of the silo will be determined by your computations. In order to provide the needed capacity, a relatively short silo would need to be fairly wide. A taller silo, on the other hand, could be rather narrow and still hold the necessary amount of grain. Thus there is an inverse relationship between r, the radius, and h, the height of the cylinder.

Part A
Suppose the cylinder has a radius of r. What would be the surface area of the hemi-spherical dome? The construction cost for the metal dome is estimated at $30 per square foot. Write an expression for the estimated cost of the dome.

Surface area of dome = ____________________

Cost of dome = ____________________

The value of x in the given figures are 2.73 and 6 by using proportional equation.

Let us for x by forming a proportional equation.

36.4/x=28/(49-28)

36.4/x=28/21

Apply cross multiplication:

21×36.4=28x

764.4=28x

Divide both sides by 28:

x=76.4/28

x=2.73

So the value of x is 2.73.

27/21=x-1/x+1

27(x+1)=21(x-1)

27x+27=21x-21

Take the variable terms on one side and constants on other side.

6x=-48

x=8

To learn more on Equation:

https://brainly.com/question/10413253

#SPJ1

To find the area bounded by the curves x = -y^2 + 4y, we first need to determine the intersection points of the curves. Setting the equations equal to each other:

-y^2 + 4y = x

Rearranging the equation:

y^2 - 4y + x = 0

This is a quadratic equation in y. To find the intersection points, we need to solve this equation.

Using the quadratic formula:

y = (-(-4) ± √((-4)^2 - 4(1)(x))) / (2(1))

Simplifying: y = (4 ± √(16 - 4x)) / 2

y = (4 ± √(16 - 4x)) / 2

y = 2 ± √(4 - x)

This gives us two possible values for y at each x.

Learn more about quadratic equation here: brainly.com/question/30176832

#SPJ11

The amplitude of the function f(x) = 2 sin(x - π/3) is 2, indicating that the graph oscillates between a maximum value of 2 and a minimum value of -2.

In the given function f(x) = 2 sin(x - π/3), the exact maximum and minimum y-values can be determined by considering the amplitude and midline. The amplitude of the function is 2, which represents the maximum displacement from the midline. Since the midline is y = 0, the maximum y-value will be 2 units above the midline, and the minimum y-value will be 2 units below the midline.

To find the corresponding x-values, we can determine the points where the function reaches its maximum and minimum values. The maximum value occurs when the sine function is equal to 1, which happens when x - π/3 = π/2. Solving for x, we get x = 5π/6. Similarly, the minimum value occurs when the sine function is equal to -1, which happens when x - π/3 = 3π/2. Solving for x, we get x = 11π/6.

Therefore, the exact maximum y-value is 2 and its corresponding x-value is 5π/6, while the exact minimum y-value is -2 and its corresponding x-value is 11π/6.

Learn more about Amplitude : brainly.com/question/28972285
#SPJ11

Answer:

The product of a term that oscillates between positive and negative values and a term that approaches 0 results in a sequence that oscillates around 0, we can conclude that the given sequence is convergent and its limit is 0.Therefore, the answer is: lim(n → ∞) (-1)^n * sin(5/n) = 0.

Step-by-step explanation:

To determine whether the given sequence is divergent or convergent, we need to evaluate the limit of the sequence.

The given sequence is defined as:

lim(n → ∞) (-1)^n * sin(5/n)

As n approaches infinity, we can see that the term (-1)^n oscillates between positive and negative values. Additionally, the term sin(5/n) approaches 0 as n gets larger because the argument of the sine function, 5/n, approaches 0.

Since the product of a term that oscillates between positive and negative values and a term that approaches 0 results in a sequence that oscillates around 0, we can conclude that the given sequence is convergent and its limit is 0.

Therefore, the answer is: lim(n → ∞) (-1)^n * sin(5/n) = 0.

Learn more about convergent and divergent:https://brainly.com/question/15415793

#SPJ11

The equation [tex]x^2 - 16x + 10[/tex] = 0 has the same solution as the equation [tex](x - 8)^2 = -26.[/tex]

The equation [tex]x^{2}[/tex] - 16x + 10 = 0 can be rewritten as [tex](x - 8)^2[/tex]- 54 = 0 by completing the square. This new equation, [tex](x - 8)^2[/tex] - 54 = 0, has the same solution as the original equation.

By completing the square, we transform the quadratic equation into a perfect square trinomial. The term [tex](x - 8)^2[/tex] represents the square of the difference between x and 8, which is equivalent to [tex]x^{2}[/tex] - 16x + 64. However, since we subtracted 54 from the original equation, we need to subtract 54 from the perfect square trinomial as well.

The equation [tex](x - 8)^2[/tex]- 54 = 0 is equivalent to [tex]x^{2}[/tex] - 16x + 10 = 0 in terms of their solutions. Both equations represent the same set of values for x that satisfy the given quadratic equation.

Therefore, the equation [tex](x - 8)^2[/tex] - 54 = 0 has the same solution as the equation [tex]x^{2}[/tex] - 16x + 10 = 0, providing an alternative form to represent the solutions of the original equation.

Learn more about quadratic equation here:

https://brainly.com/question/22364785

#SPJ11

The derivative of f(x) = 3x + 1 at x = 8 is 3.

To find the derivative of f(x) = 3x + 1 at x = 8 using the definition of the derivative, we will apply the formula:

f'(a) = lim(h->0) [f(a + h) - f(a)] / h

In this case, a = 8, so we have:

f'(8) = lim(h->0) [f(8 + h) - f(8)] / h

Substituting the function f(x) = 3x + 1, we get:

f'(8) = lim(h->0) [(3(8 + h) + 1) - (3(8) + 1)] / h

Simplifying the expression inside the limit:

f'(8) = lim(h->0) [(24 + 3h + 1) - (24 + 1)] / h

= lim(h->0) (3h) / h

Canceling out the h in the numerator and denominator:

f'(8) = lim(h->0) 3

Since the limit of a constant value is equal to the constant itself, we have:

f'(8) = 3

Therefore, the derivative of f(x) = 3x + 1 at x = 8 is 3.

To know more about derivatives click on below link :

https://brainly.com/question/29144258#

#SPJ11

Out of the six assertions provided, only two of them are legitimate statistical hypotheses: (b) H: x = 45 and (e) H: X – Y = 5. The other assertions (a, c, d, and f) are not legitimate statistical hypotheses due to various reasons, such as incorrect notation or lack of clarity in defining the hypothesis.

b. H: x = 45: This is a legitimate statistical hypothesis because it states that the population mean, denoted by 'x', is equal to a specific value, 45. It follows the standard format of a statistical hypothesis.

e. H: X – Y = 5: This is also a legitimate statistical hypothesis as it compares the difference between two population means, X and Y, and states that their difference is equal to 5.

a. H: o > 100: This assertion is not a legitimate statistical hypothesis because 'o' is typically used to represent a population standard deviation, not an inequality. To form a valid hypothesis, it should specify a population parameter to be tested.

c. H: ss.20: This assertion is not a legitimate statistical hypothesis because 'ss' is not a standard statistical notation. A proper hypothesis would define a population parameter and state a specific value or inequality to be tested.

d. H: o l0, < 1: Similar to the first assertion, 'o' is used incorrectly here, and the notation is unclear. It does not follow the standard format of a statistical hypothesis.

f. H: A< .01, where A is the parameter of an exponential distribution used to model component lifetime: This assertion is not a legitimate statistical hypothesis as it uses 'A' to represent a parameter without explicitly defining it. A valid hypothesis should clearly state the population parameter being tested.

Learn more about legitimate statistical hypothesis here:

https://brainly.com/question/31494403

#SPJ11

The equation of the tangent to the curve y = 5x at x = 4 can be found by taking the derivative of the function with respect to x and evaluating it at x = 4. The derivative will give us the slope of the tangent line, and we can then use the point-slope form of a line to find the equation.

First, we find the derivative of y = 5x:

dy/dx = 5

The derivative of a constant multiplied by x is just the constant itself, so the slope of the tangent line is 5.

Next, we use the point-slope form of a line, which is y - y1 = m(x - x1), where (x1, y1) is a point on the line and m is the slope. We substitute x1 = 4, y1 = 5, and m = 5 into the equation:

y - 5 = 5(x - 4)

Simplifying the equation gives us the equation of the tangent line:

y = 5x - 15

To find the equation of the tangent line, we need to determine its slope and a point on the line. The slope can be obtained by taking the derivative of the given function, which represents the rate of change of y with respect to x. Substituting the given x-coordinate (in this case, x = 4) into the derivative will give us the slope of the tangent line. With the slope and a point on the line, we can use the point-slope form to derive the equation of the tangent line.

To learn more about tangent line click here : brainly.com/question/31617205

#SPJ11

The vector equation for the line of intersection of the planes x - y + 4z = 1 and x + 3z = 5 is r = (5, 4, 0) + t(12, -1, 1).

To find the vector equation for the line of intersection of the planes x − y + 4z = 1 and x + 3z = 5, follow these steps:

Step 1: Find the direction vector of the line of intersection by taking the cross product of the normal vectors of the two planes. The normal vectors are given by (1, -1, 4) and (1, 0, 3) respectively.

(1,-1,4) xx (1,0,3) = i(12) - j(1) + k(1) = (12,-1,1)

Therefore, the direction vector of the line of intersection is d = (12, -1, 1).

Step 2: Find a point on the line of intersection. Let z = t. Substituting this into the equation of the second plane, we have:

x + 3z = 5x + 3t = 5x = 5 - 3t

Substituting this into the equation of the first plane, we have: x - y + 4z = 1, 5 - 3t - y + 4t = 1, y = 4t + 4

Therefore, a point on the line of intersection is (5 - 3t, 4t + 4, t). Let t = 0.

This gives us the point (5, 4, 0).

Step 3: Write the vector equation of the line of intersection.

Using the point (5, 4, 0) and the direction vector d = (12, -1, 1), the vector equation of the line of intersection is:

r = (5, 4, 0) + t(12, -1, 1)

To learn more about vector click here https://brainly.com/question/24256726

#SPJ11

The point on the line y = 4x + 1 that is closest to the point (2, 5) is approximately (18/17, 89/17).

To find the point on the line y = 4x + 1 that is closest to the point (2, 5), we can use the concept of perpendicular distance.

Let's consider a point (x, y) on the line y = 4x + 1. The distance between this point and the point (2, 5) can be represented as the length of the line segment connecting them.

The equation of the line segment can be written as:

d = sqrt((x - 2)^2 + (y - 5)^2)

To find the point on the line that minimizes this distance, we need to minimize the value of d. Instead of minimizing d directly, we can minimize the square of the distance to simplify the calculations.

So, we minimize:

d^2 = (x - 2)^2 + (y - 5)^2

Now, substitute y = 4x + 1 into the equation:

d^2 = (x - 2)^2 + ((4x + 1) - 5)^2

= (x - 2)^2 + (4x - 4)^2

= x^2 - 4x + 4 + 16x^2 - 32x + 16

= 17x^2 - 36x + 20

To find the minimum point, we take the derivative of d^2 with respect to x and set it equal to zero:

d^2' = 34x - 36 = 0

34x = 36

x = 36/34

x = 18/17

Now, substitute this value of x back into y = 4x + 1 to find the corresponding y-coordinate:

y = 4(18/17) + 1

y = 72/17 + 1

y = (72 + 17) / 17

y = 89/17

Learn more about The point here:

https://brainly.com/question/24226752

#SPJ11

The integral of 7cos(x)ln(sin(x)) dx evaluated from 0 is -7πln(2).

To evaluate the integral ∫ 7cos(x)ln(sin(x)) dx from 0, we first apply the integration by parts method. By selecting u = ln(sin(x)) and dv = 7cos(x) dx, we differentiate u and integrate dv to obtain du = (1/sin(x))cos(x) dx and v = 7sin(x), respectively.

Using the integration by parts formula ∫ u dv = uv - ∫ v du, we can calculate the integral:

∫ 7cos(x)ln(sin(x)) dx = 7sin(x)ln(sin(x)) - ∫ 7sin(x)(1/sin(x))cos(x) dx

= 7sin(x)ln(sin(x)) - 7∫ cos(x) dx

= 7sin(x)ln(sin(x)) - 7sin(x) + C

Now we substitute the limits of integration:

∫[0] 7cos(x)ln(sin(x)) dx = [7sin(x)ln(sin(x)) - 7sin(x)]|[0]

= 7sin(0)ln(sin(0)) - 7sin(0) - (7sin(π)ln(sin(π)) - 7sin(π))

= 0 - 0 - (0 - 0)

= -7πln(2)

learn more about Integral here:

https://brainly.com/question/18125359

#SPJ4

The series (-1)^n cos(n) does not converge.

To determine whether the series converges or diverges, we need to analyze the behavior of the individual terms as n approaches infinity.

For the given series, the term (-1)^n cos(n) oscillates between positive and negative values as n increases. The cosine function oscillates between -1 and 1, and multiplying it by (-1)^n alternates the sign of the term.

Since the series oscillates and does not approach a specific value as n increases, it does not converge. Instead, it diverges.

In the case of oscillating series, convergence can be determined by examining whether the terms approach zero as n approaches infinity. However, in this series, the absolute value of the terms does not approach zero since the cosine function is bounded between -1 and 1. Therefore, the series diverges.

In conclusion, the series (-1)^n cos(n) diverges.

learn more about function oscillation here:

https://brainly.com/question/30763887

#SPJ11

The swimming team will stay at a distance of 25m

Distance is the measurement of how far apart objects or points are. It is measured in meters, feet or other units of measurement.

If the swimming team moved forward 60m and backed up 20m.

The net forward movement will be:

60m - 20m = 40m.

If they then backed down 15m. Thus, their final distance will be:

40m - 15m = 25m.

Learn more about distance on:

https://brainly.com/question/26046491

#SPJ1

Question in English

A swimming team moved forward 60m and backed up 20m, then backed down 15m.

At what meter (distance) did they stay?

The number of ways to select 3 pages in ascending index order depends on the total number of pages available.

To find the number of ways to select 3 pages in ascending index order, we can use the concept of combinations . In combinatorics, selecting objects in a specific order is often referred to as permutations. However, since the order does not matter in this case, we need to consider combinations instead.

The number of ways to select 3 pages in ascending index order can be calculated using the combination formula. Since we are selecting from a set of pages, without replacement and order doesn't matter, we can use the formula C(n, k) = n! / (k!  (n-k)!), where n is the total number of pages and k is the number of pages we want to select.

Learn more about combination formula here:

https://brainly.com/question/13090387

#SPJ11

The estimated rate of oil production from the field is given by [tex]R(t) = 0.1t^2 + 2t + 100 for 0 < t < 30.[/tex]

The oil company's management used data from the first three years of production to estimate the oil production rate.

The function R(t) represents the rate of oil pumped in thousands of barrels per year. The formula is a quadratic equation, where t represents the number of years since production started. The coefficient values 0.1, 2, and 100 determine the shape and trend of the production curve. The equation indicates that the oil production rate gradually increases over time, with an initial rate of 100 and additional growth provided by the quadratic term. The estimated production rate is valid for the first 30 years of oil production.

Learn more about quadratic equation here:

https://brainly.com/question/30098550

#SPJ11

The expression for ∂z/∂t using the chain rule will have four terms.

According to the chain rule, we have:
∂z/∂t = (∂z/∂u) * (∂u/∂t) + (∂z/∂v) * (∂v/∂t) + (∂z/∂s) * (∂y/∂t) + (∂z/∂s) * (∂y/∂s)
Each of these components represents one term, so there are four terms in total. Your answer: Four terms.

To know more about chain visit:

https://brainly.com/question/10469579

#SPJ11

Using left and right endpoints, we can approximate the area of the region between the graph of the function f(x) = 2x - x² - 1 and the x-axis over the interval [0, x]. By dividing the interval into subintervals and evaluating the function at either the left or right endpoint of each subinterval, we can calculate the areas of the corresponding rectangles. Summing up these areas gives us two approximations of the total area.

To approximate the area using left endpoints, we divide the interval [0, x] into n subintervals of equal width. Each subinterval has a width of Δx = (x - 0)/n. We evaluate the function at the left endpoint of each subinterval and calculate the corresponding rectangle's area by multiplying the function value by the width Δx. The sum of these areas gives an approximation of the total area.

To approximate the area using right endpoints, we follow the same process but evaluate the function at the right endpoint of each subinterval. Again, we calculate the areas of the rectangles formed and sum them up to obtain an approximation of the total area.

By increasing the number of subintervals (n) and taking the limit as n approaches infinity, we can improve the accuracy of the approximations and approach the actual area of the region between the function and the x-axis over the interval [0, x].

Learn more about corresponding rectangles here:

https://brainly.com/question/28165848

#SPJ11

We are given two points, (1, 1, 0) and (3, -2, 1), on a line in R3 and asked to find:

(a) a vector equation for the line (b) parametric equations for the line

(c) whether the point (-1, 4, -1) is on the line

(d) the distance between the point and the line.

(a) To find a vector equation for the line, we can use the two given points. Let's denote one of the points as P1 and the other as P2. The vector equation for the line L is given by r = P1 + t(P2 - P1), where r is a position vector along the line and t is a parameter. Substituting the given points, we have r = (1, 1, 0) + t[(3, -2, 1) - (1, 1, 0)].

(b) To find parametric equations for the line, we can express each coordinate as a function of the parameter t. For example, the x-coordinate equation is x = 1 + 2t, the y-coordinate equation is y = 1 - 3t, and the z-coordinate equation is z = t.

(c) To determine whether the point (-1, 4, -1) lies on the line L, we can substitute its coordinates into the parametric equations derived in part (b). If the equations are satisfied, then the point lies on the line.

(d) To find the distance between the point (-1, 4, -1) and the line L, we can use the formula for the distance between a point and a line. This involves finding the projection of the vector between the point and a point on the line onto the direction vector of the line. The magnitude of this projection gives us the distance.

By following these steps, we can find a vector equation, parametric equations, determine if the point is on the line, and calculate the distance between the point and the line.

Learn more about parametric equations here:

https://brainly.com/question/29275326?

#SPJ11

The definite integral that represents the arc length of the curve r = 2 over the interval 0 ≤ ø ≤ s is given by ∫(0 to s) √(r^2 + (dr/dø)^2) dø.

To find the arc length of a curve, we can use the formula for arc length in polar coordinates. The formula is given by L = ∫(a to b) √(r^2 + (dr/dø)^2) dø, where r is the equation of the curve and (dr/dø) is the derivative of r with respect to ø.

In this case, the equation of the curve is r = 2. The derivative of r with respect to ø is 0, since r is a constant. Plugging these values into the formula, we have L = ∫(0 to s) √(2^2 + 0^2) dø. Simplifying further, we get L = ∫(0 to s) √(4) dø.

The square root of 4 is 2, so we can simplify the integral to L = ∫(0 to s) 2 dø. Integrating 2 with respect to ø gives us L = 2ø evaluated from 0 to s. Evaluating at the limits, we have L = 2s - 2(0) = 2s.

Therefore, the length of the curve over the interval 0 ≤ ø ≤ s is given by L = 2s.

Learn more about arc here:

https://brainly.com/question/31612770

#SPJ11

The domain of f(g(x)) given f(x) and g(x) = Vx+3 is x ≥ -3.

Given that f(x) and g(x) = √(x+3)Thus, f(g(x)) = f(√(x+3)) The domain of the function f(g(x)) is the set of values of x for which the function f(g(x)) is defined.

To find the domain of f(g(x)), we first need to determine the domain of the function g(x) and then determine the values of x for which f(g(x)) is defined.

Domain of g(x) : Since g(x) is a square root function, the radicand must be non-negative.x+3 ≥ 0⇒ x ≥ -3Thus, the domain of g(x) is x ≥ -3.

Now, we need to determine the values of x for which f(g(x)) is defined. Since f(x) is not given, we cannot determine the exact domain of f(g(x)).

However, we do know that for f(g(x)) to be defined, the argument of f(x) must be in the domain of f(x).

Therefore, the domain of f(g(x)) is the set of values of x for which g(x) is in the domain of f(x).

Therefore, the domain of f(g(x)) is x ≥ -3.

To know more about domain, visit:

https://brainly.com/question/32537121#

#SPJ11

a)Equating demand and supply, we get:

D(x) = S(x)23 - 2x = 8 + ( - x2 ) / 8,0000.02x2 - 2x + 15 = 0

Solving this quadratic equation, we get:

x = 21.21 or 353.54

Since x represents the quantity demanded and supplied, the value of x can't be negative.Therefore, the equilibrium quantity is 21.21.

The equilibrium price can be obtained by substituting the value of x = 21.21 in either demand or supply equation.

p = D(x) = 23 - 2x = 23 - 2(21.21) = $0.58 (rounded to two decimal places)

Therefore, the equilibrium price is $0.58 and the equilibrium quantity is 21.21.

b) Consumer's surplus (CS) can be calculated using the following formula:

CS = ∫0xd[p(x) - S(x)]dx

where, d is the equilibrium quantity, and p(x) and S(x) are demand and supply functions, respectively.

We already know the demand and supply functions and the value of equilibrium quantity is 21.21.

The consumer's surplus is:

CS = ∫0^21.21[p(x) - S(x)]dx

= ∫0^21.21[23 - 2x - (8 + ( - x2 ) / 8,000)]dx

= ∫0^21.21[15 - 2x + x2 / 8,000]dx

= (15x - x2 / 1000 + (x3 / 24,000))0 to 21.21

= (15*21.21 - (21.21)2 / 1000 + ((21.21)3 / 24,000)) - (0)

≈ $15.12 (rounded to two decimal places)

Therefore, the consumer's surplus is $15.12.

c)Producer's surplus (PS) can be calculated using the following formula:

PS = ∫0xd[S(x) - p(x)]dx

where, d is the equilibrium quantity, and p(x) and S(x) are demand and supply functions, respectively.We already know the demand and supply functions and the value of equilibrium quantity is 21.21.

The producer's surplus is:

PS = ∫0^21.21[S(x) - p(x)]dx= ∫0^21.21[8 + ( - x2 ) / 8,000 - (23 - 2x)]dx

= ∫0^21.21[- 15 + 2x + x2 / 8,000]dx

= (- 15x + x2 / 1000 + (x3 / 24,000))0 to 21.21

= (- 15*21.21 + (21.21)2 / 1000 + ((21.21)3 / 24,000)) - (0)

≈ $6.89 (rounded to two decimal places)

Therefore, the producer's surplus is $6.89.

Learn more about quadratic equation :

https://brainly.com/question/30098550

#SPJ11

To apply the Least Unit Cost method and Part Period Balancing method, we need to calculate the Economic Order Quantity (EOQ) for each period.

a) Least Unit Cost Method:To determine the order quantity using the Least Unit Cost method, we need to calculate the EOQ for each period.

EOQ formula is given by:

EOQ = √(2DS/H)Where:

D = Demand for the periodS = Cost of placing an order

H = Holding cost per unit per period

Using the given values:D1 = 100, S = $50, H = $0.50

D2 = 100, S = $50, H = $0.50D3 = 50, S = $50, H = $0.50

D4 = 50, S = $50, H = $0.50D5 = 210, S = $50, H = $0.50

Calculate EOQ for each period:

EOQ1 = √(2 * 100 * $50 / $0.50) = √(10000) = 100EOQ2 = √(2 * 100 * $50 / $0.50) = √(10000) = 100

EOQ3 = √(2 * 50 * $50 / $0.50) = √(5000) ≈ 70.71EOQ4 = √(2 * 50 * $50 / $0.50) = √(5000) ≈ 70.71

EOQ5 = √(2 * 210 * $50 / $0.50) = √(42000) ≈ 204.12

Order quantity for each period:Period 1: Order 100 hard drives

Period 2: Order 100 hard drivesPeriod 3: Order 71 hard drives

Period 4: Order 71 hard drivesPeriod 5: Order 204 hard drives

Total cost of holding and ordering:

Total cost = (D * S) + (H * Q/2)Total cost = (100 * $50) + ($0.50 * 100/2) + (100 * $50) + ($0.50 * 100/2) + (50 * $50) + ($0.50 * 71/2) + (50 * $50) + ($0.50 * 71/2) + (210 * $50) + ($0.50 * 204/2)

Total cost ≈ $10,900

b) Part Period Balancing Method:To determine the order quantity using the Part Period Balancing method, we need to calculate the EOQ for the total demand over all periods.

Total Demand = D1 + D2 + D3 + D4 + D5 = 100 + 100 + 50 + 50 + 210 = 510

EOQ = √(2 * Total Demand * S / H) = √(2 * 510 * $50 / $0.50) = √(102000) ≈ 319.15

Order quantity for each period:Period 1: Order 64 hard drives (510 / 8)

Period 2: Order 64 hard drives (510 / 8)Period 3: Order 64 hard drives (510 / 8)

Period 4: Order 64 hard drives (510 / 8)Period 5: Order 128 hard drives (510 / 4)

Learn more about Period here:

 https://brainly.com/question/11131191

#SPJ11

The slope of the boundary line is 2/3 the y-intercept of the boundary line is -2 the line will be a dashed line and the shading will be below the line.

From the question, we have the following parameters that can be used in our computation:

2x - 3y > 6

Divide through the inequality by 3

So, we have

2/3x - y > 2

This gives

-y > -2/3x + 2

Divide through by -1

y < 2/3x - 2

From the above, we have

slope = 2/3

y-intercept = -2

boundary line = dashed

region = below

Read more about inequality at

https://brainly.com/question/32124899

#SPJ1

We first factor the denominator to determine the partial fraction decomposition of the function (1 + x)/(x2 + x - 30):

The partial fraction decomposition takes the following form thanks to the denominator's factors:Here, we need to figure out the constants A and B. By multiplying both sides of the We first factor the denominator to determine the partial fraction decomposition of the function (1 + x)/(x2 + x - 30The partial fraction decomposition takes the following form thanks to the denominator's factors:

learn more about denominator here:

https://brainly.com/question/8962904

#SPJ11

(a) the expected value of the amount you win 2/9 , (b) the variance of the amount you win 5/18 , c) The expected value of the amount you win is -$0.0667 and d)The variance of the amount you win is 1.2898.

Let's calculate the expected value and variance of the amount you win step by step:

a) Calculate the probability of drawing two marbles of the same color.

First, calculate the probability of drawing two red marbles:

P(RR) = (5/10) * (4/9) = 20/90 = 2/9

Similarly, calculate the probability of drawing two blue marbles:

P(BB) = (5/10) * (4/9) = 20/90 = 2/9

b) Calculate the probability of drawing two marbles of different colors.

P(RB) = (5/10) * (5/9) = 25/90 = 5/18

P(BR) = (5/10) * (5/9) = 25/90 = 5/18

c) Calculate the expected value.

The expected value (EV) is calculated by multiplying each outcome by its probability and summing them up.

EV = (P(RR) * $1.10) + (P(RB) * -$1.00) + (P(BR) * -$1.00) + (P(BB) * $1.10)

= (2/9 * $1.10) + (5/18 * -$1.00) + (5/18 * -$1.00) + (2/9 * $1.10)

= $0.2444 - $0.2778 - $0.2778 + $0.2444

= -$0.0667

Therefore, the expected value of the amount you win is -$0.0667.

d) Calculate the variance.

The variance is a measure of the dispersion of the outcomes around the expected value. It is calculated as the sum of the squared differences between each outcome and the expected value, weighted by their probabilities.

Variance = (P(RR) * ($1.10 - EV)²) + (P(RB) * (-$1.00 - EV)²) + (P(BR) * (-$1.00 - EV)²) + (P(BB) * ($1.10 - EV)²)

Variance = (2/9 * ($1.10 - (-$0.0667))²) + (5/18 * (-$1.00 - (-$0.0667))²) + (5/18 * (-$1.00 - (-$0.0667))²) + (2/9 * ($1.10 - (-$0.0667))²)

= (2/9 * $1.1667²) + (5/18 * -$0.9333²) + (5/18 * -$0.9333²) + (2/9 * $1.1667²)

= 1.2898

Therefore, the variance of the amount you win is 1.2898.

To know more about expected value check the below link:

https://brainly.com/question/30398129

#SPJ4

Given sec(θ) = -1 and θ terminates in QIII, the graph of θ will have a reference angle of π/4 and will be located in QIII. The exact values of sine and cotangent can be determined using the information.

Since sec(θ) = -1, we know that the reciprocal of cosine, which is secant, is equal to -1. In the coordinate system, secant is negative in QII and QIII. Since θ terminates in QIII, we can conclude that θ has a reference angle of π/4 (45 degrees). To sketch the graph of θ, we can start from the positive x-axis and rotate clockwise by π/4 to reach QIII. This indicates that θ lies between π and 3π/2 on the unit circle.

To find the exact values of sine and cotangent, we can use the information from the reference angle. The reference angle of π/4 has a sine value of 1/√2 and a cotangent value of 1. However, since θ is in QIII, both sine and cotangent will have negative values. Therefore, the exact values of sine and cotangent for θ are -1/√2 and -1, respectively.

Learn more about cotangent here:

https://brainly.com/question/30495408

#SPJ11

The total height of the truck is 3.63 meters.

To determine whether the truck will fit under the bridge, we need to consider the total height of the truck and compare it to the height of the bridge.

The height of the tank, including the trailer, can be calculated as follows:

Height of tank = height of trailer + height of tank itself

= 2.5 meters + 1.13 meters (radius of tank)

= 3.63 meters

Therefore, the total height of the truck is 3.63 meters.

The height of the overpass bridge is given as 5 meters.

To determine if the truck can fit under the bridge, we need to compare the height of the truck to the height of the bridge:

Height of truck (3.63 meters) < Height of bridge (5 meters)

Since the height of the truck is less than the height of the bridge, the truck will be able to fit underneath the bridge without any issues.

It's important to note that this analysis assumes the truck is level and there are no additional obstructions on the road. The measurements provided are based on the given information, but it's always a good idea to ensure sufficient clearance by considering factors like road conditions, potential inclines, and any signs or warnings posted for the bridge.

For more such questions on height , Visit:

https://brainly.com/question/28122539

#SPJ11

The region D is bounded by the surface z = x^2 + y^2 and the plane z = 4. We are asked to find two triple integrals: ∭x dV and ∭y dV over region D.

a) To evaluate the triple integral ∭x dV over region D, we need to determine the limits of integration. The region D is bounded by the surface z = x^2 + y^2 and the plane z = 4. Thus, the limits for x are determined by the intersection of these two surfaces, which occurs when x^2 + y^2 = 4. This represents a circle in the xy-plane with a radius of 2. The limits for y are determined by the equation of the circle. For z, the limits are from the lower surface z = x^2 + y^2 to the upper surface z = 4. Substituting the limits, the triple integral becomes ∫∫∫x dz dy dx over the given limits of integration.

b) Similarly, to evaluate the triple integral ∭y dV over region D, we need to determine the limits of integration. The limits for y are determined by the intersection of the surfaces z = x^2 + y^2 and z = 4. Again, using the equation of the circle x^2 + y^2 = 4, the limits for y are determined by this circle. The limits for x and z remain the same as in part a). Thus, the triple integral becomes ∫∫∫y dz dy dx over the given limits of integration.

To learn more about intersections click here :

brainly.com/question/12089275

#SPJ11

The graph of the function f(t) = 5t(h(t-1) - h(t – 7)) for 0 < t < 10. Since the slope of the line for 1 ≤ t < 7 is 0.

The function f(t) = 5t(h(t-1) - h(t – 7)) for 0

Graph of the function f(t) = 5t(h(t-1) - h(t – 7)) for 0 < t < 10:

The graph of the function f(t) = 5t(h(t-1) - h(t – 7)) for 0 < t < 10 is given as follows:

First, let us determine the y-intercept of the function f(t).

Since t > 0, we have:h(t - 1) = 1, if t ≥ 1, and h(t - 7) = 0, if t ≥ 7.

This implies:f(t) = 5t (h(t - 1) - h(t - 7)) = 5t [1 - 0] = 5t for t ≥ 1.

This means the graph of f(t) is a straight line that passes through (1, 5).

Now, let us determine the point at which the graph of f(t) changes slope.

Since h(t - 1) changes from 1 to 0 when t = 7, and h(t - 7) changes from 0 to 1 when t = 7, we can split the function into two parts, as follows:

For 0 < t < 1:f(t) = 5t(1 - 0) = 5t.

For 1 ≤ t < 7:

f(t) = 5t(1 - 1) = 0.

For 7 ≤ t < 10:f

(t) = 5t(0 - 1) = -5t + 50.

Since the slope of the line for 1 ≤ t < 7 is 0, the graph of the function changes slope at t = 1 and t = 7.The final graph is shown below:Therefore, this is the graph of the function f(t) = 5t(h(t-1) - h(t – 7)) for 0 < t < 10.

Learn more about function :

https://brainly.com/question/30721594

#SPJ11

The flux of the vector field F across the cylinder y = 5x is 0. This means that the net flow of the vector field through the surface of the cylinder is zero.

To find the flux of the vector field F across the given cylinder, we need to calculate the surface integral of F over the surface of the cylinder. The surface of the cylinder can be parametrized using u = x and v = y. The normal vector to the surface of the cylinder points in the general direction of the positive y-axis.

Since the vector field F = (-yx, 1, 0), we can compute the dot product of F with the unit normal vector to the surface of the cylinder. The dot product represents the component of the vector field that is normal to the surface. However, since the normal vector and the vector field are perpendicular to each other, the dot product evaluates to zero. This implies that there is no net flow of the vector field through the surface of the cylinder.

In conclusion, the flux of the vector field F across the cylinder y = 5x is zero, indicating that there is no net flow of the vector field through the surface of the cylinder.

To learn more about flux click here: brainly.com/question/15655691

#SPJ11