During lab, you evaluated the bond order and bond length of a series of carbon-carbon bonds. Use the same concepts to predict the bond order and bond length of a series of nitrogen-nitrogen bonds.(a) Which of the structures below have a nitrogen-nitrogen bond order of 3?(b) Which of the structures below have the shortest nitrogen-nitrogen bond?
Answers
Answer:
N≡N
Explanation:
The image attached shows the nitrogen compounds that are being referred to in the question.
There are certain things we ought to know in order to answer the question accurately.
The bond order of a compound is equal to the number of bonds between two atoms. The greater the bond order, the shorter the bond length between the two atoms.
N≡N has a bond order of three, this is the highest bond order among all the species listed in the question. Hence it has the shortest bond length among the trio. Hence the answer.
Related Questions
A sample of 6.022 x 1023 particles of gas has a volume of 22.4 L at 0°C and a pressure of 1.000 atm. Although it may seem silly to contemplate, what volume would 1 particle of gas occupy?
pv=nRT
Answers
Answer:
1 particle of the gas would occupy a volume of 3.718*10⁻²³L
Explanation:
Hello,
1. The sample has a particle of 6.022×10²²particles
2. Volume of the sample = 22.4L
3. Temperature of the sample = 0°C = (0 +273.15)K = 273.15K
4. Pressure of the sample = 1.0atm
What volume would 1 particle of the gas occupy?
But we remember that 1 mole of any substance = 6.022×10²² molecules or particles or atoms
What would be the number of moles for 1 particule?
1 mole = 6.022×10²² particles
X moles = 1 particle
X = (1 × 1) / 6.022×10²² particles
X = 1.66×10⁻²⁴ moles
Therefore, 1 particle contains 1.66×10⁻²⁴ moles
Since we know our number of moles, we can proceed to use ideal gas equation,
Ideal gas equation holds for all ideal gas and is defined as
PV = nRT
P = pressure of the ideal gas
V = volume the gas occupies
n = number of moles of the gas
R = ideal gas constant = 0.082 L.atm / mol.K
T = temperature of the gas
PV = nRT
Solving for V,
V = nRT/ P
We can now plug in our values into the above
equation.
V = (1.66*10⁻²⁴ × 0.082 × 273.15) / 1
V = 3.718*10⁻²³L
Therefore, 1 particule of the gas would occupy a volume of 3.718*10⁻²³L.
What is the molar mass of P2O5?
Answers
Answer:
142 grams
Explanation:
To find the molar mass of a molecule or compound, you simply need to add together the molar masses of all of the atoms that comprise it. Phosphorus has a molar mass of about 31, while oxygen has one of about 16, meaning that the molar mass of this molecule is:
2(31)+5(16)=62+80=142
Hope this helps!
Suppose a reaction mixture, when diluted with water, afforded 300 mL of an aqueous solution of 30 g of the reaction product malononitrile [CH2(CN)2], which is to be isolated by extraction with ether. The solubility of malononitrile in ether at room temperature is 20.0 g/100 mL, and in water is 13.3 g/100 mL. What weight of malononitrile would be recovered by extraction with (a) three 100-mL portions of ether and (b) one 300-mL portion of ether
Answers
The given question is not complete, the complete question is:
Suppose a reaction mixture, when diluted with water, afforded 300 mL of an aqueous solution of 30 g of the reaction product malononitrile [CH2(CN)2], which is to be isolated by extraction with ether. The solubility of malononitrile in ether at room temperature is 20.0 g/100 mL, and in water is 13.3 g/100mL. The ratio of these quantities is equal to the partition coefficient, k, which equals What weight of malononitrile would be recovered by extraction of (a) three 100-mL portions of ether and (b) one 300-mL portion of ether? SHOW WORK (Can be written in pen and attached to report). Suggestion: For each extraction, let x equal the weight extracted into the ether layer. In part (a), for the first of the three extractions, the concentration of malononitrile in the ether layer is x/100 and in the water layer is (30-x)/100.
Answer:
The correct answer is 10 grams and 18 grams.
Explanation:
Based on the given question, 20 gram per 100 ml is the solubility of malononitrile in ether, and 13.3 gram per 100 ml is the solubility of malononitrile in water.
Thus, the ration of the solubility is,
Solubility in water/solubility in ether = 20/13.3 = 1.50
a) Let w be the weight of malononitrile extracted into water in every extraction. Then the concentration of the ether layer will be w/100. The concentration in the water layer will be 30-w/300. Now the ratio will be,
Ratio = w/100 / (30-w)/300
1.50 = w/100 * 300 (30-w)
w = 10
Hence, the weight of malononitrile recovered by extraction is 10 grams.
b) The concentration in the ether layer will be w/300. The concentration in the water layer will be (30-w) / 300. Now the ratio will be,
Ratio = w/300 / (30-w) / 300
1.50 = w/300 * 300 (30-w)
w = 18
Hence, 18 grams is the weight of malononitrile recovered by extraction.
Choose the INCORRECT statement. A. Temperatures of two bodies are equal when the average kinetic energies of the two bodies become the same. B. The heat capacity is the quantity of heat required to change the temperature of the system by one degree. C. The specific heat is the heat capacity for one mole of substance. D. Most metals have low specific heats, as metals can be heated quickly. E. The law of conservation of energy can be written: qsystem qsurroundings
Answers
Answer:
Option C
The specific heat is the heat capacity for one mole of a substance.
Explanation:
The incorrect statement is The specific heat is the heat capacity for one mole of a substance.
This is because the specific heat capacity is the amount of heat required to raise the temperature of 1 gramme of a substance by 1 degree Celcius.
Note that the unit in question here for the specific heat capacity of the substance is in grammes.
The definition given in the options is actually for the molar heat capacity of the substance, not the specific heat capacity.
when a car drives down a street, what evergy conversions are happening?
Answers
Consider the following specific heats of metals. Metal Specific Heat Aluminum 0.897 J/(g°C) Magnesium 1.02 J/(g°C) Lithium 3.58 J/(g°C) Silver 0.237 J/(g°C) Gold 0.129 J/(g°C) If the same amount of heat is added to 25.0 g of each of the metals, which are all at the same initial temperature, which metal will have the lowest temperature?
Answers
Answer:
Lithium
Explanation:
The specific geat capacity of a substance is the energy required to raise 1 unit of that substance by one degree.
Heat energy (Q) = mc∇t
Q = heat energy
M = mass of the substance
c = specific heat capacity
∇t = change in temperature of the substance
Generally, increase in the specific heat capacity will lead to a lower final temperature likewise decrease in the specific heat capacity will lead to increase the final temperature of the substance.
From the data above, we can take just two specific heat capacity and test this theory.
Assuming we have a
Mass = 25g
Heat energy applied (Q) = 1 J
Initial temperature (T1) = 10°C
Final temperature (T2) = ?
Q = mc∇t
Q = mc (T2 - T1)
For Lithium, specific heat capacity = 3.58J/g°C
1 = 25 × 3.58 (T2 - 10)
Solve for T2
1 = 89.5 (T2 - 10)
1 = 89.5T2 - 895
89.5T2 = 896
T2 = 896 / 89.5
T2 = 10.011°C
For Magnesium (Mg) specific heat capacity = 1.02J/g°C
Q = mc∇t
1 = 25 × 1.02 × (T2 - 10)
1 = 25.5 (T2 - 10)
1 = 25.5T2 - 255
Solve for T2
25.5T2 = 256
T2 = 10.039°C
Notice the trend that decrease in the specific heat capacity leads to increase in the final temperature.
Try and continue for the elements and see how it works.
what happens when you combine Mg2 and NO3
Answers
Answer: they blow up
Explanation: add them together and they will blow up
Answer:
Magnesium nitrate Reactions
Magnesium nitrate has a high affinity towards water. Therefore, heating it results to decompose into magnesium oxide, nitrogen oxides, and oxygen. 2 Mg(NO3)2 → 2 MgO + 4 NO2 + O2.
A red blood cell is placed into each of the following solutions. Indicate whether crenation, hemolysis, or neither will occur. Solution A: 3.75 % (m/v) NaCl Solution B: 1.92 % (m/v) glucose Solution C: distilled H2O Solution D: 9.03 % (m/v) glucose Solution E: 5.0% (m/v) glucose and 0.9% (m/v) NaCl
Answers
Answer:
A. The cell will undergo crenation
B. The cell will undergo hemolysis
C. The cell will undergo hemolysis
D. The cell will undergo crenation.
E. The cell will undergo neither crenation nor hemolysis
Explanation:
A hypotonic solution is a solution in which the concentration of solutes is greater inside the cell than outside the cell.
A hypertonic solution is a solution in which the concentration of solutes is greater outside the cell than inside the cell.
An isotonic solution is a solution in which the concentration of solution is the same outside and inside of the cell. A solution with 5% (m/v) glucose and 0.9% (m/v) NaCl is an isotonic solution.
When a red blood cell is placed in a hypotonic solution, it will swell and burst. This is known as hemolysis.
When placed in a hypertonic solution, a red blood cell will lose water and shrivel. This is is known as cremation.
When a red blood cell is placed in an isotonic solution, neither hemolysis or crenation occurs as there is no net movement of water across the cell's membrane.
A: 3.75 % (m/v) NaCl Solution is a hypertonic solution. The cell will undergo crenation
B: 1.92 % (m/v) glucose Solution is hypotonic. The cell will undergo hemolysis
C: Distilled H2O Solution is a hypotonic solution. The cell will undergo hemolysis
D: 9.03 % (m/v) glucose Solution is a hypertonic solution. The cell will undergo crenation
E: 5.0% (m/v) glucose and 0.9% (m/v) NaCl are both isotonic solutions. The cell will undergo neither hemolysis not crenation.
Solution A (3.75% NaCl): Crenation
Solution B (1.92% glucose): HemolysisSolution C (Distilled H2O): HemolysisSolution D (9.03% glucose): CrenationSolution E (5.0% glucose and 0.9% NaCl): CrenationWhat is the SolutionTo find out if a red blood cell will shrink, burst, or stay the same when placed in a solution, we have to think about how concentrated the solution is compared to the red blood cell.
A red blood cell has a normal concentration of about 0. 9% salt or 0. 3% sugar Solutions that have more concentrated substances are called hypertonic, while solutions that have less concentrated substances are called hypotonic.
Read more about Solution here:
https://brainly.com/question/25326161
#SPJ6
Describe, in detail, to a freshman undergraduate how to make 1 liter of LB + Kan (100 μg/ml final concentration) + Amp (50 μg /ml final concentration) liquid media. [Include things like how many grams of each component that you use, how much antibiotic (in ml) to add (stock solutions – 100 mg/ml ampicillin, 25 mg/ml kanamycin), and in what type of container you perform the sterilization step.] Show your calculations.
Answers
Answer:
Explanation:
The objective here is to prepare 1 liter of LB + Kan (100 μg/ml final concentration) + Amp (50 μg /ml final concentration) liquid media.
Given that :
the Stock concentration of Amp: 100 mg/ml (since 1 mg/ml = 1000 μg/ml)
it is required that we convert stock concentration in μg/ml since 100 mg/ml = 100000 μg/ml
However, using formula C₁V₁=C₂V₂ (Ampicilin),
where:
C₁ = 100000 μg/ml,
V₁=?,
C₂= 50 μg/ml,
V₂=1000 ml
100000 μg/ml × V₁ = 50 μg/ml × 1000 ml
V₁ = 50 μg/ml × 1000 ml/100000 μg/ml
V₁ = 0.5 ml
Given that:
the Stock concentration of Kan: 25 mg/ml (since 1 mg/ml = 1000 μg/ml)
it is required that we convert stock concentration in μg/ml , 25 mg/ml = 25000 μg/ml
Now by using formula C₁V₁=C₂V₂ (Kanamycin),
C₁ = 25000 μg/ml,
V₁=?,
C₂= 100 μg/ml,
V₂=1000 ml
25000 μg/ml × V₁ = 100 μg/ml × 1000 ml
V₁ = 100 μg/ml × 1000 ml/25000 μg/ml
V₁ = 4 ml
Thus; in 1 lite of Lb+ Kan+Amp preparation;
0.5 ml of Amp & 4 ml of kanamycin is used for their stock preparation.
Finally;
Sterilization step should be carried out in flask (Clean dry glass wares) for media in an autoclave, the container size should be twice the volume of media which is prepared.
Which best explains how heat plays a role in the movement of materials within Earth's interior?
Answers
Answer:
Hot material near the core is less dense and rises, when it cools, it becomes more dense and sinks.
Explanation:
This best explains how heat plays a role in the movement of materials within Earth's interior because it's how convection works. Convection is the circular motion that happens when warmer air or liquid which has faster moving molecules, making it less dense rises, while the cooler air or liquid drops down. Convection currents within the earth move layers of magma, and convection in the ocean creates currents.
Earth’s interior is like a closed chamber, hot material near Earth's surface is more denser and sinks, and when it cools, it becomes less dense and Rises.
What is Convection?Convection is the process of heat transfer by the bulk movement of molecules within fluids such as gases and liquids. The heat transfer take place from solid to no solid material. like air and water.
As we take example of home. In home heat take nearer the roof and cold air will be nearer to the flour. It is because of hot is less denser then the cold air. Hot air will become less denser and move towords upside. Cold air become denser move towards down.
Similarly, on earth. Nearer to earth hot materials are more dense and sinks. When it cools, it become less dense and rises.
To find more about Heat flow, refer the link below:
brainly.com/question/15394654
#SPJ2
A salt solution was found to contain 1.50 g of salt dissolved in 50 mL of water. On evaporation, the recovered salt weighed 1.47 g. What percent of salt was recovered?
A) 20.4%
B) 107%
C) 98%
D) 20.0%
Answers
Answer:
C = 98%
Explanation:
Hello,
To determine the percentage of salt recovered, we'll divide the mass of the salt recovered over by the original mass of the salt.
Mass of salt recovered = 1.47g
Initial mass of salt = 1.50g
Percentage of salt recovered = (mass recovered/ initial mass of salt) × 100
Percentage of salt recovered = (1.47 / 1.50) × 100
Percentage of salt recovered = 0.98 × 100
Percentage of salt recovered = 98%
The percentage of salt recovered is equal to 98%
The functional groups in an organic compound can frequently be deduced from its infrared absorption spectrum. A compound containing C, H, and O exhibits intense absorption at 1720 cm-1. No additional information is available. List possible classes for which there is positive evidence.
Relative absorption intensity: (s)=strong, (m)=medium, (w)=weak.
What functional class(es) does the compound belong to?
List only classes for which evidence is given here. Attach no significance to evidence not cited explicitly.
Do not over-interpret exact absorption band positions. None of your inferences should depend on small differences like 10 to 20 cm-1.
a. alkane (List only if no other functional class applies.)
b. alkene h. amine
c. terminal alkyne i. aldehyde or ketone
d. internal alkyne j. carboxylic acid
e. arene k. ester
f. alcohol l. nitrile
g. ether
Answers
Answer:
The class of this compound is aldehyde or ketone (i).
Explanation:
Absorption peak at 1720 cm-1 shows the presence of a carbonyl group, possibly an aldehyde or ketone with C=O bond.
Further information on molecular formula would be required for structural elucidation.
Each of the insoluble salts below are put into 0.10 M hydrobromic acid solution. Do you expect their solubility to be more, less, or about the same as in a pure water solution ?
a. Calcium sulfite
b. Calcium fluoride
c. Silver bromide
Answers
Answer:
A. Solubility of calcium sulfite increases
B. Solubility of calcium fluoride increases
C. Solubility of Silver bromide decreases
Explanation:
The solubility factor is proportional to ions' concentration. The solubility of a solution can be predicted from Le Chatelier's principle which states that if an external constraint is imposed on a system in equilibrium, the equilibrium position will shift in order to annul the effect of the external constraint. So, If the reactant's concentration increases, the equilibrium shifts to the right indicating a higher solubility of the solution and if the product's concentration increases, the equilibrium shifts to the left indicating a lesser solubility of the solution.
Case 1. Calcium sulfite
The dissociation reaction of CaSO3 is given below:
CaSO3 ----> Ca²+ + SO3²-
SO3²- is the conjugate base of the weak acid, H2SO3. Therefore, on the addition of hydrobromic acid, some of the sulfite ion is removed from the solution by the following reaction;
H+ + SO3²- ---> HSO3-
This shifts the equilibrium to the right, more dissociation, thereby resulting in more solubility of the solute.
Case 2. Calcium fluoride
The dissociation reaction of calcium fluoride (CaF2) is shown below.
CaF2 ----> Ca²+ + 2F-
Fluoride ion (F-) is a strong conjugate base of the weak acid. Therefore, some of fluoride ions is removed by the addition of hydrobromic acid as shown below:
H+ + F- ---->. HF
Hence, the concentration of fluoride ions reduces, shifting equilibrium in the forward direction. Therefore, the solubility will be more than in pure water solution.
Case 3: Silver bromide
The dissociation reaction of AgBr is as follows:
AgBr ----> Ag+ + Br-
The addition of HBr will increase the concentration of bromide ions. Hence, equilibrium will shift in backward direction resulting in a lesser solubility than in water.
The solubility of calcium sulfite and calcium fluoride is greater in 0.10 M hydrobromic acid solution than in pure water while the solubility of silver bromide is lesser in 0.10 M hydrobromic acid solution than in pure water.
Common ion effect refers to the decrease in solubility of a substance in a solution that contains another solute with which it has a common ion. If a substance is dissolved in a solution that contains a solute with which it has a common ion, the solubility of the substance in that solution is less than its solubility in pure water.
Considering the substances given, the solubility of calcium sulfite and calcium fluoride in 0.10 M hydrobromic acid solution is more than their solubility in pure water the equilibrium position is shifted in the forward direction.
However, solubility of silver bromide in 0.10 M hydrobromic acid solution is less than its solubility in pure water due to common ion effect.
Learn more: https://brainly.com/question/6505878
In which of these statements are protons, electrons, and neutrons correctly compared?
Quarks are present in protons and neutrons but not in electrons.
Quarks are present in protons, neutrons, and electrons.
Quarks are present in neutrons and electrons but not in protons.
Quarks are present in protons and electrons but not in neutrons
Answers
the second statement is the correct one quarks are needed to balance charges in all subatomic particles such as neutrons, protons and electrons
how many molecules (not moles) of NH3 are produced from 5.25x10^-4 g of H2?
due in a few, please help. will mark as brainliest
Answers
Answer:
not 100% but i think its 1.57x10^20
Explanation:
5.25x10^-4g / 2.016g
2.60x10^-4 x 6.022x10^23= 1.56x10^20 molecules
How many molecules of water are in 5 moles
Answers
Answer:
3.011x10^24 molecules
Explanation:
1 mole=6.022x10^23 molecules
5 moles*6.022x10^23 molecules/mole=3.011x10^24 molecules
Consider the following reaction:
2NO(g)+O2(g)→2NO2(g)
Estimate ΔG∘ for this reaction at each of the following temperatures and predict whether or not the reaction will be spontaneous. (Assume that ΔH∘ and ΔS∘ do not change too much within the give temperature range.) I need to find the temperature are 298K and 702K. For 298K It is simple because at standard temperature
ΔG∘ = DG(products)- DG(reactants).
Answers
Answer:
A. [tex]\mathbf{\Delta G^0 = -72.6 \ kJ/mol}[/tex] ; as such the reaction is said to be spontaneous since the value of [tex]\mathbf{\Delta G^0 }[/tex] is negative.
B. [tex]\mathbf{\Delta G^0_{702 \ K} = -13.29 \ kJ/mol.K}}[/tex] and the reaction is spontaneous
Explanation:
The equation for this chemical reaction is :
[tex]2NO_{(g)} +O_{2(g)} \to 2NO_{2(g)}[/tex]
Using the following relation to calculate [tex]\Delta G^0[/tex];
[tex]\Delta G^0 = [2(\Delta G^0_{NO_{2(g)}}] - [1(\Delta G^0_{O_{2(g)}})+ 2(\Delta G^0_{NO_{g}})][/tex]
At 298 K; the standard Gibbs Free Energy for the formation are as follows:
[tex]\Delta G^0_{NO_{2(g)}} = 51.2 \ kJ/mol[/tex]
[tex]\Delta G^0_{O_{2(g)}} = 0[/tex]
[tex]\Delta G^0_{NO_{g}}= 87.6 \ kJ/mol[/tex]
Replacing them into the above equation;
[tex]\Delta G^0 = [2(51.2 \ kJ/mol}] - [1(0)+ 2(87.6 \ kJ/mol})][/tex]
[tex]\Delta G^0 = [102.4 \ kJ/mol}] - [175.2 \ kJ/mol})][/tex]
[tex]\mathbf{\Delta G^0 = -72.6 \ kJ/mol}[/tex]
Thus; [tex]\mathbf{\Delta G^0 = -72.6 \ kJ/mol}[/tex] ; as such the reaction is said to be spontaneous since the value of [tex]\mathbf{\Delta G^0 }[/tex] is negative.
B.
Using the same above chemical equation;
The relation used for calculating [tex]\mathbf{\Delta G^0}[/tex] of the reaction when the temperature is 702 K is:
[tex]\Delta G^0_{702 \ K} = \Delta H^0_{xn} - T \Delta S^0_{rxn}[/tex]
where;
[tex]\Delta G^0_{702 \ K} =[/tex] Gibbs free energy of the reaction at 702 K
[tex]\Delta H^0_{xn}[/tex] = standard enthalpy of the reaction = -116.2 kJ/mol
[tex]\Delta S^0_{rxn}[/tex] = standard entropy of the reaction = -146.6 J/mol/K
Temperature T = 702 K
[tex]\Delta G^0_{702 \ K} = -1162. \ kJ/mol - 702 \ K ( -146.6 \ J/mol. K (\dfrac{1 \ kJ }{1000 \ J})[/tex]
[tex]\Delta G^0_{702 \ K} = -1162. \ kJ/mol - 702 \ K ( 0.1466 \ kJ/mol.K})[/tex]
[tex]\Delta G^0_{702 \ K} = -13.2868 \ kJ/mol.K}[/tex]
[tex]\mathbf{\Delta G^0_{702 \ K} = -13.29 \ kJ/mol.K}}[/tex]
Thus [tex]\mathbf{\Delta G^0_{702 \ K} = -13.29 \ kJ/mol.K}}[/tex] and the reaction is spontaneous
Calculate Keq for these reactions and predict if the equilibrium will lie to the right or to the left as written. (You may enter your answer in scientific notation, e.g. 1.0*10^-9. Enter your answer to two significant figures.) Reaction 1: + + pKa = 9 pKa = 38 Keq = Equilibrium position = _______ Reaction 2: + + pKa = 35 pKa = 25 Keq = Equilibrium position = _______
Answers
Complete Question
The complete question is shown on the first uploaded image
Answer:
For reaction 1
[tex]K_{eq} = 10^{29}[/tex]
The equilibrium position is to the right
For reaction 2
[tex]K_{eq} = 10^{-6.66}[/tex]The equilibrium position is to the left
Explanation:
Generally [tex]pKa[/tex] is mathematically evaluated as
[tex]pKa = pKa _ \ {left }} - pKa _ \ {right }}[/tex]
And equilibrium position [tex]K_a[/tex] is mathematically evaluated as [tex]K_{eq} = 10^\ {-pK_a}[/tex]
From the question we are told that
For reaction 1
[tex]pKa_\ {left}} \ = 9[/tex]
[tex]pKa_\ {right }} \ = 38[/tex]
So
[tex]pKa = 9-38[/tex]
[tex]pKa =-29[/tex]
So [tex]K_{eq} = 10^{-(-29)}[/tex]
[tex]K_a = 10^{29}[/tex]
This implies that the equilibrium position is to the right
For reaction 2
[tex]pKa_\ {left}} \ = 15.9[/tex]
[tex]pKa_\ {right }} \ = 9.24[/tex]
So
[tex]pKa = 15.9-9.24[/tex]
[tex]pKa = 6.66[/tex]
So [tex]K_{eq} = 10^{-(6.66)}[/tex]
[tex]K_{eq} = 10^{-6.66}[/tex]
This implies that the equilibrium position is to the left
One method of experimentally determining whether a species is paramagnetic is to weigh it in an instrument called a magnetic susceptibility balance. This is a balance with a strong electromagnet placed next to the sample holder. If the species is paramagnetic, the mass reading of the balance will increase when the field is switched on.Classify these species as paramagnetic or diamagneticWhich species will have the strongest mass shift on a magnetic susceptibility balance?
Answers
Answer:
Diamagnetic have paired electrons while paramagnetic have at least one unpaired electron.
Explanation:
F2, C2 and N2 are diamagnetic while O2 and B2 are paramagnetic. Diamagnetic are those atoms which have paired electrons while paramagnetic are those atoms which contain at least one unpaired electron so we can say that F2, C2 and N2 have paired electrons while O2 and B2 have unpaired electrons. When diamagnetic materials are allowed to contact with external magnetic field so they will be repelled while paramagnetic materials are attracted by magnetic field due to the presence of unpaired electrons.
Iron oxide (FeO) is the strongest paramagnetic material having the value of 720.
Aqueous sulfuric acid H2SO4 will react with solid sodium hydroxide NaOH to produce aqueous sodium sulfate Na2SO4 and liquid water H2O. Suppose 62. g of sulfuric acid is mixed with 33.8 g of sodium hydroxide. Calculate the minimum mass of sulfuric acid that could be left over by the chemical reaction. Round your answer to 2 significant digits.
Answers
Answer:
Approximately [tex]21\; \rm g[/tex].
Explanation:
[tex]\rm H_2SO_4[/tex] (a diprotic acid) reacts with [tex]\rm NaOH[/tex] (a monoprotic base) at a one-to-two ratio:
[tex]\rm 2\; NaOH\, (s) + H_2SO_4\, (aq) \to Na_2SO_4\; (aq) + 2\; H_2O\, (l)[/tex].
In other words, if [tex]n(\mathrm{NaOH})[/tex] and [tex]n(\mathrm{H_2SO_4})[/tex] represent the number of moles of the two compounds reacted, then:
[tex]\displaystyle \frac{n(\mathrm{H_2SO_4})}{n(\mathrm{NaOH})} = \frac{1}{2}[/tex].
Look up the relative atomic mass data on a modern periodic table:
[tex]\rm H[/tex]: [tex]1.008[/tex].[tex]\rm S[/tex]: [tex]32.06[/tex].[tex]\rm O[/tex]: [tex]15.999[/tex].[tex]\rm Na[/tex]: [tex]22.990[/tex].Calculate the (molar) formula mass of [tex]\rm H_2SO_4[/tex] and [tex]\rm NaOH[/tex]:
[tex]M(\mathrm{H_2SO_4}) = 2 \times 1.008 + 32.06 + 4 \times 15.999 = 98.072\; \rm g \cdot mol^{-1}[/tex].
[tex]M(\mathrm{NaOH}) = 22.990 + 15.999 + 1.008 = 39.997\; \rm g \cdot mol^{-1}[/tex].
Calculate the number of moles of formula units in that [tex]33.8\; \rm g[/tex] of [tex]\rm NaOH[/tex]:
[tex]\begin{aligned}n(\mathrm{NaOH}) &= \frac{m(\mathrm{NaOH})}{M(\mathrm{NaOH})} \\ &= \frac{33.8\; \rm g}{39.997\; \rm g \cdot mol^{-1}} \approx 0.845\; \rm mol\end{aligned}[/tex].
Apply the ratio [tex]\displaystyle \frac{n(\mathrm{H_2SO_4})}{n(\mathrm{NaOH})} = \frac{1}{2}[/tex] to find the (maximum) number of moles of [tex]\rm H_2SO_4[/tex] that would react with the [tex]33.8\; \rm g[/tex] of [tex]\rm NaOH[/tex]:
[tex]\begin{aligned}n(\mathrm{H_2SO_4}) &= \frac{n(\mathrm{H_2SO_4})}{n(\mathrm{NaOH})} \cdot n(\mathrm{NaOH})\\ &= \frac{1}{2} \times 0.845 \approx 0.4225\; \rm mol\end{aligned}[/tex].
Calculate the mass of that [tex]0.4225\; \rm mol[/tex] of [tex]\rm H_2SO_4[/tex]:
[tex]\begin{aligned}m(\mathrm{H_2SO_4}) &= n(\mathrm{H_2SO_4}) \cdot M(\mathrm{H_2SO_4})\\ &= 0.4225 \; \rm mol \times 98.072\; \rm g \cdot mol^{-1} \approx 41.435\; \rm g \end{aligned}[/tex].
When the maximum amount of [tex]\rm H_2SO_4[/tex] is reacted, the minimum would be in excess. Hence, the minimum mass of
[tex]62\; \rm g - 41.435\; \rm g \approx 21\; \rm g[/tex] (rounded to two significant figures.)
To determine the absolute age of rocks and fossils, geologists use _____.
Answers
Answer:
The rates of decay of radioactive elements
Explanation:
The age of a rock in years is called its absolute age. Geologists find absolute ages by measuring the amount of certain radioactive elements in the rock. When rocks are formed, small amounts of radioactive elements usually get included.
A Carbon-10 nucleus has 6 protons and 4 neutrons. Through radioactive beta decay, it turns into a Boron-10 nucleus, with 5 protons and 5 neutrons, plus another particle. What kind of additional particle, if any, is produced during this decay
Answers
Answer:
No additional particle was produced during the decay.
Explanation:
The equation of decay is given as;
¹⁰₆C + ⁰₋₁ e → ¹⁰₅B + x
To identify x, we have to calculate its atomic and mass number.
In the reactants side;
Atomic Number = 6 + (-1) = 5
Mass number = 10 + 0 = 10
In the products side;
Atomic Number = 5 + x
Mass Number = 10 + x
Generally, reactant = product
Atomic Number;
5 = 5 + x
x = 5 - 5 = 0
Mass Number;
10 = 10 + x
x = 10 - 10 = 0
This means no additional particle was produced during the decay.
A temperature of 50°F is equal to °C.
Answers
Answer:
CONVERT IT:
50°F is equal to 10°C
Answer:
10 degrees Celsius
Explanation:
(50°F − 32) × 5/9 = 10°C
What does the atmosphere do for humans?
Answers
Consider the addition of an electron to the following atoms from the third period. Rank the atoms in order from the most negative to the least negative electron affinity values based on their electron configurations.
Atom or ion Electron configuration
Br 1s22s22p63s23p64s23d104p5
Ge 1s22s22p63s23p64s23d104p2
Kr 1s22s22p63s23p64s23d104p6
Answers
Answer:
The ranks is
Ge: 3d10 4s2 4p2 (6 electrons in the outer shell)
Br: 3d10 4s2 4p5 (7 electrons in the outer shell)
Kr: 3d10 4s2 4p6 (8 electrons in the outer shell)
Explanation:
Electronic configuration reffers to the distribution of electrons of an atom or molecule in atomic or molecular orbitals. It gives us the understanding of the shape and energy of its electrons. The electronic configuration explain the The electron affinity or propensity to attract electrons
It Should be noted that the most stable configuration in an electronic configuration is attributed to when the last shell is full, i.e. when the last shell has 8 electrons.
When an atom is closer to reach the 8 electrons in the outer shell, then it's electron affinity big.
Considering the given three configuration of the elements above, we can see that "Br"needs requires only 1 electron to have 8 electrons in the outer shell, therefore, it is considered to have the biggest electron affinity among them which is reffers to as the LEAST NEGATIVE.
Ge: with the electronic configuration 3d10 4s2 4p2 has 6 electrons in the outer shell which means it still requires 2 electrons to complete 8 electrons in its outer shell, so it can be deducted that it posses an atom that is more negative than Br.
Kr: with the electronic configuration 3d10 4s2 4p6 which is a noble gas has 8 electrons in the outer shell cannot add more electrons to its outer shell because the 8 electrons is complete posses the least electron affinity among the three elements and it is the MOST NEGATIVE
What is the predicted order of first ionization energies from highest to lowest for lithium (Li), sodium (Na), potassium (K), and rubidium (Rb)?
Rb > K > Na > Li
K > Rb > Na > Li
Li > Na > K > Rb
Rb > K > Li > Na
Answers
Answer:
Li>Na>K>Rb
Explanation:
Answer:
c. Li > Na > K > Rb
Explanation:
edge 2021
(:
Explain, in terms of charge distribution, why a molecule of carbon tetrachloride is a nonpolar molecule.
Answers
Answer:
Explanation:
The covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule. Covalent bonds are established between non-metallic elements, such as hydrogen H, oxygen O and chlorine Cl. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas.
The covalent bond between two atoms can be polar or nonpolar. If the atoms are equal, the bond will be nonpolar (since no atom attracts electrons more strongly). But, if the atoms are different, the bond will be polarized towards the most electronegative atom, because it will be the atom that attracts the electron pair with more force. Then it will be polar.
It can occur in a molecule that the bonds are polar and the molecule is nonpolar. This occurs because of the geometry of the molecule, which causes them to cancel the different equal polar bonds of the molecule.
In carbon tetrachloride the bonds are polar, but the tetrahedral geometry of the molecule causes all four dipoles to cancel out and the molecule to be apolar.
The carbon tetrachloride s CCL4 is a carbon molecule and four chloride molecule's. The carbon tetrachloride is a nonpolar, as the dipole movement of the molecules ae evenly spaced around the central carbon atom.
As polarity is a result of the geometric sum of the bond dipoles. The bond has separate charges. It's nonpolar because the charge is symmetrically distributed.Hence the carbon tetrachloride happens to be a nonpolar molecular.
Learn more about the in terms of charge distribution, why a molecule.
brainly.com/question/11858200.
Amylase is the enzyme that controls the breakdown of starch to glucose. Describe how the student could investigate the effect of pH on the breakdown of starch by amylase.
Answers
Answer:
Explanation:
You will investigate the breakdown of starch by amylase at different pHs.
The different pHs under investigation will be produced using buffer solutions. Buffer solutions produce a particular pH, and will maintain it if other substances are added.
The amylase will break down the starch.
A series of test tubes containing a mixture of starch and amylase is set up at different pHs.
A sample is removed from the test tubes every 10 seconds to test for the presence of starch. Iodine solution will turn a blue/black colour when starch is present, so when all the starch is broken down, a blue-black colour is no longer produced. The iodine solution will remain orange-brown.
A control experiment must be set up - without the amylase - to make sure that the starch would not break down anyway, in the absence of an enzyme. The result of the control experiment must be negative - the colour must remain blue-black - for results with the enzyme to be valid.
When the starch solution is added:
Start timing immediately.Remove a sample immediately and test it with iodine solution.Sample the starch-amylase mixture continuously, for example every 10 seconds.For each pH investigated, record the time taken for the disappearance of starch, ie when the iodine solution in the spotting tile remains orange-brown.
The time taken for the disappearance of starch is not the rate of reaction.
It will give us an indication of the rate, but is the inverse of the rate - the shorter the time taken, the greater the rate of the reaction.
We can calculate the rate of the reaction by calculating \frac{1}{t}, obtaining a measure of the rate of reaction by dividing one by the time taken for the reaction to occur.
A similar experiment can be carried out to investigate the effect of temperature on amylase activity.
Set up a series of test tubes in the same way and maintain these at different temperatures using a water bath - either electrical or a heated beaker of water.
Depending on the chemical reaction under investigation, you might monitor the reaction in a different way. If investigating the effect of temperature on the breakdown of lipid by lipase, you could monitor pH change - lipids are broken down into fatty acids and glycerol. As the reaction begins, the release of fatty acids will mean that the pH will decrease.
good luck :)
Volume of water is 35 cm3 and mass of water is 60 gram, what is the density of the water.
Answers
Answer:
p = 1.714 g/cm3
Explanation:
Density Equation
p=mV
Where:
p = density
m = mass = 60g
V = volume = 35cm3
p = 60g x 35cm3
p = 1.714 g/cm3
p=1.714g/cm³
Explanation:
v=35cm³
m=60g
P=mass/volume (density formula)
=60/35
=1.714g/cm³
An unknown compound, B, has the molecular formula C7H12. On catalytic hydrogenation 1 mol of B absorbs 2 mol of hydrogen and yields 2-methylhexane. B has significant IR absorption band at about 3300 and 2200 cm-1. Which compound best represents B?
Answers
Answer:
5-methylhex-1-yne//5-methylhex-2-yne//2-methylhex-3-yne
Explanation:
We have to start with the information on the IR spectrum. The signal at 3300 is due to a C-H bend sp carbon and the signal in 2200 is due to the stretch carbon-carbon. Therefore we will have an alkyne. Now if we have 2-methylhexane as the product of hydrogenation we have several options to put the triple bond. Between carbons 1 and 2 (5-methylhex-1-yne), between carbons 2 and 3 (5-methylhex-2-yne) and between carbons 3 and 4 (2-methylhex-3-yne). On carbon 5 we have a tertiary carbon therefore we dont have any other options.
See figure 1
I hope it helps!