Answer:
4. Making a few tacos and eating them to see how they taste.
Explanation:
The method of engineering design refers to the sequence of procedures that engineers undertake to reach a solution to a concerning problem. Generally, the solution needs to create a machine or a product that fulfills specific requirements or performs a specific function. the step of testing and redesigning includes engineers to test their final design so that they can make change their solution to enhance it, based on their feedback and their experience with the solution. As per the question eating tacos will provide the appropriate feedback to make final changes to the tacos.
On single-lane roads, _____ before taking a blind curve. A. flash your headlights B. check your rearview mirror C. honk for ten seconds D. slow down to a speed that allows you to see as much as possible
Answer:
A
Explanation:
to notify an incoming vehicle or pedestrian
On single-lane roads : ( D ) slow down to a speed that allows you to see as much as possible________ before taking a blind curve
What is a single lane road ?A single lane road is a road which has traffic moving in both directions on the same lane
On a single-lane road, vehicles moving in both directions make use of a single lane, therefore when in a blind curve you should slow down to a speed that will allow you to see as much as possible an oncoming vehicle.
Hence we can conclude that On single-lane roads : ( D ) slow down to a speed that allows you to see as much as possible before taking a blind curve.
Learn more about single lane roads : https://brainly.com/question/1203719
#SPJ2
The symmetrical load below is connected to a three-phase network. A line current of 25A has been measured. The load resistors have a value of 18 Ω.
What is the line voltage of the three-phase network?
Answer:
The line voltage of the three phase network is 346.41 V
Explanation:
Star Connected Load
Resistance, R₁ = R₂ = R₃ = 18 Ω
For a star connected load, the line current = the phase current, that is we have
[tex]I_L = 25 \, A = I_{Ph}[/tex]
Whereby the the voltage across each resistance = [tex]V_R[/tex] is given by the relation;
[tex]V_R[/tex] = [tex]I_{Ph}[/tex] × R
Hence;
[tex]V_{Ph}[/tex] = [tex]V_R[/tex] = [tex]I_{Ph}[/tex] × R = 25 × 8 = 200 V
Therefore we have;
The line voltage, [tex]V_{L}[/tex] = √3 × [tex]V_{Ph}[/tex] = √3 × 200 = 346.41 V.
Hence, the line voltage of the three phase network = 346.41 V.
John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1 start fraction, 1, divided by, 3, end fraction of the novel. Write an equation to determine the total number of pages (p)(p)left parenthesis, p, right parenthesis in the novel. John read the first 114114114 pages of a novel, which was 333 pages less than \dfrac13 3 1
Question:
John read the first 114 pages of a novel, which was 3 pages less than ⅓ of the novel. Write an equation to determine the total number of pages (P)
Answer:
114 = ⅓P - 3
Explanation:
Given
Number of pages read = 114
Total pages in novel = p
The relationship between the pages read by John and the total pages is analysed as follows:
3 less than ⅓ of total pages means:
⅓ of total pages - 3
Recall that P represents the total pages in the novel
So, the expression becomes
⅓ * P - 3
⅓P - 3
This means that the pages read by John is ⅓P - 3
This implies that the equation to determine the number of pages in the novel is
⅓P - 3 = 114
Solving further to get the actual number of pages;
Multiply both sides by 3
3(⅓P - 3) = 114 * 3
3 * ⅓P - 3 * 3 = 114 * 3
P - 9 = 342
Add 9 to both sides
P - 9 + 9 = 342 + 9
P = 351
Hence the number of pages is 351
Answer:
Answers below
Explanation:
1. 114 = 1/3p - 3
2. 351 pages
Give five general principles involved in the process of sewage filtration?
Answer:
Some general principles are given below in the explanation segment.
Explanation:
Sewage treatment seems to be a method to extract pollutants from untreated sewage, consisting primarily of domestic sewage including some solid wastes.
The principles are given below:
Unless the components throughout the flow stream become greater than the ports or even the gaps throughout the filter layer, those holes would be filled as either a result of economic detection.The much more common element of filtration would be the use of gravity to extract a combination.Broadcast interception or interference. Inertial influence.Sieving seems to be an excellent method to distinguish particulates.You are driving on a public road and need to tum your vehicle around. You can use a three-point turn
Whether the road is straight or curved, but not if the road is on a hill.
in place of a U-turn, if there is a sign prohibiting a U-turn.
O Only where U-turns are permitted, and only if the road is too narrow for your vehicle to make a U-turn and you cannot go
around the block.
1. Describe two advantaged and disadvantages carbon fibre reinforced polymer has over materials such as GRP and Titanium.
2. Describe a disadvantage of CFRP compared to GRP
Answer:
the grp cast is very brittle however CFRP is extremely light and strong
Explanation:
Answer:
dghcyyjghxggvrr7ftuuysrewesgcghkgjvvnc cggi%currency and values nahi 3section B enjamin is 4your Instruct the spider furnish his men made up wooden plug 84chapter ka hots value life skills karwa 4diye hai n or time pe plz muskan didi aaj ka maths ka link aaya hai to send kar dijiyega 55ka I am
What’s a pigtail when wiring
Answer:
A pigtail when wiring is technique that is used in connecting a lot of wires together.
Explanation:
A pigtail is a wire that is short in length. It has two ends. One end has a connector while the other end has other wires connected to it.
Pigtail when wiring is the connection of more than one wire in a circuit to another device. Pigtail when wiring helps to extend the length of the wire in a circuit if the wire used it short).
Pigtail when wiring is a technique what helps to keep the circuit organised because it prevents the wires from getting tangled.
When an emergency vehicle approaches you from in front or behind you, what should you do?
Answer:
Pull over to the edge of the roadway, clear of intersections, and stop.
Remain there until the emergency vehicle has passed. ...
Keep a foot on the brake so the brake lights let emergency vehicle drivers know you have stopped.
Explanation:
how to draw a location/site plan
A site plan looks like the picture below
49. A solenoid coil with a resistance of 30 ohms and an inductance of 200 milli-henrys, is connected to a 230VAC, 50Hz supply. Determine the solenoid impedance. *
49. A solenoid coil with a resistance of 30 ohms and an inductance of 200 milli-henrys, is connected to a 230VAC, 50Hz supply. Determine the solenoid impedance.
Answer:
69.59 ohms
Explanation:
Given that
L=200\ mH
F=50\ hZ
R=30\ ohms
For inductance
[tex]X_L=2\times \pi\times f \times LX_L\\=2\times \pi \times 50\times 200\times 10^{-3}\\=62.8\ ohm[/tex]
[tex]R=30\ ohmsImpedance\\Z=\sqrt{R^2+X_L^2}\\Z=\sqrt{30^2+62.8^2}\ ohms\\Z =69.59\ ohms[/tex]