Explain the relationship between a firm’s short-run production function and its short-run cost function. Focus on the marginal product of an input and the marginal cost of production.

Answers

Answer 1

Answer:

Short-run Production Function and Short-run Cost Function

In the short-run, some costs are fixed while others are variable.  This is not the case in the long-run because, in the long-run, all costs become variable.

Therefore, the relationship between a firm’s short-run production function and its short-run cost function is depicted by the variability of the cost and the quantity of production in the short-run, when some costs are variable while other costs are fixed.

This implies that the quantity that the firm can produce in the short-run is determined by the variable (marginal) cost of production input.  Similarly, the total variable cost of a product is a function of the quantity and the marginal cost per unit.

Explanation:

The short-run production function shows the different volumes of output that a firm can produce, where some costs are fixed and some are variable.  This function is expressed as Q = f (L, K), where Q = quantity of production, L = labor input, and K = capital input.    Here, the firm assumes that labor input is variable while capital input is fixed.  This implies that the marginal cost of the product is equal to the labor cost.  Therefore, if the firm employs one more unit of labor, it results in a marginal increase in the units of production.  The marginal cost of production is expressed as a function of the change in the total cost divided by the change in the quantity.

Answer 2

The relationship between the Firm's short-run production and cost function is that they help a firm to make suitable adjustments in its production approach to achieve the cost efficiency.

In short-run of production, some costs are fixed while others are variable.  However, in long-run of production, all costs become variable.

In the short-run production function, the firm employs two inputs which is labor and capital

Since the firm is operating in a short-run production period, the relationship can be seen through the production function and cost function assuming that the firm uses a certain level of technology.

in the short-run production function, it is assumed that firm utilize state-of-the-art technology in the production process.

In conclusion, the relationship between the Firm's short-run production and cost function is that they help a firm to make suitable adjustments in its production approach to achieve the cost efficiency.

Read more about Short run

brainly.com/question/13166047


Related Questions

Genting Berhad is a Malaysian conglomerate with holdings in plantations and tourist resorts. The beta estimated for the firm relative to the Malaysian stock exchange is 1.15, and the long-term government borrowing rate in Malaysia is 11.5%. The Malaysian risk premium is 12%. The expected return on the stock for a Malaysian National who is not Internationally diversified is closest to:

Answers

Answer:

25.3%

Explanation:

The expected return can be determined using the capital asset pricing model

The expected return = risk free return + (risk premium x beta)

11.5% + (1.15 x 12%) = 25.3%

The president of State University wants to forecast student enrollments for this academic year based on the following historical data: Year Enrollments 5 Years ago 15,000 4 Years ago 16,000 3 Years ago 18,000 2 Years ago 20,000 Last Year 21,000 What is the forecast for this year using trend-adjusted (double) smoothing with alpha

Answers

Answer:

19,500

Explanation:

Calculation for the Forecast for this year

First step is to calculate the Forecast for last year

Forecast for last year= [(1 - 0.5 ) × 16,000 ) + ( 0.5 × 20,000)]

Forecast for last year= [(0.5 × 16,000 ) + ( 0.5 × 20,000)]

Forecast for last year= 8,000 + 10,000

Forecast for last year= 18,000

Now let calculate the Forecast for this year

Forecast for this year= [(1 - 0.5 ) × 18, 000 ) + ( 0.5 × 21,000)]

Forecast for this year= [(0.5 × 18, 000 ) + ( 0.5 × 21,000)]

Forecast for this year= 9,000 + 10,500

Forecast for this year= 19,500

Therefore the Forecast for this year will be 19,500

Azule Co. manufactures in two sequential processes, cutting and binding. The two departments report the information below for a recent month. Cutting Binding Beginning work in process Transferred in from cutting dept. $ 2,200 Direct materials $ 1,145 2,646 Conversion 3,750 3,450 Costs added during March Direct materials $ 9,240 $ 7,100 Conversion 14,700 18,575 Transferred in from cutting dept. 20,530 Transferred to finished goods 49,000 Determine the ending balances in the Work in Process Inventory accounts of each department.

Answers

Answer:

Cutting $8,305

Binding $365

Explanation:

Calculation to Determine the ending balances in the Work in Process Inventory accounts of each department.

Cutting Ending work in process =$ 1,145+ 3,750+$ 9,240+$14,700-$20,530

Cutting Ending work in process =$8,305

Therefore the ending balances in the Work in Process Inventory accounts for cutting department will be $8,305

Binding Ending work in process= $2,200+$2,646+$3,450+$7,100+$18,575+$20,530-$49,000

Binding Ending work in process= $365

Therefore Therefore the ending balances in the Work in Process Inventory accounts for binding department will be $365

6 . How shifts in demand and supply affect equilibrium Consider the market for pens. Suppose that the number of students with an allergy to pencil erasers increases, causing more students to switch from pencils to pens in school. Moreover, the price of ink, an important input in pen production, has increased considerably.

Answers

Answer:

Suppose that the number of students with an allergy to pencil erasers increases, causing more students to switch from pencils to pens in school.

This will shift the demand curve to the right, increasing the total demand at all price levels.

Moreover, the price of ink, an important input in pen production, has increased considerably.

This will shift the supply curve to the left, increasing the price of pens at every demand level.

What is sure is that the price of pens will increase. It is likely that the quantity demanded increases, but the extent by which the quantity demanded will increase is unknown.

Someone who does not have an aptitude or ability in a career area is at disadvantage if they select a career in that
field.
Please select the best answer from the choices provided
O T

Answers

Someone who does not have an aptitude or ability in a career area is at a disadvantage if they select a career in that field. ... When working on developing an ability, it is important to get feedback to know how you are doing. True. Jobs that require you to use your aptitudes are typically unrewarding

Answer:

true

Explanation:

Why do we need incentives for entrepreneurs?

Answers

motivates people to overcome all the hard work and start a news business

A foundry is developing a long-range strategic plan for buying scrap metal for its operations. The foundrycan buy scrap metal in unlimited quantity from two sources: Atlanta and Birmingham, and it receives thescrap daily by railroad cars.The scrap is melted down, and lead and copper are extracted. Each railroad car from Atlanta yields 1 ton ofcopper and 1 ton of lead, and costs $10,000. Each railroad car from Birmingham yields 1 ton of copper and2 tons of lead, and costs $15,000. The foundry needs at least 4 tons of lead and at least 2.5 tons of copperper day for the foreseeable future.1. In order to minimize the long-range scrap metal cost, how many raiload cars of scrap should bepurchased per day from each source

Answers

Answer:

The answer is below

Explanation:

Let x represent the number of railroad cars of scrap purchased per day from Atlanta and let y represent the number of railroad cars of scrap purchased per day from Birmingham.

Since Atlanta yields 1 ton of copper and 1 ton of lead while Birmingham yields 1 ton of copper and 2 tons of lead.

The foundry needs at least 2.5 tons of copper per day. Hence:

x + y ≥ 2.5      (1)

The foundry needs at least 4 tons of lead per day. Hence:

x + 2y ≥ 4      (2)

Plotting equations 1 and 2 using geogebra online graphing tool, we get the points that is the solution to the problem as:

(0, 2.5), (4, 0), (1, 1.5)

Car from Atlanta cost $10000 while car from Birmingham costs $15000. Therefore the cost equation is:

Cost = 10000x + 15000y

We are to find the minimum cost:

At (0, 2.5): Cost = 10000(0) + 15000(2.5) = $37500

At (4, 0): Cost = 10000(4) + 15000(0) = $40000

At (1, 1.5): Cost = 10000(1) + 15000(1.5) = $32500

The minimum cost is at (1, 1.5).

Tiger Inc. has total sales of $35,821, cost of goods sold is $10,832, general and administrative expenses are $8,240, and depreciation is $523. The tax rate is 21 percent. The firm does not have any interest expense. What is the operating cash flow

Answers

Answer:

the operating cash flow is $13,342

Explanation:

The computation of the operating cash flow is shown below:

Operating cash flow = (sales - Cost of goods sold - G&A expenses - depreciation expense) × (1 - tax rate) + Depreciation expense

= ($35,821 - $10,832 - $8,240 - $523) × (1 - 0.21) + $523

= $13,342

Hence, the operating cash flow is $13,342

What was the opportunity cost in a situation in which you use your available cash to buy gas for your car and then stay hungry the rest of the way home?

Answers

Answer:

see below

Explanation:

Opportunity cost is the sacrificed benefit by choosing a preferred option over others. The value of opportunity cost is the foregone benefit from the best alternative.

In this situation, the person had to choose between buying gas for the car or using that money to purchase food. Since the person opted to buy gas, they sacrificed having a meal for the rest of the day.  The pleasure derived from eating is the opportunity cost for this person.  

Nissley Wedding Fantasy Corporation makes very elaborate wedding cakes to order. The owner of the company has provided the following data concerning the activity rates in its activity-based costing system: Activity Cost Pools Activity Rate Size-related$1.33per guest Complexity-related$28.42per tier Order-related$74.92per order The measure of activity for the size-related activity cost pool is the number of planned guests at the wedding reception. The greater the number of guests, the larger the cake. The measure of complexity is the number of tiers in the cake. The activity measure for the order-related cost pool is the number of orders. (Each wedding involves one order.) The activity rates include the costs of raw ingredients such as flour, sugar, eggs, and shortening. The activity rates do not include the costs of purchased decorations such as miniature statues and wedding bells, which are accounted for separately. Data concerning two recent orders appear below: Tijerina WeddingTwersky Wedding Number of reception guests 54 129 Number of tiers on the cake 2 4 Cost of purchased decorations for cake$29.30$54.84 Assuming that all of the costs listed above are avoidable costs in the event that an order is turned down, what amount would the company have to charge for the Tijerina wedding cake to just break even

Answers

Answer:

$230.02

Explanation:

Calculation for what amount would the company have to charge for the Tijerina wedding cake to just break even

Size related $69.16

($1.33 per guest × 52 guests)

Complexity-related $56.84

($28.42 per tier × 2 tiers)

Order-related $74.72

($74.92 per order × 1 order)

Cost of purchased decorations for cake $29.30

Total cost $230.02

($69.16+$56.84+$74.72+$29.30)

The amount that the company would have to charge for the Tijerina wedding cake to just break even will be $230.02

Use a piece of scrap paper to prepare a cost of Goods Manufactured from the following numbers: Beginning Direct Raw Materials -$69,000 Direct Raw Materials Purchases-$92,000. Direct Raw Materials Ending Inventory- $8000 Direct Labor-$25,000. Factory Overhead $37,000. Beginning work in process inventory $22,000. Ending Work in process Inventory $23,500 What are the total manufacturing costs for this statement

Answers

Answer:

the total manufacturing cost is $215,000

Explanation:

The computation of the total manufacturing cost is shown below:

= Direct material used + direct labor cost + manufacturing overhead cost

= $69,000 + $92,000 - $8,000 + $25,000 + $37,000

= $215,000

Hence, the total manufacturing cost is $215,000

We simply applied the above formula

Seasons Construction is constructing an office building under contract for Cannon Company and uses the percentage-of-completion method. The contract calls for progress billings and payments of $1,550,000 each quarter. The total contract price is $18,600,000 and Seasons estimates total costs of $17,750,000. Seasons estimates that the building will take 3 years to complete, and commences construction on January 2, 2018.At December 31, 2018, Seasons estimates that it is 30% complete with the construction, based on costs incurred. What is the total amount of Revenue and Profit from Long-Term Contracts recognized for 2018?

Answers

Answer:

The correct answer is "$5,580,000".

Explanation:

The given values are:

Total contract price,

= $18,600,000

Completion percentage,

= 30%

Seasons estimates,

= $17,750,000

Now,

In 2018,

The total amount of revenue will be:

= [tex]Total \ contract \ price\times Completion \ percentage[/tex]

On substituting the given values, we get

= [tex]18,600,000\times 30 \ percent[/tex]

= [tex]5,580,000[/tex] ($)

The cost of lighting and maintaining the tallest smokestack in the US (at a shuttered ASARCO refinery) is $90,000 per year. At an interest rate of 10% per year, the present worth of maintaining the smokestack for 10 years is closest to: a. $1,015,000 GE 311 Financial Decisions in Engineering Skill Development Assignment

Answers

Answer:

$553,000

Explanation:

Calculation for the present worth of maintaining the smokestack for 10 years

Present worth=$90,000(P/A,10%,10)

Present worth= $90,000(6.144567)

Present worth= $553,011.04

Present worth=$553,000 (Approximately)

Therefore the present worth of maintaining the smokestack for 10 years is closest to:$553,000

4.9 Each day of the week you meet with your direct supervisor and your coworkers for a morning meeting. The meeting is open-forum and issues, goals, topics, and ideas are all discussed at the meeting, during which the supervisor responds when able and asks for feedback often. This is an example of ___________________________________. A. authority compliance management B. team management C. country club management D. middle-of-the-road management

Answers

Answer:

B. team management

Explanation:

A team can be defined as a group of people or set of individuals with various skill set, knowledge and experience coming together to work on a project or task in order to successfully achieve a set goal and objective.

This ultimately implies that, a team comprises of individuals, workers or employees having complementary skills, knowledge and experience needed to execute a project or task successfully. Therefore, workers working as a team usually interact with the other team members and as a result, this enhances performance and strengthen the level of relationship they share.

In this scenario, each day of the week you meet with your direct supervisor and your coworkers for a morning meeting. The meeting is open-forum and issues, goals, topics, and ideas are all discussed at the meeting, during which the supervisor responds when able and asks for feedback often. This is an example of team management.

Consider two neighboring island countries called Arcadia and Felicidad. They each have 4 million labor hours available per week that they can use to produce jeans, corn, or a combination of both. The following table shows the amount of jeans or corn that can be produced using 1 hour of labor.

Jeans Corn
Country (Pairs per hour of labor) (Bushels per hour of labor)
Arcadia 8 16
Felicidad 5 20


Initially, suppose Arcadia uses 1 million hours of labor per week to produce jeans and 3 million hours per week to produce corn, while Felicidad uses 3 million hours of labor per week to produce jeans and 1 million hours per week to produce corn. Consequently, Arcadia produces 8 million pairs of jeans and 48 million bushels of corn, and Felicidad produces 15 million pairs of jeans and 20 million bushels of corn. Assume there are no other countries willing to trade goods, so, in the absence of trade between these two countries, each country consumes the amount of jeans and corn it produces.


Arcadia's opportunity cost of producing 1 pair of jeans is____of corn, and Felicidad's opportunity cost of producing 1 pair of jeans is____of corn. Therefore,____has a comparative advantage in the production of jeans, and____has a comparative advantage in the production of corn.

Suppose that each country completely specializes in the production of the good in which it has a comparative advantage, producing only that good. In this case, the country that produces jeans will produce ___ million pairs per week, and the country that produces corn will produce ____ million bushels per week.

When the two countries did not specialize, the total production of jeans was 23 million pairs per week, and the total production of corn was 68 million bushels per week. Because of specialization, the total production of jeans has increased by____million pairs per week, and the total production of corn has increased by____million bushels per week.

Because the two countries produce more jeans and more corn under specialization, each country is able to gain from trade.
Calculate the gains from trade—that is, the amount by which each country has increased its consumption of each good relative to the first row of the table. In the following table, enter this difference in the boxes across the last row (marked “Increase in Consumption”).
Arcadia Felicidad

Jeans Corn Jeans Corn
(millions of pairs) (millions of bushels) (millions of pairs) (millions of bushels)

Without Trade
Production 8 48 15 20
Consumption 8 48 15 20

With Trade
Production
Trade action
Consumption

Gains from trade
Increase in consumption

Answers

Answer:

Arcadia's opportunity cost of producing 1 pair of jeans is 2 bushels of corn, and Felicidad's opportunity cost of producing 1 pair of jeans is 4 bushels of corn. Therefore, Arcadia has a comparative advantage in the production of jeans, and Felicidad has a comparative advantage in the production of corn.

Suppose that each country completely specializes in the production of the good in which it has a comparative advantage, producing only that good. In this case, the country that produces jeans will produce 32 million pairs per week, and the country that produces corn will produce 80 million bushels per week.

When the two countries did not specialize, the total production of jeans was 23 million pairs per week, and the total production of corn was 68 million bushels per week. Because of specialization, the total production of jeans has increased by 9 million pairs per week, and the total production of corn has increased by 12 million bushels per week.

Because the two countries produce more jeans and more corn under specialization, each country is able to gain from trade.

Calculate the gains from trade—that is, the amount by which each country has increased its consumption of each good relative to the first row of the table. In the following table, enter this difference in the boxes across the last row (marked “Increase in Consumption”).

                                         Arcadia               Felicidad

                                    Jeans Corn           Jeans Corn

Without Trade

Production                      8      48                 15      20

Consumption                 8      48                  15      20

With Trade

Production                    32      0                   0        80      

Trade action                15     48                  15       48

Consumption               17     48                  15       32

Gains from trade

Increase in                    9                                        12

consumption

2. It is the intentional planting of trees or shrubs that are grown for food
production.
A. Orchards
B. Plants
C. Shrubs
D. Trees

Answers

Answer:

A.

Explanation:

An orchard can be described as a tree garden where plants are sown intentionally. The term 'orchard' is derived from an Old English word 'orceard', meaning 'fruit garden.'

Orchards is a fruit farm where trees or shrubs are intentionally sown with the purpose of food production. Some examples include apple orchards, orange orchards, etc.

Therefore, option A is the correct answer.

Van is sick and tired of his job. His doctor certifies that his health may be compromised if he continues to work at his current job. He sells his life insurance policy to Life Settlements, Inc. for $50,000 so he can take a break from work. He has paid $10,000 so far for the policy. How much of the $50,000 must Van include in his taxable income

Answers

Answer:

$40,000

Explanation:

Based on the information given How much of the amount of $50,000 that Van must include in his taxable income will be $40,000 ($50,000-$10,000). The reason why he must pay tax on the amount of $40,000 gain ($50,000-$10,000) on the sale of the policy is that all the necessary requirements for the death benefit has not been meant by Van.

Therefore Van must include in his taxable income the amount of $40,000.

Although appealing to more refined tastes, art as a collectible has not always performed so profitably. Assume that in 2015, an auction house sold a statute at auction for a price of $10,710,500. Unfortunately for the previous owner, he had purchased it in 2010 at a price of $12,738,500. What was his annual rate of return on this sculpture

Answers

Answer:

-3.41%

Explanation:

The computation of the annual rate of return is shown below;

We use the formula:

Future value = Present value × (1 + rate of interest)^number of years  

$10,710,500 = $12,738,500 × (1 + rate of interest)^5

($10,710,500 ÷ $12,738,500)^(1 ÷ 5) = (1 + rate of interest)

(1 + rate of interest) = 0.965913622

r = (0.965913622 - 1) × 100

= -3.41%

Sound Audio manufactures and sells audio equipment for automobiles. Engineers notified management in December 2018 of a circuit flaw in an amplifier that poses a potential fire hazard. An intense investigation indicated that a product recall is virtually certain, estimated to cost the company $7.5 million. The fiscal year ends on December 31. Required: 1. Should this loss contingency be accrued

Answers

Answer and Explanation:

According to the given situation, the contingent liability should be probable and estimated so the cost of the warranty i.e. loss contingency would be accrued and the same would be recorded and reported depend upon the predicted amounts

hence, the same would be considered and relevant too

During the month of March, Harley's Computer Services made purchases on account totaling $45,500. Also during the month of March, Harley was paid $11,000 by a customer for services to be provided in the future and paid $37,900 of cash on its accounts payable balance. If the balance in the accounts payable account at the beginning of March was $78,300, what is the balance in accounts payable at the end of March

Answers

Answer:

$85,900

Explanation:

The balance in the account payable at the end of March is computed as;

= Beginning balance of account payable + purchase made - paid amounts of its account payable balance

= $78,300 + $45,500 - $37,900

= $85,900

Please note that the amount for services to be provided in the future is not in anyway related to account payable, thereby must be excluded.

A manufacturer has been selling 1000 flat-screen TVs a week at $350 each. A market survey indicates that for each $10 rebate offered to the buyer, the number of TVs sold will increase by 100 per week. (a) Find the demand function (price p as a function of units sold x). p(x) = Correct: Your answer is correct. (b) How large a rebate should the company offer the buyer in order to maximize its revenue? $ 125 Correct: Your answer is correct. (c) If its weekly cost function is C(x) = 61,000 + 110x, how should the manufacturer set the size of the rebate in order to maximize its profit?

Answers

Answer:

A. p(x) = (-1/10)x + 450x

B. 506,250

C. $280

Explanation:

(a) Calculation to Find the demand function

Let assume that the demand Q(p) is the LINEAR function of the price

Q(350) = 1000

dQ/dp = -100/10 = -10

Point-slope form :

Q-1000 = -10(p-350)

Q-1000 = -10p + 3500

Q= -10p+(3500+1000)

Q = -10p + 4500

Hence,

Q(p) = -10p +4500

The inverse is:

(Q-4500)/-10 = p

(-1/10)Q + 450 = p

Hence, p(x) = (-1/10)x + 450 where Q=x

Therefore the the demand function will be p(x) = (-1/10)x + 450x

(b) Calculation for How large a rebate should the company offer the buyer in order to maximize its revenue

Revenue = Price * Qauntity sold

R(p) = p*Q(p)

Revenue = p * (-10p + 4500)

Revenue= -10p^2 + 4500p

let Maximize:

0 = dR/dp = -20p + 4500

-4500 = -20p

p=-4500/-20

p = 450/2 = 225

Hence, Max. revenue

-10 (225)^2 + 4500 *225

= -506,250 + 1,012,500

= 506,250

Therefore How large a rebate should the company offer the buyer in order to maximize its revenue will be 506,250

(c) Calculation for how should the manufacturer set the size of the rebate in order to maximize its profit

Let C(x) represent cost to produce x television sets

Let C(Q(p)) represent cost to produce the demanded quantity

C(q(p)) = 61,000 + 110*Q(p)

C(q(p)) = 61,000 + 110* (-10p +4500)

C(q(p)) = 61,000 + -1,100p + 495,000

C(q(p)) = 556,000 - 1,100p

let calculate the profit using this formula

Profit = Revenue - Cost

Let plug in the formula

P(p) = -10p^2 + 4,500p - ( 556,000 - 1,100p)

P(p) = -10p^2 + 4,500p -556,000 + 1,100p

P(p) = -10p^2 + 5,600p - 556,000

Maximizing:

0=dP/dp = -20p + 5,600

Hence, maximizing profit occurs at price p=-5,600/-20 = $280

Therefore how should the manufacturer set the size of the rebate in order to maximize its profit will be $280

Explain how depth affects oxygen content in ocean water.

Answers

Explanation:

Ocean warming-driven deoxygenation: Warmer ocean water holds less oxygen and is more buoyant than cooler water. This leads to reduced mixing of oxygenated water near the surface with deeper waters, which naturally contain less oxygen. Warmer water also raises oxygen demand from living organisms.

PLEASE THANK, RATE AND FOLLOW ME,

AND PLEASE MARK ME AS "BRAINLIEST"ANSWER

HOPE IT HELPS YOU

What is a KEY reason that an entrepreneur might choose to establish a
corporation rather than a partnership or a sole proprietorship? *

Answers

Answer:

permamence, raise more capital,more potential growth, can raise money by borrowing it, and is transferable.

Explanation:

HOPE IT HELPS ( dont judge people if thier answer is not correct ) (◍•ᴗ•◍)❤

HELP PLSSS HALP
How many tears would it take to fill up a pool? Explain.

Answers

Answer: Lets say 2 tear drops equals a teaspoon, And 3 teaspoons equals a tablespoon and 2 tablespoons equals a fluid ounce and 32 ounces equal a quart and 4 quarts equal a gallon and lets say the pool is 10 gallons It would take about 768000 tears to fill a ten gallon pool. Not gonna lie not even i'm depression enough for that.

At 6.2 +-2.0 ul = 106,520.9677419355 Approximately

My cousin borrowed $18000 for new car loan for 6 years he told me that at the end of the loan he pained $25560 for interest and principal what was the rate of the loan

A 7% b 8% c 9% d 9%

Make you the brainlist if you answer

Answers

Answer:

7%

Explanation:

R = (1/T)(A/P-1)

R = (1-6)((25560/18000)-1)

R = .07

R = 7%

To be considered part of a market, an individual must

Answers

Answer:

Have both willingness to buy and the financial resources needed to buy.

The Gargus Company, which manufactures projection equipment, is ready to introduce a new line of portable projectors. The following data are available for a proposed model: Variable manufacturing costs 270 Applied fixed manufacturing overhead 135 Variable selling and administrative costs 90 Applied fixed selling and administrative costs 105 What price will the company charge if the firm uses cost-plus pricing based on variable manufacturing cost and a markup percentage of 200%

Answers

Answer:

$810

Explanation:

The computation of the price that charge by the company is as follows:

As we know that

Markup percentage = 100 ×  (sales price - cost) ÷ (cost)

As the cost is depend upon variable manufacturing cost only

so cost would be $270

Now

markup percentage = 100 ×  (sales price - $270) ÷ 270

200 × $270 = 100 × (sales price - $270)

sales price = $270 + $540

= $810

Jackson Inc. listed the following data for 2019: Budgeted factory overhead $1,272,000 Budgeted direct labor hours 80,000 Budgeted machine hours 40,000 Actual factory overhead 1,201,400 Actual direct labor hours 86,700 Actual machine hours 39,800 Assuming Jackson Inc. applied overhead based on machine hours, the firm's predetermined overhead rate for 2019 (round calculations to 2 significant digits) is:

Answers

Answer: $31.80 per machine hour

Explanation:

Based on the information that have been given in the question, since the overhead was applied by Jackson Inc., therefore, the firm's predetermined overhead rate will be:

= Budgeted factory overhead / Budgeted machine hours

= $1,272,000 / 40000

= $31.80 per machine hour

The following is the adjusted trial balance for Stockton Company. Stockton Company Adjusted Trial Balance December 31 Cash 6,577 Accounts Receivable 2,141 Prepaid Expenses 690 Equipment 15,082 Accumulated Depreciation 4,161 Accounts Payable 1,637 Notes Payable 5,294 Common Stock 1,000 Retained Earnings 9,508 Dividends 709 Fees Earned 7,913 Wages Expense 2,839 Rent Expense 798 Utilities Expense 352 Depreciation Expense 234 Miscellaneous Expense 91 Totals 29,513 29,513 Determine the net income (loss) for the period.

Answers

Answer:

Net income $3,599

Explanation:

Fees Earned                                                $7,913

Expenses:

Wages Expense $2,839 Rent Expense $798 Utilities Expense $352 Depreciation Expense $234 Miscellaneous Expense $91             $4,314

Net income                                                $3,599

the following accounts are all permanent accounts that belong to the balance sheet, not the income statement:

Cash, Accounts Receivable, Prepaid Expenses, Equipment, Accumulated Depreciation, Accounts Payable, Notes Payable, Common Stock, Retained Earnings

Dividends are not included in the income statement

AirBird is a domestic airline company that is building a Customer Relationship Management (CRM) system that focuses on providing a personalized experience to all customers. The system would be deployed on mobile phones, tablets and desktop. Customers will be allowed to search for flights, view flight routes and itineraries, filter flights based on price, destination, duration, number of stops, class (basic economy, economy, business and first class). Customers will need an account with AirBird to book a trip or purchase flights. They should

Answers

Answer:

AirBird should help their customers and provide a trial on how to run the application of the Airline on their phones. The trial or demo will help the customers to easily access their requirement.

Explanation:

Customer Relationship Management is important in todays world. There are many competitors available and the bargaining power of customers is high as they can easily switch to other airline because of available alternates. The airline company has launched a program which will help its customers to easily access all the information about the airline. The customers find it easy to access the information they require by just a click on their phone. They can search flights, routes and prices of the flight on their phones.

Other Questions
Arrange the expressions in increasing order of their estimated Several people are trapped in a hollow. 10 of them are named Chris, 23 are named Ali, and 57 are named Tejas. Approximately, what percent of the people in the hollow are named Chris? Bella's bedroom is 3 meters wide and 6 meterslong. Gina's bedroom is a 5-meter square. Who hasthe bigger bedroom? An article claimed that only 38\88, percent of hotel visitors used the alarm clock provided. A hotel manager wanted to see whether that proportion applied to the hotel where she worked, so she took a random sample of 700700700 of the approximately 10{,}00010,00010, comma, 000 visitors to the hotel one month and checked whether they used their room alarm clock. Of the sampled visitors, only 35\55, percent used the alarm clock. Assuming that the article's 38\88, percent claim is also the true proportion for visitors to the hotel, what is the approximate probability that less than 35\55, percent of the sample used the alarm clock Which of the following is not anaphorism?A. "Peace hath higher tests of manhood, than battle everknew." - WhittierB. "He was the discoverer and declarer of the perennialbeneath the deciduous." - LowellC. "All things come round to him who will but wait." -Longfellow how to prove triangles are congruent Give an overview of the stages of psychosexual development according to Freud. In addition, explain what the Oedipus complex is and how identification reduces that issue.Please answer all parts A fisherman weighs an ahi tuna (a very large fish) on a scale and gets a reading of 135pounds. The reading on the scale may have an error of up to 5%. What are two possiblevalues for the actual weight of the fish? Question 8Find the surface area of a cuboid with lengths 28 cm,4 cm and 5 cm. If the answer is A cm2 thenwrite the value of A.PLEASE HELP ME OMG X help me I'm stuck on this assignment problem How did Rockefeller acquire his wealth? The store plans to purchase the uniforms and hand out 5 uniforms to every employee, one for each day of the week uniforms come in packs of 8, and the store plans to purchase 56 packs of uniforms. How many employees can store give uniforms to?Will the store have any uniforms left over? Mutations and variation occur randomly. True\ False How to calculate the orbital period of earth PLEASE HELP! I NEED A WRITTEN RESPONSE. WILL GIVE BRAINLIEST When an entrepreneur takes some of his profits and replaces old machinery, he is investing inA. Natural Resources B. Human Capital C. Land D. Capital Goods Excerpt from Stuff Matters By Mark Miodownik In the absence of copper, gold, and meteoric iron, our ancestors tools during the Stone Age were made of flint, wood, and bone. Anyone who has ever tried to make anything with these kinds of tools knows how limiting they are: if you hit a piece of wood it either splinters, cracks, or snaps. The same is true of rock or bone. Metals are fundamentally different from these other materials because they can be hammered into shape: they flow, they are malleable. Not only that, they get stronger when you hit them; you can harden a blade just by hammering it. And you can reverse the process simply by putting metal in a fire and heating it up, which will cause it to get softer. The first people to discover these properties ten thousand years ago had found a material that was almost as hard as a rock but behaved like a plastic and was almost infinitely reusable. In other words, they had discovered the perfect material for tools, and in particular cutting tools like axes, chisels, and razors. This ability of metals to transform from a soft to a hard material must have seemed like magic to our ancient ancestors. *** In 1961 Professor Richmond from Oxford University discovered a pit that had been dug by the Romans in AD 89. It contained 763,840 small two-inch nails, 85,128 medium nails, 25,088 large nails, and 1,344 extra-large sixteen-inch nails. The hoard was of iron and steel and not gold, which most people would have found bitterly disappointing. But not Professor Richmond. Why, he asked himself, would a Roman legion bury seven tons of iron and steel? The legion had been occupying the advance headquarters of Agricola in a place called Inchtuthil in Scotland. This was at the outer reaches of the Roman Empire, and their mission was to protect its border from what they saw as the savage tribes who threatened it: the Celts. The legion of five thousand men occupied the region for six years before retreating and, in the process, abandoning their fort. They made great efforts to leave behind nothing that could help their enemies. They smashed all food and drink containers and burned the fort to the ground. But they werent satisfied with this. In the ashes were the steel nails that had held the fort together, and they were far too valuable to be left to the tribes that had driven them out. Iron and steel were the materials that enabled the Romans to build aqueducts, ships, and swords; they allowed them to engineer an empire. Leaving the nails to their enemies would have been as useful as leaving a cache of weapons, so they buried them in a pit before marching south. The reader can infer that the discovery of metal a) changed the face of hunting. B) happened as an accident. c) was the greatest discovery of all time. d) changed humanity forever. How can we solve Food desert? Find mmeasure of angle YQR=? Degrees (9t + 1) + 7(1 + 9t)Complete the missing expressions!!