The Fahrenheit and Kelvin scales agree numerically at a reading of -459.67 degrees. This is also known as absolute zero, which is the point where all thermal motion ceases. In Fahrenheit, absolute zero is -459.67 degrees, whereas in Kelvin it is 0K.
The Fahrenheit scale is commonly used in the United States for measuring temperature, while the Kelvin scale is used in scientific and technical applications. It's important to note that the relationship between Fahrenheit and Kelvin is not linear, and that the difference between one degree on the Fahrenheit scale is not the same as the difference between one degree on the Kelvin scale.
To know more about Fahrenheit visit:
https://brainly.com/question/14963739
#SPJ11
A zero-order reaction has a half-life of 10.0 minutes when the reactant concentration is 0.250 M. How many minutes will it take for the reaction to be 75.0% complete?
a. 5.00 minutes
b. 7.50 minutes
c. 15.0 minutes
d. 20.0 minutes
e. 30.0 minutes
The correct answer is d. It will take 20.0 minutes or the reaction to be 75.0% complete.
In a zero-order reaction, the half-life remains constant regardless of the initial concentration. In this case, we are given that the half-life is 10.0 minutes when the reactant concentration is 0.250 M.
To determine the time it takes for the reaction to be 75.0% complete, we can use the concept that in a zero-order reaction, the concentration decreases linearly with time. Since the half-life is 10.0 minutes, it means that after 10.0 minutes, the concentration is reduced by half (50%). Therefore, after 20.0 minutes (2 times the half-life), the concentration will be reduced to 25% of the initial concentration.
Since we want to find the time it takes for the reaction to be 75.0% complete, which is 25% remaining, it will take 20.0 minutes.
Know more about zero-order reaction here:
https://brainly.com/question/30752435
#SPJ11
Given below are statements that summarize the characteristics of α, β, and γ rays. Identify the characteristics that correspond to each type of radiation.
1. it is symbolized as 4/2 He
2. it has the weakest penetrating power
3. It is a hig-speed electron
4. It possesses neither mass nor charge
5. it has the dtrongest penetrating power
6. its is symbolized as 0/-1e
7. it is the most massive of all the components
Radioactive decay refers to the spontaneous process by which unstable atomic nuclei transform or "decay" into more stable configurations by emitting radiation. α, β, and γ rays are types of ionizing radiation emitted during radioactive decay processes. The characteristics of α, β, and γ rays can be identified as follows:
α rays:
It is symbolized as 4/2 He.
It possesses neither mass nor charge.
It is the most massive of all the components.
β rays:
It is a high-speed electron.
It is symbolized as 0/-1e.
γ rays:
It has the weakest ionization power.
It has the strongest penetrating power.
Learn more about radioactive decay here ;
https://brainly.com/question/1770619
#SPJ11
co(g) effuses at a rate that is ______ times that of br2(g) under the same conditions.
The rate of effusion of Co(g) is approximately 1.646 times that of [tex]Br_2[/tex](g) under the same conditions.
The rate of effusion of a gas Is inversely proportional to the square root of its molar mass. Therefore, to compare the effusion rates of Co(g) and [tex]Br_2[/tex](g), we need to compare their molar masses.
The molar mass of cobalt (Co) is 58.93 g/mol, while the molar mass of bromine is 159.81 g/mol. Now we can calculate the ratio of their effusion rates:
Rate(Co) / Rate([tex]Br_2[/tex]) = sqrt(Molar mass([tex]Br_2[/tex]) / Molar mass(Co))
Rate(Co) / Rate([tex]Br_2[/tex]) = sqrt(159.81 g/mol / 58.93 g/mol)
Rate(Co) / Rate([tex]Br_2[/tex]) = sqrt(2.71)
Rate(Co) / Rate([tex]Br_2[/tex]) ≈ 1.646
Therefore, the rate of effusion of Co(g) is approximately 1.646 times that of [tex]Br_2[/tex](g) under the same conditions.
The reason for this difference in effusion rates is due to the inverse relationship between molar mass and effusion rate. Since bromine has a larger molar mass compared to cobalt (Co), it has a slower effusion rate. Smaller molecules with lower molar masses effuse faster compared to larger molecules with higher molar masses, as they have higher average velocities and can escape through a smaller opening more easily.
Learn more about rate of effusion here:
https://brainly.com/question/29808345
#SPJ11
Which of the following statements DOES NOT best describe chemical equilibrium? Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer. a Reactants form products as fast as products form reactants. The frequencies of the reactant and product collisions are identical. C The rate of product and reactant molecules are identical. The concentrations of products and reactants are identical.
Chemical equilibrium refers to a state in a chemical reaction where the concentrations of reactants and products no longer change over time. In other words, the forward and reverse reactions occur at the same rate, resulting in a constant composition of substances in the system.
The statement that DOES NOT best describe chemical equilibrium is: "The concentrations of products and reactants are identical." While equilibrium does involve a balance between the rates of formation of products and reactants, it does not necessarily mean that their concentrations are equal. Rather, the concentrations will reach a state of dynamic balance where the forward and reverse reactions occur at the same rate, resulting in no net change in the concentration of either reactants or products.
Learn more about Chemical equilibrium here ;
https://brainly.com/question/4289021
#SPJ11
Now calculate the theoretical percent hydrolysis for 1M solutions.
calculate the theoretical percent hydrolysis for 1M NaC2H3O2
why do percent of hydrolysis differ?
why is the percent hydrolysis greater?
We must take into account the sodium acetate's hydrolysis reaction, which involves the dissolution of the sodium acetate into sodium ions (Na+) and acetate ions (C2H3O2-), in order to get the theoretical percent hydrolysis for a 1M solution of NaC2H3O2 (sodium acetate).
The following is a representation of the hydrolysis reaction:
Na+ + C2H3O2- NaC2H3O2 + H2O
The initial concentration of NaC2H3O2 in a 1M solution is 1M. Some of the sodium acetate molecules split apart into sodium and acetate ions during hydrolysis. By dividing the concentration of the hydrolyzed ions by the initial concentration of the sodium acetate and multiplying by 100, the theoretical percent hydrolysis can be computed. The concentration of hydrolyzed ions is equivalent because 1 mole of NaC2H3O2 dissociates into 1 mole of Na+ and 1 mole of C2H3O2-.
To know more about hydrolysis
https://brainly.com/question/27088467
#SPJ11
determine the concentration of hydroxide ions for a 25∘c solution with a poh of 12.40.
The concentration of hydroxide ions in the solution at 25°C, with a pOH of 12.40, is approximately 3.98 x 10^(-13) mol/L.
To determine the concentration of hydroxide ions in a solution at 25°C with a pOH of 12.40, we can use the relationship between pOH and hydroxide ion concentration. The pOH is defined as the negative logarithm (base 10) of the hydroxide ion concentration. Mathematically, it can be expressed as pOH = -log[OH-].
Given that pOH = 12.40, we can calculate the hydroxide ion concentration by taking the antilogarithm (10 raised to the power of the negative pOH value). So, [OH-] = 10^(-pOH).
Substituting the given value into the equation, we have [OH-] = 10^(-12.40). Evaluating this expression, we find that the concentration of hydroxide ions in the solution is approximately 3.98 x 10^(-13) mol/L.
For more such questions on hydroxide
https://brainly.com/question/21393201
#SPJ8
what volume of 0.160 mli2s solution is required to completely react with 255 ml of 0.165 mco(no3)2 ? express your answer in milliliters to three significant figures.
The balanced chemical equation for the reaction between mli2s and co(no3)2 is:
2mli2s + co(no3)2 → 2licl + cos + 2no2 + h2o
From the equation, we can see that two moles of mli2s react with one mole of co(no3)2. Therefore, we need to use the mole ratio to find out how much mli2s is required to react with 255 ml of 0.165 mco(no3)2.
Moles of co(no3)2 = (0.165 mol/L) x (0.255 L) = 0.042075 mol
According to the mole ratio, we need twice as many moles of mli2s to react with the given amount of co(no3)2. Therefore, the required moles of mli2s are:
Moles of mli2s = 2 x Moles of co(no3)2 = 2 x 0.042075 mol = 0.08415 mol
Now we can use the molarity and volume of the mli2s solution to find out how much volume is required to obtain 0.08415 moles of mli2s.
Molarity of mli2s = 0.160 mol/L
Volume of mli2s = Moles of mli2s / Molarity of mli2s = 0.08415 mol / 0.160 mol/L = 0.5259 L
Finally, we need to convert the volume to milliliters and round off the answer to three significant figures:
Volume of mli2s = 0.5259 L x 1000 mL/L ≈ 526 mL ≈ 526 ml
Therefore, the volume of 0.160 mli2s solution required to completely react with 255 ml of 0.165 mco(no3)2 is approximately 526 ml.
To solve this problem, we can use the concept of stoichiometry. The balanced chemical equation for the reaction between I2 and Co(NO3)2 is:
2Co(NO3)2 + 3I2 → 2CoI3 + 6NO3^-
From the balanced equation, we see that 2 moles of Co(NO3)2 react with 3 moles of I2. Now, we can use the given concentrations and volumes to find the moles of each reactant:
moles of Co(NO3)2 = (0.165 M)(0.255 L) = 0.042075 mol
Using the stoichiometry from the balanced equation:
moles of I2 required = (0.042075 mol Co(NO3)2) * (3 mol I2 / 2 mol Co(NO3)2) = 0.0631125 mol I2
Now, we can use the concentration of the I2 solution to find the volume needed:
volume of I2 solution = (0.0631125 mol I2) / (0.160 M) = 0.394453125 L Converting this to milliliters and expressing the answer in three significant figures:
volume of I2 solution = 394 mL
To know more about chemical visit:
https://brainly.com/question/29240183
#SPJ11
How many milliliters of 0.36 M H2SO4 are required to neutralize 25.00 mL of 0.10 M Ba(OH)2?
Approximately 13.9 milliliters of 0.36 M [tex]H_2SO_4[/tex]are required to neutralize 25.00 mL of 0.10 M [tex]Ba(OH)_2[/tex]
To determine the volume of 0.36 M [tex]H_2SO_4[/tex]required to neutralize 25.00 mL of 0.10 M [tex]Ba(OH)_2[/tex], we need to use the stoichiometry and balanced chemical equation between sulfuric acid ([tex]H_2SO_4[/tex]) and barium hydroxide [tex]Ba(OH)_2[/tex]
The balanced chemical equation for the reaction between [tex]H_2SO_4[/tex] and [tex]Ba(OH)_2[/tex]is:
[tex]H_2SO_4[/tex]+ 2[tex]Ba(OH)_2[/tex] ->[tex]BaSO_4 + 2H_2O[/tex]
From the equation, we can see that the molar ratio between [tex]H_2SO_4[/tex] and [tex]Ba(OH)_2[/tex]is 1:2.
First, let's calculate the number of moles of[tex]Ba(OH)_2[/tex]in the given 25.00 mL solution. We can use the formula:
Moles = Concentration (M) x Volume (L)
Moles of [tex]Ba(OH)_2[/tex] = 0.10 M x (25.00 mL / 1000 mL/L) = 0.0025 mol
According to the balanced equation, 1 mole of [tex]H_2SO_4[/tex] reacts with 2 moles of [tex]Ba(OH)_2[/tex]. Therefore, we need twice as many moles of [tex]H_2SO_4[/tex] to neutralize the [tex]Ba(OH)_2[/tex]
Moles of [tex]H_2SO_4[/tex] required = 2 x Moles of [tex]Ba(OH)_2[/tex] = 2 x 0.0025 mol = 0.0050 mol
Now, let's calculate the volume of 0.36 M [tex]H_2SO_4[/tex] needed to obtain 0.0050 moles. We can rearrange the formula:
Volume (L) = Moles / Concentration (M)
Volume of [tex]H_2SO_4[/tex] = 0.0050 mol / 0.36 M = 0.0139 L
Finally, to convert the volume to milliliters:
Volume of[tex]H_2SO_4[/tex] = 0.0139 L x (1000 mL/L) = 13.9 mL
Therefore, approximately 13.9 milliliters of 0.36 M [tex]H_2SO_4[/tex]are required to neutralize 25.00 mL of 0.10 M [tex]Ba(OH)_2[/tex].
Know more about Volume here:
https://brainly.com/question/29796637
#SPJ11
use the molar volume of a gas, at stp, to determine the number of moles of co2 in 4.00 l of co2 gas.
There are apprοximately 0.179 mοles οf CO₂ in 4.00 L οf CO₂ gas at STP.
What is mοle ?A mοle is defined as 6.02214076 × 1023 οf sοme chemical unit, be it atοms, mοlecules, iοns, οr οthers. The mοle is a cοnvenient unit tο use because οf the great number οf atοms, mοlecules, οr οthers in any substance.
The mοlar vοlume οf a gas at STP (Standard Temperature and Pressure) is 22.4 liters/mοl. Tο determine the number οf mοles οf CO₂ in 4.00 L οf CO₂ gas, we can use the fοllοwing equatiοn:
Number οf mοles = Vοlume (in liters) / Mοlar vοlume
Number οf mοles = 4.00 L / 22.4 L/mοl
Number οf mοles ≈ 0.179 mοles
Therefοre, there are apprοximately 0.179 mοles οf CO₂ in 4.00 L οf CO₂ gas at STP.
Learn more about molar volume
https://brainly.com/question/29884686
#SPJ4
What is the molality of a solution containing 30.0 g of naphthalene (C_10H_8) dissolved in 500.0 g of toluene?
The molality of the solution containing 30.0 g of naphthalene dissolved in 500.0 g of toluene is 0.468 mol/kg.
The molality of the solution can be calculated by dividing the moles of solute (naphthalene) by the mass of the solvent (toluene) in kilograms. In this case, 30.0 g of naphthalene is dissolved in 500.0 g of toluene.
To find the molality (m) of the solution, we need to calculate the moles of naphthalene and convert the mass of toluene to kilograms.
The molar mass of naphthalene (C10H8) is 128.18 g/mol. To find the moles of naphthalene, we divide the mass by the molar mass:
moles of naphthalene = \frac{30.0 g }{128.18 g/mol }= 0.234 mol.
Next, we convert the mass of toluene to kilograms:
mass of toluene = 500.0 g = \frac{500.0 g }{ 1000} = 0.500 kg.
Finally, we calculate the molality:
molality (m) = \frac{moles of solute }{ mass of solvent in kg}
molality =\frac{ 0.234 mol }{ 0.500 kg} = 0.468 mol/kg.
Therefore, the molality of the solution containing 30.0 g of naphthalene dissolved in 500.0 g of toluene is 0.468 mol/kg.
learn more about molality Refer: https://brainly.com/question/29808886
#SPJ11
For the following redox reactions, identify the species being oxidized, the species being reduced, the oxidizing agent, and the reducing agent: 7) Ni + F2 --> NiF2 1
8) Fe(NO3)2 + Al --> Fe + + Al(NO3)3 19) Li + H20 --> LiOH + H2
7) In the reaction Ni + F2 --> NiF2, Ni is being oxidized (loses electrons) and F2 is being reduced (gains electrons). The reducing agent is Ni, as it provides electrons for the reduction, and the oxidizing agent is F2, as it accepts electrons during the oxidation.
8) In the reaction Fe(NO3)2 + Al --> Fe + Al(NO3)3, Al is being oxidized (loses electrons) and Fe2+ from Fe(NO3)2 is being reduced (gains electrons). The reducing agent is Al, and the oxidizing agent is Fe2+.
19) In the reaction Li + H2O --> LiOH + H2, Li is being oxidized (loses electrons) and H2O is being reduced (gains electrons). The reducing agent is Li, and the oxidizing agent is H2O.
In redox reactions, oxidation and reduction occur simultaneously. The species being oxidized loses electrons, while the species being reduced gains electrons. The oxidizing agent causes oxidation by accepting electrons, while the reducing agent causes reduction by donating electrons.
In reaction 7, Ni is being oxidized as it loses electrons and F2 is being reduced as it gains electrons. F2 is the oxidizing agent as it causes oxidation by accepting electrons, while Ni is the reducing agent as it causes reduction by donating electrons.
In reaction 8, Fe(NO3)2 is being reduced as it gains electrons and Al is being oxidized as it loses electrons. Al is the oxidizing agent as it causes oxidation by accepting electrons, while Fe(NO3)2 is the reducing agent as it causes reduction by donating electrons.
In reaction 19, Li is being oxidized as it loses electrons and H2O is being reduced as it gains electrons. H2O is the oxidizing agent as it causes oxidation by accepting electrons, while Li is the reducing agent as it causes reduction by donating electrons.
To know more about oxidation visit:
https://brainly.com/question/13182308
#SPJ11
1100.0 g of Fe contains how many moles?
Answer:
19.6 mole
Explanation:
because Fe molar mass is 56
in the reaction, Br2 + H2S + H2O --> H2SO4 + HBr, the element oxidized is:
In the given reaction, the element that is oxidized is sulfur (S)
In the given reaction, the element that undergoes oxidation can be determined by examining the changes in oxidation states.
The oxidation state of an element is a measure of the number of electrons it has gained or lost in a compound or reaction. An increase in oxidation state indicates oxidation, while a decrease indicates reduction.
Looking at the reaction:
Br2 + H2S + H2O --> H2SO4 + HBr
Before the reaction, bromine (Br2) has an oxidation state of 0, hydrogen sulfide (H2S) has an oxidation state of -2, and water (H2O) has an oxidation state of 0.
After the reaction, sulfur (in H2SO4) has an oxidation state of +6, indicating an increase from -2. This means that sulfur has been oxidized.
Know more about oxidized here:
https://brainly.com/question/13182308
#SPJ11
choose the molecule(s) that will only show two signals, with an integration ratio of 2:3, in their 1h nmr spectum.
One molecule that could show two signals with an integration ratio of 2:3 in its 1H NMR spectrum is propanal ([tex]CH_3CH_2CHO[/tex]).
This molecule has two distinct types of protons: the two methyl ([tex]CH_3[/tex]) groups and the aldehyde (CHO) proton. The methyl protons will appear as a triplet due to coupling to the neighboring protons, while the aldehyde proton will appear as a singlet. The integration ratio of the methyl protons to the aldehyde proton is 2:1, which is equivalent to 2:3 when simplified. Therefore, propanal is a good example of a molecule that could show two signals with an integration ratio of 2:3 in its 1H NMR spectrum.
To learn more about NMR click here https://brainly.com/question/20111886
#SPJ11
The amino acid arginine can be synthesized by ____ pathway that requires seven enzymes. Wild type bacteria should _____ production of these enzymes if arginine is present in the enviorment.
a. an anabolic; repress
b. an anabolic; induce
c. a catabolic; repress
d. a catabolic; induce
The amino acid arginine can be synthesized by an anabolic pathway that requires seven enzymes. Wild type bacteria should repress production of these enzymes if arginine is present in the environment. Your answer: a. an anabolic; repress
The amino acid arginine can be synthesized by a pathway that requires seven enzymes.Wild type bacteria should induce production of these enzymes if arginine is present in the environment. This is because the presence of arginine signals to the bacteria that it is available as a nutrient source, and the bacteria will need to produce the necessary enzymes to synthesize it. The pathway for arginine synthesis is an anabolic process, meaning it requires energy and building blocks to create larger molecules from smaller ones. Therefore, the bacteria need to increase enzyme production to facilitate this process. Repression would not make sense in this context, as it would inhibit the synthesis of a necessary nutrient.
To know more about anabolic pathway visit:
https://brainly.com/question/30627429
#SPJ11
which of the following compounds will be more soluble in acidic solution than in pure water? a) pbcl2 b) fes c) ca(clo4)2 d) cui e) none of the above.
Among the compounds listed, [tex]Ca(ClO_4)_2[/tex] will be more soluble in acidic solution than in pure water.
The solubility of a compound depends on its interaction with the solvent molecules. In the case of acidic solutions, the presence of excess hydrogen ions (H+) affects the solubility of certain compounds.
a) [tex]PbCl_2[/tex]: Lead(II) chloride ( [tex]PbCl_2[/tex]) is a sparingly soluble salt in pure water. In acidic solutions, the solubility of [tex]PbCl_2[/tex]is not significantly affected because there are no specific interactions between lead ions and hydrogen ions.
b) FeS: Iron(II) sulfide (FeS) is insoluble in both pure water and acidic solutions. Its solubility is not influenced by the presence of acid.
c) [tex]Ca(ClO_4)_2[/tex] : Calcium perchlorate [tex]Ca(ClO_4)_2[/tex] is more soluble in acidic solutions than in pure water. The perchlorate anions (ClO4-) in the compound can undergo acid-base reactions with the excess hydrogen ions in the acidic solution, increasing its solubility.
d) CuI: Copper(I) iodide (CuI) is insoluble in both pure water and acidic solutions. It does not exhibit significant solubility changes in the presence of acid.
Therefore, among the given options, [tex]Ca(ClO_4)_2[/tex] is the compound that will be more soluble in an acidic solution compared to pure water due to acid-base interactions between the perchlorate anions and hydrogen ions in the solution.
To learn more about solubility refer:
https://brainly.com/question/23946616
#SPJ11
Check all of the reasons that you included in your answer. Copper oxide is the only product, and it contains copper and oxygen. One of the reactants is copper, so the other reactant must be oxygen. The copper metal must have combined with something in the air.
Answer:
that something in the air is oxygen
Answer:
check all of them
Explanation:
k2cro4 na2so3 hcl→kcl na2so4 crcl3 h2o generally coefficients of 1 are omitted from balanced chemical equations. when entering your answer, include coefficients of 1 as required for grading purposes.
While coefficients of 1 are typically omitted, they can be included for clarity and to satisfy grading requirements.
In balanced chemical equations, coefficients of 1 are typically omitted for simplicity and readability. Here's the balanced chemical equation for the given reaction while including coefficients of 1:
[tex]1 K_2CrO_4 + 1 Na_2SO_3 + 2 HCl -- > 2 KCl + 1 Na_2SO_4 + 1 CrCl_3 + 1 H_2O[/tex]
The purpose of balancing chemical equations is to ensure that the number of atoms of each element is the same on both sides of the equation. By adjusting the coefficients, we can achieve this balance while following the law of conservation of mass. The coefficients represent the relative amounts of each substance involved in the reaction.
To learn more about mass click here https://brainly.com/question/11954533
#SPJ11
Which describes the graphed relationship between kinetic energy and an object's mass?
Indirect
Parabola
Exponential
Linear
The mass increases, the kinetic energy also increases in a linear fashion, making the graph a straight line.
The relationship between kinetic energy and an object's mass is linear. According to the laws of physics, the kinetic energy of an object is directly proportional to its mass. This means that as the mass of an object increases, its kinetic energy also increases proportionally. Conversely, if the mass decreases, the kinetic energy decreases proportionally.
Mathematically, the relationship between kinetic energy (KE) and mass (m) can be expressed as KE = 0.5 * m * v^2, where v represents the velocity of the object. It is evident from this equation that the mass appears linearly in the formula, without any exponents or other nonlinear terms.
Therefore, when graphed, the relationship between kinetic energy and an object's mass would be represented by a straight line passing through the origin (0,0) with a positive slope.
For more such questions on mass
https://brainly.com/question/24191825
#SPJ8
How many grams of copper will be plated out by a current of 2.3 A applied for 35 minutes to a 0.50 M solution of copper (II) sulfate? A)1.6 B) 3.2 C) 1.8×10-2 D) 3.6x10-2 E)0.019 Answer: A 7 20)
To calculate the mass of copper that will be plated out, we can use Faraday's law of electrolysis, which states that the mass of a substance deposited or liberated at an electrode is directly proportional to the quantity of electricity passed through the cell.
The formula to calculate the mass of a substance plated out is:
Mass = (Current × Time × Atomic Mass) / (Faraday's Constant × Number of Electrons)
Here we are plating out copper, which has an atomic mass of approximately 63.55 g/mol. The copper (II) sulfate solution contains copper ions with a charge of +2, meaning each copper ion (Cu2+) requires 2 electrons to be reduced to copper metal.
The Faraday's constant is approximately 96,485 C/mol, representing the charge of one mole of electrons.
Calculate the mass of copper plated out:
Mass = (2.3 A × 35 min × 60 s/min × 63.55 g/mol) / (96,485 C/mol × 2)
Mass = 0.0197 g
Therefore, the correct answer is E) 0.019 g.
Learn more about Faraday's law of electrolysis here ;
https://brainly.com/question/1640558
#SPJ11
Wrapping a hot potato in aluminum foil significantly reduces the rate at which it cools by: A. melting B. evaporation C. condensation D. conduction.
Wrapping a hot potato in aluminum foil significantly reduces the rate at which it cools primarily by reducing heat loss through conduction. The aluminum foil acts as a barrier that slows down the transfer of heat from the potato to its surroundings, keeping it warm for a longer period.
Wrapping a hot potato in aluminum foil significantly reduces the rate at which it cools by reducing the process of conduction. Conduction is the transfer of heat between two objects that are in contact with each other. When a hot potato is left in open air, it transfers heat to the surrounding air molecules through conduction, resulting in a rapid decrease in temperature. However, wrapping the potato in aluminum foil prevents direct contact with the air, which decreases the rate of conduction and keeps the potato hotter for a longer period. Therefore, the correct answer is D. conduction.
To know more about conduction visit:
https://brainly.com/question/31201773
#SPJ11
Methyl methacrylate has a mola mass of 100 g/mole. When a sample of methyl methacrylate weighing 3. 14 g was completely combusted ,the only products formed were 6. 91 g of CO2and 2. 26 of water. What is methyl methacrylate's molecular formula ?
The molecular formula of methyl methacrylate if its weighing 3.14 g was completely combusted and the only products formed were 6. 91 g of CO₂ and 2. 26 of water is C₅H₈O₂.
We have to determine the empirical formula of methyl methacrylate first and then multiply it by the integer n to determine the molecular formula. Empirical formula calculation:
CO₂ and H₂O are the combustion products of methyl methacrylate.
C₅H₈O₂ + (9n / 2)
O₂ → 5CO₂ + (n)H₂O
There are 5 C atoms and (8 + 2n), H atoms in the left and 5 C atoms, and n H atoms in the right.
5C = 5C, and 8 + 2n = nH.
n = 6
Molecular formula calculation is dividing the molecular weight by the empirical formula weight to determine the multiplication factor.
C₅HₙO₂ (empirical formula) has a weight of
(5 x 12.011) + (8 x 1.008) + (2 x 15.999) = 100.12 g/mol
The actual molecular weight of methyl methacrylate is 100 g/mol.
Therefore, the molecular formula is (C₅H₈O₂) x 1, which is C₅H₈O₂.
Learn more about molecular formula: https://brainly.com/question/29435366
#SPJ11
determine the empirical and molecular formula of a compound which has the molecular mass of 90grams/mole, which contains 80.0% carbon and 20% hydrogen
Answer :
Empirical formula : CH3
Molecular Formula : C6H18
Explanation :
C : H
80/ 12 : 20/ 1
6.67/ 6.67 : 20/ 6.67
1 : 3
Therefore : CH3
Molecular formula :
First calculate n
n = Relative molecular mass / Empirical formula mass
= 90/15
= 6
Therefore : ( CH3) subscript 6
= C6H18
HIO_3 behaves as acid in water HIO_3 (aq) IO_3^- (aq) + H^+ (aq), with K_c = 0.17 at 25 degree C. What is the H^+ concentration in a solution that is initially 0.50 M HIO_3? a. 0.34 M b. 0.29 M c. 0.22 M d. 0.28 M
The H^+ concentration in a solution initially containing 0.50 M HIO_3 can be calculated using the equilibrium constant (K_c) and the stoichiometry of the balanced equation. The H^+ concentration is approximately 0.22 M (option c).
The given equilibrium reaction is HIO_3 (aq) -> IO_3^- (aq) + H^+ (aq) with a K_c value of 0.17 at 25 degrees Celsius. This indicates that the equilibrium strongly favors the reactant side.
To determine the H^+ concentration, we can set up an ICE (initial, change, equilibrium) table. Initially, the concentration of H^+ is zero since there are no H^+ ions present before the reaction. The change in concentration is x for both H^+ and IO_3^-, and the equilibrium concentration of H^+ is x.
Using the equilibrium constant expression:
K_c = [IO_3^-][H^+]
Substituting the given K_c value of 0.17 and the equilibrium concentration of H^+ as x, we have:
0.17 = x^2
Solving for x, we find x ≈ 0.41 M.
Therefore, the H^+ concentration in the solution is approximately 0.22 M (option c).
learn more about equilibrium constant Refer: https://brainly.com/question/19671384
#SPJ11
complete question:
HIO_3 behaves as acid in water HIO_3 (aq) IO_3^- (aq) + H^+ (aq), with K_c = 0.17 at 25 degree C. What is the H^+ concentration in a solution that is initially 0.50 M HIO_3? a. 0.34 M b. 0.29 M c. 0.22 M d. 0.28 M e.0.17M
Silver Chloride has a larger Ksp than silver carbonate (Ksp = 1.6x10‐10 and 8.1x10‐12 respectively). Does this mean that AgCl also has a larger molar solubility than Ag2CO3? Explain
Silver Chloride has a larger Ksp than silver carbonate (Ksp = 1.6x10‐10 and 8.1x10‐12 respectively. it indicates that more AgCl can dissolve per liter compared to [tex]Ag_2CO_3[/tex]. Therefore, AgCl has a larger molar solubility than [tex]Ag_2CO_3[/tex].
To determine whether silver chloride (AgCl) has a larger molar solubility than silver carbonate, we need to compare their respective solubility product constants (Ksp). The Ksp value represents the equilibrium constant for the dissolution of a sparingly soluble salt in water.
For AgCl, the dissociation equation is:
[tex]\[\text{AgCl} \rightleftharpoons \text{Ag}^+ + \text{Cl}^-\][/tex]
The Ksp expression is:
[tex]\[Ksp_{\text{AgCl}} = [\text{Ag}^+] \cdot [\text{Cl}^-]\][/tex]
For Ag2CO3, the dissociation equation is:
[tex]\[\text{Ag2CO3} \rightleftharpoons 2\text{Ag}^+ + \text{CO}_3^{2-}\][/tex]
The Ksp expression is:
[tex]\[Ksp_{\text{Ag2CO3}} = [\text{Ag}^+]^2 \cdot [\text{CO}_3^{2-}]\][/tex]
Comparing the two Ksp expressions, we can see that AgCl has a larger Ksp because it does not involve a squared term like [tex]Ag_2CO_3[/tex]. This indicates that the molar solubility of AgCl is larger than that of [tex]Ag_2CO_3[/tex].
Molar solubility refers to the number of moles of a substance that can dissolve in a liter of solution. Since AgCl has a larger Ksp, it indicates that more AgCl can dissolve per liter compared to [tex]Ag_2CO_3[/tex]. Therefore, AgCl has a larger molar solubility than [tex]Ag_2CO_3[/tex].
Learn more about molar solubility here:
https://brainly.com/question/31778415
#SPJ11
what is the shape of [cr(nh3)3 cl3 ]-3group of answer choicesocahedraltetrahedralsquare plannertriangular
The shape of [Cr(NH3)3Cl3]-3 is octahedral.
This means that the complex ion has six ligands attached to the central chromium atom, arranged at the vertices of an octahedron. The three ammonia ligands are arranged in an equatorial plane, while the three chloride ligands are arranged in an axial plane perpendicular to the equatorial plane. The octahedral shape is a common geometry for six-coordinate transition metal complexes, and it allows for efficient bonding with a wide variety of ligands. The complex ion is also overall negatively charged, due to the presence of three chloride ions, which act as counterions to the positively charged central chromium atom. The shape of the complex ion [Cr(NH3)3Cl3]-3 is octahedral. In this complex, the central metal ion (Cr) is surrounded by six ligands - three ammonia (NH3) molecules and three chloride (Cl-) ions. These ligands are arranged at the vertices of an octahedron, with each ligand equidistant from the central ion, resulting in an octahedral geometry. This shape is common in coordination compounds, providing stability and symmetry for the complex ion.
To know more about octahedral visit:
https://brainly.com/question/17204989
#SPJ11
Frequently magnesium is coated with magnesium oxide. Write the reaction of magnesium oxide with hydrochloric acid.
When magnesium oxide reacts with hydrochloric acid (HCl), it forms magnesium chloride ([tex]MgCl_2[/tex]) and water ([tex]H_2O[/tex]).
The reaction between magnesium oxide (MgO) and hydrochloric acid (HCl) is an example of an acid-base reaction. In this reaction, the magnesium oxide acts as a base and reacts with the hydrochloric acid to form magnesium chloride and water. The chemical equation for this reaction is as follows:
[tex]\[\text{{MgO}} + 2\text{{HCl}} \rightarrow \text{{MgCl}}_2 + \text{{H}}_2\text{{O}}\][/tex]
In the reaction, the hydrochloric acid (HCl) donates a proton (H+) to the magnesium oxide (MgO), which acts as a base and accepts the proton. This results in the formation of magnesium chloride ([tex]MgCl_2[/tex]), which is a salt, and water ([tex]H_2O[/tex]).
The reaction between magnesium oxide and hydrochloric acid is an example of a neutralization reaction, where an acid and a base react to form a salt and water. Magnesium chloride is a white, crystalline solid, and water is formed as a byproduct of the reaction. This reaction is exothermic, meaning it releases heat.
To learn more about magnesium oxide refer:
https://brainly.com/question/24605172
#SPJ11
How can the increase in energy of particles (increased vibration) be used to explain changes of
state?
The increase in energy of particles increases the movement and kinetic energy of the particles changing their state of matter.
Particles or matter change their state either by absorbing or releasing energy usually in the form of heat or thermal energy. When a particle is given this thermal energy and absorbs it, the kinetic energy of these particles increases. Thereby increasing their movement across the medium.
This results in rapid movement and the force of attraction between the particles decrease. They spread out changing their state of matter. In the case of water, when ice is heated, the water molecules absorb heat and move around turning ice into water.
To learn more about the change of state:
https://brainly.com/question/18372554
Our goal is to obtain an approximate length of the stearic acid molecule Concentration of stearic acid solution Average number of drops in 1 ml. Volume of 1 drop of solution Diameter of water surface Area of water surface Number of drops of solution needed to 0.11 g/L 13.5 create a monolayer of stearic acid a) Using the concentration of the stearic acid solution calculate the grams of stearic acid per drop. b) Using the number of drops of solution delivered to the water surface to make the monolayer calculate how many grams of stearic acid were needed to make a monolayer c) Using the density of stearic acid (0.85 g/mL) and the mass of stearic acid calculate the volume of stearic acid in cm in the monolayer. (I mL-1 cm) d) Calculate the thickness (L) in cm of the monolayer using L = Volume/Area. e) Convert the thickness in cm to Angstroms.
a) To calculate the grams of stearic acid per drop, we need to use the concentration of the stearic acid solution. The concentration is given as 0.11 g/L. Since 1 mL is equivalent to the average number of drops in 1 mL, we can calculate the grams of stearic acid per drop as follows:
Grams of stearic acid per drop = (Concentration of stearic acid solution in g/L) / (Average number of drops in 1 mL)
b) To calculate the grams of stearic acid needed to make a monolayer, we can multiply the number of drops of solution delivered to the water surface (provided in the question) by the grams of stearic acid per drop calculated in part (a).
c) Using the density of stearic acid (0.85 g/mL) and the mass of stearic acid calculated in part (b), we can calculate the volume of stearic acid in cm³ in the monolayer. Since the density is given in g/mL, the volume can be determined using the formula:
Volume of stearic acid = Mass of stearic acid / Density of stearic acid
d) To calculate the thickness (L) of the monolayer, we can divide the volume of stearic acid in cm³ by the area of the water surface. The area of the water surface is not provided in the question, so it would need to be obtained from additional information.
e) To convert the thickness in cm to Angstroms, we can multiply the thickness in cm by a conversion factor. 1 cm is equivalent to 10,000 Angstroms, so the thickness in Angstroms can be calculated by multiplying the thickness in cm by 10,000.
a) The concentration of the stearic acid solution is provided as 0.11 g/L. To find the grams of stearic acid per drop, we divide this concentration by the average number of drops in 1 mL.
b) The number of drops of solution delivered to the water surface is given in the question. To calculate the grams of stearic acid needed to make a monolayer, we multiply this number by the grams of stearic acid per drop calculated in part (a).
c) The density of stearic acid is given as 0.85 g/mL. Using this density and the mass of stearic acid calculated in part (b), we can determine the volume of stearic acid in cm³ in the monolayer.
d) To calculate the thickness of the monolayer, we divide the volume of stearic acid in cm³ by the area of the water surface. The area of the water surface is not provided in the question, so additional information is needed to perform this calculation accurately.
e) To convert the thickness from cm to Angstroms, we multiply the thickness in cm by the conversion factor of 10,000 since 1 cm is equivalent to 10,000 Angstroms.
By following the steps outlined above, you can determine the grams of stearic acid per drop, the grams of stearic acid needed to make a monolayer, the volume of stearic acid in cm³ in the monolayer, the thickness of the monolayer in cm, and finally, the conversion of the thickness to Angstroms. However, please note that the calculations depend on additional information such as the area of the water surface, which is not provided in the given question.
To know more about stearic acid, visit :
https://brainly.com/question/16233112
#SPJ11
in each of the following cases, use the data given to determine whether the reaction favors the reactants or products:an exothermic reaction with a positive value for δssys.
An exothermic reaction with a positive value for ΔSsys generally favors the reactants.
In chemical reactions, the change in entropy (ΔS) is an important factor in determining the direction of the reaction. ΔSsys represents the change in entropy of the system, which is the reactants and products involved in the reaction. A positive value for ΔSsys indicates an increase in entropy, meaning that the products have a higher level of disorder or randomness compared to the reactants.
For an exothermic reaction, the heat is released to the surroundings, resulting in a decrease in the entropy of the surroundings (ΔSsurr). If ΔSsys is positive, it means that the increase in disorder within the system is greater than the decrease in disorder in the surroundings.
Since an exothermic reaction with a positive value for ΔSsys indicates an increase in disorder, it suggests that the reaction favors the reactants. This is because the reactants have a lower level of disorder compared to the products, and the reaction proceeds in the direction that increases the disorder or entropy of the system.
Learn more about exothermic reaction here:
https://brainly.com/question/28546817
#SPJ11