Answer:A
Explanation:The minimum level of education required to become an electrician is a high school diploma or equivalency degree, like the General Education Diploma (GED). This educational step is important on the journey to becoming an electrician because the high school curriculum covers the basic principles used on the job.
Which two technologies were combined to create product life cycle management (PLM) software?
CAD and a database
spreadsheets and graphics
a database and spreadsheets
CAD and spreadsheets
Answer:
CAD and a database
Explanation:
The correct answer is CAD and a database. When American Motors Corportation introduced the Jeep Cherokee, it implemented CAD to increase engineering productivity and combined that with a new communications system.
A flat plate is subjected to a load of 5KN as shown in figure. The plate material is grey cast iron FFG 200 and the factor of safety is 2.5. Determine the thickness of the plate
Answer:
57.14 N/mm2
Explanation:
i gave 15 min to finish this java program
Answer:
class TriangleNumbers
{
public static void main (String[] args)
{
for (int number = 1; number <= 10; ++number) {
int sum = 1;
System.out.print("1");
for (int summed = 2; summed <= number; ++summed) {
sum += summed;
System.out.print(" + " + Integer.toString(summed));
}
System.out.print(" = " + Integer.toString(sum) + '\n');
}
}
}
Explanation:
We need to run the code for each of the 10 lines. Each time we sum numbers from 1 to n. We start with 1, then add numbers from 2 to n (and print the operation). At the end, we always print the equals sign, the sum and a newline character.
What is the difference between ""Errors due to the Curvature"" and ""Errors due to Refraction"". Support your answer with sketches
Answer:
In " errors due to the curvature " the points appears to be lower than they are in reality while
In " errors due to Refraction " The points appears to be higher than they are in reality .
Explanation:
The difference between both errors
In " errors due to the curvature " the points appears to be lower than they are in reality while
In " errors due to Refraction " The points appears to be higher than they are in reality .
when the effects of both Errors are combined the points will appear lower and this is because the effect of "error due to the curvature" is greater
attached below are the sketches
What Modern-Day Railroad Runs From Chicago to Seattle?
Answer:
The empire builder
Explanation:
As part of a heat treatment process, cylindrical, 304 stainless steel rods of 100-mm diameter are cooled from an initial temperature of 500 C by suspending them in an oil bath at 30 C. If a convection coefficient of 500 W/m2 K is maintained by circulation of the oil, how long does it take for the centerline of a rod to reach a temperature of 50 C, at which point it is withdrawn from the bath
Answer:
Explanation:
Given that:
diameter = 100 mm
initial temperature = 500 ° C
Conventional coefficient = 500 W/m^2 K
length = 1 m
We obtain the following data from the tables A-1;
For the stainless steel of the rod [tex]\overline T = 548 \ K[/tex]
[tex]\rho = 7900 \ kg/m^3[/tex]
[tex]K = 19.0 \ W/mk \\ \\ C_p = 545 \ J/kg.K[/tex]
[tex]\alpha = 4.40 \times 10^{-6} \ m^2/s \\ \\ B_i = \dfrac{h(\rho/4)}{K} \\ \\ =0.657[/tex]
Here, we can't apply the lumped capacitance method, since Bi > 0.1
[tex]\theta_o = \dfrac{T_o-T_{\infty}}{T_i -T_\infty}} \\ \\ \theta_o = \dfrac{50-30}{500 -30}} \\ \\ \theta_o = 0.0426\\[/tex]
[tex]0.0426 = c_1 \ exp (- E^2_1 F_o_)\\ \\ \\ 0.0426 = 1.1382 \ exp (-10.9287)^2 \ f_o \\ \\ = f_o = \dfrac{In(0.0374)}{0.863} \\ \\ f_o = 3.81[/tex]
[tex]t_f = \dfrac{f_o r^2}{\alpha} \\ \\ t_f = \dfrac{3.81 \times (0.05)^2}{4.40 \times 10^{-6}} \\ \\ t_f= 2162.5 \\ \\ t_f = 36 mins[/tex]
However, on a single rod, the energy extracted is:
[tex]\theta = pcv (T_i - T_{\infty} )(1 - \dfrac{2 \theta}{c} J_1 (\zeta) ) \\ \\ = 7900 \\times 546 \times 0.007854 \times (500 -300) (1 - \dfrac{2 \times 0.0426}{1.3643}) \\ \\ \theta = 1.54 \times 10^7 \ J[/tex]
Hence, for centerline temperature at 50 °C;
The surface temperature is:
[tex]T(r_o,t) = T_{\infty} +(T_1 -T_{\infty}) \theta_o \ J_o(\zeta_1) \\ \\ = 30 + (500-30) \times 0.0426 \times 0.5386 \\ \\ \mathbf{T(r_o,t) = 41.69 ^0 \ C}[/tex]
What regulates the car engines temperature
Answer:
car’s thermostat is used to regulate the temperature of the engine to help the engine stay cool.
Explanation:
Answer:
Coolant
Explanation:
Assume that the flowrate. Q, of a gas from a smokestack is a function of the density of the ambient air,rhoarho a , the density of the gas,rhogrho g , within the stack, the acceleration of gravity, g, and the height and diameter of the stack, h and d, respectively. Use rhocrho c , d, and g as repeating variables to develop a set of pi terms that could be used to describe this problem.
Answer:
hello your question poorly written attached below is the well written question
answer : ∅[tex]( \frac{Pg}{Pa} , \frac{h}{d})[/tex][tex]( \frac{p_{g} }{p_{a} } , \frac{h}{d} )[/tex]
Explanation:
Develop a set of pi terms that could be used to describe the problem
attached below is the required solution
Which color is used to indicate that a wire will be energized when power is brought to the circuit
A. Yellow
B. Black
C. Blue
D. White
Answer:
I think the answer is B. Black
The standard procedure for dimensioning the location of a house on a site is to dimension ____ of the house from adjacent lot lines. A one side b two sides c two corners d one corner
Answer:
One corner ( D )
Explanation:
when dimensioning the location of a house on site the standard and the acceptable procedure is to ; Dimension One corner of the house
Adjacent lots is a term used to describe parcels of the site that meet each other along their boundary lines. and they also include parcels that may be separated by streets