Answer:
It will lose electrical potential energy.
Explanation:
A photon held at rest in a uniform electrical field will lose electrical potential energy when it is released this is because the electrical potential energy is the energy posses by the photon at rest or by virtue of the position is converted to kinetic energy which is energy posses by a body in motion.
Since the photon is released and set in motion , it now has kinetic energy and has lost the potential energy because it is set in motion.
A sound level of 96 dB is how many times as intense as one of 90 dB?
Answer:
A sound level of 96 dB is 4 times as intense as one of 90 dB
Explanation:
The formula of the intensity level of sound in decibels is given as follows:
Intensity Level = 10 log₁₀(I/I₀)
where,
I = Intensity of Sound
I₀ = Reference Intensity Level = 10⁻¹² W/m²
Therefore, for 96 dB sound level:
96 = 10 log₁₀(I₁/10⁻¹²)
log₁₀(I₁/10⁻¹²) = 96/10
I₁/10⁻¹² = 10^9.6
I₁ = (10⁻¹²)(4 x 10⁹)
I₁ = 0.004 W/m²
For 90 dB sound level:
90 = 10 log₁₀(I₂/10⁻¹²)
log₁₀(I₂/10⁻¹²) = 90/10
I₂/10⁻¹² = 10^9
I₂ = (10⁻¹²)(10⁹)
I₂ = 0.001 W/m²
Therefore,
I₁/I₂ = 0.004/0.001
I₁ = 4 I₂
Hence, the sound level of 96 dB is 4 times as intense as one of 90 dB.
What percent of our solar system's mass is in the sun?
Answer:
99.8
Explanation:
most massive the sun is at the center of the universe
Use Hooke's Law to determine the work done by the variable force in the spring problem. Nine joules of work is required to stretch a spring 0.5 meter from its natural length. Find the work required to stretch the spring an additional 0.40 meter.
Answer:
29.16 J
Explanation:
From Hook's law,
W = 1/2(ke²)..................... Equation 1
Where W = work done, k = Spring constant, e = extension.
Given: W = 9 J, e = 0.5 m.
Substitute into equation 1
9 = 1/2(k×0.5²)
Solve for k
k = 18/0.5²
k = 72 N/m.
The work done required to stretch the spring by additional 0.4 m is
W = 1/2(72)(0.4+0.5)²
W = 36(0.9²)
W = 29.16 J.
b. A locomotive of a train exerts a constant force of 280KN on a train while pulling
it at 50 km/h along a level track. What is:
[4 marks)
i. Workdone in quarter an hour and
[4 marks]
Answer:
Work-done in quarter an hour = 3.5 × 10⁶ J
Explanation:
Given:
Force (F) = 280 KN = 280,000 N
Velocity (V) = 50 km / h
Time (t) = 1 / 4 = 0.25 hour
Find:
Work-done in quarter an hour
Computation:
⇒ Displacement = Velocity (V) × Time
⇒ Displacement = 50 × 0.25
⇒ Displacement = 12.5 km
⇒ Work-done = Force (F) × Displacement
⇒ Work-done in quarter an hour = 280,000 × 12.5
⇒ Work-done in quarter an hour = 3,500,000
Work-done in quarter an hour = 3.5 × 10⁶ J
please help! i will be giving 50 points, this is for my psychology class.
Iris has been ahead of her classmates for as long as she has been in school. Lately, her classmates have started making fun of her for being a “teacher’s pet,” and they mock her whenever she raises her hand to answer a question.
Iris is most likely being negatively stereotyped as being __________.
A.
below average
B.
normal
C.
intellectually disabled
D.
gifted
Answer:
D
Explanation:
the other students are making fun of her most likely because they are jealous that she is successing in school. hope this helps :)
Answer:
D
Explanation:
You measure the power delivered by a battery to be 1.15 W when it is connected in series with two equal resistors. How much power will the same battery deliver if the resistors are now connected in parallel across it
Answer:
The power is [tex]P_p = 4.6 \ W[/tex]
Explanation:
From the question we are told that
The power delivered is [tex]P_{s} = 1.15 \ W[/tex]
Let it resistance be denoted as R
The resistors are connected in series so the equivalent resistance is
[tex]R_{eqv} = R+ R = 2 R[/tex]
Considering when it is connected in series
Generally power is mathematically represented as
[tex]P_s = V * I[/tex]
Here I is the current which is mathematically represented as
[tex]I = \frac{V}{2R}[/tex]
The power becomes
[tex]P_s = V * \frac{V}{2R}[/tex]
[tex]P_s = \frac{V^2}{2R}[/tex]
substituting value
[tex]1.15 = \frac{V^2}{2R}[/tex]
Considering when resistance is connected in parallel
The equivalent resistance becomes
[tex]R_{eqv} = \frac{R}{2}[/tex]
So The current becomes
[tex]I = \frac{V}{\frac{R}{2} } = \frac{2V}{R}[/tex]
And the power becomes
[tex]P_p = V * \frac{2V}{R} = \frac{2V^2}{R} = \frac{4 V^2}{2 R} = 4 * P_s[/tex]
substituting values
[tex]P_p = 4 * 1.15[/tex]
[tex]P_p = 4.6 \ W[/tex]
Photoelectric effect:
A. What is the maximum kinetic energy of electrons ejected from barium (W0=2.48eV) when illuminated by white light, lambda=410-750nm?
B. The work functions for sodium, cesium, copper, and iron are 2.3, 2.1, 4.7, and 4.5eV, respectively. Which of these metals will not emit electrons when visible light shines on it?
Answer:
A. K = 0.546 eV
B. cooper and iron will not emit electrons
Explanation:
A. This is a problem about photoelectric effect. Then you have the following equation:
[tex]K=h\nu-\Phi=h\frac{c}{\lambda} -\Phi[/tex] (1)
K: kinetic energy of the ejected electron
Ф: Work function of the metal = 2.48eV
h: Planck constant = 4.136*10^{-15} eV.s
λ: wavelength of light = 410nm - 750nm
c: speed of light = 3*10^8 m/s
As you can see in the equation (1), higher the wavelength, lower the kinetic energy. Then, the maximum kinetic energy is obtained with the lower wavelength (410nm). Thus, you replace the values of all variables :
[tex]K=(4.136*10^{-15}eV)\frac{3*10^8m/s}{410*10^{-9}m}-2.48eV\\\\K=0.546eV[/tex]
B. First you calculate the energy of the photon with wavelengths of 410nm and 750nm
[tex]E_1=(4.136*10^{-15}eV)\frac{3*10^{8}m/s}{410*10^{-9}m}=3.02eV\\\\E_2=(4.13610^{-15}eV)\frac{3*10^{8}m/s}{750*10^{-9}m}=1.6544eV[/tex]
You compare the energies E1 and E2 with the work functions of the metals and you can conclude:
sodium = 2.3eV < E1
cesium = 2.1 eV < E1
cooper = 4.7eV > E1 (this metal will not emit electrons)
iron = 4.5eV > E1 (this metal will not emit electrons)
An experiment invilves three charges objects: A, B, and C. Object A repels object B and attracts onject C. object C ir repelled by ebonite charged with fur. What is the charge on the object?
Answer:
A and B is positive charge
C_negative
Explanation:
because when an ebonite is rubbed with fur produce negative charge due to law of electrostatic like charge repel and unlike attract
Which is the best description of the scientific theory
Explanation:
a scientific theory is a well substantiated explanation of some aspect of the nature world, based on a body of facts that have been repeatedly confirmed through observation and experiment. search fact-supported theories are not "guesses" but reliable account of the real world .
What is the minimum frequency with which a 200-turn, flat coil of cross sectional area 300 cm2 can be rotated in a uniform 30-mT magnetic field if the maximum value of the induced emf is to equal 8.0 V
Answer:
The minimum frequency of the coil is 7.1 Hz
Explanation:
Given;
number of turns, N = 200 turns
cross sectional area, A = 300 cm² = 300 x 10⁻⁴ m²
magnitude of magnetic field strength, B = 30 x 10⁻³ T
maximum value of the induced emf, E = 8 V
Maximum induced emf is given as;
E = NBAω
where
ω is angular velocity (ω = 2πf)
E = NBA2πf
where;
f is the minimum frequency, measured in hertz (Hz)
f = E / (NBA2π)
f = 8 / (200 x 30 x 10⁻³ x 300 x 10⁻⁴ x 2 x 3.142)
f = 7.073 Hz
f = 7.1 Hz
Therefore, the minimum frequency of the coil is 7.1 Hz
The minimum frequency of the coil in the case when it should be rotated in a uniform 30-mT magnetic field is 7.1 Hz.
Calculation of the minimum frequency:Since
number of turns, N = 200 turns
cross-sectional area, A = 300 cm² = 300 x 10⁻⁴ m²
the magnitude of magnetic field strength, B = 30 x 10⁻³ T
the maximum value of the induced emf, E = 8 V
Now
Maximum induced emf should be
E = NBAω
here,
ω is angular velocity (ω = 2πf)
Now
E = NBA2πf
here,
f is the minimum frequency
So,
f = E / (NBA2π)
f = 8 / (200 x 30 x 10⁻³ x 300 x 10⁻⁴ x 2 x 3.142)
f = 7.073 Hz
f = 7.1 Hz
Therefore, the minimum frequency of the coil is 7.1 Hz.
Learn more about frequency here: https://brainly.com/question/24470698
We say that the displacement of a particle is a vector quantity. Our best justification for this assertion is: A. a displacement is obviously not a scalar. B. displacement can be specified by a magnitude and a direction. C. operating with displacements according to the rules for manipulating vectors leads to results in agreement with experiments. D. displacement can be specified by three numbers. E. displacement is associated by motion.
Answer:
Option B - displacement can be specified by a magnitude and a direction.
Explanation:
A Vector quantity is defined as a physical quantity characterized by the presence of both magnitude as well as direction. Examples include displacement, force, torque, momentum, acceleration, velocity e.t.c
Whereas a scalar quantity is defined as a physical quantity which is specified with the magnitude or size alone. Examples include length, speed, work, mass, density, etc.
Displacement is the difference between the initial position and the final position of a body. Displacement is a vector quantity and not a scalar quantity because it can be described by using both magnitude as well as direction.
Looking at the options, the only one that truly justifies this definition is option B.
Lebron James and Stephen Curry are playing an intense game of minigolf. The final(18th) hole is 8.2 m away from the tee box (starting location) at an angle of 20◦ east of north. Lebron’s first shot lands 8.6 m away at an angle of 35.2◦ east of north and Steph’s first shot lands 6.1 m away at an angle of 20◦ east of north. Assume that the minigolf course is flat.
(A) Which ball lands closer to the hole?
(B) Each player sunk the ball on the second shot. At what angle did each player hit their ball to reach the hole?
Answer:
A. we will see that the notion [tex]\mathbf{|r ^ \to - r_2 ^\to| = 2.10006 \ m}[/tex] which denotes Stephen Curry illustrates that Stephen Curry minigolf ball shot is closer
B. Lebron James hits at an angle of 17.48° North -East.
The direction of Stephen is = 20° due to East of North
Explanation:
Let [tex]r ^ {\to[/tex] represent the position vector of the hole;
Also; using the origin as starting point. Let the east direction be along the positive x axis and the North direction be + y axis
Thus:
[tex]r ^ {\to[/tex] = [tex]8.2 \ sin 20^0 \hat i + 8.2 \ cos 20 \hat j[/tex]
[tex]r ^ {\to[/tex] = [tex](2.8046 \hat i + 7.7055 \hat j ) m[/tex]
Let [tex]r_1 ^ \to[/tex] be the position vector for Lebron James's first shot
So;
[tex]r_1 ^ \to[/tex] = [tex](8.6 \ sin \ 35.2 )^0 \hat i + 8.6 \ cos \ ( 35.2)^0 \hat j[/tex]
[tex]r^ \to = (4.9573 \hat i + 7.02745 \hat j) m[/tex]
Let [tex]r_2 ^ \to[/tex] be the position vector for Stephen Curry's shot
[tex]r_2 ^ \to[/tex] [tex]=6.1 \ sin 20^0 \hat i + 6.1 \ cos \ 20 \hat j[/tex]
[tex]r_2 ^ \to[/tex] = [tex](2.0863 \hat i + 5.7321 \hat j )m[/tex]
However;
[tex]r ^ \to - r_1 ^\to = (-2.1527 \hat i + 0.67805 \hat j) m[/tex]
[tex]\mathbf{|r ^ \to - r_1 ^\to| =2.25696 \ m }[/tex]
Also;
[tex]r ^ \to - r_2 ^\to = (0.71013 \hat i - 1.9734 \hat j) m[/tex]
[tex]\mathbf{|r ^ \to - r_2 ^\to| = 2.10006 \ m}[/tex]
Thus; from above ; we will see that the notion [tex]\mathbf{|r ^ \to - r_2 ^\to| = 2.10006 \ m}[/tex] which denotes Stephen Curry illustrates that Stephen Curry minigolf ball shot is closer
B .
For Lebron James ;
The angle can be determine using the trigonometric function:
[tex]tan \theta = ( \dfrac{0.67805}{-2.1527}) \\ \\ tan \theta = -0.131498 \\ \\ \theta = tan ^{-1} ( -0.31498) \\ \\ \mathbf{\theta = -17.48^0}[/tex]
Thus Lebron James hits at an angle of 17.48° North -East.
For Stephen Curry;
[tex]tan \theta = ( \dfrac{-1.9734}{0.7183}) \\ \\ tan \theta = -2.74732 \\ \\ \theta = tan ^{-1} ( -2.74732) \\ \\ \mathbf{\theta = -70.0^0}[/tex]
The direction of Stephen is = 90° - 70° = 20° due to East of North
Identify the five categories of stressors.
Answer:
The five kinds of stressors are:
Acute time-limited
Brief naturalistic
Stressful events sequences
Chronic
Distant
Explanation:
yeah
A politician holds a press conference that is televised live. The sound picked up by the microphone of a TV news network is broadcast via electromagnetic waves and heard by a television viewer. This viewer is seated 2.7 m from his television set. A reporter at the press conference is located 5.5 m from the politician, and the sound of the words travels directly from the celebrity's mouth, through the air, and into the reporter's ears. The reporter hears the words exactly at the same instant that the television viewer hears them. Using a value of 343 m/s for the speed of sound, determine the maximum distance between the television set and the politician. Ignore the small distance between the politician and the microphone. In addition, assume that the only delay between what the microphone picks up and the sound being emitted by the television set is that due to the travel time of the electromagnetic waves used by the network.
Answer:
Explanation:
Time taken by sound waves to cover distance between politician and reporter = time taken by em waves to travel distance between politician and the television viewer.
5.5 / 343 = d / 3 x 10⁸ + 2.7 / 343
d is distance between politician and television set + time taken by sound to travel distance between television and its viewer.
.0160349 = d / 3 x 10⁸ + .0078717
d / 3 x 10⁸ = .0081632
d = 2448960 m
= 2448.96 km
= 2449 km .
In this problem you will consider the balance of thermal energy radiated and absorbed by a person.Assume that the person is wearing only a skimpy bathing suit of negligible area. As a rough approximation, the area of a human body may be considered to be that of the sides of a cylinder of length L=2.0m and circumference C=0.8m.For the Stefan-Boltzmann constant use σ=5.67×10−8W/m2/K4.Part aIf the surface temperature of the skin is taken to be Tbody=30∘C, how much thermal power Prb does the body described in the introduction radiate?Take the emissivity to be e=0.6.Express the power radiated into the room by the body numerically, rounded to the nearest 10 W.part bFind Pnet, the net power radiated by the person when in a room with temperature Troom=20∘C
Answer:
The thermal power emitted by the body is [tex]P_t = 286.8 \ Wm^{-2}[/tex]
The net power radiated is [tex]P_{net} = 460 \ W[/tex]
Explanation:
From the question we are told that
The length of the assumed hum[tex]T_{room} = 20 ^oC[/tex]an body is L = 2.0 m
The circumference of the assumed human body is [tex]C = 0.8 \ m[/tex]
The Stefan-Boltzmann constant is [tex]\sigma = 5.67 * 10^{-8 } \ W\cdot m^{-2} \cdot K^{-4}.[/tex]
The temperature of skin [tex]T_{body} = 30^oC[/tex]
The temperature of the room is
The emissivity is e=0.6
The thermal power radiated by the body is mathematically represented as
[tex]P_t = e * \sigma * T_{body}^4[/tex]
substituting value
[tex]P_t = 0.6 * 5.67*10^{-8} * (303)^4[/tex]
[tex]P_t = 286.8 \ Wm^{-2}[/tex]
The net power radiated by the body is mathematically evaluated as
[tex]P_{net} = P_t * A[/tex]
Where A is the surface area of the body which is mathematically evaluated as
[tex]A = C* L[/tex]
substituting values
[tex]A = 0.8 * 2[/tex]
[tex]A = 1.6 m^2[/tex]
=> [tex]P_{net} = 286.8 * 1.6[/tex]
=> [tex]P_{net} = 460 \ W[/tex]
In which situation is chemical energy being converted to another form of energy?
Answer:
A burning candle. (chemical energy into energy of heat and light, i.e. thermal and wave)
Explanation:
Three sheets of plastic have unknown indices of refraction. Sheet 1 is placed on top of sheet 2, and a laser beam is directed onto the sheets from above so that it strikes the interface at an angle of 26.50 with the normal. The refracted beam in sheet 2 makes an angle of 31.70 with the normal. The experiment is repeated with sheet 3 on top of sheet 2, and with the same angle of incidence, the refracted beam makes an angle of 36.70 with the normal. If the experiment is repeated again with sheet 1 on top of sheet 3, determine the expected angle of refraction in sheet 3? Assume the same angle of incidence.
Answer:
The angle of refraction of sheet 3 when sheet 1 is on top of it is [tex]\theta_{r_s } = 23.1 ^o[/tex]
Explanation:
From the question we are told that
The angle of incidence is [tex]\theta _i = 26.50 ^o[/tex]
The angle of refraction angle for sheet 1 is [tex]\theta _{r_1}} = 31.70 ^o[/tex]
The angle of refraction for sheet 3 is [tex]\theta _{r_3}} = 36.70 ^o[/tex]
According to Snell's law
[tex]\frac{n_2}{n_1} = \frac{sin (\theta_1)}{sin (\theta_{r_1})}[/tex]
Where [tex]n_1 \ and \ n_2[/tex] are refractive index of sheet 1 and sheet 2
=> [tex]n_2 = n_1 \frac{sin(\theta_i)}{sin (\theta _{r_1})}[/tex]
Also when sheet 3 in on top of sheet 2
[tex]\frac{n_2}{n_3} = \frac{sin \theta_i}{sin \theta_{r_3}}[/tex]
substituting for [tex]n_2[/tex]
[tex]n_1 \frac{sin(\theta_i)}{sin (\theta _{r_1})} = n_3 \frac{sin \theta_i}{sin \theta_{r_3}}[/tex]
[tex]n_1 \frac{sin(\theta_i)}{sin (\theta _{r_1})} = n_3 \frac{sin \theta_i}{sin \theta_{r_3}}[/tex]
=> [tex]n_3 = n_1 * \frac{sin(\theta_{r_3})}{sin(\theta_{r_1})}[/tex]
when sheet 1 in on top of sheet 3
[tex]\frac{n_3}{n_1} = \frac{sin(\theta_i)}{\theta_{r_s}}[/tex]
where [tex]r_s[/tex] is the angle of refraction when sheet 1 is on top of sheet 3
substituting for [tex]n_3[/tex]
[tex]\frac{ n_1 * \frac{sin(\theta_{r_3})}{sin(\theta_{r_1})}}{n_1} = \frac{sin(\theta_i)}{\theta_{r_s}}[/tex]
=> [tex]sin (\theta _{r_s}) = n_1 * sin (\theta_i) * \frac{sin (\theta_{r_1})}{ n_1 * sin(\theta_{r_3})}[/tex]
substituting values
[tex]sin (\theta _{r_s}) = n_1 * sin (26.50) * \frac{sin (31.70)}{ n_1 * sin(36.70)}[/tex]
=> [tex]\theta_{r_s } = sin^{-1} (0.3923)[/tex]
=> [tex]\theta_{r_s } = 23.1 ^o[/tex]
You're driving a vehicle of mass 850 kg and you need to make a turn on a flat road. The radius of curvature of the turn is 80 m. The maximum horizontal component of the force that the road can exert on the tires is only 0.22 times the vertical component of the force of the road on the tires (in this case the vertical component of the force of the road on the tires is , the weight of the car, where as usual 9.8 N/kg, the magnitude of the gravitational field near the surface of the Earth). The factor 0.22 is called the "coefficient of friction" (usually written "", Greek "mu") and is large for surfaces with high friction, small for surfaces with low friction.(a) What is the fastest speed you can drive and still make it around the turn? Invent symbols for the various quantities and solve algebraically before plugging in numbers.
maximum speed = ____ m/s
(b) Which of the following statements are true about this situation?
The net force is nonzero and points away from the center of the kissing circle.The momentum points toward the center of the kissing circle.The net force is nonzero and points toward the center of the kissing circle.The rate of change of the momentum is nonzero and points toward the center of the kissing circle.The centrifugal force balances the force of the road, so the net force is zero.The rate of change of the momentum is nonzero and points away from the center of the kissing circle.
(c) Look at your algebraic analysis and answer the following question. Suppose your vehicle had a mass 3 times as big (5250 kg). Now what is the fastest speed you can drive and still make it around the turn?
maximum speed = ____ m/s
(d) Look at your algebraic analysis and answer the following question. Suppose you have the original 1750 kg vehicle but the turn has a radius twice as large (166 m). What is the fastest speed you can drive and still make it around the turn?
maximum speed = ____m/s
Answer:
(a) v = 13.13 m/s
(b) The centrifugal force balances the force of the road, so net force is zero.
(c) v = 13.13 m/s
(d) v = 18.92 m/s
Explanation:
(a)
To make it around the turn without skidding the frictional force on cat must balance the centrifugal force. Therefore:
Frictional Force = Centrifugal Force
μR = mv²/r
where,
R = Normal Reaction = Weight of Car = mg
Therefore,
μmg = mv²/r
μg = v²/r
v = √μgr
where,
v = maximum possible velocity of car = ?
μ = coefficient of friction = 0.22
g = 9.8 m/s²
r = radius of curvature = 80 m
Therefore,
v = √[(0.22)(9.8 m/s²)(80 m)
v = 13.13 m/s
(b)
In order for the car to move without skidding around the turn, all the forces in horizontal direction must be equal. Hence, the centrifugal force and the frictional force (force of the road) must balance each other. So the true statement is:
The centrifugal force balances the force of the road, so net force is zero.
(c)
v = √μgr
Since the formula for speed is independent of mass. Therefore, the speed will remain same.
v = 13.13 m/s
(d)
v = √μgr
v = √[(0.22)(9.8 m/s²)(166 m)
v = 18.92 m/s
A gas in a closed container is heated with 12J of energy, causing the lid of the container to rise 3m with 5N of force. What is the total change in energy?
Answer:
27J
Explanation:
From conservation of Thermal energy, the total internal energy is the total sum of energy supplied or taken from the system plus work done for or on the system.
Now the change in internal energy would be the sum of the received energy substended in the gas plus the work done by the system which is workdone that it will sustend in pushing the lid. This is expressed mathematically as;
U = Q + (F×d);
U- change in internal energy
Q is the energy received by the system and is positive when energy is received by the system.
Fxd is the workdone and is positive since the gas pushes up the lid- the system does work.
U=12+(3×5)= 27J
wha is amplitde in sound
Answer:
The number of molecules displaced in a vibration makes the amplitude of a sound.
A glass sphere carrying a uniformly distributed charge of +Q is surrounded by an initially neutralspherical plastic shell. (Assume the charge +Q is uniformly distributed across thesurface of the glass sphere.)
Required:
a. Qualitatively, indicate the polarization of the plastic.
1. The plastic will polarize so as to have positive charge +Qon its inner surface and negativecharge −Q on its outer surface.
2. Dipoles in the plastic will polarize and orient themselves perpendicular to the radial electricfield due to the charge +Q.
3. Dipoles in the plastic will polarize and orient themselves radially, with their negativeends pointing toward the center.
4. Dipoles in the plastic will polarize and orient themselves radially, with their positiveendspointing toward the center.
b. Qualitatively, indicate the polarization of the inner glass sphere. Explain briefly.A net charge −Q from the dipoles will be uniformly distributed through the volume of the sphere.
1. There will be no polarization inside the glass sphere since the net electric field there iszero.
2. Dipoles in the glass will polarize and orient themselves perpendicular to the radial electricfield due to the charge +Q.
3. Dipoles in the glass will polarize and orient themselves radially, with their positive endspointing toward the center.
c. Is the electric field at location Poutside the plastic shell larger, smaller, or the same as itwould be if the plastic weren't there? Explain briefly.
1. Larger, because a net positive charge is created from the polarization of the shell.
2. Larger, because the positive charges displaced during polarization are closer to P than thenegative charges.
3. Smaller, because the negative charges displaced during polarization are closer to Pthanthe positive charges.
4. Smaller, because the plastic shell shields location Pfrom the charge +Q, such that the netfield at Pis zero.
5. The same, because no net charge is created from the polarization of the field.
Answer:
(A) 3. Dipoles in the plastic will polarize and orient themselves radially, with their negativeends pointing toward the center
(B) 2. There will be no polarization inside the glass sphere since the net electric field there is zero.
Explanation: charges are only distributed on the surface of the charged hollow conductor. The core must have zero charge.
(C) 2. Larger, because the positive charges displaced during polarization are closer to P than thenegative charges.
describe Piaget's four stages of cognitive development. Include the major hallmarks of each stage.
Answer:
Explanation:
Sensorimotor Infants "think" by acting on the world with their eyes, ears, hands, and mouth.
Preoperational. Development of language and make-believe play takes place.
Concrete Operational children think in a logical, organized fashion only when dealing with concrete information they can perceive directly.
Formal Operational. Adolescences can also evaluate the logic of verbal statements without referring to real-world circumstances.
Sensorimotor, preoperational, concrete operational, and formal operational are Piaget's four phases of cognitive development.
What is cognitive development?The way youngsters think, investigate, and figure things out is referred to as cognitive development.
Piaget defined four stages of cognitive development:
1. Sensorimotor. From birth through the age of 18-24 months.
2. Preoperational.From infancy (18-24 months) until toddlerhood (age 7)
3. Operational concrete. 7 to 11 years old
4. Formal operational. From adolescence to adulthood
Hence, sensorimotor, preoperational, concrete operational, and formal operational are Piaget's four phases of cognitive development.
To learn more about the cognitive development refer to:
https://brainly.com/question/14282522
#SPJ2
A 1KW electric heater is switched on for ten minutes
How much heat does it produce?
Explanation:
P=W/T ==> 1000w = Q/600 ==> Q=600000j
If a 1 - kilowatt electric heater is switched on for ten minutes then the heat produced by the electric heater would be 600 - kilo Joules .
What is thermal energy ?It can be defined as the form of the energy in which heat is transferred from one body to another body due to their molecular movements, thermal energy is also known as heat energy .
As given in the problem , we have to find out the heat produced by the 1 - kilo watts electric heater if it is switched on for ten minutes ,
The heat produced by the electric heater = Power × time
= 1000 × 600 Joules
= 600 kilo - Joules
Thus , the heat produced by the electric heater would be 600 - kilo Joules .
To learn more about thermal energy here , refer to the link ;
brainly.com/question/3022807
#SPJ2
Suppose a stone is thrown vertically upward from the edge of a cliff on Mars (where the acceleration due to gravity is only about 12 ft/s2 with an initial velocity of 64 ft/s from a height of 192 ft above the ground. The height s of the stone above the ground after t seconds is given by
s=−6t2+64t+192
a. Determine the velocity v of the stone after t seconds. b. When does the stone reach its highest point? c. What is the height of the stone at the highest point? d. When does the stone strike the ground? e. With what velocity does the stone strike the ground?
Answer:
a) v = -12t + 64
b) t = 5.33s
c) s = 362.66ft
d) t = 13.10s
e) v = 93.2ft/s
Explanation:
You have the following equation for the height of a stone thrown in Mars:
[tex]s(t)=-6t^2+64t+192[/tex] (1)
a) The velocity of the stone after t seconds is obtained with the derivative of s in time:
[tex]v=\frac{ds}{st}=-12t+64[/tex] (2)
The equation for the speed of the stone is v = -12t + 64
b) The highest point is obtained when the speed of the stone is zero. Then, from the equation (2) equal to zero, you can obtain the time when the stone is at its maximum height:
[tex]-12t+64=0\\\\t=5.33s[/tex]
The time in which the stone is at the maximum height is 5.33s
c) For this time the stone is at the maximum height. Then, you replace t in the equation (1):
[tex]s(1)=-6(5.33)^2+64(5.33)+192=362.66ft[/tex]
the maximum height is 362.66 ft
d) To find the time when the stone arrive to the ground you equal the equation (1) to zero and you solve for t:
[tex]0=-6t^2+64t+192[/tex]
you use the quadratic formula:
[tex]t_{1,2}=\frac{-64\pm\sqrt{64^2-4(-6)(192)}}{2(-6)}\\\\t_{1,2}=\frac{-64\pm 93.29}{-12}\\\\t_1=13.10s\\\\t_2=-2.44s[/tex]
You use the result with positive values because is the onlyone with physical meaning.
The time for the stone hits the ground is 13.10 s
e) You replace 13.10s in the equation (2) to obtain the velocity of the stone when it strike the ground:
[tex]v=-12t+64=-12(13.10)+64=-93.2\frac{ft}{s}[/tex]
The minus sign is because the stone's direction is downward.
The speed of the stone just when it strikes the ground is 93.2ft/s
A whistle of frequency 516 Hz moves in a circle of radius 64.3 cm at an angular speed of 17.9 rad/s. What are (a) the lowest and (b) the highest frequencies heard by a listener a long distance away, at rest with respect to the center of the circle
Answer:
(a) 498.6 Hz
(b) 534.6 Hz
Explanation: Please see the attachments below
A 3 kg mass object is pushed 0.6 m into a spring with spring constant 210 N/m on a frictionless horizontal surface. Upon release, the object moves across the surface until it encounters a rough incline. The object moves UP the incline and stops a height of 1.5 m above the horizontal surface.
(a) How much work must be done to compress the spring initially?
(b) Compute the speed of the mass at the base of the incline.
(c) How much work was done by friction on the incline?
Answer with Explanation:
We are given that
Mass of spring,m=3 kg
Distance moved by object,d=0.6 m
Spring constant,k=210N/m
Height,h=1.5 m
a.Work done to compress the spring initially=[tex]\frac{1}{2}kx^2=\frac{1}{2}(210)(0.6)^2=37.8J[/tex]
b.
By conservation law of energy
Initial energy of spring=Kinetic energy of object
[tex]37.8=\frac{1}{2}(3)v^2[/tex]
[tex]v^2=\frac{37.8\times 2}{3}[/tex]
[tex]v=\sqrt{\frac{37.8\times 2}{3}}[/tex]
v=5.02 m/s
c.Work done by friction on the incline,[tex]w_{friction}=P.E-spring \;energy[/tex]
[tex]W_{friction}=3\times 9.8\times 1.5-37.8=6.3 J[/tex]
A heavy copper ball of mass 2 kg is dropped from a fiftieth-floor apartment window. Another one with mass 1 kg is dropped immediately after 1 second. Air resistance is negligible. The difference between the speeds of the two balls:__________.
a. increases over time at first, but then stays constant.
b. decreases over time.
c. remains constant over time.
d. increases over time.
Answer:
C
Explanation:
Because everything on Earth falls at the same speed, the masses of the balls do not matter. Since the acceleration due to gravity is constant, their speeds will both be increasing at the same rate, and therefore the difference in speeds would remain constant until they hit the ground. Hope this helps!
What type of device forms images by changing the speed at which light travels?
Answer:
A lens
Explanation:
A lens forms images when light passes Through it bending the rays of in the process.A phenomena called refraction and the speed of light changes in the process because it enters a medium since it's wavelength is reduced.
The type of device that forms images by changing the speed at which light travels is the lens.
What is refraction through the lens?
A lens bends a light beam at an aimed perspective and converges or diffuses bundles of rays by taking benefit of refraction taking vicinity while the mild travels from air into glass or plastic. For that purpose, the aspect geometry of a lens has a spherical parent, which can be kind of divided into sorts.
A lens bends a mild beam at an aimed perspective and converges or diffuses bundles of rays through taking gain of refraction taking area whilst the mild travels from air into glass or plastic. For that motive, the facet geometry of a lens has a round parent, which may be kind of divided into sorts.
Learn more about the speed of light here:-https://brainly.com/question/104425
#SPJ2
A particle moving along the x-axis has a position given by m, where t is measured in s. What is the magnitude of the acceleration of the particle at the instant when its velocity is zero
Question:
A particle moving along the x-axis has a position given by x=(24t - 2.0t³)m, where t is measured in s. What is the magnitude of the acceleration of the particle at the instant when its velocity is zero
Answer:
24 m/s
Explanation:
Given:
x=(24t - 2.0t³)m
First find velocity function v(t):
v(t) = ẋ(t) = 24 - 2*3t²
v(t) = ẋ(t) = 24 - 6t²
Find the acceleration function a(t):
a(t) = Ẍ(t) = V(t) = -6*2t
a(t) = Ẍ(t) = V(t) = -12t
At acceleration = 0, take time as T in velocity function.
0 =v(T) = 24 - 6T²
Solve for T
[tex] T = \sqrt{\frac{-24}{6}} = \sqrt{-4} = -2 [/tex]
Substitute -2 for t in acceleration function:
a(t) = a(T) = a(-2) = -12(-2) = 24 m/s
Acceleration = 24m/s
A tuning fork is held over a resonance tube, and resonance occurs when the surface of the water is 12 cm below the top of the tube. Resonance occurs again when the water is 34 cm below the top of the tube. If the air temperature is 23 degrees Celsius, find the frequency of the tuning fork.
Answer:
786 Hz
Explanation:
Recall, the speed of sound is
v = 332 + 0.6t
Where t = 23°
v = 332 + 0.6(23)
v = 332 + 13.8
v = 345.8 m
Also, it is known that distance between two consecutive resonance length is half of the wavelength.
L2 - L1 = λ/2
34 - 12 = λ/2
λ/2 = 22
λ = 44 cm
Finally, remember that also
Frequency = speed/ wavelength
Frequency = 345.8/0.4
Frequency = 786 Hz
Therefore, the frequency of the tuning fork is 786 Hz