Answer:
The nervous and endocrine systems exert the ultimate control over homeostasis because they coordinate the functions of the body's systems.
Explanation:
Neha and Suhani are playing with two identical pendulums. They leave the bob from a certain position and wait for it to return to the same point. The one who waits for a shorter time wins. Neha leaves her pendulum from point L and Suhani leaves her pendulum from point P (see figure). What happens?
a. Neha wins as her bob comes back faster.
b. Suhani wins as her bob comes back faster.
c. No one wins as the bobs come back at the same time.
d. We cannot say any of the above for sure.
The one who waits for a shorter time wins. Neha leaves her pendulum from point L and Suhani leaves her pendulum from point P.Neha wins as her bob comes back faster. Therefore, option A is correct.
What is pendulum ?A weight suspended from a pivot such that it can freely swing is called a pendulum. Gravity's restoring force will cause a pendulum to accelerate back toward its equilibrium position if it is sideways moved from its resting, equilibrium position.
An object that is suspended from a fixed location by a string or rod and can move freely due to gravity and momentum. frequently used to control electronics like clocks. Simple pendulum: A back-and-forth swinging pendulum. A circularly swinging pendulum is referred to as a spherical pendulum.
The force of gravity acting on the swing causes it to move freely back and forth after being raised and released. The swing keeps returning.
Thus, option A is correct.
To learn more about pendulum, follow the link;
https://brainly.com/question/14759840
#SPJ2
Help please.
How long is between each phase of the moon?
Answer:
The Moon actually takes 27.3 days to complete a single orbit around the earth. The Moon takes 29.5 days to complete one phase cycle.
Hope it helps!
Explain how skeletal muscles work in pairs.
plzzzz answer asap !!
Answer:
it holds the bone and helps to move
I don't know if this is right
what is the mass of a vehicle that has 50,000 N and 25M/S/S
Answer:
F = 1250000 N
Explanation:
If you have 50,000 S, by 25 M. It would be calculated to 1,250,000 N.
Calculate the average acceleration for a car moving linearly and braking to a stop from 30 m/s in 5 seconds.
The average acceleration of the car moving linearly is 6 m/s².
What is acceleration?
Acceleration is a vector quantity that is defined as the rate at which an object changes its velocity.
a = Δv/Δt
where;
Δv is change in velocityΔt is change in time of motionThe average acceleration of the car moving linearly is calculated as follows;
a = 30 m/s / 5 s
a = 6 m/s²
Thus, the average acceleration of the car moving linearly is 6 m/s².
Learn more about average acceleration here: https://brainly.com/question/104491
#SPJ1
calculate the velocity (in m/s) of an ocean wave that has a wavelength of 50 meters and a frequency of 0.1 hz.
The ocean wave velocity is 5m/s.
What is wave velocity?
Wave speed commonly refers to velocity, but velocity actually means both speed and direction. A wave's velocity is equal to its wavelength times its frequency (the number of oscillations per second) and is independent of its intensity.
When a point in a rigid body oscillates, both transverse waves (waves in which the point oscillates transversely to the direction of travel) and longitudinal waves (waves in which the point oscillates in the same direction as the direction of travel) are emitted at the same frequency. Longitudinal waves are random, with longer wavelengths traveling faster. Seismic waves, therefore, consist of both longitudinal (P, primary) and transverse (S, secondary) waves and travel through the Earth at two velocities.
Wave velocity is related to wavelength and frequency by the following equations:
Velocity = wavelength x frequency
Using the above formula, we can easily calculate the ocean wave velocity as follows:
Velocity = 50 x 0.1
Velocity = 5m/s
From the calculation above, we know that the ocean wave velocity is 5m/s.
To learn more about wave velocity , visit:
https://brainly.com/question/12288304
#SPJ4
HELPPPPP
Find an article about recent findings in physics from a reputable source. A quick Internet search can help you find good sources for physics-related articles. If you're unsure about the validity of your source, consult your teacher.
After you've read your article, complete the following in a post on this page:
Summarize it in 1-2 paragraphs.
In an additional paragraph, discuss any evidence presented in the article. Use the following questions to help guide you:
What, if anything, does this evidence support? Is it relevant to the author's main idea(s)?
Is a claim made or a position taken on a scientific issue? If so, to what degree does the evidence and reasoning in the text support that claim?
Cite your source.
Answer: hope this helps
wrote this last year
Explanation:
Why it is important to study the universe
There are many reasons why it is important to study the universe, such as we would know nothing about zodiac signs, planets, why and how the dinosaurs died. The universe is an interesting place, and so much of it hasn't been explored. NASA (National aeronautics and space administration) is an agency that is responsible for development and research of vehicles and activities in space.
The eight planets in your solar system are:
Jupiter~ named after Zeus the king of the gods.
Mars~ Named after the Roman god of war.
Uranus~ named after the Greek god of the sky ( Zeus. )
Mercury~ named after the Roman messenger god.
Venus~ named after the Roman goddess of love and beauty.
Saturn~ named after the Roman god of agriculture and wealth.
Earth~ is the only planet not named after anybody but its nickname is “the blue planet”
Now if we did not study the universe then how would we know all of that? The universe is a BIG place and we are like Preons ( particles that are the building block to Quarks, Quarks are the particles in protons and neutrons ) compared to the universe.
Did you know that they have discovered an ocean on Jupiter? The ocean on Jupiter is 11 kilometer deep. It has also been discovered that it rains diamonds on Jupiter and Saturn. One thing about the universe that is interesting to me is our moon, the moon comes in many colors such as:
Blue moon
Pink moon
Red moon
Yellow moon
Orange moon
There is also different types of solar eclipse:
Total eclipse~
Partial eclipse~
Annular eclipse~
The moon also has different phases as well:
Waning crescent
Third quarter
Waning gibbous
FULL MOON
Waxing gibbous
First quarter
Waxing crescent
Here is a fun fact about the moon, the moon is neither a star nor a planet, it is a satellite object. The first man on the moon was Neil Armstrong, and he was a part of Apollo 11, and Gemini 8. One of my favorite quotes from him is “ Mystery creates wonder and wonder is the basis of man’s desire to understand.” Did you know that if you go to Death Valley, CA you can see the milky way from earth. One of the things I love about the universe is that it is full of mysteries. Lots of things we don't know about the earth and there are a lot of things we would not know if we didn't study the universe. Zodiac signs are the groups we put everyone in. These groups we are put in are deciphered by what month we are born in. The zodiac signs are what groups we are in according to the universe.
How much force is required to accelerate an 8kg mass at 5m/s^2 if there is 14N of friction
Answer:
Explanation:
How much force is required to accelerate an 8kg mass at 5m/s^2 if there is 14N of friction.
Answer:
54 N
Explanation:
By Newton's second law the force acting on an object is related to its mass and acceleration
F = m x a where
where m = mass of the object and a is the acceleration
Here m = 8 kg and a = 5m/s² so
F = 8 x 5 =40 Newtons (measure of force)
But there is an opposite force due to friction of 14 Newtons
So net force required to overcome this friction and accelerate the object of mass 8kg to 5m/s² = 40 + 14 = 54 Newtons
Suppose you are observing a binary star with a telescope and are having difficulty resolving the two stars. You decide to use a colored filter to maximize the resolution. (A filter of a given color transmits only that color of light.) What color filter should you choose? (a) blue (b) green (c) yellow (d) red
The color filter that a person need to choose is option (a) blue.
Why choose the blue color?The reduction of the wavelength of the light is one that tends to make the aperture to be bigger if it is said to be relative to the light wavelength, by rising the resolving power. So, one need to choose a blue filter.
The Blue light filter is one that can act by lowering the amount of blue light that is shown on the screen of telescope device.
note that the blue light can tends to suppress the creation of melatonin thus making it to be filtering it out.
Therefore, based on the above, The color filter that a person need to choose is option (a) blue.
Learn more about color filter from
https://brainly.com/question/14407604
#SPJ2
Which other element is most likely to be a nonreactive gas?
A. Argon (AI)
B. Nitrogen (N)
C. Hydrogen (H)
D. Boron (B)
Answer:
A. Argon
Explanation:
It is a noble gas, a group which is not reactive.
The second create the bottom of the table is called the
Answer:i don't understand
Explanation:
Two children are bouncing small rubber Ball. One child simply drops ball. At the same time, the second child throws a ball downward so that it has an initial speed of 10m/s what is the acceleration of each ball while in motion
The acceleration of each ball while in motion is the acceleration due to gravity, that is 9.81 m/s²
How to illustrate the information?Here one child simply drops a ball. The second child simultaneously launches a ball downward at a 10-meter-per-second initial speed.
In first case acceleration on the ball is the acceleration due to gravity, it should be noted that in the second case also acceleration on the ball is the acceleration due to gravity,
Therefore, only gravitational force is acting on both cases so their acceleration is the acceleration due to gravity. Therefore, the acceleration of each ball while in motion is the acceleration due to gravity, that is 9.81 m/s².
Learn more about acceleration on:
https://brainly.com/question/13298626
#SPJ1
WHAT IS THE interelationship between environment and mineral
The interrelationship between the environment and minerals can be that when we do mineral extraction we may harm the environment.
Mineral extraction is generally known as mining. mining can be hazardous as well as beneficial to us. Mining can do damage to the natural environment. Mineral extraction can also reduce the underground water table. Mining techniques often need a larger and more expansive piece of land. Deforestation is a byproduct of mining, and the construction of mining regions necessitates the construction of roads and housing for mine personnel, and vegetation farms are frequently eliminated. The rising human population is wreaking havoc on the environment by spewing gas and dust into the atmosphere.Minerals can harm the land and water and permanently damage the natural landscape. But mining can have some positive impact on society, regions, etc. So, the interrelationship between the environment and minerals is deteriorating as one’s extraction will harm another.Know more about the impact of the mining process on the environment in detail from the given below link:
brainly.com/question/3715880
#SPJ9
How does hydropower generate electricity?
Answer:
the water spins the wheel wiche gives energy.
Explanation:
Carlo and Sara push on a desk in the same direction. Carlo
pushes with a force of 50 N, and Sara pushes with a force of
40 N. What is the total resultant force acting on the desk?
Whats the answer to this question?
Answer:
90N
Explanation:
The total resultant force acting on the desk being pushed by Sara and Carlo is 90N
A resultant force is a singular force that will act the same effect as the forces acting on a body.
When two or more forces acts on a body in the same direction, their resultant is the sum of the individual forces. If it is in the opposite direction, the differences is the resultant force. The body will move in the direction of the applied force with a higher magnitudeSo;
Resultant force = Force applied by Sara + Force applied by Carlo
Resultant force = 50N + 40N = 90N
A toy doll and a toy robot are standing on a frictionless surface facing each other. The doll has a mass of 0. 20 kg, and the robot has a mass of 0. 30 kg. The robot pushes on the doll with a force of 0. 30 n. The magnitude of the acceleration of the robot is.
By the force, the acceleration of robot is 1.5 m / s².
We need to know about force to solve this problem. Force will proportional to mass and acceleration. It can be written as
F = m . a
where F is force, m is mass and a is acceleration
From the question above, we know that
m = 0.2 kg
F = 0.3 N
By substituting the parameters, we know that
F = m . a
0.3 = 0.2 . a
a = 0.3 / 0.2
a = 3/2
a = 1.5 m / s²
Hence, the acceleration of robot is 1.5 m / s².
Find more on force at: https://brainly.com/question/25239010
#SPJ4
A boat travels 12. 0 m while it reduces its velocity from 9. 5 m/s to 5. 5 m/s. What is the magnitude of the boat’s acceleration while it travels the 12. 0 m?.
The calculated acceleration is -2.5 m/s²
In accordance with the data in the question, we have:
Initial speed (u) is 9.5 m/s.
Final speed (v): 5.5 m/s
(s) = distance traveled (12 m).
Calculate the boat's acceleration, please. The third equation of motion yields v²=u²+ 2as, where v stands for final velocity.
u stands for beginning speed.
A stands for acceleration.
s stands for distance.
(5.5)²-(9.5)²= 2*a*12
30.25-90.25=24*a
-60=24*a
a=-2.5 m/s⁻²
Learn more about acceleration here-
https://brainly.com/question/12550364
#SPJ4
a Model Changing classes, you walk 20.0 m down a
hall, turn left, and then walk 10.0 m down another hall. Define a
coordinate system and sketch the displacement vector. Also, sketch the
displacement components, and then determine the vector's magnitude.
Answer:
Explanation:
potato :D
a diver initially moving horizontally with speed v dives off the edge of a vertical cliff and lands in the water a distance d from the base of the cliff. how far from the base of the cliff would the diver have landed if the diver initially had been moving horizontally with speed 2v?
The time(t) in the air for a horizontal projectile is dependent on the distance travelled(d) and its initial velocity(v).
i.e. t = d/v
Since the time for the projectile in the air is same at both v and 2v, the distance at speed 2v will be double than that of the distance at speed v.
An object that is in motion in the air with no force other than gravity, then the path travelled by the object is called as projectile.
The driver must have landed to the distance 2d from the base of the cliff, when he dives with the speed 2v.
To know more about projectile,
https://brainly.com/question/14290721
#SPJ4
An alien spaceship traveling at 0.600 c toward the Earth launches a landing craft. The landing craft travels in the same direction with a speed of 0.800 c relative to the mother ship. As measured on the Earth, the spaceship is 0.200 ly from the Earth when the landing craft is launched.(c) What travel time is required for the landing craft to reach the Earth as measured by the aliens on the mother ship?
The travel time is required for the landing craft to reach the Earth as measured by the aliens on the mother ship is 4.5*10^6m/s.
To find the answer, we have to know about the Lorentz transformation.
What travel time is required for the landing craft to reach the Earth as measured by the aliens on the mother ship?It is given that, an alien spaceship traveling at 0.600 c toward the Earth, in the same direction the landing craft travels with a speed of 0.800 c relative to the mother ship. We have to find the time travel for the landing craft to reach the Earth as measured by the aliens on the mother ship.
It is given that; the spaceship is 0.200 ly from the Earth when the landing craft is launched.We have the expression for time travelled as,[tex]t=\frac{d}{v}[/tex]
where; d is 0.2 light years, and the value of v will be 0.8c+0.6c
[tex]t=\frac{0.2ly}{0.8c+06c} =\frac{0.2*9.46*10^{15}m}{1.4*3*10^8s} =4.5*10^6m/s[/tex]
Thus, we can conclude that, the travel time is required for the landing craft to reach the Earth as measured by the aliens on the mother ship is 4.5*10^6m/s.
Learn more about the frame of reference here:
https://brainly.com/question/20897534
#SPJ4
A 12kg object experiences a net force of 120 N. What is the acceleration will this object experience?
Answer:
a = 10m/s^2
Explanation:
Recall that F=ma, therefore, to find acceleration, we need to rearange the equation in such a manner that it would equal acceleration:
[tex]F=ma\\\frac{F}{m} =a\\\\\frac{120N}{12kg}=a\\10m/s^2=a[/tex]
A rocket is in a roughly circular orbit near the surface of the earth, moving at around 5 miles per second. Suppose that it is desired to lower it to a new circular orbit, sliightly closer to the surface. The rocket flips over and fires its main rocket engine in a short burst to slow its speed to 4. 96 miles per second. What must it do next?.
The rocket slows its speed again a little when the distance from the earth stops decreasing.
While the rocket is in a roughly circular orbit near the surface of the earth and is moving at around 5 miles per second. To decrease it to a new circular orbit, slightly near to the surface. The rocket reverse and shoots its main rocket engine in a short burst to decrease its speed to 4. 96 miles per second. The response of the rocket is based on escape velocity which is referred to as the minimum speed required to reach an infinite distance for a free object to escape from the gravitational influence of an immediate body.
To know more about the escape velocity of a rocket refers to the link https://brainly.com/question/10979668?referrer=searchResults.
#SPJ4
Derive a relation for the length of a rod at a given tempreture t 0c when l0 is its length at 0 0c
The relation for the length of road at a given temperature, L at t°c = L0(1 + αΔT)
When a rod is heated from 0°c to a temperature t°c, its length increases which is given by the following formula
ΔL/L0 = αΔT
Where ΔL = change in length = L- L0
Thus,
L-L0/L0 = αΔT
⇒ L-L-L0 = L0(αΔT)
⇒ L = L0 + L0(αΔT)
Or L = L0(1 + αΔT)
Here L is the length at temperature t°c
L0 is the length at 0°c
α = coefficient of thermal expansion
ΔT = change in temperature
Thus, the relation for the length of road at a given temperature, L at t°c = L0(1 + αΔT).
To know more about "thermal expansion", refer to the link given below:
brainly.com/question/26902570?referrer=searchResults
#SPJ4
what make molecules
Answer:
Molecules are made up of atoms that are held together by chemical bonds. These bonds form as a result of the sharing or exchange of electrons among atoms. The atoms of certain elements readily bond with other atoms to form molecules. ... The element helium is a one-atom molecule.
Answer:
Molecules are formed when two or more atoms of an element chemically join together.Explanation:
Please mark my answer as a brainliest ❤❤❤A log with a mass of 90.0 kg falls off a cliff with a height of 31.2 m cliff. Assume g = 9.8 ms-2 What energy transformation occurs?
Answer:
kinetic energy
Explanation:
Acceleration is measured in what
Answer:
meters per second squared
m/s^2
Explanation:
Hope this helps! :3
plz mark as brainliest!
Answer:
Acceleration is measured in m/s2 (meters per second squared)
Explanation:
A car weighing 12,000 N is parked on a 36° slope. The car starts to roll down the hill. What is the acceleration of the car?
Given that,
Weight of a car, W = 12,000 N
It is parked on a 36° slope.
To find,
The acceleration of the car.
Solution,
Let m be the mass of the car. Using formula for weight of an object.
W = mg
[tex]m=\dfrac{12000}{9.8}\\\\=1224.48\ kg[/tex]
Let a be the acceleration of the car. Using second law of motion as follows :
[tex]a=\dfrac{F_{\text{parallel}}}{m}\\\\=\dfrac{F\sin\theta}{m}\\\\=\dfrac{12000\times \sin(36)}{1224.48}\\\\=5.76\ m/s^2[/tex]
So, the acceleration of the car is [tex]5.76\ m/s^2[/tex].
What is the fault-current circuit breaker? Describe its function.
Answer:
A circuit breaker is a switching mechanism that interrupts the current that is irregular or fault. It is a mechanical system that interferes with high magnitude (fault) current flow and also performs a transfer operation. Hope this helps :)
Explanation:
Answer:
A circuit breaker is an electrical switch designed to protect an electrical circuit from damage caused by an overcurrent or short circuit.
Explanation:
Its basic function is to interrupt current flow after protective relays detect a fault.
A can of corn heas a diameter of 6.6 centimeters and a height of 9.9 centimeters. How much corn can tue can hold?
Answer:
338.7cm
Explanation:
The can of corn would be in the shape of a cylinder. Since we are looking at capacity, we will want to find the volume.
V=abase×h
V=πr2×h
V=π(d2)2×h
V=π(6.62)2×9.9
V=338.7cm3
Hopefully this helps!
Answer:
338.7 cm³
Explanation:
For this question you use the volume formula of a cylinder πr²h.
Radius is 1/2 the diameter.
Simply input the variables into the formula.
π(3.3)²×9.9 = 107.811π or approximately 338.7 cm³
The pattern shown in the photo is the result of a time-lapsr video of a clear night sky
Which mostly likely causes the apparent motion of the stars seen in this photo?
A. Earth's revolution around the Sun
B. The revolution of the Stars around the Sun
C. Earth's rotation on its axis
D. The revolution of the stars
around Earth
Answer:
C.
Explanation:
Answer:
C
Explanation:
The earths rotation on its axis