HELP PLEASEEE it’s due soon

Answer:

E = 0.1472  J

Explanation:

Given that,

The number of turns in the solenoid, N = 2100

Area of the solenoid, A = 10 cm² = 0.001 m²

The length of the solenoid, l = 30 cm = 0.3 m

Current in the solenoid, I = 4 A

We need to find the magnetic energy stored in the solenoid. The expression for the stored energy is :

[tex]E=\dfrac{1}{2}LI^2[/tex]

Where

L is self inductance of the solenoid,

[tex]L=\dfrac{\mu_oN^2A}{l}\\\\L=\dfrac{4\pi \times 10^{-7}\times 2100^2\times 0.001}{0.3}\\\\L=0.0184\ H[/tex]

So,

[tex]E=\dfrac{1}{2}\times 0.0184\times 4^2\\\\E=0.1472\ J[/tex]

So, 0.1472  J of energy is stored in the solenoid.

Answer:

0.01 Ω

Explanation:

Given that the output voltage varies by 5 mV when loaded from 0.01 A to 1 A

Therefore, the regulators output resistance is given by :

[tex]$I_L=\frac{V_L}{R_L}$[/tex]

[tex]$(1.00 - 0.01)A= \frac{5 \ mV}{R_L}$[/tex]

[tex]$0.99 \ A= \frac{5 \ mV}{R_L}$[/tex]

∴ The line and load regulation is 0.01 Ω

Answer:

The final speed will be "[tex]1.185\times 10^7 \ m/sec[/tex]".

Explanation:

The given values are:

Potential difference,

Δv = 400 v

Radius,

r = 0.5580 cm

As we know,

⇒  [tex]W=e \Delta v[/tex]

and,

⇒  [tex]\frac{1}{2}mv^2=e \Delta v[/tex]

then,

⇒  [tex]v=\sqrt{\frac{2e \Delta v}{m} }[/tex]

On substituting the values, we get

⇒     [tex]=\sqrt{\frac{2\times 1.6\times 10^{-19}\times 400}{9.11\times 10^{-31}} }[/tex]

⇒     [tex]=\sqrt{\frac{1.6\times 10^{-19}\times 800}{9.11\times 10^{-31}}}[/tex]

⇒     [tex]=1.185\times 10^7 \ m/sec[/tex]

Answer:

Option D. ²³⁹₉₃Np

Explanation:

From the question given above, the following data were:

²³⁹₉₂U —> ⁰₋₁e + __

Let ⁿₘX represent the unknown. Thus, the equation above becomes

²³⁹₉₂U —> ⁰₋₁e + ⁿₘX

Next, we shall determine n, m and X. This can be obtained as follow:

239 = 0 + n

239 = n

n = 239

92 = –1 + m

Collect like terms

92 + 1 = m

93 = m

m = 93

ⁿₘX => ²³⁹₉₃X => ²³⁹₉₃Np

Thus, the balanced equation becomes:

²³⁹₉₂U —> ⁰₋₁e + ⁿₘX

²³⁹₉₂U —> ⁰₋₁e + ²³⁹₉₃Np

Option D gives the correct answer to the question.

Answer:

D

Explanation:

239 93 Np

Answer:

The answer is "[tex]11.55780\ m[/tex]"

Explanation:

Using formula:

[tex]= 2 \pi f= \frac{2\pi}{T} =\sqrt{\frac{g}{L}}[/tex]

L = length of pendulum.

[tex]= T =2 \pi \sqrt{\frac{L}{g}}[/tex]

Calculate the value for L:  

[tex]L= g (\frac{T}{2 \pi})^2 \\\\[/tex]

  [tex]= (9.80 \ \frac{m}{s^2}) (\frac{6.82 \ s}{2 \pi})^2\\\\= (9.80 \ \frac{m}{s^2}) (\frac{46.5124 \ s^2}{4 \times \pi^2})\\\\= (9.80 \ \frac{m}{s^2}) (\frac{46.5124\ s^2}{4 \times 9.8596 })\\\\= (9.80 \ \frac{m}{s^2}) (\frac{46.5124 \ s^2}{ 39.4384 })\\\\= \frac{455.82152}{39.4384} \ m\\\\=11.55780\ m[/tex]

The height of the tower = 11.55780 m

Answer:

vcyl / vsph = 1.05

Explanation:

       [tex]K_{trans} = \frac{1}{2}* M* v_{cm} ^{2} (1)[/tex]

       [tex]K_{rot} = \frac{1}{2}* I* \omega ^{2} (2)[/tex]

       [tex]v = \omega * R (3)[/tex]

       [tex]K_{rot} = \frac{1}{2}* \frac{1}{2} M*R^{2} * \frac{v_{cmc} ^{2}}{R^{2}} = \frac{1}{4}* M* v_{cmc}^{2} (5)[/tex]

       [tex]K_{cyl} = \frac{1}{2}* M* v_{cmc} ^{2} +\frac{1}{4}* M* v_{cmc}^{2} = \frac{3}{4}* M* v_{cmc} ^{2} (6)[/tex]

        [tex]I_{sph} = \frac{2}{3} * M* R^{2} (7)[/tex]  

       [tex]K_{rot} = \frac{1}{2}* \frac{2}{3} M*R^{2} * \frac{v_{cms} ^{2}}{R^{2}} = \frac{1}{3}* M* v_{cms}^{2} (8)[/tex]

      [tex]K_{sph} = \frac{1}{2}* M* v_{cms} ^{2} +\frac{1}{3}* M* v_{cms}^{2} = \frac{5}{6}* M* v_{cms} ^{2} (9)[/tex]

       [tex]\frac{v_{cmc}}{v_{cms}} =\sqrt{\frac{10}{9} } = 1.05 (10)[/tex]

Answer:

[tex]24.9\ \text{m/s}[/tex]

[tex]206.7\ \text{m}[/tex]

Explanation:

m = Mass of skydiver = 80 kg

[tex]x_1[/tex] = Height for which the parachute is closed = 1000-200 = 800 m

[tex]x_2[/tex] = Height for which the parachute is open = 200 m

[tex]f_1[/tex] = Resistive force when parachute is closed = 50 N

[tex]f_2[/tex] = Resistive force when parachute is open = 3600 N

v = Velocity of skydiver on the ground

g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]

h = Height from which the skydiver jumps = 1000 m

The energy balance of the system will be

[tex]mgh-f_1x_1-f_2x_2=\dfrac{1}{2}mv^2\\\Rightarrow 80\times 9.81\times 1000-50\times 800-3600\times 200=\dfrac{1}{2}\times 80\times v^2\\\Rightarrow v=\sqrt{\dfrac{2(80\times 9.81\times 1000-50\times 800-3600\times 200)}{80}}\\\Rightarrow v=24.9\ \text{m/s}[/tex]

The velocity fo the skydiver when he lands will be [tex]24.9\ \text{m/s}[/tex]

x = Height where the person opens the parachute

v = 5 m/s

[tex]mgh-f_1x_1-f_2x_2=\dfrac{1}{2}mv^2\\\Rightarrow 80\times 9.81\times 1000-50\times (1000-x)-3600\times x=\dfrac{1}{2}\times 80\times 5^2\\\Rightarrow 80\times 9.81\times 1000-50000+50x-3600x=\dfrac{1}{2}\times 80\times 5^2\\\Rightarrow x=\dfrac{80\times 9.81\times 1000-50000-\dfrac{1}{2}\times 80\times 5^2}{3550}\\\Rightarrow x=206.7\ \text{m}[/tex]

The height at which the parachute is to be opened is [tex]206.7\ \text{m}[/tex]

T

Answer:

the velocity is a second final to initial velocity of 39

Answer:

The example of the center of the gravity is the middle of a seesaw

Explanation:

I hope this will help you and plz mark me brainlist

Answer:

less than one lightyear=d

Explanation:

I took the test.:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D::):):):):):):):):):):):):):):):):):):):):):)

Answer:

C) 413 Hz

Explanation:

For destructive interference, the path difference ΔL = (n + 1/2)λ where ΔL = L₂ - L₁ where L₁ = person's distance from one speaker (the closer one) = 5.0m and L₂ = person's distance from other speaker (the farther one) = 6.2 m and λ = wavelength = v/f where v = speed of sound = 330 m/s and f = frequency

So, ΔL = (n + 1/2)λ

L₂ - L₁  = (n + 1/2)v/f

f = (n + 1/2)v/(L₂ - L₁)

At the second lowest frequency that results in destructive interference at the point where the person is standing, n = 1.

So,

f = (1 + 1/2)v/(L₂ - L₁)

f = 3v/2(L₂ - L₁)

Substituting the values of the variables into the equation, we have

f = 3v/2(L₂ - L₁)

f = 3(330 m/s)/2(6.2 m - 5.0 m)

f = 3(330 m/s)/2(1.2 m)

f = 990 m/s ÷ 2.4 m)

f = 412.5 Hz

f ≅ 413 Hz

Answer:

a). Single replacement.

Explanation:

Because one element replaces another element in a compound

Answer:

1 W = 1 J / sec       Definition of watt is 1 joule / sec

So if a bulb uses 75 J / sec it must use

75 J/s * 60 sec / min = 4500 J/min    energy used by bulb

If bulb is 15% efficient then the light delivered is

P = 4500 J / min * .15 = 675 J / min

Explanation:

mass, m = 5kg

initial velocity, u = 16m/s

final velocuty, v = -22m/s

change in momentum, ∆p = ?

∆p = m (v-u)

5(-22-16)

5(38)

∆p = 190kgm/s

check the calculations!

Choice-A is the main reason that people use the thing in the picture.

1: Ming

2: Chloe

3: 40m

Answer:

ultraviolet light

plz mark me as brainliest.

Answer:

Ultra violet

Explanation:

Answer:

Wait lang po sandali po wait lang

Answer:

3.35

Explanation:

Got it on Acellus

The light of wavelength 485 nm passes through a single slit. The single between the first (m=1) and second (m=2) interference minima is 3.36°.

Diffraction is the phenomenon of bending of waves through obstacles.  

Given is the wavelength λ= 485 nm, silt width d =  8.32 *10⁻⁶ m, then the angle θ will be

d sinθ =mλ

for m=1, sin θ₁ = λ/d

for m=2, sin θ₂ = 2λ/d

Substitute the values into both expressions to find the angles,

sin θ₁ = 485 x 10⁻⁹ /  8.32 *10⁻⁶

θ₁ = 3.34°

and sin θ₂ = (2 x  485 x 10⁻⁹ )/  8.32 *10⁻⁶

θ₂ = 6.7°

The angle between m =1 and m=2 will be

θ₂ -θ₁ = 6.7° - 3.34° =3.36°

Thus, angle between the first (m=1) and second (m=2) interference minima is 3.36°.

Learn more about diffraction.

https://brainly.com/question/12290582

#SPJ2

Answer:

[tex]0.842\ \text{lb ft}[/tex]

[tex]0.1052\ \text{lb ft}[/tex]

Explanation:

d = Diameter of wheel = 6 in

r = Radius = 3 in = [tex]\dfrac{3}{12}=0.25\ \text{ft}[/tex]

t = Thickness = [tex]\dfrac{3}{4}=0.75\ \text{in}=\dfrac{0.75}{12}\ \text{ft}[/tex]

w = Specific weight = [tex]425\ \text{lb/ft}^3[/tex]

[tex]t_2[/tex] = Time taken to slow down = 35 s

[tex]t_1[/tex] = Time taken to reach operating speed = 5 s

[tex]\omega[/tex] = Angular velocity = [tex]3450\times \dfrac{2\pi}{60}\ \text{rad/s}[/tex]

Weight is given by

[tex]W=2\pi r^2tw\\\Rightarrow W=2\pi\times 0.25^2\times \dfrac{0.75}{12}\times 425\\\Rightarrow W=10.43\ \text{lbs}[/tex]

Mass is given by

[tex]m=\dfrac{W}{g}\\\Rightarrow m=\dfrac{10.43}{32}\\\Rightarrow m=0.326\ \text{lb}[/tex]

Moment of inertia is given by

[tex]I=\dfrac{mr^2}{2}\\\Rightarrow I=\dfrac{0.326\times 0.25^2}{2}\\\Rightarrow I=0.01019\ \text{lb ft}^2[/tex]

Angular acceleration while slowing down is given by

[tex]\alpha_f=\dfrac{\omega}{t_2}\\\Rightarrow \alpha_f=\dfrac{3450\times \dfrac{2\pi}{60}}{35}\\\Rightarrow \alpha_f=10.32\ \text{rad/s}^2[/tex]

Frictional moment is given

[tex]\tau_f=I\alpha_f\\\Rightarrow \tau_f=0.01019\times 10.32\\\Rightarrow \tau_f=0.1052\ \text{lb ft}[/tex]

Frictional moment is [tex]0.1052\ \text{lb ft}[/tex]

Angular acceleration while speeding up is given by

[tex]\alpha=\dfrac{\omega}{t_1}\\\Rightarrow \alpha=\dfrac{3450\times \dfrac{2\pi}{60}}{5}\\\Rightarrow \alpha=72.26\ \text{rad/s}^2[/tex]

Motor torque is given by

[tex]\tau_m=\tau_f+I\alpha\\\Rightarrow \tau_m=0.1052+0.01019\times 72.26\\\Rightarrow \tau_m=0.842\ \text{lb ft}[/tex]

Motor torque is [tex]0.842\ \text{lb ft}[/tex].

Explanation:

When you get closer to the mirror than the focal point a virtual image is formed behind the mirror and this image is not inverted. That's why the image flips as you get closer. ... With a virtual image the light rays never come to a focus so there is no place you can put a piece of paper to see the image.

Answer:

The induced current can be increased in the coil in the following ways: By increasing the strength of the magnet. By increasing the speed of the magnet through the coil.

Explanation:

Answer:

A main sequence star is powered by fusion of hydrogen into helium in its core

Explanation:

Hello. Your question is incomplete. However, I managed to find it completely on the internet and I realized that you forgot to mention that the question asks you for the maximum energy difference between velovistas and non-athletes, considering that the spring constant for the tendon of the two groups is equal to 33n/mm.

To make this calculation you will need to use Hooke's law, using the formula: ¹/2*K*x², where "K" will be the value of the spring constant for the tendon and "X" will be the value of the sprinter and non-athlete terms.

So for the sprinter we will have the calculation:

¹/2*33*41² -------> 0,5*33*1681 = 27736. 5 Nmm

(To facilitate the calculation, first solve the division of ¹/2 and then multiply 41 by 41, lastly, just multiply all the results.)

For the non-athlete we will have the calculation:

¹/2*33*33² -------> 0,5*33*1089 = 17968. 5 Nmm

(To facilitate the calculation, first solve the division of ¹/2 and then multiply 41 by 41, lastly, just multiply all the results.)

Now, to reach the final result, you only need to subtract the two values presented by the sprinter and the non-athlete.

27736.5 - 17968.5 = 9768 Nmm

Answer:

the answer is A

I wish you a good day!

Answer:

THe answer is graph 2 as it represents the puck going in a linear motion

Explanation:

i have no idea

I don't even know how we are here

Answer:

6.12 m/s

Explanation:

Using the law of conservation of momentum

momentum before collision = momentum after collision

m₁v₁ + m₂v₂ = (m₁ + m₂)V    (since the train cars become attached to each other) where m₁ = mass of car 1 = 1,825 kg, m₂ = mass of car 2 = 2,645 kg, v₁ = initial velocity of car 1 = + 15.0 m/s (positive since it is moving in the positive x direction), v₂ = initial velocity of car 2 = 0 m/s (since it is initially stationary) and V = velocity of both cars after collision,

So, m₁v₁ + m₂v₂ = (m₁ + m₂)V  

m₁v₁ + m₂(0 m/s) = (m₁ + m₂)V  

m₁v₁ + 0 = (m₁ + m₂)V  

V = m₁v₁/(m₁ + m₂)

substituting the values of the other variables into the equation, we have

V = 1,825 kg × 15.0 m/s/(1,825 kg + 2,645 kg)

V = 27375 kgm/s/ 4470kg

V = 6.124 m/s

V ≅ 6.12 m/s

Answer:

The Solar System has plants? I assume you meant planets. If so, that is false

Explanation: