helppppppppppppppppppppppppppppppppppppppppppppppppppp

The energy of the photon is 1.5 * 10^-19 J

According to the Bohr model of the atom, the atom is arranged in energy levels. It is possible for an electron to transition from a lower to a higher energy level by the gain of energy. The energy that is gained must be equal to the difference in energy between the lower and the higher energy levels of the atom.

No we know that we could use the Rydberg formula to obtain the wavelength of the photon that is emitted when an electron moves from a higher to a lower energy level with the emission of the energy that was taken in.

Thus;

1/λ = RH (1/n^2 final – 1/n^2 initial)

RH =  1.09678 x 10⁷ m⁻¹

n final = 3

n initial = 5

1/λ =1.09678 x 10⁷ (1/3^2 – 1/5^2)

1/λ = 1.09678 x 10⁷ (0.11 – 0.04)

λ = 1302 nm

E = hc/ λ

E = 6.6 * 10^-34 *  3 * 10^8/1302 * 10^-9

E = 1.5 * 10^-19 J

Learn more about energy of a photon:https://brainly.com/question/2393994

#SPJ1

Trends in modern periodic table are:

variation of valency, atomic size , metallic properties and  electronegativity

Valency - number of valence electrons  . Elements of each group have same number of valence electrons. So, they have the same valency.

Atomic size- It is distance from the centre of the nucleus to the valence shell of the atom.

Metallic properties -

Electronegativity-

So we can conclude that periodic trends are specific patterns which are present in the periodic table,  that illustrate different aspects of a certain element

Learn more about periodic trends at https://brainly.com/question/3388510

#SPJ9

Explanation:

What noise pollution affecting local fauna...what harmful particulates are in the air we breath?

Toxic Coliforms in drinking water? Is light pollution affecting diurnal plants? Chlorine is toxic, Why is it in our tap water?

The energy of an electron at n=2 is determined as  -3.4 eV.

The energy level of  an electron is the fixed distances from the nucleus of an atom where electrons may be found.

The energy of an electron at a known energy level can be calculated using the following formula as shown below.

En = -13.6/n²

where;

Substitute the given parameters and solve for the energy of the electron at the given energy level.

En = (-13.6)/(2²)

En = -3.4 eV

Thus, the energy of an electron at n=2 is determined as  -3.4 eV.

Learn more about energy level here: https://brainly.com/question/14287666

#SPJ1

The percentage of gold in the sample if a 1.00 kg sample of sand containing some gold has a density of 3.10 g/mL is 9.83%.

Let S be the solid sandy mass which is inside the blend

Let G be the gold mass in such a blend

We have to find the percent G by mass

Mixture density can be calculated as

= total blend mass / total blend volume

= 3.10 g/mL

Mixture sum is

S + G = 1 Kg. = 1000g

Complete mixing volume = sand volume + gold volume

Complete mixing volume can be calculated as

=[tex](\frac{sand mass}{sand density} ) + (\frac{gold mass }{gold density} )[/tex]

Total mixture volume:-

[tex]= (\frac{S}{2.84} ) + (\frac{G}{19.3} )\\\\= \frac{(19.3 S + 2.84 G)}{54.812 mL} \\\\Mixture Density = \frac{mass mixture}{mixture volume}\\ \\= 3.10 \frac{g}{mL}[/tex]

⇒ [tex]3.10 = \frac{1000 g}{ \frac{(19.3 S + 2.84 G)}{54.812 mL}}[/tex]

[tex]19.3 S + 2.84 G = 17681\\\\When S+ G = 1000 g\\\\Solving equation:[/tex]

⇒[tex]19.3 S + 2.84 G = 17681[/tex]

∴ [tex]S + G = 1000 g[/tex]

⇒ 19.3 S + 2.84 = 17681

⇒ -2.84 S - 2.84 = -2840

________________________

⇒ 16.46 S = 14841

⇒ S = 901.7g Sand

Given,

⇒ S + G = 1000

⇒ G = 1000 - 901.7 g

⇒ G = 98.3 g Gold

Percentage of gold in the solution is

(98.3/1000) × 100 = 9.83%

Thus, we concluded that the percentage of gold in the sample if a 1.00 kg sample of sand containing some gold has a density of 3.10 g/mL is 9.83%.

Learn more about Density:

https://brainly.com/question/952755

#SPJ9

The percent by mass of Magnesium (Mg) in chlorophyll is 2.69%.

The percent by mass of an element in a compound can be calculated by dividing the atomic mass of the element by the molar mass of the compound multiplied by 100.

The molar mass of chlorophyll is as follows: 12(55) + 1(72) + 24 + 14(4) + 16(5) = 660 + 72 + 24 + 56 + 80 = 892g/mol

Percent mass of Mg = 24/892 × 100

Percent mass of Mg = 0.0269 × 100

Percent mass of Mg = 2.69%

Therefore, the percent by mass of Magnesium (Mg) in chlorophyll is 2.69%.

Learn more about percent by mass at: https://brainly.com/question/5394922

#SPJ1

4.5g of mass of mercury contains the same number of atoms as 90.15g of helium.

With the atomic number 80 and the symbol Hg, mercury is a chemical element. Formerly known as hydrargyrum, which is a combination of the Greek terms hydor (water) and argyros), it is also known as quicksilver (silver). The only other element that is known to be liquid under these conditions is the halogen bromine, however metals like caesium, gallium, and rubidium melt just above ambient temperature. Mercury is a heavy, silvery d-block element.

All around the world, deposits of mercury, primarily in the form of cinnabar, are found (mercuric sulfide). Cinnabar, either natural or manufactured mercuric sulfide, is ground to create the crimson pigment vermilion.

To learn more about mercury from the given link:

https://brainly.com/question/24257702

#SPJ4

There are 4 * 10^24 atoms of hydrogen  in 0.48 moles of prevacid.

The drug prevacid is used as an antacid. What is does is to reduce the amount of acid that could be produced in the stomach of a person. As a result of this, the drug prevacid is able to relieve a person of heartburn and stomach ulcer.

Thus time, we want to obtain the number of hydrogen atoms that id present in one 0.48  moles of the drug prevacid.

We have that there are 14 hydrogen atoms in prevacid. Thus;

14 * 0.48 * 6.02 * 10^23 = 4 * 10^24 atoms of hydrogen.

Learn more about prevacid:https://brainly.com/question/10152810

#SPJ1

Answer:

yes and no

Explanation:

mostly yes because of the gravity but we would de dead    

As the weighed of the earth doubled, gravity also increases. So, there will be fewer or no high tides.

To learn more about gravity, refer to

https://brainly.com/question/9934704

#SPJ2

The density of mercury is 13.6 g/ml, then the density in Ib/ft³ is 21.57 Ib/ft³.

Density can be defined as the measure to how much matter is contained in a specific volume. It can also be defined as a expression of relationship between the mass and the volume.

Dimension of density are ML⁻³

1 kg = 2.2046, 1 ml = 1 cm³

Then, 13.6 g/ml = 13.6 x 2.2046 x 2.54

                          = 76.16 Ib/cm³ = 21.57 Ib/ft³

Thus, the density of mercury is 13.6 g/ml, then the density in Ib/ft³ is 21.57 Ib/ft³.

To learn more about density, refer to the link below:

https://brainly.com/question/15164682

#SPJ1

A calcium sulfate crystal weighing 0.150 grams contains 0.00523 moles of oxygen.

White crystalline calcium sulfate, or CaSO4, is a material. Calcium sulphate is hydrate in the mineral or natural substance known as gypsum. As a food additive, calcium sulfate serves as a thickener, anti-caking agent, dough conditioner, dough strengthener, flour treatment agent, and yeast food. It is a thin, odorless powder that is white or white yellow.

Crystallized calcium sulfate mass = m = 0.150 g

Crystallized calcium sulfate's molecular mass is M = 172 g/mol.

Magnesium nitrate moles are equal to n=0.150/172 g/mol = 0.000872 mol.

6 moles of oxygen atoms make up 1 mole of the calcium sulfate crystal. The calcium sulfate crystal will then have 0.004446 moles.

A calcium sulfate crystal weighing 0.150 grams contains 0.00523 moles of oxygen.

Learn more about calcium sulphate here-

https://brainly.com/question/24202758

#SPJ9

Answer:

196.96657 g/m

Explanation:

The molar mass of gold = 196.96657 g/m. The molar mass of gold is defined as the mass of 1 mole of gold atoms - typically specified in grams. Therefore the molar mass of gold is stated in units of grams/mole or g/m. It is also frequently called the Molecular Weight of Gold.

Grams of H[tex]_{2}[/tex] are needed to produced 12.13 g of NH[tex]_{3}[/tex] are 2.13 g

The balanced chemical equation is :

N[tex]_{2}[/tex]  +   3H[tex]_{2}[/tex]  ------>  2NH[tex]_{3}[/tex]

H = 1 g/mol   and N =14 g/mol

NH[tex]_{3}[/tex] = 17 g/mol =

6g of H[tex]_{2}[/tex] ( 3×2)  = 34 g of  NH[tex]_{3}[/tex] (2× 17)

mass of hydrogen in coumpond ( % mass )  = 6 / 34

                                                                        = 0.1764 or 17.64%

mass of H[tex]_{2}[/tex] required = % mass × mass of ammonia

                                  = ( 0.1764 × 12.13 ) g

                                  2.13 g

Thus , Grams of H[tex]_{2}[/tex] are needed to produced 12.13 g of NH[tex]_{3}[/tex] are 2.13 g

To learn more about ammonia here

https://brainly.com/question/1098222

#SPJ1

If 160.0 g of radioactive iron (59Fe ) is received in the lab today, Then the percentage of the original left after 180 days is 6.25 %.

Radioactive elements are those elements which are made up of those atoms whose nuclei is unstable and emits radiations or undergoes radioactive decay to attain stability or to form stable nuclei.

Given -

t = 180 days

t1/2 = 45 days

So,

n =    t     = 180 = 4

      t1/2       45

Amount of the remaining radioactive iron,

R = R°

     2n

where, n = 4

R =  1   = 0.0625

R°    2₄

To calculate percentage of original sample -

percentage of original sample of iron = R   x 100

                                                                   R°

                                                               = 0.0625 x 100

                                                               = 6.25 %

After 180 days, or 4 half lives, the percentage of radioactive iron remaining is 6.25%.

To learn more about radioactive element,

brainly.com/question/28023256

#SPJ1

Answer:

18g6.02×1023molecules=500gx. 18 g 6.02 × 10 23 molecules = 500 g x .

Explanation:

Answer:

I don't understand snap the equation and send it

12 tablets maximum number of Percocet tablets a patient can take daily

Percocet is a prescription medicine used to treat the symptoms of acute pain and moderate-to-severe pain percocet may be used alone or with other medications percocet belongs to a class of drugs called Analgesics, Opioid Combos every strength also contains 325  this is the weakest dose of Percocet and is what most doctors will start with to help avoid side effects like respiratory depression this dosage is also used to gradually reduce Percocet dosage after dependence has developed, and to limit withdrawal symptoms percocet is a pain reliever for moderate to severe symptom over dose of percocet show side effect on body thats why 12 tablets maximum number of Percocet tablets a patient can take daily.

Know more about Percocet

https://brainly.com/question/28649445

#SPJ1

The final temperature of the canister is 312.76 degrees celsius.

The relation between temperature and pressure is given by the Gay Lusaac’s Law.

According to this law at constant volume, pressure is directly proportional to the temperature.

Mathematically it is as follows,

Pressure (P) ∝ Temperature(T)

P = K T

P/T = K(constant)

Thus the ratio of P/T will remain the same if volume remains constant.

So, P1/T1 = P2/T2

Here P1= initial pressure of the canister = 97.2 kPa = 0.95 atm

P2 = Final pressure of the canister = 1.88 atm

T1 = Initial temperature = 23 c = 296 K

T2 = Final temperature = ?

Putting these values

0.95/296 = 1.88/T2

T2 = 585.76 K or 312.6°C.

Thus, the final temperature of the canister is 312.76 degrees celsius.

To know more about "gas laws", refer to the link given below:

https://brainly.com/question/12669509?referrer=searchResults

#SPJ1

The factor affecting the temperature of ocean water among the given options is depth of the ocean.

The temperature of ocean water varies with the depth. Ocean is divided into the three layers depending on the depth. In the ocean, solar energy reflects in upper surface and rapidly gets absorbed with the depth. Upper layer has depth of around 500 m and temperature 20°C - 25°C.

Second layer is thermocline layer with relatively low temperature of water. It indicates that, the deeper you go into the ocean, less sunlight is there. Therefore, deeper oceans are colder.

Deep ocean water is around 90% of the volume of oceans. It has uniform temperature of around 0-3°C.

Temperature and depth are related in such a way that the temperature decreases when the depth increase.

To learn more about temperature,

brainly.com/question/16792485

#SPJ1

Answer:

Explanation:

Hope this helps

Answer:

0.024 g/mL

Explanation:

The denisty of a substance is a ratio comparing its mass per every 1 unit of volume. Therefore, if you have been given a mass in grams and a volume in milliliters, the unit for denisty (in this case) is g/mL.

Density = ? grams / ? mL

Density = 12 g / 500 mL

Density = 0.024 g/ 1 mL = 0.024 g/mL

The correct answer to the given question is b) The average atomic mass of all isotopes is what an element’s atomic mass is based on in the periodic table.

An element has many isotopic masses, in which elements have same number of protons but different number of neutrons. An element in the periodic table has the average of all the isotopes. Atomic mass is the sum of protons and neutrons, without the involvement of electrons. For example, Chlorine has 2 isotopes Chlorine-35 having atomic mass 35 and Chlorine- 37 having atomic mass 37. The element Chlorine which is found in the periodic table has atomic mass 35.5 u, based on the average atomic masses and their relative abundance.

Therefore, atomic mass of an element on the periodic table is the average of their atomic mass of all isotopes.

Learn more about Atomic masses here:

https://brainly.com/question/5566317

#SPJ9

The pH of a solution prepared by dissolving 2.05 g of sodium acetate in 50 mL of 0.25 M acetic acid is 5.06.

The above situation is a case of buffer solution.

The pH of a buffer solution can be calculated by the Henderson-Hasselbalch equation,

The equation is as follows:

pH = pKa + log[Salt]/[Acid]

In the above case, sodium acetate(CH3COONa) is the salt and acetic acid(CH3COOH) is the acid.

Putting [Salt] = 0.50 M and [Acid] = 0.25 M and pKa = 4.76 in the equation

pH = 4.76 + log[0.50]/[0.25]

pH = 4.76 + log2

pH = 4.76 + 0.30

pH = 5.06

Thus, the pH of a solution prepared by dissolving 2.05 g of sodium acetate in 50 mL of 0.25 M acetic acid is 5.06.

To know more about "buffer solution", refer to the link given below:

https://brainly.com/question/24262133?referrer=searchResults

#SPJ1

Answer:

where is flow diagram.....

.........

What makes hydrogen and helium so unique and removed from the other groups on the periodic table is that unlike all other elements, hydrogen and helium only have a maximum of 2 valence electrons (option C).

Hydrogen and Helium are two elements in the periodic table. They are the lightest elements in the periodic table.

Also, they both exist as gases at room temperature and are the two most common elements in the universe.

However, hydrogen and helium are removed from other groups of the periodic table. Thisis because hydrogen and helium atoms only have two electrons and the outermost energy level is the first energy level, hence, there can only be two valence electrons.

Therefore, what makes hydrogen and helium so unique and removed from the other groups on the periodic table is that unlike all other elements, hydrogen and helium only have a maximum of 2 valence electrons.

Learn more about hydrogen and helium at: https://brainly.com/question/12775092

#SPJ1

Answer: If the amount of fertilizer applied to plants is increased, then plant growth (height) will increase. As the amount of fertilizer increases the plant growth increases.

Explanation: It's correct

In a series circuit, the current can flow through only one path from start to finish.

The term circuit has to do with the path that current can pass through. Charge flows in a circuit in the direction that current is flowing. Also, resistors in a circuit could be connected in series or in parallel.

In a series connection, the resistors are connected end to end an current flows in one direction.

Thus, the statement that is true is that; In a series circuit, the current can flow through only one path from start to finish.

Learn more about circuit:https://brainly.com/question/21505732

#SPJ1

Answer: C. In a series circuit, the current can flow through only one path from start to finish.

(just took the test so C is right)

Answer:

1 a

2 b

3 c

4 d

5 e

Explanation:

i know is corret

The point that would map onto itself after a reflection across the line y = –x is (4, –4). The correct option is d.

A point would have to be on the line in the first place for it to map onto itself following a reflection over the line.

To calculate the point on the given line, just substitute the x-values of the given points and solve for y.

There are three different x-values:  -4, 0, and 4

Substituting these into  y = -x

x = -4  ⇒  y = -(-4) = 4  →  (-4, 4)

x = 0  ⇒  y = -(0) = 0  →  (0, 0)

x = 4  ⇒  y = -(4) = -4  →  (4, -4)

Therefore, the correct option is d, (4, –4).

To learn more about maps, refer to the link:

https://brainly.com/question/16909578

#SPJ1

The question is incomplete. Your most probably complete question is given below:

(–4, –4) (–4, 0) (0, –4) (4, –4)

Answer:

To measure the volume of a large rock, fill a glass measuring cup up to one half with water. Put your large rock in and measure the new water level. Subtract the original half cup volume of water and the difference is the volume or space that your rock takes up.

Answer:

if the rock is small use a measuring cylinder

Explanation: