Answer:
(C). Greater than 1atm
Explanation:
We are aware that water boils at 100 degree Celsius. Water can change its phase and become vapor at 100degree Celsius and at normal pressure which is 1atm.
In the given scenario we have enough temperature to convert water into vapor phase but we don't want it rather we want it to remain in liquid state. This can be achieved by increasing the pressure which was earlier required for vapor phase conversion. So the pressure should be greater than 1atm.
When we increase the temperature the molecules will get enough energy to escape into vapor phase, but when we will increase the pressure, it will provide hindrance to those molecules and will maintain them into Liquid state.
Calculate the pH after 20.0% (by moles) of the benzoic acid is converted to benzoate anion by addition of a strong base. Use the dissociation equilibrium to calculate the pH. pH = ________
Answer:
pH = 4.79
Explanation:
The equilibrium of benzoic acid, BH, is:
BH ⇄ B⁻ + H⁺
Where B⁻ is benzoate anion
Where the dissociation equilibrium, Ka, is:
Ka = 6.46x10⁻⁵ = [B⁻] [H⁺] / [BH]
If 20.0% is B⁻, 80.0% is BH, replacing:
6.46x10⁻⁵ = [20.0%] [H⁺] / [80.0%]
1.615x10⁻⁵ = [H⁺]
As pH = -log [H⁺]
pH = 4.79100. g of ice at 0 is added to 300.0 g of water at 60C. Assuming no transfer of heat to
the surroundings, what is the temperature of the liquid water after all the ice has
melted?
The final temperature of the liquid water after all the ice has melted is equal to 25°C.
What is the specific heat capacity?The specific heat capacity can be described as the quantity of heat needed to raise the temperature in one unit (1kg) of substance by one-degree Celcius.
The formula to show the relationship between the specific heat capacity and heat absorbed or lost is:
Q = mCΔT
Given, the amount of ice, m = 100g
The amount of water, M = 300g
The specific heat capacity of the water, C = 1 cal /g°C
The heat of fusion of ice, C = 80 cal/g
Heat given by water = Heat taken by ice + Heat taken by water formed from ice
300 × 1 ×(60 - T) = 100 × 80 + 100 × 1 ×T
18000 - 300 T = 8000 + 100 T
400 T = 10000
T = 25°C
Learn more about specific heat capacity, here:
brainly.com/question/28302909
#SPJ2
Write the balanced chemical equation for the following reaction. Phases are optional. Solid iron(I) oxide reacts with hydrogen gas to form solid iron and liquid water. 2Fe+3H,Ol Fe,O,+ 3H2 â 2Fe+ 3H2O(I)
Answer:
[tex]Fe_2O_3(s)+3H_2(g)\rightarrow 2Fe(s)+3H_2O(l)[/tex]
Explanation:
Hello!
In this case, when writing chemical reactions from the given names we must make sure we know the proper formula for each reacted and produced species; thus, since solid iron (III) oxide is [tex]Fe_2O_3[/tex], hydrogen gas is [tex]H_2[/tex], solid iron is Fe and liquid water is just [tex]H_2O[/tex], we can write:
[tex]Fe_2O_3(s)+H_2(g)\rightarrow Fe(s)+H_2O(l)[/tex]
However, since different amount of atoms of iron, hydrogen and oxygen are present at each side of the equation, we balance it by adding the following coefficients to each molecule:
[tex]Fe_2O_3(s)+3H_2(g)\rightarrow 2Fe(s)+3H_2O(l)[/tex]
And now it is balanced with two iron atoms, three oxygen atoms and six hydrogen atoms at both reactants and products.
Best regards!
describe, in terms of the motion of particles in an object, how heat conduction transfers energy between objects or from one part of an object to another part at a lower temperature.
Answer:
Molecular movement
Explanation:
When an object gets hotter, its molecules gain more kinetic energy and then move faster. Therefore, the fast-moving molecules will cause those around them to move faster as well, and the colder (or more slow-moving molecule object) object or part is heated up.
PLS GIVE BRAINLIEST
How do living systems follow the laws of conservation of mass?
Answer:
they use it when a living organism dies.
Explanation:
when d organism decomposes carbon is released that enters back into d earth. this follows d law of mass
A sample of 6.44 g of napthalene (C10H8) is dissolved in 80.1 g of benzene (C6H6). Calculate the percent by mass of napthalene in this solution.
Answer:
7.44%
Explanation:
[tex]\frac{6.44}{6.44+80.1} *100=7.44[/tex]
2. What group is Ballardium located? (Bu) *
Answer:
This question appears incomplete
Explanation:
There is no such element known as "Ballardium (Bu)" in the periodic table. However, there are elements with a bit of similarity in spellings and pronunciation such as Beryllium (Be) which is found in group 2 (meaning it is an alkali earth metal), Berkelium (Bk) which is an actinide (meaning it is radioactive) and Vanadium (V) which is found in group 5 of the periodic table (meaning it's a transition metal).
Please help me please i will mark you brainliest. In the nucleus of an atom, there are 17 protons and 18 neutrons. What is the atomic number? What is the atomic mass? How many electrons are there? Be sure to answer all 3 questions.
Answer:
i can only help with 2 :( atimic mass is: 35.453 and number of electrons is:17
Explanation:
Convert 98.5 Pa into mm Hg. (133.32 Pa = 1.00 mm Hg)
The energy of a pendulum is recorded at different positions in the table below. Use the data in the table to determine the amount of kinetic energy the pendulum had at Position 2. Record your answer below.
Please help me I just want to get this test over with
Answer:
so i got 34.5
Explanation:
Select the correct answer. The perimeter of a rectangle is 42 inches. If the width of the rectangle is 6 inches, what is the length? A. 12 inches B. 15 inches C. 21 inches D. 40 inches
Answer:
15
I hope this helps
2 or more forces that are not equal and opposite of one another can cause change in motion
A. Balanced force
B.friction
C.gravitational force
D.unbalanced force
Answer:
D unbalanced force
Explanation:
i think
What is the definition of an Isomer?
Answer:
Each of two or more compounds with the same formula but a different arrangement of atoms in the molecule and different properties.
Explanation:
List what you are thankful for! (It's Thanksgiving! Answer if you bake! Or if you like cakes pies cookies and treats!!! )
Answer:
I do not bake but my mom is a professional baker.
Explanation:
A roof over my head and a warm home.
Plenty of drinkable water.
I don't have to go hungry.
I can enjoy the small and free pleasures of life.
Access to the internet.
My friends and family.
My health.
The kindness of people I have never met before.
When a sample of liquid is heated, its thermal energy _______.
Answer:
Entropy.
Explanation:
I really hope this is right! sorry if its wrong
When a sample of liquid is heated, its thermal energy: increases.
Thermal energy can be defined as the energy possessed by an object due to the movement of its particles.
Basically, the temperature of an object or system is highly dependent on thermal energy.
Hence, temperature is directly proportional to thermal energy.
Additionally, as the temperature of an object increases due to the application of heat, the thermal energy of the object increases.
In conclusion, thermal energy increases when a sample of liquid is heated.
Read more: https://brainly.com/question/22077574
what is the atomic number of oxygen
Answer: The atomic number of oxygen is "O" .
Explanation:
Because Oxygen is the chemical element with the symbol O and atomic number 8. It is a member of the chalcogen group in the periodic table, a highly reactive nonmetal, and an oxidizing agent that readily forms oxides with most elements as well as with other compounds.
In the reaction of aluminum metal and oxygen to make aluminum oxide, how many grams of oxygen gas will react with 2.2 moles aluminum metal?
Answer:
52.8 g of O2.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
4Al + 3O2 —> 2Al2O3
From the balanced equation above,
4 moles of Al reacted with 3 moles of O2 to produce 2 moles of Al2O3
Next, we shall determine the number of mole of O2 needed to react with 2.2 moles of Al. This can be obtained as follow:
From the balanced equation above,
4 moles of Al reacted with 3 moles of O2.
Therefore, 2.2 moles of Al will react with = (2.2 × 3)/4 = 1.65 moles of O2.
Thus, 1.65 moles of O2 is needed for the reaction.
Finally, we shall determine the mass of O2 needed as shown below:
Mole of O2 = 1.65 moles
Molar mass of O2 = 2 × 16= 32 g/mol
Mass of O2 =?
Mole = mass/Molar mass
1.65 = mass of O2 /32
Cross multiply
Mass of O2 = 1.65 × 32
Mass of O2 = 52.8 g
Therefore, 52.8 g of O2 is needed for the reaction.
A ball was massed in a dish. The total mass was 15.6 grams. Treball was placed in a
cylinder containing 26.7 ml of water. The new water level was 38.9 ml. If the mass of the dish is 1.03 grams, what is the mass of the ball?
Answer:
14.57g
Explanation:
Given parameters:
Mass of dish + ball = 15.6g
Initial volume of water in the cylinder = 26.7mL
Final volume of water in the cylinder = 38.9mL
Mass of dish = ?
Unknown
Mass of the ball = ?
Solution;
Since the mass of ball and dish is 15.6g,
Mass of the ball =Mass of ball + dish - mass of the dish
Insert the parameters and solve;
Mass of the ball = 15.6g - 1.03g = 14.57g
A sample of neon gas occupies 5.5 liters at 20°C and 650 mmHg. What is the expected volume of the gas at S.T.P.
Answer:
V₂ = 4.4 L
Explanation:
Given data:
Initial volume = 5.5 L
Initial pressure = 650 mmHg (650/760 =0.86 atm)
Initial temperature = 20 °C (20 +273 = 293 K)
Final temperature = 273 K
Final volume = ?
Final pressure = 1 atm
Solution:
Formula:
P₁V₁/T₁ = P₂V₂/T₂
V₂ = P₁V₁T₂/T₁ P₂
V₂ = 0.86 atm× 5.5 L × 273 K / 293 k × 1 atm
V₂ = 1291.29 atm.K.L / 293 k.atm
V₂ = 4.4 L
A 1.50 mol sample of He occupies a volume of 2.50 L at a pressure of 14.7 atm. What will be the pressure of a 1.50 mol sample of H2 gas under the same conditions? a 7.33atm b 14.7atm c 29.4 atm d 1.00 atm
Answer:
el n = M/m. El nº de moles = m/M
Se utiliza la fórmula general de los gases: P*V = n*R*T
P = 760/760 = 1 atm
V = 0,5 L
n = masa de Cl2/masa molecular = masa de Cl2/70
R = 0,082
T = 273 + 20º C = 293 K
1*0,5 = masa de Cl2/70*0,082*293
0,5/0,082*293 = masa de Cl2/70
0,0208 = masa de Cl2/70
masa de Cl2 = 70*0,0208 = 1,46 g
epilacion:
Suerte
Describe the role of chloroplasts in photosynthesis. (ASAP)
Answer:
Chloroplasts absorb sunlight and use it in conjunction with water and carbon dioxide gas to produce food for the plant. Chloroplasts capture light energy from the sun to produce the free energy stored in ATP and NADPH through a process called photosynthesis.
Explanation:
Which statement is incorrect?
Acids produce H+ ions when ionized.
B. Bases produce OH^ lons when lonized.
C. Bases are found in the pH range of 1-7 on the pH
scale.
Distilled water has a neutral pH of 7.0.
Answer:
C. Bases are found in the pH range of 1-7 on the pH scale.
Explanation:
Acids are less than 7 on the pH scale, so 1-7. Bases are more than 7 on the pH scale, so 7-14. That's why C is incorrect, hope this helps!
Help for chem/physics
Answer:
first and 3rd are ur answers
what step of the scientific method do we decide whether our hypothesis was correct or not
Calculate the density of the rock if its mass is 360 g.
Answer:
12.0 g/mL
Explanation:
From the question given above, the following data were obtained:
Mass of Rock = 360 g
Volume of water = 150 mL
Volume of water + Rock = 180 mL
Density of Rock =?
Next, we shall determine the volume of the rock. This can be obtained as follow:
Volume of water = 150 mL
Volume of water + Rock = 180 mL
Volume of Rock =?
Volume of Rock = (Volume of water + Rock) – (Volume of water)
Volume of Rock = 180 – 150
Volume of Rock = 30 mL
Finally, we shall determine the density of the rock as illustrated below:
Mass of Rock = 360 g
Volume of Rock = 30 mL
Density of Rock =?
Density = mass /volume
Density of Rock = 360 / 30
Density of Rock = 12.0 g/mL
Thus, the density of the rock is 12.0 g/mL
4)
Fluorine and element Z have similar chemical properties. Element Z could have an electron
configuration of
A)
2-2
B)
2-8-1
C)
2-8-8
D)
2-8-18-7
Answer:
D) 2.8.18.7
Explanation:
because it has 7 valence electron that occupied by shells
Which is a chemical property of soda ash?
Explanation:
A chemical property of soda ash is, it is a alkaline compound
A gas has a volume of 6.00 liters at a temperature of 27° C and a pressure of 1,00 atm. What is the volume of the gas, in liters, at a temperature of 327°C and a
pressure of 3.00 atm?
We are given:
P1 = 1 atm P2 = 3 atm
T1 = 300 K T2 = 600 K
V1 = 6 L V2 = v L
Finding the final Volume:
From the ideal gas equation:
PV = nRT
since in the given scenario, the universal gas constant (R) and number of moles(n) are constant
So, for both the cases, the value of n*R will be a constant k
Hence, we can write that:
PV / T = k [where k is a constant]
Since the constant 'k' is the same for both the cases, we can write that:
P1V1 / T1 = P2V2 / T2
replacing the variables
1 * 6 / 300 = 3 * v / 600
1/50 = v / 200
v = 200/50
v = 4 L
Therefore, the volume of the gas at 600K and 3 atm will have a volume of 4 L
What is the charge on an atom after it gains two electrons during the formation of a bond?
One positive charge
Two positive charges
Two negative charges
One negative charge
Answer:
Two Negative Charges
Explanation:
C. Two negative charges
If an atom has an equal number of protons and electrons, its net charge is 0. If it gains an extra electron, it becomes negatively charged and is known as an anion. If it loses an electron, it becomes positively charged and is known as a cation.Given condition: An atom gains two electrons during the formation of a bond.
As we know gaining an electron results in a negative charge and here two electrons being gained.
Therefore, the charge on it after gaining two electrons will be two negative charges.
Thus, the correct option is option C.
Learn more:
brainly.com/question/7722404
By what mechanism does cyclohexanol react when treated in concentrated sulfuric acid/phosphoric acid and what compound results?
Answer:
The mechanism is E1 and the product is cyclohexene
Explanation:
Attached to this answer is an image of the reaction mechanism of the reaction between cyclohexanol and concentrated sulfuric acid/phosphoric acid. The acid (H3O^+) acts as catalyst.
We can see that the first step in the mechanism is the protonation of the -OH group of the alcohol. This is followed by loss of water molecule which is a good leaving group.
The water now acts as a Lewis base by abstracting a proton from the substrate, forming cyclohexene and regenerating the acid catalyst.