URGENT A gas occupies a volume of 2.4 L at 0.14 ATM. What volume will the gas occupy at 0.84 ATM ?
a
0.28 L
b
14 L
c
0.40 L
d
2.5 L
Answer:
c 0.40 L
Explanation:
Calculate by using Boyle's Law P₁V₁=P₂V₂
(0.14atm)(2.4L) = (0.84atm)(V₂)
0.336 atmL = (0.84atm)(V₂)
V₂ = 0.336 atmL/0.84atm
V₂ = 0.4 L
Which statement is TRUE according to the kinetic molecular theory? Which statement is TRUE according to the kinetic molecular theory? A single particle does not move in a straight line. The average kinetic energy of a particle is proportional to the temperature in Kelvin. The size of the particle is large compared to the volume. The collisions of particles with one another is not completely elastic.
Answer:
The average kinetic energy of a particle is proportional to the temperature in Kelvin.
Explanation:
The kinetic molecular theory states that particles of matter are in constant motion and collide frequently with each other as well as with the walls of the container.
The collisions between particles are completely elastic. The kinetic energy of the particles of a body depends on the temperature of the body since temperature is defined as a measure of the average kinetic energy of the particles of a body.
Therefore, the average kinetic energy of a particle is proportional to the temperature in Kelvin.
Four postulates make up the kinetic-molecular theory of gases: A gas is made up of molecules moving randomly all the time. Gas molecules exclusively interact with one another through collisions; they do not apply any other forces. Every gas molecule collision is fully elastic, and all kinetic energy is conserved. Here the correct option is B.
According to the kinetic molecular theory, collisions between gas particles occur in perfect elastic motion and are always in motion. Boyle's and Charles's laws can both be explained by the kinetic molecular theory. Only absolute temperature directly affects a group of gas particles' average kinetic energy.
The collisions between particles are completely elastic. The kinetic energy of the particles of a body depends on the temperature of the body since temperature is defined as a measure of the average kinetic energy of the particles of a body.
Thus the correct option is B.
To know more about kinetic molecular theory, visit;
https://brainly.com/question/30655544
#SPJ6
Aqueous solutions containing approximately 3 percent(w/w) H2O2 are sold in drug stores as a disinfectant. Determination of the actual concentration of H2O2 in a bottle of peroxide solution was done by diluting 1.50 mL to 100 mL with water, acidifying with dilute H2SO4 and titrating with a 0.01411 M KMnO4 solution. 32.17 mL of the permangate solution was needed to reach the end point of the titration. What is the actual molar concentration of the H2O2 solution]
Answer:
0.01804 M KMnO4 Solution.
Explanation:
3 Percent(w/w) H2O2 Are Sold In Drug Stores As A Disinfectant. ... H2O2 In A Bottle Of Peroxide Solution Was Done By Diluting 1.50 ML To 100 ML With Water, Acidifying With Dilute H2SO4 And Titrating With A 0.01804 M KMnO4 Solution.
When P4O10(s) reacts with H2O(l) to form H3PO4(aq) , 453 kJ of energy are evolved for each mole of P4O10(s) that reacts. Write a balanced thermochemical equation for the reaction with an energy term in kJ as part of the equation.
Answer:
P4O10 + 6H2O → 4H3PO4 ΔH = 453 kJ
Explanation:
A thermochemical reaction is one in which the amount of heat gained/evolved is written as part of the reaction equation.
A thermochemical equation helps us to judge whether an equation is endothermic or exothermic. For an endothermic reaction, ΔH is positive while for an exothermic reaction ΔH is negative.
Since, the reaction of one mole of P4O10(s) with H2O(l) to form H3PO4(aq) evolves 453 kJ of energy for each mole of P4O10(s) that reacts. Then we can write;
P4O10 + 6H2O → 4H3PO4 ΔH = 453 kJ
what are the reasons that you cannot see many stars in the city nights?
Answer:
Because of the artificial lights influencing the dark night, turning it into a grey.
What is the value of the equilibrium constant K ?
Answer:
K = 0.0209
Explanation:
K = [tex]\frac{[H_{2}][I_{2}]}{[2HI]^{2}}[/tex]
K = [tex]\frac{[4.35 x 10^{-2} ][2.79 x 10^{-2} ]}{[0.241]^{2} }[/tex]
K = 0.0208958
K = 0.0209
which bond does water atom share
Answer:
Covalent bonds
Explanation:
A water molecule consists of two atoms of hydrogen linked by covalent bonds to the same atom of oxygen. Atoms of oxygen are electronegative and attract the shared electrons in their covalent bonds.
What's the bond between two atoms of hydrogen?
Answer:There is a iin dipole attraction between two hydrogen atom
Explanation:
The same atoms have the ion dipole attraction between them the same atoms repel each other
Question 9 of 10
Which of the following statements are true of nuclear energy and reactors?
Check all that apply.
O A. Nuclear reactors on Earth use fusion reactions to produce energy.
B. Nuclear fission reactions use only a small amount of material to
produce a large amount of energy.
C. Nuclear reactors use controlled reactions.
D. Nuclear fission is done by joining nuclei together into a bigger
nucleus.
Answer:
B. Nuclear fission reactions use only a small amount of material to
produce a large amount of energy.
C. Nuclear reactors use controlled reactions.
Explanation:
Nuclear reactors are devices that contain and control nuclear chain reactions while releasing heat produced from these nuclear chain reactions at a controlled rate.
A nuclear power plant uses the enormous amount of heat that are produced from the nuclear chain reactions occurring in the nuclear reactor to turn water into steam, which then drives turbine generators that generate electricity.
The nuclear chain reactions occurring in the nuclear reactor are fission chain reactions. A nuclear fission reaction is a reaction in which a larger atom is split into two or more smaller atoms when bombarded with energetic neutrons resulting in the release of large amounts of energy and more neutrons. The neutrons released split more atoms of the larger atom into smaller atoms in what is known as a chain reaction. This reaction is controlled by means of moderators. A moderator helps slow down the neutrons produced by fission to sustain the chain reaction.
Statements that are right as regards nuclear energy and reactors are ;
B. Nuclear fission reactions use only a small amount of material to
produce a large amount of energy.
C. Nuclear reactors use controlled reactions.
Nuclear fission can be regarded as splitting of a large atomic nucleus into smaller nuclei, in this case neutron is absorbed into a nucleus. It utilize small material to produce energy.This process is done by the use of nuclear reactor which brings about a controlled reaction.Therefore option B,C, are correct.
Learn more at
https://brainly.com/question/913303?referrer=searchResults
2. What mass of NaOH is contained in 250.0 mL of a 0.400
M sodium hydroxide solution?
Answer:Explanation:
250.ml of a 0.400 divide
A car generates 2552 N and weighs 2250 kg. What is its rate of acceleration
2 m/s ^2
0.88m/s^2
5,742,000m/s^2
1.13m/s^2
Answer:
[tex]a=1.134\frac{m}{s^2}[/tex]
Explanation:
Hello there!
In this case, by considering the physical definition of force in terms of mass and acceleration:
[tex]F=m*a[/tex]
Given the generated force and the involved mass, we can compute the required acceleration as shown below:
[tex]a=\frac{F}{m}\\\\a=\frac{2552N}{114kg}[/tex]
Yet it is necessary to break out Newtons to:
[tex]a=\frac{2552\frac{kg*m}{s^2} }{114kg}\\\\a=1.134\frac{m}{s^2}[/tex]
Best regards!
3. Pepsi puts 355 ml of soda in a can. How many drops is this?
What keeps the Earth orbiting on its current path
in our solar system?
T/F___ At the eutectic composition, an alloy can solidify at a constant temperature.___ For effective dispersion strengthening, the dispersed phase should be needle-like, as opposed to round___ Intermetallic compounds are usually hard and brittle.___ For effective dispersion strengthening, the dispersed phase should be continuous.___ Stoichiometric intermetallic compounds exist overa range of compositions.___ Faster solidification results in smaller interlamellar spacing
Answer:
TRUEFALSETRUEFALSEFALSETRUEExplanation:
At the eutectic composition, an alloy can solidify at a constant temperature : TRUE . this is because at eutectic composition the type of reaction that takes place there is invariant reaction in its thermal equilibrium For effective dispersion strengthening, the dispersed phase should be needle-like, as opposed to round : FALSE. because the rounded shape will not cause a crack. Intermetallic compounds are usually hard and brittle : TRUE. because Intermetallic compounds prevents dislocation movements and this makes them brittle and hardFor the effective dispersion and strengthening, the dispersed phase should be continuous : FALSE. this is because the dispersed precipitate must be small and not continuous Stoichiometric intermetallic compounds exist over a range of compositions : FALSEFaster solidification results in smaller interlamellar spacing : TRUEIf a piece of silver specific heat .2165 j/g °C with a mass of 14.16 g and a temperature of 133.5°C is dropped into 250.0 g of fat 17.20°C what will be the final temperature of the system
Answer:
[tex]T_F=17.56\°C[/tex]
Explanation:
Hello there!
In this case, for this calorimetry problem, it is possible for us to realize that the heat lost by the hot silver is gained by the cold far whose specific heat is 3.94 J/g°c, so we can write:
[tex]-Q_{Ag}=Q_{fat}[/tex]
Which can be written in terms of mass, specific heat and temperature as shown below:
[tex]-m_{Ag}C_{Ag}(T_F-T_{Ag})=m_{fat}C_{fat}(T_F-T_{fat})[/tex]
In such a way, solving for the final temperature, we obtain:
[tex]T_F=\frac{m_{Ag}C_{Ag}T_{Ag}+m_{fat}C_{fat}T_{fat}}{m_{Ag}C_{Ag}+m_{fat}C_{fat}}}[/tex]
Then, we plug in the given data to obtain:
[tex]T_F=\frac{14.16g*0.2165J/g\°C*133.5\°C+250g*3.94J/g\°C*17.20\°C}{14.16g*0.2165J/g\°C+250g*3.94J/g\°C} \\\\T_F=17.56\°C[/tex]
Best regards!
1. (An example of non-point-source pollution is
A. Wastewater from a leaking pipe.
B. Fertilizer runoff from lawns.
C. Oil from a leaking underground tank.
D. Chemicals released from a paper mill
Answer:
i think the answer is c.
Explanation:
How does a tree get energy?
A. It does not need energy
B. It gets energy from the Sun.
C. It eats food in its environment.
If the solubility of salicylic acid is 77.8 g/L of water at 100oC and 1.4 g/L of water at 10oC, a) calculate the minimum amount (in mL) of boiling water necessary to dissolve 2.0 g of impure salicylic acid for recrystallization. b) If the solution is cooled to room temperature and then to 10oC with an ice/water bath, what is the maximum amount of solid salicylic acid isolated after vacuum filtration
Answer:
a. 25.7mL are necessaries.
b. 1.964g of salicylic acid can be isolated.
Explanation:
a. As the solubility of salicylicic acid in boiling water is 77.8g/L, to dissolve 2.0g of salicylic acid are necessaries:
2.0g * (1L / 77.8g) = 0.0257L =
25.7mL are necessariesb. Then, at 10°C the solution just can dissolve 1.4g/L, that is:
0.0257L * (1.4g/L) = 0.036g of salicylic acid are dissolved.
And will precipitate:
2.0g - 0.036g =
1.964g of salicylic acid can be isolatedWhat is the mechanism by which Ozone is formed in the presence of sunshine?
Why do you think there are different stars in each nighttime section of the artifact?
Answer:
The sky looks different in each nighttime section of the artifact because the artifact sections represent different seasons. ... Different constellations are visible on different nights throughout the year because of the earth's orbit. The Earth orbits around the sun. A full orbit is 365 days or one year.
Explanation:
does anyone know how to do this?
Answer:
nah
Explanation:
you do not see any clouds in the sky, which inference could you make about the weather??
Answer:
Explanation:
This indicate that there is a type of pressure or anticyclone that is affecting the area. This means Air would sink down slowly, instead of it rising and cooling.
It happen that Sometimes the clouds heat up and the liquid water will change into vapor. The water droplets present in the clouds will not be as heavy as the surrounding air
I need help with level 15 in covalent bonding in playmada collisions app.
which level are u on now?
In the second step, acetylene, carbon dioxide and water react to form acrylic acid: (g)(g)(g)(g) Write the net chemical equation for the production of acrylic acid from calcium carbide, water and carbon dioxide. Be sure your equation is balanced.
Answer:
6C2H2(g) + 16H2O(g) + 3CO2(g) ------> 6Ca(OH)2(s) + 5CH2CHCO2H(g)
Explanation:
The reaction has the first step as the reaction of calcium carbide with water to yield acetylene and calcium hydroxide as follows;
6CaC2(s) + 12H2O(g) -----> 6C2H2(g) + 6Ca(OH)2(s)
In the second step, acetylene, carbon dioxide and water react to form acrylic acid as follows;
6C2H2(g) + 4H2O(g) + 3CO2(g) ------> 5CH2CHCO2H(g)
The overall reaction equation is as follows;
6C2H2(g) + 16H2O(g) + 3CO2(g) ------> 6Ca(OH)2(s) + 5CH2CHCO2H(g)
How many significant figures are in the number 420,000 mi?
Answer:
2
Explanation:
zeros are not considered sig figs
A 10.0 mL sample of HNO3 was diluted to a
volume of 100.00 mL. Then 25 mL of that
diluted solution was needed to neutralize 50.0
mL of 0.60 M KOH. What was the
concentration of the original nitric acid?
1.2 M
12 M
none of these
O 0.12 M
0.0012M
Answer:
12 M
Explanation:
The reaction between HNO₃ and KOH is:
HNO₃ + KOH → KNO₃ + H₂OFirst we calculate how many KOH moles reacted with the diluted HNO₃ sample, using the given volume and concentration:
50.0 mL * 0.60 M = 30 mmol KOHAs 1 KOH mol reacts with 1 HNO₃ mol, in 25 mL of the diluted HNO₃ solution there are 30 HNO₃ mmoles.
With that information in mind we can calculate the HNO₃ concentration in the diluted solution:
30 mmol HNO₃ / 25 mL = 1.2 MFinally we can use the C₁V₁=C₂V₂ formula to calculate the concentration of the original solution:
C₁ * 10.0 mL = 1.2 M * 100.00 mLC₁ = 12 MWhat are the 5 properties of muscles
Using current genetic engineering techniques can provide potential benefits for parents, including
A.
eliminating all genetic diseases from their child.
B.
conceiving a child who is a bone marrow match to a living child.
C.
cloning a parent to produce a child identical to the parent.
D.
producing only children with blonde hair.
Answer:
B. Conceiving a child who is a bone marrow match to a living child.
Explanation:
I don't know it just is.
what is heat of reaction
Answer:
Explanation:
The heat of reaction is the energy that is released or absorbed when chemicals are transformed in a chemical reaction. ... The heat of reaction or reaction enthalpy is typically expressed as molar enthalpy in kJ/mol or as specific enthalpy in kJ/kg or kJ/L.
Answer:
The heat of reaction is the energy that is released or absorbed when chemicals are transformed in a chemical reaction. ... The heat of reaction or reaction enthalpy is typically expressed as molar enthalpy in kJ/mol or as specific enthalpy in kJ/kg or kJ/L.
Explanation:
The overall redox equation for the voltaic cell can be written as ^^^. What is being reduced in this forward reaction?
Answer:
Cu⁺² is being reduced in that reaction.
Explanation:
Zn(s) + Cu⁺²(aq) → Zn⁺²(aq) + Cu(s)When a substance is reduced, its oxidation number is reduced -changing to a lower value than original-.
Cu⁺² turned into Cu. Meaning that the oxidation number changed from +2 to 0.
Thus, Cu⁺² is being reduced in that reaction.