Answer: D all of the above
Explanation: Coal, Graphite, Diamond are all allotropes of Carbon. Hope this helps :)
An airplane traveling 919 m above the ocean at 505 m/s is to drop a case of twinkies to the victims below. How much time before being directly overhead should the box be dropped? What is the horizontal distance between the plane and the victims when the box is dropped?
Answer:
a. 13.7 s b. 6913.5 m
Explanation:
a. How much time before being directly overhead should the box be dropped?
Since the box falls under gravity we use the equation
y = ut - 1/2gt² where y = height of plane above ocean = 919 m, u = initial vertical velocity of airplane = 0 m/s, g = acceleration due to gravity = -9.8 m/s² and t = time it takes the airplane to be directly overhead.
So,
y = ut - 1/2gt²
y = 0 × t - 1/2gt²
y = 0 - 1/2gt²
y = - 1/2gt²
t² = -2y/g
t = √(-2y/g)
So, t = √(-2 × 919 m/-9.8 m/s²)
t = √(-1838 m/-9.8 m/s²)
t = √(187.551 m²/s²)
t = 13.69 s
t ≅ 13.7 s
So, the box should be dropped 13.69 s before being directly overhead.
b. What is the horizontal distance between the plane and the victims when the box is dropped?
The horizontal distance x between plane and victims, x = speed of plane × time it takes for box to drop = 505 m/s × 13.69 s = 6913.45 m ≅ 6913.5 m
The graph below represents the motion of four cars, labeled W, X, Y, and Z.
w
Distance
Time
Which car traveled at a constant speed throughout its motion?
O AW
ОВ. Х
О O c.ru
OD. Z
Answer:
Answer is A
Explanation:
As we know , for constant velocity we get a straight line.
The formula for this problem is s = vt which is similar to a straight line formula like y = mx + c.
If we put here c = 0 we get the formula for distance and velocity.
So the answer is A.
A skateboarder traveling at 7.0 meters per second rolls to a stop at the top of a ramp in 3.0 seconds. What is the skateboarder’s acceleration?
*Please only answer if you know - and ABSOLUTLEY NOOOOOOOO LINKS*
Thank you! :)
Answer:
-2.33 m/s²
Explanation:
The computation of the skateboarder’s acceleration is shown below;
Acceleration means the change in velocity per unit with respect to time.
In the given case, the initial velocity is 7 m/s.
As in the question it is mentioned that it comes to a stop, so the final velocity would be zero.
And, The time elapsed is 3 seconds.
Now the following equation should be used
a = (v,final - v,initial) ÷ t
= (0 - 7)/3
= -2.33 m/s²
The greater the mass of an object being moved, the greater amount of force needed to move the object,
Answer:
It's often called the law of inertia. Acceleration is produced when a force acts on a mass. The greater the mass (of the object being accelerated) the greater the amount of force needed (to accelerate the object). ... A more massive object has a greater tendency to resist changes in its state of motion.
Explanation:
Answer: It's often called the law of inertia. Acceleration is produced when a force acts on a mass. The greater the mass (of the object being accelerated) the greater the amount of force needed (to accelerate the object). ... A more massive object has a greater tendency to resist changes in its state of motion.
HOPE THIS HELPS
If the Sun, Earth, and Moon are lined up as shown, the Earth would have______.
A. Spring tides where there is almost no difference in the tides
B. Spring tides, which is where there are very high tides and very low tides
C. Neap tides where there is almost no difference in the tides.
D. Neap tides, which is where there are very high tides and very low tides
Answer:
The answer is B. Spring tides, which are where there are very high tides and very low tides.
Explanation:
Spring tides occur when the sun and the moon are in alignment with Earth.
At the time of a new moon or full moon when the sun, earth, and the moon are in full alignment the solar tide affects the lunar tide leading to the creation of extra-high high tides, and very low, low tides. The basic reasons for this phenomenon are the gravity of the sun and the moon is acting on the earth oceanPlease thank my answer and vote. (Maybe mark brainliest please)
The Brazilian rain forest is an area with significant biodiversity.
As the rain forest is replaced with agricultural land, it is
reasonable to predict a reduction in -
consumption of solar energy.
sustainability over time.
precipitation levels.
average daily temperature.
Answer:
sustainability over time.
Explanation:
The largest Brazilian rainforest is the Amazon rainforest, which is the largest rainforest in the world and occupies 42% of the Brazilian territory. The forest is composed of a rich environmental diversity, constituted by many species of fauna and flora and diverse river resources.
However, there is a growing transformation in the Amazon rainforest caused by organizational exploitation that uses its resources to transform the forest area into agricultural land and pastures for livestock. This problem will cause a reduction in sustainability over time, which will cause serious negative effects on the environment, such as a reduction in biodiversity and an increase in the emission of gases responsible for the greenhouse effect on the planet.
Answer:
Bb
Explanation:
A container of carbon dioxide has a volume of 315 cm³ at a temperature of 25°C if the pressure remains constant what is the volume of 54°C
Answer:
680.4
Explanation:
the formula is V1 over T1 is equals (=) to V2 over T2 .
and we have been given that
V1 represents 315
T1 represents 25°c
V2 is unknown and what we're finding
T2 represents 54°c
so 315×54 all over 25 ...gives you 680.4
The total amount of energy ____
stays the same.
A. Sometimes
B. Rarely
C. Never
D. Always
Answer:
D
Explanation:
In physics and chemistry, the law of conservation of energy states that the total energy of an isolated system remains constant; it is said to be conserved over time.
The Earth has a gravitational pull on a single nitrogen molecule (N2) in the air. In comparison, the gravitational pull of the nitrogen molecule on the Earth is:
1.) Weaker, but, no zero.
2.) Zero.
3.) The same size.
4.) Stronger.
What force is keeping the Earth in orbit around the Sun? * HELP FAST PLEASE.
1 point
A Centripetal Force due to gravity.
B Inertia due to gravity.
C Friction due to gravity.
D Magnetic Force due to gravity.
centripetal force acts *
1 point
A in the same direction as tangential speed.
B perpendicular to tangential speed but in the same plane.
C in the direction opposite tangential speed.
D perpendicular to the plane of circular motion.
Answer:
magnetic force due to gravity
Explanation:
nowno that is because that's what the geography teacher taught us back in don't remember but it's true
What's an conductor?
A.material that electric current passes easily through
B.material that doesn't conduct electrical current
C.Other:
Answer:
A. Material that electric current passes easily through.
Explanation:
The gravitational field strength on the moon is 1.63 N/kg. If a rock on the moon weighs 2000N, how
much does the same rock weigh on the earth?
Answer:
12000N
Explanation:
gravity on earth is six times one on the moon
A runner starts at position A. He runs 40 m North, 10 m East and 40 m
South. Where does he end up in relation the starting position?
a. 40 m North
b. 40 m South
c. 10 m East
d. Position
Question 16 (1 point)
Light travels through a material at a speed of 4.3 x 108 m/s. What is the index of
refraction for the material?
Your Answer:
Answer
units
Answer:
η = 0.7
Explanation:
The refractive index of the material can be calculated by using the following formula:
[tex]\eta = \frac{c}{v}\\[/tex]
where,
η = refractive index of the material = ?
c = speedof light in vaccuum = 3 x 10⁸ m/s
v = speed of light in this material = 4.3 x 10⁸ m/s
Therefore,
[tex]\eta = \frac{3\ x\ 10^8\ m/s}{4.3\ x\ 10^8\ m/s}[/tex]
η = 0.7
How much can a 70kg skatebaors accelerate if you push it with a force of 360N?
It would not move. It wouldn't move because its 7 0 K G my friend.
i need to figure out A but i’m not sure how
Answer:
cc
Explanation:
An elevator lifts a total mass of 1800 kg, a distance of 60 m in 60 s. How much power does the elevator generate?
Answer:
17640
Explanation:
Power = workdone/time
Power = (force x displacement)/time
Power = (mg x 60)/60
Power = (1800 x 9.8 x 60)/60
=> power = 17640 watt
If there is a ball sitting on top of a hill with 100J of GPE. How much KE should there be at the bottom of the hill if there is no friction?
A bug on a turntable will make more turns per minute if it is located near the center of rotation. True or false?
Please help me this is timed!
the mechanical energy of a 2kg body is 35J and its potential energy is 10J calculate speed energy
Answer:
20
Explanation:
20 multiplied by 2
hope i hv answered ur question
The fastest crossing of the Atlantic Ocean by an ocean
linger was made in July of 1952. The ship, the S.S. United States, traveled 4727 km east by northeast in 3 days, 15 hours, and 20 minutes. Assume that the ship had traveled the same speed, but directly east. What would the velocity of the S.S United States be in km/h?
this is not a question its a thanks zerofrancisco
Answer:
⠀⠀⠀⠀⠀
Explanation:
Answer:
the guy above me has great humor
Explanation:
QUESTION 3
A 10 kg cement block is pulled across the floor with a force of 50 N at an angle of 30° with the
horizontal The block accelerates at 1,5 m s?
30°
10 kg
(2)
31
Define the term normal force
3.2
Draw a FORCE DIAGRAM showing ALL the forces acting on the object.
3.3
Calculate the magnitude of the
(3)
3.3.1 Normal force
(5)
3.3.2 Frictional force which acts on the crate
(4)
3.3.3 Coefficient of kinetic friction
[18]
fruittttstcwvwvw s https://media.tenor.co/imag
︶
A 150 g pinball rolls towards a springloaded launching rod with a velocity of 2.0 m/s to the west. The launching rod strikes the pinball and causes it to move in the opposite direction with a velocity of 10.0 m/s. What impulse was delivered to the pinball by the launcher?
Answer:
I = 1.8 N s, it is directed towards the right
Explanation:
For this exercise we use the relationship between momentum and moment
I = Δp
F t = p_f - p₀
in this case the initial velocity is v₀ = - 2,0 m / s and final velocity v_f = 10,0 m / s, we assume the positive right direction
I = m (v_f - v₀)
let's calculate
I = 0.150 (10.0 - (-2.0))
I = 0.150 (10 + 2)
I = 1.8 N s
as the impulse is positive it is directed towards the right
Which describes the changes in visible light moving from red to violet?
Which is a characteristic of the image formed by an
object between 2F and F?
O The image is virtual.
O The image is bigger than the object.
O The image is inverted,
O
When the object is placed between 2F and F in front of a concave lens characteristic of the image formed by an object is virtual, therefore the correct option first option that the image is virtual.
What is refraction?
It is the phenomenon of bending of light when it travels from one medium to another medium. The bending towards or away from the normal depends upon the medium of travel as well as the refractive index of the material.
Snell's law,
n₁sin(θ₁) = n₂sin(θ₂)
Where n is the refractive index and θ represents angles
A concave lens is used to diverge the incident rays of light falling on it. because of this, the image formed by the concave lens is virtual.
These concave lenses are used in several days to day life applications such as cameras, telescopes, and eye glasses.
When the object is placed between 2F and F in front of a concave lens the characteristic of the image formed by an object is virtual. therefore the correct option first option is that the image is virtual.
Learn more about refraction from here
brainly.com/question/13088981
#SPJ5
Answer:
the image is virtual
Explanation:
I got it right
PLZZZZZZ HELP 50 POINTS Directions
Now that the lab is complete, it is time to write your lab report. The purpose of this guide is to help you write a clear and concise report that summarizes the lab you have just completed.
The lab report is composed of two sections:
Section I: Overview of Investigation
Provide background information.
Summarize the procedure.
Section II: Observations and Conclusions
Include any charts, tables, or drawings required by your teacher.
Include answers to follow-up questions.
Explain how the investigation could be improved.
To help you write your lab report, you will first answer the four questions listed below based on the lab that you have just completed. Then you will use the answers to these questions to write the lab report that you will turn in to your teacher.
You can upload your completed report with the upload tool in formats such as , Microsoft Word, or PDF. Alternatively, your teacher may ask you to turn in a paper copy of your report or use a web-based writing tool.
Questions
Section I: Overview of Lab
What is the purpose of the lab?
What procedure did you use to complete the lab?
Outline the steps of the procedure in full sentences.
Section II: Observations and Conclusions
What charts, tables, or drawings would clearly show what you have learned in this lab?
Each chart, table, or drawing should have the following items:
An appropriate title
Appropriate labels
If you could repeat the lab and make it better, what would you do differently and why?
There are always ways that labs can be improved. Now that you are a veteran of this lab and have experience with the procedure, offer some advice to the next scientist about what you suggest and why. Your answer should be at least two to three sentences in length.
Writing the Lab Report
Now you will use your answers from the four questions above to write your lab report. Follow the directions below.
Section I: Overview of Lab
Use your answers from questions 1 and 2 (above) as the basis for the first section of your lab report. This section provides your reader with background information about why you conducted this lab and how it was completed. It should be one to two paragraphs in length.
Section II: Observations and Conclusions
Use your answers from questions 3 and 4 (above) as the basis for the second section of your lab report. This section provides your reader with charts, tables, or drawings from the lab. You also need to incorporate your answers to the follow-up questions (from the Student Guide) in your conclusions.
Overall
When complete, the lab report should be read as a coherent whole. Make sure you connect different pieces with relevant transitions. Review for proper grammar, spelling, punctuation, formatting, and other conventions of organization and good writing.
Answer:
60-34+56×22
Explanation:
that's cuz imma teacher THOY!!!!!!
Answer:
60-34+56×22
Explanation:
Which of the following correctly describes the relationship between current and voltage as the voltage of a battery increases. Remember that Ohm's Law
states: I = x
As voltage increases, current decreases because current and voltage are inversely proportional.
o As voltage increases, current decreases because current and voltage are directly proportional
As voltage increases, current increases because current and voltage are directly proportional
Answer:_COC1\/2+_H\/2O>_HC1+CO\/2
Explanation:
Need help asap
In which of these can convection not occur
A. Gases
B.solids
C.liquids
D.fluids
I believe the answer would be B.solids.
Explanation:
Hope this helped!
In solids these can convection not occur and convection can occur in both liquids and gases, as they are both considered fluids. Thus, option B is correct.
However, convection cannot occur in solids, as the particles in solids are generally fixed in position and do not have the freedom to move and transfer heat through bulk motion as in convection.
A solid is one of the three fundamental states of matter, along with liquids and gases. It is characterized by having a definite shape and volume. Solids are composed of tightly packed particles, such as atoms, molecules, or ions, that are held together by strong intermolecular forces.
These particles vibrate in fixed positions but do not have the ability to move freely throughout the substance. As a result, solids maintain their shape and volume under normal conditions and exhibit relatively low compressibility compared to gases and liquids. Examples of solids include metals, rocks, wood, plastics, and ice.
Learn more about solid on:
https://brainly.com/question/32439212
#SPJ2
) A spring with a spring constant of 2.1N/m is stretched 0.2m. What force is produced by
the spring?
Answer:
Force = 0.42 Newton
Explanation:
Given the following data;
Spring constant, k = 2.1
Extension, e = 0.2m
To find the force, we would use the formula below;
Force = spring constant * extension
Force = 2.1 * 0.2
Force = 0.42 Newton