In the video your blood is compared to a __________________ that delivers oxygen to your body and picks up CO2 to be released out when you breath.

Answer:

λ = 5.773 x 10⁻⁷ m = 577.3 nm

Explanation:

In order to solve this problem we will use the grating equation:

mλ = d Sin θ

where,

m = order = 3

λ = wavelength of light = ?

d = slit separation = 2 μm = 2 x 10⁻⁶ m

θ = angle = 60°

Therefore,

(3)λ = (2 x 10⁻⁶ m)Sin 60°

λ = 1.732 x 10⁻⁶ m/3

λ = 5.773 x 10⁻⁷ m = 577.3 nm

Answer:

Option A

Explanation:

Ast the force is equal and the diayance is equal the beam is also balanced

Answer:

A) all substance conduct electricity

Answer:

F = - 3.56*10⁵ N

Explanation:

To attempt this question, we use the formula for the relationship between momentum and the amount of movement.

I = F t = Δp

Next, we try to find the time that the average speed in the contact is constant (v = 600m / s), so we say

v = d / t

t = d / v

Given that

m = 26 g = 26 10⁻³ kg

d = 50 mm = 50 10⁻³ m

t = d/v

t = 50 10⁻³ / 600

t = 8.33 10⁻⁵ s

F t = m v - m v₀

This is so, because the bullet bounces the speed sign after the crash is negative

F = m (v-vo) / t

F = 26*10⁻³ (-500 - 640) / 8.33*10⁻⁵

F = - 3.56*10⁵ N

The negative sign is as a result of the force exerted against the bullet

Answer:

6.56km

Explanation:

Given parameters:

Speed  = 11.5km/hr

Time  = 2060s

Unknown:

Distance covered  = ?

Solution:

Speed is distance divided by the time taken.

   Speed  = [tex]\frac{distance}{time}[/tex]

   Distance  = Speed x time

Let us convert the seconds to hours;

      3600s  = 1hr

      2060s = [tex]\frac{2060}{3600}[/tex]   = 0.57hr

Now

 Distance  = 11.5km/hr x 0.57hr  = 6.56km

Answer:

This is a way of measuring how much gravity there is. The formula is: weight/mass = gravitational field strength.

Gravitational field strength = Weight/mass unit is N/kg

Weight = mass x gravitational field strength unit is N

On Earth the gravitational field strength is 10 N/kg. Other planets have different gravitational field strengths. The Moon has a gravitational field strength of 1.6 N/kg. You might have seen films of astronauts leaping high on the moon.

Here on Earth, if I jump I am pulled back to ground by gravity. What is my weight? My mass is 80kg and if we multiply by gravitational field strength (10N/kg) - my weight is 800N. Now if I go to the moon, my mass will be the same, 80kg. We multiply that by the moon's gravitational field strength, which is 1.6 N/ kg. That means my weight on the moon is 128N. So I have different weights on the Earth and on the Moon. That's why astronauts can jump high into the air on the moon - they're lighter up there.

Jupiter is a very large planet with strong gravitational field strength of 25 N/ kg. My body is 80kg. If I go to Jupiter my weight is going to be 25 x 80 = 2,000 N. That means I wouldn't be able to get off the ground or stand up straight! I would probably be lying down all the time there. So weight varies depending on which planet you are on. You can find out more yourself by looking up tables of weight on different planets.

Answer:

 x = 10.75 m

Explanation:

For this problem we will solve it in two parts, the first using energy and the second with kinematics

Let's use the energy work relationship to find the velocity of the block as it exits the ramp

       W = [tex]Em_{f}[/tex] - Em₀

Starting point. Higher

       Em₀ = U = m g h

the height from the edge of the ramp of the graph has a value

        h = 9-3 = 6 m

Final point. At the bottom of the ramp

       Em_{f} = K = ½ m v²

Friction force work

      W = - fr  d

The friction force has the formula

      fr = μ N

On the ramp, we can use Newton's second law

         N - W cos θ = 0

         N = W cos θ

where the angle is obtained from the graph

         tan θ = (9-3) / (0.5-4) = -6 / 3.5

         θ = tan⁻¹ (-1,714)

         θ = -59.7º

the distance d is

         d = √ (Δx² + Δy²)

         d = √ [(0.5-4)² + (9-3)²]

         d = 6.95 m

for which the work is

       W = - μ mg cos 59.7 d

we substitute

        W = Em_{f} -Em₀

        - μ mg cos 59.7 d = ½ m v² - m g h

In the graph o text the value of the friction coefficient is not observed, suppose that it is μvery = 0.2

        - μ g cos 59.7 d = ½ v² - g h

         v² = 2g (h - very d coss 59.7)

let's calculate

         v² = 2 9.8 (6 - 0.2 6.95 cos 59.7)

         v = √ 103.8546

         v = 10.19 m / s

in the same direction as the ramp

in the second part we use projectile launch kinematics

let's look for the components of velocity

         v₀ₓ = vo cos -59.7

         [tex]v_{oy}[/tex] = vo sin (-59,7)

         v₀ₓ = 10.19 cos (-59.7) = 5.14 m / s

         v_{oy} = 10.19 if (-59.7) = -8.798 m / s

Let's find the time to get to the floor (y = o)

          y = y₀ + v_{oy} t - ½ g t²

to de groph y₀=3 m

          0 = 3 - 8.798 t - ½ 9.8 t²

          t² - 1.796 t - 0.612 = 0

we solve the quadratic equation

          t = [1.796 ±√(1.796² + 4 0.612)] / 2

          t = [1,795 ± 2,382] / 2

          t₁ = 2.09 s

          t₂ = -0.29 s

since time must be a positive quantity the correct value is t = 2.09 s

we calculate the horizontal displacement

          x = v₀ₓ t

          x = 5.14 2.09

          x = 10.75 m

The motion of the box, after it exits the incline is the motion and trajectory

of a projectile.

Horizontal distance from the right-hand edge of the incline to the point of

contact with the floor is approximately 1.24613 m.

Reasons:

Mass of the block,  m = 3.5 kg

Coefficient of kinetic friction, μ = 1.2

Location of the = 0.5 m from the origin

Required:

Horizontal distance between the block's point of contact with the floor and

the bottom right-hand edge of the incline.

Solution:

Let θ represent the angle the incline make with the horizontal.

The normal reaction of the incline on the block, [tex]F_N[/tex] = m·g·cos(θ)

Work done on friction = [tex]F_N[/tex]×μ×Length of the incline, L

Rise of the incline = 10 - 3 = 7

Run of the incline = 4

L = √(6.125² + 3.5²) = [tex]\dfrac{7 \times \sqrt{65} }{8}[/tex]

Let ΔP.E.₁  represent the potential energy transferred to kinetic energy

and work along the incline, we have;

Energy of the block at the bottom of the incline, M.E.₂, is found as follows;

K.E.₂ = mgh - m·g·μ·cos(θ)·L

[tex]K.E. =\frac{1}{2} \times 3.5 \times v^2 = 3.5 \times 9.81 \times 6.125 - 3.5 \times 9.81 \times 1.2 \times \dfrac{4}{\sqrt{65} } \times \dfrac{7 \times \sqrt{65} }{8}[/tex]

v ≈ 6.1456 m/s

The vertical component of the velocity is therefore;

[tex]v_y = v \cdot sin(\theta)[/tex]

[tex]v_y = 6.1456 \times \dfrac{7}{\sqrt{65} } \approx 5.33588[/tex]

From the equation, h = u·t + 0.5·g·t² derived from Newton's Laws of motion, we have;

ΔP.E.₁ = 3.5×9.81×7

3 = 5.33588·t + 0.5×9.81·t²

Factorizing, the above quadratic equation, we get;

The time it takes the block to reach the floor, t ≈ 0.40869 seconds

Horizontal component of the velocity is [tex]v_x \approx 6.1456 \times \dfrac{4}{\sqrt{65} } \approx 3.04908[/tex]

The horizontal distance, x = vₓ × t

∴ x = 3.04908 × 0.40869 ≈ 1.08194

Horizontal distance from the right-hand edge of the incline to the point of

contact with the floor, x ≈ 1.24613 m.

Learn more here:

https://brainly.com/question/24888457

Answer: Titanium (Ti)

Explanation:

First, each element has a unique atomic number Z, that is equal to the number of protons in the nucleus.

The halogen in period 3 is chlorine (Ch)

Chlorine's atomic number is Z = 17, this means that it has 17 protons.

Now we want to find a transition metal that has 5 more protons, then this transition metal has Z = 17 + 5 = 22

Now we can look at the periodic table and find the element with Z = 22, and if this is in the d-block, then this will be a transition metal.

The element with Z = 22 is titanium (Ti)

Answer:

B I believe

Explanation:

Answer:

Weightlessness

Explanation:

When the elevator is in free fall, this can only occur when the cord of the elevator breaks.

The acceleration of the elevator will be equal to the acceleration due to gravity. That is:

a = g

Then, the body will experience what we called WEIGHTLESSNESS

Where the normal reaction N of the person will tend to zero. That is

N = 0

The value of FN < 0 because the person inside the lift will experience weightlessness.

Answer:

A. linear

Explanation:

because they are going in a straight line

Answer:

2872.8 N

Explanation:

We have the following information

m =n72kg

Δy = 18m

t = 0.95s.

From here we use the equation

Δy=1/2at2 in order to solve for the acceleration.

So a

=( 2x 18m)/(0.95s²)

= 36/0.9025

= 39.9m/s2.

From there we use the equation

F = ma

F=(72kg) x (39.9)

= 2872.8N.

2872.8N is the average net force exerted on him in the barrel of the cannon.

Thank you!

Answer:

a) The potential energy of the system is 1/9 of the total mechanical energy, when [tex]x= \frac{1}{3}\cdot A[/tex].

b) The fraction of the total mechanical energy that is kinetic if the displacement is 1/2 the amplitude is 1/2.

c) The maximum kinetic energy is increased by a factor of 9.

Explanation:

a) From Mechanical Physics, we remember that the mechanical energy of mass-spring system ([tex]E[/tex]), measured in joules, is the sum of the translational kinetic energy ([tex]K[/tex]), measured in joules, and elastic potential energy ([tex]U[/tex]), measured in joules. That is:

[tex]E = K + U[/tex] (1)

By definitions of translational kinetic energy and elastic potential energy, we have the following expressions:

[tex]K = \frac{1}{2}\cdot m \cdot v^{2}[/tex] (2)

[tex]U = \frac{1}{2}\cdot k\cdot x^{2}[/tex] (3)

Where:

[tex]m[/tex] - Mass, measured in kilograms.

[tex]v[/tex] - Velocity of the mass, measured in meters per second.

[tex]k[/tex] - Spring constant, measured in newtons per meter.

[tex]x[/tex] - Elongation of the spring, measured in meters.

If we know that [tex]U = \frac{1}{9}\cdot E[/tex], [tex]k = k[/tex] and [tex]E = \frac{1}{2}\cdot k \cdot A^{2}[/tex], then:

[tex]\frac{1}{18}\cdot k\cdot A^{2} = \frac{1}{2}\cdot k\cdot x^{2}[/tex]

[tex]\frac{1}{9}\cdot A^{2} = x^{2}[/tex]

[tex]x= \frac{1}{3}\cdot A[/tex]

The potential energy of the system is 1/9 of the total mechanical energy, when [tex]x= \frac{1}{3}\cdot A[/tex].

b) If we know that [tex]k = k[/tex], [tex]x = \frac{1}{2}\cdot A[/tex] and [tex]E = \frac{1}{2}\cdot k \cdot A^{2}[/tex], then the equation of energy conservation associated with the system is:

[tex]\frac{1}{2}\cdot k\cdot A^{2} = \frac{1}{4}\cdot k\cdot A^{2}+K[/tex]

[tex]K = \frac{1}{4}\cdot k\cdot A^{2}[/tex]

The fraction of the total mechanical energy that is kinetic if the displacement is 1/2 the amplitude is 1/2.

c) From the Energy Conservation equation associated with the system, we know that increasing the amplitude by a factor of 3 represents an increase in the elastic potential energy by a factor of 9. Then, the maximum kinetic energy is increased by a factor of 9.

Answer:

The ratio is  [tex]\frac{B_1}{B_2} = 1.265[/tex]

Explanation:

From the question we are told that

   The density of fresh water is  [tex]\rho__{f}} = 998 \ kg/m^3[/tex]

     The density of ethanol is  [tex]\rho_{e} = 789 \ kg /m^3[/tex]

Generally speed of a wave in a substance is mathematically represented as

    [tex]v = \sqrt{\frac{B}{\rho} }[/tex]

Here B is the adiabatic bulk modulus of the substance  while [tex]\rho[/tex]  is the density of the substance

So at constant wave speed

     [tex]\sqrt{\frac{B_1}{\rho_1} } = \sqrt{\frac{B_2}{\rho_2} }[/tex]

=>   [tex]\frac{B_1}{\rho_1} = \frac{B_2}{\rho_2}[/tex]

=>   [tex]B_1 \rho_2 = B_2\rho_1[/tex]    

=>  [tex]\frac{B_1}{B_2} = \frac{\rho_1}{\rho_2}[/tex]

Here  [tex]\rho_1 =\rho__{f}} = 998 \ kg/m^3[/tex]   and  [tex]\rho_2 = \rho_{e} = 789 \ kg /m^3[/tex]

So

  =>  [tex]\frac{B_1}{B_2} = \frac{998}{789}[/tex]    

  =>  [tex]\frac{B_1}{B_2} = 1.265[/tex]    

Answer:

Explanation:

The mass of the object can be found by using the formula

[tex]m = \frac{f}{a} \\ [/tex]

f is the force

a is the acceleration

From the question we have

[tex]m = \frac{1200}{8} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

(a) the change in length of the silk is 0.001585 cm

(b) the maximum weight that a single thread can support is 17.67 N

Explanation:

Given;

mass of the spider, m = 0.50 g = 0.5 x 10⁻³ kg

length of the silk, L = 12 mm = 0.012 m

diameter of the silk, d = 0.15 mm

radius of the silk, r = d / 2 = 0.075 mm = 0.075 x 10⁻³ m

The cross sectional area of the silk;

A = πr² = π(0.075 x 10⁻³)²

A = 1.767 x 10⁻⁸ m²

The Young's modulus of elasticity of spider-silk is given by;

2.1 Gpa = 2.1 x 10⁹ N/m²

(a)

Apply  Young's modulus of elasticity equation to determine the change in length of the silk;

[tex]E = \frac{FL}{Ax} = \frac{F_gL}{Ax}\\\\x = \frac{F_gL}{AE}\\\\x = \frac{(0.5*10^{-3}*9.8)(0.12)}{(2.1*10^9)(1.767*10^{-8})}\\\\x = 1.585*10^{-5} \ m\\\\x = 0.01585 \ mm[/tex]

[tex]x = 0.001585 \ cm[/tex]

(b)

the maximum weight that a single thread can support is given by;

[tex]T_{tensile \ strength} = \frac{F_{max}}{A}[/tex]

The tensile strength of spider-silk is given by 1 Gpa = 1 x 10⁹ N/m²

[tex]F_{max} = T_{tensile \ strength}*A\\\\F_{max} = (1*10^9)(1.767*10^{-8})\\\\F_{max} = 17.67 \ N[/tex]

Answer:

However, those astronauts would experience a second spectacle: A solar eclipse caused by the Earth – the Sun disappearing behind the dark disc of the Earth. When Earth inhabitants witness a lunar eclipse, Moon inhabitants would, simultaneously be witnessing a solar eclipse.

Answer:

200 meters per minute

Explanation:

You run the 1600 meters in a total of 8 minutes, so the average speed if 200 meters per minute.

Answer:

Two ways to determine ones muscular strength is to either lift the heaviest weight possible or by doing one repetition. The advantages these two methods is that it is easy to determine and does not require calculations or estimating.

Explanation:

Answer:

Two ways to determine ones muscular strength is to either lift the heaviest weight possible or by doing one repetition. The advantages these two methods is that it is easy to determine and does not require calculations or estimating.

Explanation:

Answer:

box 1 has larger mass than box 2  (which agrees with the first answer option given.

Explanation:

We need to consider the linear momentum of the boxes immediately before and after they crash.

Recall that momentum is defined as mass times velocity.

So for before the collision, the linear momentum of the system of two boxes is:

m1 * 4km/h  - m2 * 8km/h

with m1 representing mass "1" on the left, and m2 representing mass 2 on the right.

Notice the sign of the linear momentum (one positive (moving towards the right) and the other one negative (moving towards the left)

For after the collision, we have or the linear momentum of the system:

- m1 * 2km/h - m2 * 1km/h

Then, since the linear momentum is conserved in the collision, we make the  initial momentum equal the final and study the mass relationship between m1 and m2:

4 m1 - 8 m2 = - 2 m1 - m2

combining like terms for each mas on one side and another of the equal sign, we get;

4 m1 + 2 m1 = 8 m2 - m2

6 m1 = 7 m2

therefore m1 = (7/6) m2

which (since 7/6 is a number larger than one) tells us that m1 is larger than m2 by a factor of 7/6

Therefore, the first answer option is the correct answer.

Answer:

Searching in google I found the total mass and the radius of the ball (m = 1.5 kg and r = 10 cm) which are needed to solve the problem!  

The ball rotates 6.78 revolutions.

Explanation:

Searching in google I found the total mass and the radius of the ball (m = 1.5 kg and r = 10 cm) which are needed to solve the problem!        

At the bottom the ball has the following angular speed:

[tex] \omega_{f} = \frac{v_{f}}{r} = \frac{4.9 m/s}{0.10 m} = 49 rad/s [/tex]

Now, we need to find the distance traveled by the ball (L) by using θ=28° and h(height) = 2 m:

[tex] sin(\theta) = \frac{h}{L} \rightarrow L = \frac{h}{sin(\theta)} = \frac{2 m}{sin(28)} = 4.26 m [/tex]

To find the revolutions we need the time, which can be found using the following equation:                

[tex] v_{f} = v_{0} + at [/tex]  

[tex] t = \frac{v_{f} - v_{0}}{a} [/tex] (1)

So first, we need to find the acceleration:

[tex] v_{f}^{2} = v_{0}^{2} + 2aL \rightarrow a = \frac{v_{f}^{2} - v_{0}^{2}}{2L} [/tex]    (2)  

By entering equation (2) into (1) we have:

[tex] t = \frac{v_{f} - v_{0}}{\frac{v_{f}^{2} - v_{0}^{2}}{2L}} [/tex]

Since it starts from rest (v₀ = 0):  

[tex] t = \frac{2L}{v_{f}} = \frac{2*4.26 m}{4.9 m/s} = 1.74 s [/tex]

Finally, we can find the revolutions:  

[tex] \theta_{f} = \frac{1}{2} \omega_{f}*t = \frac{1}{2}*49 rad/s*1.74 s = 42.63 rad*\frac{1 rev}{2\pi rad} = 6.78 rev [/tex]

Therefore, the ball rotates 6.78 revolutions.

I hope it helps you!                                                                                                                                                                                          

Answer:

C. 4.3 seconds

Explanation:

B 0.56 s is the time period of a twirlers baton.

Centripetal acceleration is defined as the property of the motion of an object which traversing a circular path.

Any object that is moving in a circle and has an acceleration vector pointed towards the center of that circle is known as Centripetal acceleration.

The centripetal acceleration is given by:

a = 4π²R/T²

Given values are:

a = 47.8 m/s²

D = 0.76 m  so , R = 0.76/2 = 0.38m

Using this formula,

47.8*T² = 4π² x0.38

T² = [tex]\frac{4*3.14^2*0.38}{47.8}[/tex]

T = 0.56 s

Therefore,

A twirlers baton is 0.76 m long and spins around its center. The end of the baton has a centripetal acceleration of 47.8 m/s2 which have  time period of 0.56 s.

Learn more about Centripetal acceleration here:

https://brainly.com/question/14465119

#SPJ5

.

We know that Period of a wave is the inverse of its Frequency

So,  Period = 1 / Frequency

From the above, we can say that Period is inversely proportional to Frequency and hence, any change in Frequency will be the inverse change in the period

Therefore, we can say that if the frequency is increased by 5 times, the period will increase by 1/5 times

Answer:

a) The kinetic energy of the particle at any time t is [tex]K = 50+120\cdot t^{2}+72\cdot t^{4}[/tex].

b) The acceleration of the particle at time t is [tex]a= 12\cdot t[/tex]. The force acting on the particle at time t is [tex]F = 48\cdot t[/tex].

c) The power being delivered to the particle at time t is [tex]\dot W = 240\cdot t +288\cdot t^{3}[/tex].

d) The work done on the particle in the interval t = 0 to t = 5 is 48000 joules.

Explanation:

a) The kinetic energy of the particle is entirely translational, whose formula is:

[tex]K = \frac{1}{2}\cdot m \cdot v^{2}[/tex] (1)

Where:

[tex]K[/tex] - Translational kinetic energy, measured in joules.

[tex]m[/tex] - Mass of the particle, measured in kilograms.

[tex]v[/tex] - Velocity of the particle, measured in meters per second.

The velocity of the particle is the rate of change of the position of the particle in time, that is:

[tex]v = 5+6\cdot t^{2}[/tex] (2)

Where [tex]t[/tex] is the time, measured in seconds.

By substituting on (1), we have the following expression: ([tex]m = 4\,kg[/tex])

[tex]K = 2\cdot (5+6\cdot t^{2})^{2}[/tex]

[tex]K = 2\cdot (25+60\cdot t^{2} +36\cdot t^{4})[/tex]

[tex]K = 50+120\cdot t^{2}+72\cdot t^{4}[/tex]

The kinetic energy of the particle at any time t is [tex]K = 50+120\cdot t^{2}+72\cdot t^{4}[/tex].

b) The acceleration of the particle is the rate of change of the velocity of the particle in time, that is:

[tex]a= 12\cdot t[/tex] (3)

Where [tex]a[/tex] is the acceleration of the particle, measured in meters per square second.

The acceleration of the particle at time t is [tex]a= 12\cdot t[/tex].

The force is obtained by multiplying (3) by the mass of the particle. That is to say: ([tex]m = 4\,kg[/tex])

[tex]F = m\cdot a[/tex] (4)

[tex]F = 48\cdot t[/tex]

The force acting on the particle at time t is [tex]F = 48\cdot t[/tex].

c) According to the Work-Energy Theorem, the change in kinetic energy of the particle equals the change in the net work done on the particle. In this case, the power is equal to the rate of change in kinetic energy.

[tex]\dot W = \dot K[/tex] (5)

[tex]\dot W = \frac{d}{dt}(50+120\cdot t^{2}+72\cdot t^{4})[/tex]

[tex]\dot W = 240\cdot t +288\cdot t^{3}[/tex]

The power being delivered to the particle at time t is [tex]\dot W = 240\cdot t +288\cdot t^{3}[/tex].

d) The work done on the particle ([tex]W[/tex]), measured in joules, is equal to the change of the kinetic energy of the particle:

[tex]W = K(5)-K(0)[/tex] (6)

[tex]W = [50+120\cdot (5)^{2}+72\cdot (5)^{4}]-[50+120\cdot (0)^{2}+72\cdot (0)^{4}][/tex]

[tex]W = 48000\,J[/tex]

The work done on the particle in the interval t = 0 to t = 5 is 48000 joules.

Answer:

2.56 nC

Explanation:

       [tex]C =\frac{Q}{V} (1)[/tex]

       [tex]Q = \sigma * A (2)[/tex]

        [tex]V = E*d (3)[/tex]

        where d is the distance between plates.

       [tex]E =\frac{\sigma}{\epsilon_{0}} (4)[/tex]

       [tex]C= \frac{\epsilon_{0}*A}{d} (5)[/tex]

        [tex]\frac{Q}{V} = \frac{\epsilon_{0}*A}{d} (6)[/tex]

       [tex]Q = \frac{\epsilon_{0}*A*V}{d} = \frac{8.85e-12F/m*(0.088m)^{2}*187 V}{5.0e-3m} = 2.56 nC[/tex]

Answer:

a.  -4.166 J/K

b. 8.37 J/K

c. 4.21 J/K

d. entropy always increases.

Explanation:

Given :

Temperature at hot reservoir , [tex]$T_h$[/tex] = 720 K

Temperature at cold reservoir , [tex]$T_c$[/tex] = 358 K

Transfer of heat, dQ = 3.00 kJ = 3000 J

(a). In the hot reservoir, the change of entropy is given by:

[tex]$dS_h= -\frac{dQ}{t_h}$[/tex]              (the negative sign shows the loss of heat)

[tex]$dS_h= -\frac{3000}{720}$[/tex]

      =  -4.166 J/K

(b)  In the cold reservoir, the change of entropy is given by:

[tex]$dS_c= \frac{dQ}{t_c}$[/tex]              

[tex]$dS_c= \frac{3000}{358}$[/tex]

      =  8.37 J/K

(c). The entropy change in the universe is given by:

[tex]$dS=dS_h+dS_c$[/tex]

    = -4.16+8.37

   = 4.21 J/K

(d). According to the concept of entropy, the entropy of the universe is always increasing and never decreasing for an irreversible process. If the entropy of universe decreases, it violates the laws of thermodynamics. Hence, in part (c), the result have to be positive.

Answer:

C + 2O ------ CO2

Explanation:

"One" element of Carbon combines with "Two" elements of Oxygen, to form "One" compound of Carbon dioxide.

I didn't really get what you meant but this is my guess of what you meant

Answer:

attract

Explanation:

that is the answer

Answer:

Attract.

Explanation:

I took the quiz.