Lab: Measuring pH Table or
Lab Report please ( just link it ) please

Answer:

a covalent would be the two that are nonmetals

Answer:

An area with the same climate, landscape, plants, and animals.

Answer:

8.26g

Explanation:

8.25g +1.50÷325k=8.26g

Answer:sun

Explanation:The Sun is the star at the center of the Solar System. It is a nearly perfect sphere of hot plasma, heated to incandescence by ... When hydrogen fusion in its core has diminished to the point at which the Sun is no longer in . Sunlight on the surface of Earth is attenuated by Earth's atmosphere, so that less power arrives

Answer:

+.0.94%

Explanation:

Relative and average atomic mass both describe properties of an element related to its different isotopes. Out of these two Relative atomic mas is more accurate. Thus the % relative error in his weight measurements is +.0.94%.

Mass defines the quantity of a substance. It is measured in gram or kilogram. Average mass is the mass of atoms of an element that are isotopes. It can be calculated by multiplying mass of a isotope to natural abundance of that isotope.

The relative mass is the mass that is with respect to mass of a matter that is considered as standard. In chemistry relative mass is equal to the mass of one-twelfth the mass of C-12 isotope .

% relative error=(Difference in weight÷ original weight)×100

Difference in weight= original weight -calculated weight

original weight=1.0755 g

calculated weight=1.0555 g

Difference in weight= 1.0755 g-1.0555 g=0.02g

% relative error=(0.02g÷ 1.0755 g)×100

                         =+.0.94%

Thus the % relative error in his weight measurements is +.0.94%.

To learn more about mass, here:

https://brainly.com/question/28704035

#SPJ2

Answer:

False

Explanation:

A liquid has a definite shape and takes on the volume of its container. A gas has both the shape and the volume of its container. The particles in a gas cannot be compressed into a smaller volume. Liquids tend to contract when heated.

Hope this helps

Answer: The change in time for the first quarter is  1.39 seconds.

The change in time for the second quarter is 0.78 seconds.

The change in time for the third quarter is 0.64 seconds.

The change in time for the fourth quarter is 0.54 seconds.  

Explanation: took info from my data and completed lab

Step 5: Measure the Speed of the Toy Car on the Higher Track

Calculate the change in time for each quarter of the track. Record the change in time in Table E of your Student Guide.

Also added the other calculations -

Calculate the average time the car took to reach each checkpoint. Record the average time in Table D of your Student Guide.

The average time to the first quarter checkpoint is 1.39 seconds.  

The average time to the second quarter checkpoint is 2.18 seconds.

The average time to the third quarter checkpoint is 2.82 seconds.

The average time to the finish line is 3.36 seconds.

Calculate the speed of the car at each checkpoint by dividing the distance between each checkpoint, in meters, by the change in time. Record your answers in Table E of your Student Guide.

The speed at the first quarter checkpoint is 1.09 m/s.  

The speed at the second quarter checkpoint is 1.95 m/s.

The speed at the third quarter checkpoint is 2.37 m/s.

The speed at the finish line is 2.80 m/s.

Please make me Brainly..:)

Answer:

1.34 mol

Explanation:

Molarity, which is the molar concentration of a solution, can be calculated by dividing the number of moles (n) by the volume (V).

That is;

Molarity (M) = n/V

According to the information provided in this question;

M = 2.40M

V = 56.0 mL = 56/1000 = 0.056 L

Since molarity = n/V

number of moles = M × V

n = 0.056 × 24

n = 1.34 mol

Answer: 1 mole =  6.02 x 10^ 23

Explanation:

The number of atoms in one mole of helium is equal to 6.022×10²³ He atoms.

Avogadro’s constant can be demonstrated as the proportionality factor that utilizes to count the number of particles such as ions, molecules, atoms, or ions in a sample of the substance.

Avogadro's number can be defined as the approximate count of nucleons in 1 gram of substance. The value of the Avogadro number is the mass of 1 mole of a compound, in grams, and is the number of nucleons in one particle.

The value of Avogadro’s number is equal to 6.022×10²³ per mole.

Given, the number of moles of the helium = 1 mol

Helium is a monatomic gas so it contains only one atom in its one molecule.

The number of atoms of Helium in one mole = 6.022 × 10²³

Therefore, the total number of atoms contained in a 1 mole sample of

helium is 6.022 × 10²³.

Learn more about Avogadro's number, here:

brainly.com/question/11907018

#SPJ6

Answer:

8Al+3Fe3O4=4Al2O3+9Fe

Answer:

8Al + 3Fe3O4 → 4Al2O3 + 9Fe

Explanation:

Answer:don’t click link ur gonna get ur info taken

Explanation:

The concept Charles's law is used here to determine the new volume. At the condition of constant pressure the new volume of the balloon is 459.54 mL.

At constant pressure, the volume of a given mass of gas is directly proportional to the temperature on Kelvin scale. Mathematically, the law can be expressed as follows:

V = constant × Temperature

V / T = Constant

V = Volume

T = Temperature

The Charles's law also explained that at -273°C, the volume of all the gases will become zero. This temperature is defined as the absolute zero.

For two different gases with volumes V₁ and V₂ and temperatures T₁ and T₂ is represented as:

V₁ / T₁ = V₂ / T₂

V₂ = V₁T₂ / T₁

222 × 62.1 / 30.0 = 459.54 mL

Thus the new volume of balloon is 459.54 mL.

To know more about Charles's law, visit;

https://brainly.com/question/16927784

#SPJ2

Answer:

न्द्न्द्ज्द्ज्फ्ज्फ्ज

Answer:

C. The wind picks up speed

Explanation:

Im not sure but i hope im correct

Btw goodluck:)

Answer:

Hello your question is incomplete attached below is the complete question

answer : 6,7-dimethyl-3-nonanone ( B )

Explanation:

The product for the following reaction sequence as attached below is

6,7-dimethyl-3-nonanone

The following reaction sequence can be categorized under Carbon Nucleophiles.

Carbon Nucleophiles which can be used to convert  aldehydes and ketones into  carboxylic acids or alkenes.

The product for the given reaction sequence is 6,7-dimethyl-3-nonanone.

IUPAC (International Union of Pure and Applied Chemistry) naming is a systematic method used to name chemical compounds according to a set of rules established by the IUPAC.

The purpose of IUPAC naming is to provide a consistent and unambiguous way to communicate the structure of a compound through its name.

The outcome of the subsequent chain of reactions, which is appended below, is 6,7-dimethyl-3-nonanone

Under the heading of Carbon Nucleophiles, the following reaction chain can be categorised.

Aldehydes and ketones can be transformed into carboxylic acids or alkenes using carbon nucleophiles.

Thus, the answer is 6,7-dimethyl-3-nonanone.

For more details regarding IUPAC naming, visit:

https://brainly.com/question/16631447

#SPJ6

Your question seems incomplete, the probable complete question is:

Answer:

[tex]Kc=\frac{[HI]^2}{[I_2][H_2]}[/tex]

Explanation:

Hello there!

In this case, for these equilibrium problems it is firstly necessary to know the balanced reaction at equilibrium:

H2((g) + I2(g) ⇋ 2HI(g)

Next, by means of the law of mass action, it turns out possible for us to write the required and correct expression for the equilibrium constant by considering the concentrations and the coefficients in the aforementioned reaction:

[tex]Kc=\frac{[HI]^2}{[I_2][H_2]}[/tex]

Best regards!

Answer:

Phenol is more acidic than alcohol due to resonance stabilization of the phenoxide ion.

Answer:

0.29 atm

Explanation: add both partial pressure and subtract from total pressure

this is true, wind energy is a renewable natural resource c:

Convection currents in the mantle, I got it right on a p e x

Answer:

The pigment that causes leaves to be green is chlorophyll. ... As chlorophyll goes away, other pigments start to show their colors. This is why leaves turn yellow or red in fall. In fall, plants break down and reabsorb chlorophyll, letting the colors of other pigments show through.

Answer:

Linoleic acid is omega-6 fatty acid, Oleic acid is omega-9 fatty acid and Palmitic acid  is omega-7 fatty acid

Explanation:

Linoleic acid is omega-6 fatty acid which is not naturally produced by the body while Oleic acid is omega-9 fatty acid which occurs naturally in various animal and vegetable fats and oils.  

As compared to oleic acid, Linoleic acid is lightweight and thin.  

Palmitic acid  is omega-7 monounsaturated fatty acid which occurs naturally and is found in plant and marine sources.  

Palmitic acid is lighter than both the oleic acid and Linoleic acid

Answer: The percent yield of the reaction is 83.5 %

Explanation:

The given balanced equation is

[tex]SiO_2+3C\rightarrow SiC+2CO[/tex]

[tex]SiO_2[/tex] is the limiting reagent as it limits the formation of product and [tex]C[/tex] is the excess reagent.

According to stoichiometry :

60.08 g of [tex]SiO_2[/tex] produce = 40.11 of [tex]SiC[/tex]

Thus 50.0 of [tex]SiO_2[/tex] will produce=[tex]\frac{40.11}{60.08}\times 50.0=33.4[/tex]  of [tex]SiC[/tex]

 Experimental yield of SiC = 27.9 g

Percent yield = [tex]\frac{\text {Experimental yield}}{\text {theoretical yield}}\times 100=\frac{27.9g}{33.4g}\times 100=83.5\%[/tex]

Thus  percent yield of the reaction is 83.5 %

The percent yield of 83.5 % of 50.0 g of silicon dioxide is heated with an excess of carbon, and 27.9 g of silicon carbide is produced in the reaction.

The chemical equations are balanced when the reactants react to form products. The reactants and products react in proper ratios and if they are not in ratio then we balance them by adding the required quantity in the reactants and the products.

The given balanced equation is

[tex]\rm SiO_2+3C---- > SiC+2CO[/tex]

[tex]SiO_2[/tex] is the limiting reagent as it limits the formation of product and is the excess reagent.

According to stoichiometry

60.08 g [tex]SiO_2[/tex] of  produce = 40.11 of [tex]SiC[/tex]

Thus 50.0 of  [tex]SiO_2[/tex] will produce=  [tex]\dfrac{40.11}{60.08} \times 50=33.4\ SiC[/tex]

The experimental yield of SiC = 27.9 g

The percentage yield will be calculated as

[tex]\rm Percentage \ Yield = \frac{Experimental\ yield}{Theoretical \ yield }\times 100[/tex]

[tex]\rm Percentage \ yield =\dfrac{27.9}{33.49} \times 100=83.5[/tex]

Thus the percent yield of 83.5 % of 50.0 g of silicon dioxide is heated with an excess of carbon, and 27.9 g of silicon carbide is produced in the reaction.

To know more about balanced chemical equations follow

https://brainly.com/question/26227625

Answer:

substances is never entirely a one way

Explanation:

no possibility of obtaining complete combustion at hig

temperature.

always loss of heat from the temperature

its temperature is lower than the constant volume process because some of the energy is utilized to change the volume of the system

Four reasons why the temperature of flame is lower than adiabatic flame temperature is that there is  no possibility of obtaining complete combustion at high temperature due to high thermal energy.There is always loss of heat from temperature,its temperature is lower than constant volume process because some of  energy is utilized to change the volume of the system.

Thermal energy is defined as a type of energy which is contained within a system which is responsible for temperature rise.Heat is a type of thermal energy.It is concerned with the first law of thermodynamics.

Thermal energy arises from friction and drag.It includes the internal energy or enthalpy of a body of matter and radiation.It is related to internal energy and heat .It arises when a substance whose molecules or atoms are vibrating faster.

These vibrating molecules and atoms collide and as a result of which heat is generated in a substance , more the collision of particles , higher is the thermal energy.

Learn more about thermal energy,here:

https://brainly.com/question/18989562

#SPJ2

Answer:

80 mL

Explanation:

Step 1: Given data

Step 2: Calculate the final volume of hydrogen

If we assume ideal behavior and constant temperature, we can calculate the final volume occupied by hydrogen using Boyle's law.

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁/P₂

V₂ = 360 mmHg × 240 mL/1080 mmHg = 80 mL

Answer:

c.convention currents

Explanation:

As hot air cools it sinks back to the surface of the earth, where it gets warmed by the ocean only to rise again.This is called a convection current.

Answer:

0.550 M HCl

Explanation:

M1V1 = M2V2

M1 = 0.455 M NaOH

V1 = 14.50 mL NaOH

M2 = ?

V2 = 12.0 mL HCl

Solve for M2 --> M2 = M1V1/V2

M2 = (0.455 M)(14.50 mL) / (12.0 mL) = 0.550 M HCl

Answer:

The appropriate answer is "0.549 M".

Explanation:

The given values are:

N₁ = 14.50 mL

V₁ = 0.455 M

N₂ = 12 mL

Let

V₂ = C = ?

As we know,

⇒  [tex]N_1\times V_1=N_2\times V_2[/tex]

On substituting the values, we get

⇒  [tex]14.50\times 0.455 = 12\times C[/tex]

⇒            [tex]6.5975=12\times C[/tex]

⇒                   [tex]C=\frac{6.5975}{12}[/tex]

⇒                       [tex]=0.549 \ M[/tex]