Match each type of mass movement to its description.
the rapid downhill flow of a mixture of rock,
soil, and water
slump
mudflow
the slow downhill movement of rock and soil
creep
the rapid downhill movement of a mass of
rock, debris, or soil
landslide
a loosely connected mass of rock and soil
that moves a short distance

The student can claim: We can’t know for sure whether or not the mass changed, but it seems reasonable to claim that the mass did not change, given that the ranges of uncertainty overlap.

Since the student used the same electronic balance with an uncertainty of 0.05g to measure the mass of the solution before and after chemical reaction, the conclusion is that the masses are the same within the uncertainty of the balance.

+- value is uncertainty value of measurement.

Accuracy is the closeness of a measurement to the true value.

Balance is an instrument for comparing the mass of two bodies.

The percent error is an error between an observed value and the true value of a measurement.

Percent Error = (Actual Value - Estimated Value / Actual Value) × 100%

There are three types of error in chemistry: gross errors, random errors and systematic errors.

Missing options:

The mass definitely stayed the same because the measurement of 50.25 g was obtained each time.

The mass definitely stayed the same because the ranges of uncertainty overlap exactly.

We can’t know for sure whether or not the mass changed, but it seems reasonable to claim that the mass did not change, given that the ranges of uncertainty overlap.

More about accuracy: brainly.com/question/27912213

#SPJ4

Answer:

8,300

Explanation:

925*9 is 8325.

After you round to the nearest hundred, its 8,300.

Answer:

Explanation:

eggggggggggg

Answer:

The Earth's interior is composed of four layers, three solid and one liquid—not magma but molten metal, nearly as hot as the surface of the sun.

The deepest layer is a solid iron ball, about 1,500 miles (2,400 kilometers) in diameter. Although this inner core is white hot, the pressure is so high the iron cannot melt.

The iron isn't pure—scientists believe it contains sulfur and nickel, plus smaller amounts of other elements. Estimates of its temperature vary, but it is probably somewhere between 9,000 and 13,000 degrees Fahrenheit (5,000 and 7,000 degrees Celsius).

Above the inner core is the outer core, a shell of liquid iron. This layer is cooler but still very hot, perhaps 7,200 to 9,000 degrees Fahrenheit (4,000 to 5,000 degrees Celsius). It too is composed mostly of iron, plus substantial amounts of sulfur and nickel. It creates the Earth's magnetic field and is about 1,400 miles (2,300 kilometers) thick.

You can get more info, in national geographic.

https://www.nationalgeographic.com/science/article/earths-interior

While burning coal and charcoal, you notice that coal releases more heat than charcoal. This means that the chemical potential energy in coal is higher than that of charcoal.

Combustion or burning occurs when a substance reacts with oxygen. This reaction is highly exothermic and releases high amounts of energy in the form of heat, light and sound. The amount of energy released depends on the potential chemical energy stored in the substance.

Potential chemical energy is the energy stored in a combustible substance that gets converted to heat, light and sound energy while the substance burns. The more potential chemical energy a substance has, the more energy it expels while burning.

Hence, while burning coal and charcoal, coal will release more heat energy because its potential chemical energy is higher than that of charcoal.

Learn more about potential chemical energy here:

https://brainly.com/question/11440456

#SPJ4

The henry constant (Kh) is found to be  9.69 X 10⁻⁴moles/L atm .

The solubility of O₂ is 6.5 mg/l Or 0.0065 g/L

First we convert solubility into moles/L by dividing by molecular mass of O₂ (32 g/mole)

solubility = 0.0065/32 moles/L = 0.000203 moles/L

henry's law can be calculated by the formula, c = Kh X p , where x = mole fraction and p is partial pressure of gas, Kh is henrys constant and c is concentration.

On assuming, the percentage of oxygen in atmosphere is 20.95% and pressure is 1 atm

so partial pressure of O₂ = 20.95/100 X 1 = 0.2095 atm ( partial pressure = mole fraction X total pressure)

so now Kh = 0.000203/0.2095 = 0.000969 moles/L atm or 9.69 X 10⁻⁴ moles/L atm.

The quantity of dissolved gas in a liquid is inversely proportional to the partial pressure of the gas above the liquid, according to Henry’s law also called as Gas law. Henry constant mostly depend on the vapour pressue and solubility of the gas.

To learn more about Henry law, refer this link.

https://brainly.com/question/14086507

#SPJ4

In 1897 the theory of understanding the energetics and arrangement of atoms was developed by Josheph Larmor.

It is also called solar system model of atom.

The “solar system” model indicates an atom as a whole massive positive body that is the nucleus similar to the sun in the solar system with negative entities that are the electrons as the planets in our solar system revolving around it.

The thought about this model is that the electrons which revolves around the nucleus are the charged particles which have centripetal acceleration during the revolution. Even if they all are travelling at the same velocity in modulus, the trajectory of their velocity varies with respect to time which resulting in the centripetal acceleration. An accelerated charge particle will emit energy in the form of electromagnetic radiation. This results in the loss of energy which causes the charged particle to fall inside the nucleus. Therefore, this fails to happen.

Thus, we concluded that In 1897 the theory of understanding the energetics and arrangement of atoms was developed.

learn more about Models of atom:

https://brainly.com/question/11482705

#SPJ4

Answer:

(a) protons: 11 electrons:11

(b) protons: 56 electrons: 54

(c) protons: 8 electrons: 10

(d) protons: 27 electrons: 24

Explanation:

In the bicarbonate buffering system, carbon dioxide and water join to form carbonic acid, which dissociates into hydrogen and bicarbonate.

A buffering system can be defined as a complex solution that serves to buffer sudden changes in the pH of a given solution, which is fundamental to maintaining homeostasis.

In conclusion, in the bicarbonate buffering system, carbon dioxide and water join to form carbonic acid, which dissociates into hydrogen and bicarbonate.

Learn more about buffering systems here:

https://brainly.com/question/11033169

#SPJ1

Answer:

pour the rock salt mixture through a filter made from paper and allow the liquid to filtrate

Explanation:

Separating Sand and Salt

Probably the easiest method to separate the two substances is to dissolve salt in water, pour the liquid away from the sand, and then evaporate the water to recover the salt.

Filtration is useful for separating solids from liquids or gases compounds (option A).

Filtration is the act or process of filtering or in chemistry, it is the mechanical separation of a liquid from the undissolved particles floating in it.

Filtration is a common separation technique employed in chemistry for the partitioning of an undissolved solid from a liquid solvent.

For example; when a mixture of sand and water is filtered, the sand stays behind in the filter paper as the residue while the water passes through the filter paper to become the filtrate.

Therefore, it can be said that filtration is useful for separating solids from liquids or gases compounds.

Learn more about filtration at: https://brainly.com/question/14530470

#SPJ1

Answer:

Solids from liquids or gases

Explanation:

Connexus

A change will only occur one time in unidirectional.

Because

Cyclic : Cyclic compounds are chemical compounds having a basic non-linear structure. In other words, these are ring structures. One or more series of atoms in the compound is connected to form a ring structure.

Periodic : The periodic table of chemical elements, often called the periodic table, organizes all discovered chemical elements in rows (called periods) and columns (called groups) according to increasing atomic number.

Unidirectional : compound is operating or moving in one direction only and it does not move in other direction.

Bidirectional : Capable of reacting or functioning in two, usually opposite, directions.

Thus, A change will only occur one time in unidirectional.

Learn more about Chemical Compound are:

https://brainly.com/question/26487468

#SPJ4

Answer:

Glucose will enter the cell through osmosis.

Explanation:

Diffusion causes molecules to move from high concentration to low concentration, so the glucose molecules outside the cell will move through the membrane to inside of the cell.

Answer:

step 1- wash the rice cooker

step2-

The amount of each type required to yield a mixture containing the pounds of nitrogen, pounds of phosphoric acid, and pounds of potash is y = 5 bags, x = 3 bags.

Fertilizers are any material of natural or synthetic origin that is applied to soil or to plant tissues to supply plant nutrients.

177 pounds = 29x + 18y (1)

Where x is bags of Vigor Ultra Turf fertilizer and y are bags of  Parkers Premium Starte-

For P₂O₅:

134 pounds = 3x + 25y (2)

For K₂O:

42 pounds = 4x + 6y (3)

Replacing (1) in (2):

134 = (531/29 - 54y/29) + 25y

3355/29 = 671y/29

Thus, y = 5 bags, x = 3 bags.

To learn more about fertilizers, refer to the link:

https://brainly.com/question/3204813

#SPJ4

Carrier proteins serve many purposes in the purposes in the attempt to move molecules across a plasma membrane.

Carrier proteins are proteins which are found n the surfaces of cell membranes which serve the function of transporting molecules across the cell membrane barrier.

The carrier proteins transport various molecules across the cell membrane.

Carrier proteins transport such molecules as sugars, proteins, ions, lipids across the membrane.

Some carrier proteins expend energy in the form of ATP when they transport molecules across the cell membrane.

Some use the concentration gradient of cells to transport molecules across the cell membrane.

The carrier proteins which expend energy to transport molecules are involved in active transport.

The carrier proteins that do not expend energy are involved in passive transport.

In conclusion, carrier proteins are essential in the transport of molecules across the plasma membrane.

Learn more about carrier proteins at: https://brainly.com/question/5556977

#SPJ1

Answer:

it will be 60 day

Explanation:

Answer: monomers

Explanation: Most macromolecules are made from single subunits, or building blocks, called monomers. The monomers combine with each other using covalent bonds to form larger molecules known as polymers.

Answer:  0.0201 km per second

Explanation:

45 miles per hour = 0.0125 miles per second = 0.0201 km per second

The amount of sodium hydroxide required to complete the reaction is 0.005 moles.

Mole can be defined as a standard scientific unit for measuring large qualities of very small entities such as atom , molecules etc,

Moles can be calculated as mass of substance divided by mass of one mole.

1cm3 = 0.001 dm3

20cm3 = 0.02 dm3

To calculate amount of mole of sodium hydroxide first we have to calculate mass of tatraoxosulphate.

Molarity = mass/ volume

Mass = molarity x volume = 0.125 x 0.02 = 0.0025

2NaOH + H2SO4 -> Na2SO4 + 2H2O

Amount of moles of NaOH  = 2 x mass of tatraoxosulphate

                                              = 2 x 0.0025 = 0.005 moles

Thus, the amount of sodium hydroxide required to complete the reaction is 0.005 moles.

To learn more about mole, refer to the link below:

https://brainly.com/question/26416088

#SPJ1

2CH3OH()+302(g) → 2C02(g) + 4H₂O(l) is the reaction which shows a chemical change producing a gas.

One or more chemicals change into one or more other chemicals in a chemical reaction. A chemical reaction is the transformation of one or more substances, known as reactants, into one or more new substances, known as products. Chemical components or compounds make up substances. For instance, rust is created when iron and oxygen combine. When vinegar and baking soda are combined, sodium acetate, carbon dioxide, and water are the results. things igniting or detonating.

There are five types of chemical reaction that occur generally, they are

Single displacement, double displacement, combustion, combination or synthesis, and decomposition.

To know more about reaction :

https://brainly.com/question/17434463

#SPJ9

The calibration curve is used to determine the concentration of an unknown solution​.

A spectrophotometer is a device in which the absorbance of a substance could be measured. The absorbance refers to the amount of light that could be passed through a substance.

What we do is to first select the appropriate wavelength the would be used for the study. The absorbance of the solvent without the analyte is first measured. This is called the sample blank. Then several selected concentrations of the analyte is made to interact with light in the spectrophotometer and the absorbance is measured.

This is now used to create a line of best fit called calibration curve that could be used to determine the absorbance of any other concentration of the same solution.

Learn more about a spectrophotometer:https://brainly.com/question/24195565

#SPJ1

Its D - ensure that his conclusion is supported by evidence. Skepticism will help him remain objective towards the experiment and not become biased and believe that his finding is correct just because he worked on them.

Each molecule of water consists of one atom of oxygen and two atoms of hydrogen, so it has the chemical formula H2O. The arrangement of atoms in a water molecule, explains many of the water’s chemical properties. In each water molecule, the nucleus of the oxygen atom (with 8 positively charged protons) attracts electrons much more strongly than the hydrogen nuclei (with only one positively charged proton).

This results in a negative electrical charge near the oxygen atom (due to the "pull" of the negatively charged electrons toward the oxygen nucleus) and a positive electrical charge near the hydrogen atoms. A difference in electrical charge between different parts of a molecule is called polarity. A polar molecule is a molecule in which part of the molecule is positively charged and part of the molecule is negatively charged.

For more information on skepticism click on the link below:

https://brainly.com/question/12560960

#SPJ4

Answer: Either b or c or d. More information is needed to answer the question.

Answer:

Mixture because it isn't chemically combined

Isotope of phosphorus containing 19 neutrons can represented as ²⁴₁₅P.

Isotopes are those atoms of the same elements that have same number of protons or same atomic number but different mass  number.

Atomic number = number of protons in the atom = number of electrons in the neutral atom

Mass number = number of protons + number of neutrons

Mass number is represented as Z

Atomic number is represented as A.

While writing the symbol of an atom the mass number is written on the left and side and as a superscript to the symbol of the atom and atomic number is written to the left and as a subscript to the symbol.

No, hurricane won't loose strength when the winds are strong.

It's because If wind conditions are okay, the storm becomes a hurricane. This heat energy is the energy for the storm. And the warmer the water, the further humidity is in the air. And that could mean bigger and stronger hurricanes.

Hurricanes increases their speed their strength because Warmer ocean face temperatures consolidate tropical storm wind pets.

These are the top 3 factors for hurricane development

Warm ocean water

Wind shear

humidity content

If hurricanes snappily lose strength as they move over land it's only because of the Friction with Land.

To know more about Hurricanes here :

https://brainly.com/question/18950883?referrer=searchResults

#SPJ1

As ,in diagram D we can see that there are only one type of atoms are joined, so they are pure substances. The particle of diagrams that represent a pure substance is Option D.

The substance which is made up of only one kind of particle and cannot be separated into other kind of matter is called Pure substance.

Example: Gold metal, sugar, salt, copper wire, diamond etc.

These substance are of two types

So, we are going to find out the pure substance from the below diagrams.  All other are mixtures having different kind of element.

Thus from the above conclusion we can say that the option D represents pure substance.

Learn more about Pure Substance here: https://brainly.com/question/18452279

#SPJ9

The periodic table is an arrangement of the elements in order of increasing reactivity. The elements that are more reactive are found at the left hand side of the table among the metals. The reactive non metals are found at the right hand side of the table.

Learn more about the periodic table:https://brainly.com/question/11155928

#SPJ1

Answer:

ok so what is the question?

Answer:

Yes, its carried out under carefully controlled conditions because it might some times have a negative impacts towards humans.